drm/i915: Kill sink_crc for good
Subsystems (2)
Rodrigo Vivi
maintainerPATCH 1/1 drm/i915: Kill sink_crc for good
It was originally introduced following the VESA spec in order to validate PSR.
However we found so many issues around sink_crc that instead of helping PSR development it only brought another layer of trouble to the table.
So, sink_crc has been a black whole for us in question of time, effort and hope.
First of the problems is that HW statement is clear: "Do not attempt to use aux communication with PSR enabled". So the main reason behind sink_crc is already compromised.
For a while we had hope on the aux-mutex could workaround this problem on SKL+ platforms, but that mutex was not reliable, not tested,
and we shouldn't use according to HW engineers.
Also, nor source, nor sink designed and implemented the sink_crc to be used like we are trying to use here.
Well, the sink side of things is also apparently not prepared for this case. Each panel that we tried seemed to have a different behavior with same code and same source.
So, for all the time we lost on trying to ducktape all these different issues I believe it is now time to move PSR to a more reliable validation. Maybe not a perfect one as we dreamed for this sink_crc, but at least more reliable.
--- drivers/gpu/drm/i915/i915_debugfs.c | 81 ------------------ drivers/gpu/drm/i915/intel_dp.c | 123 ---------------------------- drivers/gpu/drm/i915/intel_drv.h | 2 - 3 files changed, 206 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +0 -81
@@ -2761,86 +2761,6 @@ DEFINE_SIMPLE_ATTRIBUTE(i915_edp_psr_debug_fops, i915_edp_psr_debug_get, i915_edp_psr_debug_set, "%llu\n"); -static int i915_sink_crc (struct seq_file *m,void *data) -{ -struct drm_i915_private *dev_priv =node_to_i915 (m->private); -struct drm_device *dev = &dev_priv->drm; -struct intel_connector *connector; -struct drm_connector_list_iter conn_iter; -struct intel_dp *intel_dp =NULL ; -struct drm_modeset_acquire_ctx ctx; -int ret; -u8 crc[6 ]; - -drm_modeset_acquire_init (&ctx,DRM_MODESET_ACQUIRE_INTERRUPTIBLE ); - -drm_connector_list_iter_begin (dev, &conn_iter); - -for_each_intel_connector_iter (connector, &conn_iter) { -struct drm_crtc *crtc; -struct drm_connector_state *state; -struct intel_crtc_state *crtc_state; - -if (connector->base.connector_type != DRM_MODE_CONNECTOR_eDP) -continue ; - -retry: - ret =drm_modeset_lock (&dev->mode_config.connection_mutex, &ctx); -if (ret) - goto err; - - state = connector->base.state; -if (!state->best_encoder) -continue ; - - crtc = state->crtc; - ret =drm_modeset_lock (&crtc->mutex, &ctx); -if (ret) - goto err; - - crtc_state =to_intel_crtc_state (crtc->state); -if (!crtc_state->base.active) -continue ; - -/* -* We need to wait for all crtc updates to complete, to make -* sure any pending modesets and plane updates are completed. -*/ -if (crtc_state->base.commit) { - ret =wait_for_completion_interruptible (&crtc_state->base.commit->hw_done); - -if (ret) - goto err; - } - - intel_dp =enc_to_intel_dp (state->best_encoder); - - ret =intel_dp_sink_crc (intel_dp, crtc_state, crc); -if (ret) - goto err; - -seq_printf (m,"%02x%02x%02x%02x%02x%02x\n" , - crc[0 ], crc[1 ], crc[2 ], - crc[3 ], crc[4 ], crc[5 ]); - goto out; - -err: -if (ret == -EDEADLK ) { - ret =drm_modeset_backoff (&ctx); -if (!ret) - goto retry; - } - goto out; - } - ret = -ENODEV ; -out: -drm_connector_list_iter_end (&conn_iter); -drm_modeset_drop_locks (&ctx); -drm_modeset_acquire_fini (&ctx); - -return ret; -} -static int i915_energy_uJ (struct seq_file *m,void *data) {struct drm_i915_private *dev_priv =node_to_i915 (m->private);
@@ -4784,7 +4704,6 @@ static const struct drm_info_list i915_debugfs_list[] = { {"i915_ppgtt_info", i915_ppgtt_info, 0}, {"i915_llc", i915_llc, 0}, {"i915_edp_psr_status", i915_edp_psr_status, 0}, - {"i915_sink_crc_eDP1", i915_sink_crc, 0}, {"i915_energy_uJ", i915_energy_uJ, 0}, {"i915_runtime_pm_status", i915_runtime_pm_status, 0}, {"i915_power_domain_info", i915_power_domain_info, 0},
drivers/gpu/drm/i915/intel_dp.c +0 -123
129 lines not on this page · raw message
drivers/gpu/drm/i915/intel_drv.h +0 -2
@@ -1665,8 +1665,6 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);void intel_dp_encoder_reset (struct drm_encoder *encoder);void intel_dp_encoder_suspend (struct intel_encoder *intel_encoder);void intel_dp_encoder_destroy (struct drm_encoder *encoder); -int intel_dp_sink_crc (struct intel_dp *intel_dp, -struct intel_crtc_state *crtc_state,u8 *crc);bool intel_dp_compute_config (struct intel_encoder *encoder,struct intel_crtc_state *pipe_config,struct drm_connector_state *conn_state);
Signature · 6 lines
2.17.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 20 lines · PDT Rodrigo Vivi
It was originally introduced following the VESA spec in order to validate PSR.
