Skip to contentSkip to conversation

drm/i915/psr: Enable PSR1 by default on gen9+ platforms

PATCH In review Dhinakaran Pandiyan 4 participants 6 messages Jul 25, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915/psr: Enable PSR1 by default on gen9+ platforms

We have merged several fixes, re-written some tests and improved debug capability in the past several months, so this is a good time to give PSR1 another try. PSR1 has not been tested on HSW and BDW recently, so let's enable only on gen9+ now.

Cc Rodigo Vivi <[email protected]>
Cc José Roberto de Souza <[email protected]>
---
 drivers/gpu/drm/i915/intel_psr.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/intel_psr.c +10 -10
index 4bd5768731ee..942db85da6a1 100644
@@ -471,10 +471,8 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
 	if (!CAN_PSR(dev_priv))
 		return;
 
-	if (!i915_modparams.enable_psr) {
-		DRM_DEBUG_KMS("PSR disable by flag\n");
+	if (!i915_modparams.enable_psr)
 		return;
-	}
 
 	/*
 	 * HSW spec explicitly says PSR is tied to port A.
@@ -516,7 +514,11 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
 	}
 
 	crtc_state->has_psr = true;
-	crtc_state->has_psr2 = intel_psr2_config_valid(intel_dp, crtc_state);
+
+	/* Enable only PSR 1 by default for now */
+	crtc_state->has_psr2 = i915_modparams.enable_psr == 1 &&
+			       intel_psr2_config_valid(intel_dp, crtc_state);
+
 	DRM_DEBUG_KMS("Enabling PSR%s\n", crtc_state->has_psr2 ? "2" : "");
 }
 
@@ -956,12 +958,10 @@ void intel_psr_init(struct drm_i915_private *dev_priv)
 	if (!dev_priv->psr.sink_support)
 		return;
 
-	if (i915_modparams.enable_psr == -1) {
-		i915_modparams.enable_psr = dev_priv->vbt.psr.enable;
-
-		/* Per platform default: all disabled. */
-		i915_modparams.enable_psr = 0;
-	}
+	/* Enable PSR 1 default only on gen9+ */
+	if (i915_modparams.enable_psr == -1)
+		if (INTEL_GEN(dev_priv) < 9 || !dev_priv->vbt.psr.enable)
+			i915_modparams.enable_psr = 0;
 
 	/* Set link_standby x link_off defaults */
 	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
Signature · 6 lines
2.17.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

✓ Fi.CI.BAT: success for drm/i915/psr: Enable PSR1 by default on gen9+ platforms

== Series Details ==

== Series Details ==

Series: drm/i915/psr: Enable PSR1 by default on gen9+ platforms
URL : https://patchwork.freedesktop.org/series/47188/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4538 -> Patchwork_9761 =

== Summary - SUCCESS ==

No regressions found.

External URL: https://patchwork.freedesktop.org/api/1.0/series/47188/revisions/1/mbox/

== Possible new issues ==

Here are the unknown changes that may have been introduced in Patchwork_9761:

=== IGT changes ===

    ==== Possible regressions ====

    igt@drv_selftest@live_hangcheck:
      {fi-cfl-8109u}:     PASS -> DMESG-FAIL

    igt@drv_selftest@live_hugepages:
      {fi-cfl-8109u}:     PASS -> DMESG-WARN +9

== Known issues ==

Here are the changes found in Patchwork_9761 that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@drv_selftest@live_workarounds:
      {fi-cfl-8109u}:     PASS -> DMESG-FAIL (fdo#107292)

    igt@gem_ctx_create@basic-files:
      fi-glk-j4005:       PASS -> DMESG-WARN (fdo#105719) +1

    igt@gem_exec_suspend@basic-s4-devices:
      fi-kbl-7500u:       PASS -> DMESG-