However we found so many issues around
sink_crcthat instead of helping PSR development it only brought another layer of trouble to the table.So,
sink_crchas been a black whole for us in question of time, effort and hope.First of the problems is that HW statement is clear: "Do not attempt to use aux communication with PSR enabled". So the main reason behind
sink_crcis already compromised.For a while we had hope on the aux-mutex could workaround this problem on SKL+ platforms, but that mutex was not reliable, not tested, and we shouldn't use according to HW engineers.
Also, nor source, nor sink designed and implemented the
sink_crcto be used like we are trying to use here.
Quoted 9 lines
Well, the sink side of things is also apparently not prepared for this case. Each panel that we tried seemed to have a different behavior with same code and same source.
So, for all the time we lost on trying to ducktape all these different issues I believe it is now time to move PSR to a more reliable validation. Maybe not a perfect one as we dreamed for this
sink_crc, but at least more reliable.
Good riddance.
Quoted 144 lines
Cc Dhinakaran Pandiyan <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/i915_debugfs.c | 81 ------------------ drivers/gpu/drm/i915/intel_dp.c | 123 ---------------------------- drivers/gpu/drm/i915/intel_drv.h | 2 - 3 files changed, 206 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/i915/i915_debugfs.cindexf6142d78ede4..e8fa106a3655100644drivers/gpu/drm/i915/i915_debugfs.c +0
-47@@ -2761,86 +2761,6 @@ DEFINE_SIMPLE_ATTRIBUTE(i915_edp_psr_debug_fops, i915_edp_psr_debug_get, i915_edp_psr_debug_set, "%llu\n"); -static int i915_sink_crc (struct seq_file *m,void *data) -{ -struct drm_i915_private *dev_priv =node_to_i915 (m->private); -struct drm_device *dev = &dev_priv->drm; -struct intel_connector *connector; -struct drm_connector_list_iter conn_iter; -struct intel_dp *intel_dp =NULL ; -struct drm_modeset_acquire_ctx ctx; -int ret; -u8 crc[6 ]; - -drm_modeset_acquire_init (&ctx,DRM_MODESET_ACQUIRE_INTERRUPTIBLE ); - -drm_connector_list_iter_begin (dev, &conn_iter); - -for_each_intel_connector_iter (connector, &conn_iter) { -struct drm_crtc *crtc; -struct drm_connector_state *state; -struct intel_crtc_state *crtc_state; - -if (connector->base.connector_type != DRM_MODE_CONNECTOR_eDP) -continue ; - -retry: - ret =drm_modeset_lock (&dev->mode_config.connection_mutex, &ctx); -if (ret) - goto err; - - state = connector->base.state; -if (!state->best_encoder) -continue ; - - crtc = state->crtc; - ret =drm_modeset_lock (&crtc->mutex, &ctx); -if (ret) - goto err; - - crtc_state =to_intel_crtc_state (crtc->state); -if (!crtc_state->base.active) -continue ; - -/* -* We need to wait for all crtc updates to complete, to make -* sure any pending modesets and plane updates are completed. -*/ -if (crtc_state->base.commit) { - ret =
wait_for_completion_interruptible(&crtc_state->base.commit->hw_done); -drivers/gpu/drm/i915/i915_debugfs.c +0
-33-if (ret) - goto err; - } - - intel_dp =enc_to_intel_dp (state->best_encoder); - - ret =intel_dp_sink_crc (intel_dp, crtc_state, crc); -if (ret) - goto err; - -seq_printf (m,"%02x%02x%02x%02x%02x%02x\n" , - crc[0 ], crc[1 ], crc[2 ], - crc[3 ], crc[4 ], crc[5 ]); - goto out; - -err: -if (ret == -EDEADLK ) { - ret =drm_modeset_backoff (&ctx); -if (!ret) - goto retry; - } - goto out; - } - ret = -ENODEV ; -out: -drm_connector_list_iter_end (&conn_iter); -drm_modeset_drop_locks (&ctx); -drm_modeset_acquire_fini (&ctx); - -return ret; -} -static int i915_energy_uJ (struct seq_file *m,void *data) {struct drm_i915_private *dev_priv =node_to_i915 (m->private);@@ -4784,7 +4704,6 @@ static const struct drm_info_list i915_debugfs_list[] = { {"i915_ppgtt_info", i915_ppgtt_info, 0}, {"i915_llc", i915_llc, 0}, {"i915_edp_psr_status", i915_edp_psr_status, 0}, - {"i915_sink_crc_eDP1", i915_sink_crc, 0}, {"i915_energy_uJ", i915_energy_uJ, 0}, {"i915_runtime_pm_status", i915_runtime_pm_status, 0}, {"i915_power_domain_info", i915_power_domain_info, 0},(quoted diff) +0
-0
b/drivers/gpu/drm/i915/intel_dp.cindex5be07e1d816d..efdd4b408d51100644drivers/gpu/drm/i915/intel_dp.c +0
-27@@ -3905,129 +3905,6 @@ intel_dp_configure_mst(struct intel_dp *intel_dp) intel_dp->is_mst); } -static int intel_dp_sink_crc_stop (struct intel_dp *intel_dp, -struct intel_crtc_state *crtc_state,bool disable_wa) -{ -struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp); -struct drm_i915_private *dev_priv =to_i915 (dig_port->base.base.dev); -struct intel_crtc *intel_crtc =to_intel_crtc (crtc_state->base.crtc); -u8 buf; -int ret =0 ; -int count =0 ; -int attempts =10 ; - -if (drm_dp_dpcd_readb (&intel_dp->aux,DP_TEST_SINK , &buf) <0 ) { -DRM_DEBUG_KMS ("Sink CRC couldn't be stopped properly\n" ); - ret = -EIO ; - goto out; - } - -if (drm_dp_dpcd_writeb (&intel_dp->aux,DP_TEST_SINK , - buf & ~DP_TEST_SINK_START ) <0 ) { -DRM_DEBUG_KMS ("Sink CRC couldn't be stopped properly\n" ); - ret = -EIO ; - goto out; - } - - do { - intel_wait_for_vblank(dev_priv, intel_crtc->pipe); -
drivers/gpu/drm/i915/intel_dp.c intel_dp_configure_mst(struct intel_dp *intel_dp) · line 3944
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp.c +0
-10-if (drm_dp_dpcd_readb (&intel_dp->aux, -DP_TEST_SINK_MISC , &buf) <0 ) { - ret = -EIO ; - goto out; - } - count = buf &DP_TEST_COUNT_MASK ; - }while (--attempts && count); - -if (attempts ==0 ) { - DRM_DEBUG_KMS("TIMEOUT: Sink CRC counter is not zeroed after
calculation
Quoted 94 lines
drivers/gpu/drm/i915/intel_dp.c +0
-84is stopped\n"); - ret = -ETIMEDOUT; - } - - out: -if (disable_wa) -hsw_enable_ips (crtc_state); -return ret; -} - -static int intel_dp_sink_crc_start (struct intel_dp *intel_dp, -struct intel_crtc_state *crtc_state) -{ -struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp); -struct drm_i915_private *dev_priv =to_i915 (dig_port->base.base.dev); -struct intel_crtc *intel_crtc =to_intel_crtc (crtc_state->base.crtc); -u8 buf; -int ret; - -if (drm_dp_dpcd_readb (&intel_dp->aux,DP_TEST_SINK_MISC , &buf) <0 ) -return -EIO ; - -if (!(buf &DP_TEST_CRC_SUPPORTED )) -return -ENOTTY ; - -if (drm_dp_dpcd_readb (&intel_dp->aux,DP_TEST_SINK , &buf) <0 ) -return -EIO ; - -if (buf &DP_TEST_SINK_START ) { - ret =intel_dp_sink_crc_stop (intel_dp, crtc_state, false); -if (ret) -return ret; - } - -hsw_disable_ips (crtc_state); - -if (drm_dp_dpcd_writeb (&intel_dp->aux,DP_TEST_SINK , - buf |DP_TEST_SINK_START ) <0 ) { -hsw_enable_ips (crtc_state); -return -EIO ; - } - -intel_wait_for_vblank (dev_priv, intel_crtc->pipe); -return 0 ; -} - -int intel_dp_sink_crc (struct intel_dp *intel_dp,struct intel_crtc_state *crtc_state, u8 *crc) -{ -struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp); -struct drm_i915_private *dev_priv =to_i915 (dig_port->base.base.dev); -struct intel_crtc *intel_crtc =to_intel_crtc (crtc_state->base.crtc); -u8 buf; -int count, ret; -int attempts =6 ; - - ret =intel_dp_sink_crc_start (intel_dp, crtc_state); -if (ret) -return ret; - -do { -intel_wait_for_vblank (dev_priv, intel_crtc->pipe); - -if (drm_dp_dpcd_readb (&intel_dp->aux, -DP_TEST_SINK_MISC , &buf) <0 ) { - ret = -EIO ; - goto stop; - } - count = buf &DP_TEST_COUNT_MASK ; - - }while (--attempts && count ==0 ); - -if (attempts ==0 ) { -DRM_ERROR ("Panel is unable to calculate any CRC after 6 vblanks\n" ); - ret = -ETIMEDOUT ; - goto stop; - } - -if (drm_dp_dpcd_read (&intel_dp->aux,DP_TEST_CRC_R_CR , crc,6 ) <0 ) { - ret = -EIO ; - goto stop; - } - -stop: -intel_dp_sink_crc_stop (intel_dp, crtc_state, true); -return ret; -} -static bool intel_dp_get_sink_irq (struct intel_dp *intel_dp,u8 *sink_irq_vector) {(quoted diff) +0
-0
b/drivers/gpu/drm/i915/intel_drv.hindexe09b42d91d1e..8e6ee2fe66e4100644
drivers/gpu/drm/i915/intel_drv.h void intel_dp_sink_dpms(struct intel_dp *intel_dp, int · line 1670
Quoted 8 lines
drivers/gpu/drm/i915/intel_drv.h +0
-2@@ -1665,8 +1665,6 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode); void intel_dp_encoder_reset(struct drm_encoder *encoder);void intel_dp_encoder_suspend (struct intel_encoder *intel_encoder);void intel_dp_encoder_destroy (struct drm_encoder *encoder); -int intel_dp_sink_crc (struct intel_dp *intel_dp, -struct intel_crtc_state *crtc_state,u8 *crc);bool intel_dp_compute_config (struct intel_encoder *encoder,struct intel_crtc_state *pipe_config,struct drm_connector_state *conn_state);
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerQuoted 25 lines · Dhinakaran Pandiyan
Quoted 24 lines · PDT Rodrigo Vivi
It was originally introduced following the VESA spec in order to validate PSR.
However we found so many issues around
sink_crcthat instead of helping PSR development it only brought another layer of trouble to the table.So,
sink_crchas been a black whole for us in question of time, effort and hope.First of the problems is that HW statement is clear: "Do not attempt to use aux communication with PSR enabled". So the main reason behind
sink_crcis already compromised.For a while we had hope on the aux-mutex could workaround this problem on SKL+ platforms, but that mutex was not reliable, not tested, and we shouldn't use according to HW engineers.
Also, nor source, nor sink designed and implemented the
sink_crcto be used like we are trying to use here.Well, the sink side of things is also apparently not prepared for this case. Each panel that we tried seemed to have a different behavior with same code and same source.
Quoted 6 lines
Quoted 5 lines
So, for all the time we lost on trying to ducktape all these different issues I believe it is now time to move PSR to a more reliable validation. Maybe not a perfect one as we dreamed for this
sink_crc, but at least more reliable.Good riddance.
Bye bye sink_crc, we are not going to miss you! ;)
Quoted 1 line
Reviewed-by Dhinakaran Pandiyan <[email protected]>
Thanks for granting me this honor!
now let's wait for CI to blow-up...
than when we change psr test cases we come back here, trigger a retest and once CI is happy with push.
Quoted 256 lines
Quoted 145 lines
Cc Dhinakaran Pandiyan <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Rodrigo Vivi <[email protected]>--- drivers/gpu/drm/i915/i915_debugfs.c | 81 ------------------ drivers/gpu/drm/i915/intel_dp.c | 123 ---------------------------- drivers/gpu/drm/i915/intel_drv.h | 2 - 3 files changed, 206 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/i915/i915_debugfs.cindexf6142d78ede4..e8fa106a3655100644drivers/gpu/drm/i915/i915_debugfs.c +0
-47@@ -2761,86 +2761,6 @@ DEFINE_SIMPLE_ATTRIBUTE(i915_edp_psr_debug_fops, i915_edp_psr_debug_get, i915_edp_psr_debug_set, "%llu\n"); -static int i915_sink_crc (struct seq_file *m,void *data) -{ -struct drm_i915_private *dev_priv =node_to_i915 (m->private); -struct drm_device *dev = &dev_priv->drm; -struct intel_connector *connector; -struct drm_connector_list_iter conn_iter; -struct intel_dp *intel_dp =NULL ; -struct drm_modeset_acquire_ctx ctx; -int ret; -u8 crc[6 ]; - -drm_modeset_acquire_init (&ctx,DRM_MODESET_ACQUIRE_INTERRUPTIBLE ); - -drm_connector_list_iter_begin (dev, &conn_iter); - -for_each_intel_connector_iter (connector, &conn_iter) { -struct drm_crtc *crtc; -struct drm_connector_state *state; -struct intel_crtc_state *crtc_state; - -if (connector->base.connector_type != DRM_MODE_CONNECTOR_eDP) -continue ; - -retry: - ret =drm_modeset_lock (&dev->mode_config.connection_mutex, &ctx); -if (ret) - goto err; - - state = connector->base.state; -if (!state->best_encoder) -continue ; - - crtc = state->crtc; - ret =drm_modeset_lock (&crtc->mutex, &ctx); -if (ret) - goto err; - - crtc_state =to_intel_crtc_state (crtc->state); -if (!crtc_state->base.active) -continue ; - -/* -* We need to wait for all crtc updates to complete, to make -* sure any pending modesets and plane updates are completed. -*/ -if (crtc_state->base.commit) { - ret =
wait_for_completion_interruptible(&crtc_state->base.commit->hw_done); -drivers/gpu/drm/i915/i915_debugfs.c +0
-33-if (ret) - goto err; - } - - intel_dp =enc_to_intel_dp (state->best_encoder); - - ret =intel_dp_sink_crc (intel_dp, crtc_state, crc); -if (ret) - goto err; - -seq_printf (m,"%02x%02x%02x%02x%02x%02x\n" , - crc[0 ], crc[1 ], crc[2 ], - crc[3 ], crc[4 ], crc[5 ]); - goto out; - -err: -if (ret == -EDEADLK ) { - ret =drm_modeset_backoff (&ctx); -if (!ret) - goto retry; - } - goto out; - } - ret = -ENODEV ; -out: -drm_connector_list_iter_end (&conn_iter); -drm_modeset_drop_locks (&ctx); -drm_modeset_acquire_fini (&ctx); - -return ret; -} -static int i915_energy_uJ (struct seq_file *m,void *data) {struct drm_i915_private *dev_priv =node_to_i915 (m->private);@@ -4784,7 +4704,6 @@ static const struct drm_info_list i915_debugfs_list[] = { {"i915_ppgtt_info", i915_ppgtt_info, 0}, {"i915_llc", i915_llc, 0}, {"i915_edp_psr_status", i915_edp_psr_status, 0}, - {"i915_sink_crc_eDP1", i915_sink_crc, 0}, {"i915_energy_uJ", i915_energy_uJ, 0}, {"i915_runtime_pm_status", i915_runtime_pm_status, 0}, {"i915_power_domain_info", i915_power_domain_info, 0},(quoted diff) +0
-0
b/drivers/gpu/drm/i915/intel_dp.cindex5be07e1d816d..efdd4b408d51100644drivers/gpu/drm/i915/intel_dp.c +0
-27@@ -3905,129 +3905,6 @@ intel_dp_configure_mst(struct intel_dp *intel_dp) intel_dp->is_mst); } -static int intel_dp_sink_crc_stop (struct intel_dp *intel_dp, -struct intel_crtc_state *crtc_state,bool disable_wa) -{ -struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp); -struct drm_i915_private *dev_priv =to_i915 (dig_port->base.base.dev); -struct intel_crtc *intel_crtc =to_intel_crtc (crtc_state->base.crtc); -u8 buf; -int ret =0 ; -int count =0 ; -int attempts =10 ; - -if (drm_dp_dpcd_readb (&intel_dp->aux,DP_TEST_SINK , &buf) <0 ) { -DRM_DEBUG_KMS ("Sink CRC couldn't be stopped properly\n" ); - ret = -EIO ; - goto out; - } - -if (drm_dp_dpcd_writeb (&intel_dp->aux,DP_TEST_SINK , - buf & ~DP_TEST_SINK_START ) <0 ) { -DRM_DEBUG_KMS ("Sink CRC couldn't be stopped properly\n" ); - ret = -EIO ; - goto out; - } - - do { - intel_wait_for_vblank(dev_priv, intel_crtc->pipe); -drivers/gpu/drm/i915/intel_dp.c intel_dp_configure_mst(struct intel_dp *intel_dp) · line 3944
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp.c +0
-10-if (drm_dp_dpcd_readb (&intel_dp->aux, -DP_TEST_SINK_MISC , &buf) <0 ) { - ret = -EIO ; - goto out; - } - count = buf &DP_TEST_COUNT_MASK ; - }while (--attempts && count); - -if (attempts ==0 ) { - DRM_DEBUG_KMS("TIMEOUT: Sink CRC counter is not zeroed aftercalculation
Quoted 100 lines
drivers/gpu/drm/i915/intel_dp.c +0
-84is stopped\n"); - ret = -ETIMEDOUT; - } - - out: -if (disable_wa) -hsw_enable_ips (crtc_state); -return ret; -} - -static int intel_dp_sink_crc_start (struct intel_dp *intel_dp, -struct intel_crtc_state *crtc_state) -{ -struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp); -struct drm_i915_private *dev_priv =to_i915 (dig_port->base.base.dev); -struct intel_crtc *intel_crtc =to_intel_crtc (crtc_state->base.crtc); -u8 buf; -int ret; - -if (drm_dp_dpcd_readb (&intel_dp->aux,DP_TEST_SINK_MISC , &buf) <0 ) -return -EIO ; - -if (!(buf &DP_TEST_CRC_SUPPORTED )) -return -ENOTTY ; - -if (drm_dp_dpcd_readb (&intel_dp->aux,DP_TEST_SINK , &buf) <0 ) -return -EIO ; - -if (buf &DP_TEST_SINK_START ) { - ret =intel_dp_sink_crc_stop (intel_dp, crtc_state, false); -if (ret) -return ret; - } - -hsw_disable_ips (crtc_state); - -if (drm_dp_dpcd_writeb (&intel_dp->aux,DP_TEST_SINK , - buf |DP_TEST_SINK_START ) <0 ) { -hsw_enable_ips (crtc_state); -return -EIO ; - } - -intel_wait_for_vblank (dev_priv, intel_crtc->pipe); -return 0 ; -} - -int intel_dp_sink_crc (struct intel_dp *intel_dp,struct intel_crtc_state *crtc_state, u8 *crc) -{ -struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp); -struct drm_i915_private *dev_priv =to_i915 (dig_port->base.base.dev); -struct intel_crtc *intel_crtc =to_intel_crtc (crtc_state->base.crtc); -u8 buf; -int count, ret; -int attempts =6 ; - - ret =intel_dp_sink_crc_start (intel_dp, crtc_state); -if (ret) -return ret; - -do { -intel_wait_for_vblank (dev_priv, intel_crtc->pipe); - -if (drm_dp_dpcd_readb (&intel_dp->aux, -DP_TEST_SINK_MISC , &buf) <0 ) { - ret = -EIO ; - goto stop; - } - count = buf &DP_TEST_COUNT_MASK ; - - }while (--attempts && count ==0 ); - -if (attempts ==0 ) { -DRM_ERROR ("Panel is unable to calculate any CRC after 6 vblanks\n" ); - ret = -ETIMEDOUT ; - goto stop; - } - -if (drm_dp_dpcd_read (&intel_dp->aux,DP_TEST_CRC_R_CR , crc,6 ) <0 ) { - ret = -EIO ; - goto stop; - } - -stop: -intel_dp_sink_crc_stop (intel_dp, crtc_state, true); -return ret; -} -static bool intel_dp_get_sink_irq (struct intel_dp *intel_dp,u8 *sink_irq_vector) {(quoted diff) +0
-0
b/drivers/gpu/drm/i915/intel_drv.hindexe09b42d91d1e..8e6ee2fe66e4100644drivers/gpu/drm/i915/intel_drv.h +0
-2@@ -1665,8 +1665,6 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode); void intel_dp_encoder_reset(struct drm_encoder *encoder);void intel_dp_encoder_suspend (struct intel_encoder *intel_encoder);void intel_dp_encoder_destroy (struct drm_encoder *encoder); -int intel_dp_sink_crc (struct intel_dp *intel_dp, -struct intel_crtc_state *crtc_state,u8 *crc); bool intel_dp_compute_config(struct intel_encoder *encoder,
Quoted 8 lines
drivers/gpu/drm/i915/intel_drv.h void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode); · line 1670
Quoted 2 lines
drivers/gpu/drm/i915/intel_drv.h +0
-0struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state);_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 50 lines · Rodrigo Vivi
Quoted 45 lines · Dhinakaran Pandiyan
Quoted 35 lines · PDT Rodrigo Vivi
It was originally introduced following the VESA spec in order to validate
PSR.However we found so many issues around
sink_crcthat instead of helping PSR
development it only brought another layer of trouble to the table.So,
sink_crchas been a black whole for us in question of time, effort and
hope.First of the problems is that HW statement is clear: "Do not attempt to use
aux communication with PSR enabled". So the main reason behindsink_crcis
already compromised.For a while we had hope on the aux-mutex could workaround this problem on
SKL+ platforms, but that mutex was not reliable, not tested, and we shouldn't use according to HW engineers.Also, nor source, nor sink designed and implemented the
sink_crcto be used
like we are trying to use here.Well, the sink side of things is also apparently not prepared for this
case. Each panel that we tried seemed to have a different behavior with same
code and same source.Quoted 8 lines
So, for all the time we lost on trying to ducktape all these different
issues I believe it is now time to move PSR to a more reliable validation.
Maybe not a perfect one as we dreamed for thissink_crc, but at least more
reliable.Quoted 1 line
Good riddance.
Bye bye
sink_crc, we are not going to miss you! ;)Quoted 1 line
Quoted 7 lines
Quoted 1 line
Reviewed-by Dhinakaran Pandiyan <[email protected]>Thanks for granting me this honor!
now let's wait for CI to blow-up...
than when we change psr test cases we come back here, trigger a retest and
once CI is happy with push.
CI is indeed happy now.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerQuoted 52 lines · Dhinakaran Pandiyan
Quoted 51 lines · Rodrigo Vivi
Quoted 45 lines · Dhinakaran Pandiyan
Quoted 35 lines · PDT Rodrigo Vivi
It was originally introduced following the VESA spec in order to validate
PSR.However we found so many issues around
sink_crcthat instead of helping PSR
development it only brought another layer of trouble to the table.So,
sink_crchas been a black whole for us in question of time, effort and
hope.First of the problems is that HW statement is clear: "Do not attempt to use
aux communication with PSR enabled". So the main reason behindsink_crcis
already compromised.For a while we had hope on the aux-mutex could workaround this problem on
SKL+ platforms, but that mutex was not reliable, not tested, and we shouldn't use according to HW engineers.Also, nor source, nor sink designed and implemented the
sink_crcto be used
like we are trying to use here.Well, the sink side of things is also apparently not prepared for this
case. Each panel that we tried seemed to have a different behavior with same
code and same source.Quoted 8 lines
So, for all the time we lost on trying to ducktape all these different
issues I believe it is now time to move PSR to a more reliable validation.
Maybe not a perfect one as we dreamed for thissink_crc, but at least more
reliable.Quoted 1 line
Good riddance.
Bye bye
sink_crc, we are not going to miss you! ;)Quoted 2 lines
Reviewed-by Dhinakaran Pandiyan <[email protected]>
Quoted 8 lines
Quoted 6 lines
Thanks for granting me this honor!
now let's wait for CI to blow-up...
than when we change psr test cases we come back here, trigger a retest and
once CI is happy with push.CI is indeed happy now.
\o/
pushed. Thanks for granting me this honor!
Quoted 1 line
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for drm/i915: Kill sink_crc for good
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: drm/i915: Kill sink_crc for good
URL : https://patchwork.freedesktop.org/series/46039/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip d2a9904c7bc2 drm/i915: Kill sink_crc for good -:6: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line) #6: It was originally introduced following the VESA spec in order to validate PSR.
total: 0 errors, 1 warnings, 0 checks, 230 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915: Kill sink_crc for good
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: drm/i915: Kill sink_crc for good
URL : https://patchwork.freedesktop.org/series/46039/
State : failure
== Summary ==
= CI Bug Log - changes from CI_DRM_4438 -> Patchwork_9558 =
== Summary - FAILURE ==
Serious unknown changes coming with Patchwork_9558 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_9558, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/46039/revisions/1/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_9558:
=== IGT changes ===
==== Possible regressions ====
igt@kms_frontbuffer_tracking@basic:
fi-skl-6700hq: PASS -> FAIL
fi-kbl-7560u: PASS -> FAIL
fi-skl-6600u: PASS -> FAIL
fi-kbl-r: PASS -> FAIL
fi-cfl-s3: PASS -> FAIL
fi-whl-u: PASS -> FAIL
==== Warnings ====
igt@kms_frontbuffer_tracking@basic:
fi-hsw-peppy: DMESG-FAIL (fdo#102614, fdo#106103) -> FAIL
igt@kms_sink_crc_basic:
fi-whl-u: PASS -> SKIP
fi-skl-6700hq: PASS -> SKIP
fi-hsw-peppy: PASS -> SKIP fdo#102614 https://bugs.freedesktop.org/show_bug.cgi?id=102614
fdo#106103 https://bugs.freedesktop.org/show_bug.cgi?id=106103
== Participating hosts (47 -> 42) ==
Missing (5): fi-ctg-p8600 fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-hsw-4200u
== Build changes ==
* Linux: CI_DRM_4438 -> Patchwork_9558
CI_DRM_4438: b689733af687b4b8072fb62a6bfe267c4e888f5f @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4539: 8b3cc74c6911e9b2835fe6e160f84bae463a70ef @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9558: d2a9904c7bc2864730d77f3d3f282d96359f7f70 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
d2a9904c7bc2 drm/i915: Kill sink_crc for good
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9558/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: Kill sink_crc for good
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: drm/i915: Kill sink_crc for good
URL : https://patchwork.freedesktop.org/series/46039/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4504 -> Patchwork_9708 =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/46039/revisions/1/mbox/
== Known issues ==
Here are the changes found in Patchwork_9708 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@drv_module_reload@basic-reload:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106725, fdo#106248)
igt@kms_flip@basic-flip-vs-modeset:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106097, fdo#106000)
==== Possible fixes ====
igt@drv_selftest@live_workarounds:
fi-kbl-7560u: DMESG-FAIL -> PASS
igt@prime_vgem@basic-fence-flip:
fi-ilk-650: FAIL (fdo#104008) -> PASS fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
fdo#106000 https://bugs.freedesktop.org/show_bug.cgi?id=106000
fdo#106097 https://bugs.freedesktop.org/show_bug.cgi?id=106097
fdo#106248 https://bugs.freedesktop.org/show_bug.cgi?id=106248
fdo#106725 https://bugs.freedesktop.org/show_bug.cgi?id=106725
== Participating hosts (46 -> 41) ==
Missing (5): fi-ctg-p8600 fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-hsw-4200u
== Build changes ==
* Linux: CI_DRM_4504 -> Patchwork_9708
CI_DRM_4504: 0ba31c45beee4f7cfc17c61205294c322a9891bf @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4566: 7270e39a0e6238804827ea7f8db433ad743ed745 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9708: 50c9464e8c451c126045e465354052287cecdbe1 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
50c9464e8c45 drm/i915: Kill sink_crc for good
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9708/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for drm/i915: Kill sink_crc for good
In reply to Rodrigo Vivi== Series Details ==
== Series Details ==
Series: drm/i915: Kill sink_crc for good
URL : https://patchwork.freedesktop.org/series/46039/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4504_full -> Patchwork_9708_full =
== Summary - WARNING ==
Minor unknown changes coming with Patchwork_9708_full need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_9708_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_9708_full:
=== IGT changes ===
==== Warnings ====
igt@gem_exec_schedule@deep-bsd2:
shard-kbl: PASS -> SKIP +1
igt@gem_mocs_settings@mocs-rc6-blt:
shard-kbl: SKIP -> PASS +1== Known issues ==
Here are the changes found in Patchwork_9708_full that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@gem_wait@write-wait-bsd2:
shard-snb: SKIP -> INCOMPLETE (fdo#105411)
igt@kms_color@pipe-a-ctm-max:
shard-kbl: PASS -> DMESG-WARN (fdo#106247)
igt@kms_flip@2x-plain-flip-fb-recreate-interruptible:
shard-glk: PASS -> FAIL (fdo#100368) +2
igt@kms_flip@modeset-vs-vblank-race-interruptible:
shard-glk: PASS -> FAIL (fdo#103060)
==== Possible fixes ====
igt@kms_cursor_legacy@cursor-vs-flip-toggle:
shard-kbl: FAIL (fdo#103355) -> PASS
igt@kms_flip@2x-plain-flip-fb-recreate:
shard-glk: FAIL (fdo#100368) -> PASS fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#103355 https://bugs.freedesktop.org/show_bug.cgi?id=103355
fdo#105411 https://bugs.freedesktop.org/show_bug.cgi?id=105411
fdo#106247 https://bugs.freedesktop.org/show_bug.cgi?id=106247
== Participating hosts (5 -> 5) ==
No changes in participating hosts
== Build changes ==
* Linux: CI_DRM_4504 -> Patchwork_9708
CI_DRM_4504: 0ba31c45beee4f7cfc17c61205294c322a9891bf @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4566: 7270e39a0e6238804827ea7f8db433ad743ed745 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9708: 50c9464e8c451c126045e465354052287cecdbe1 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9708/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx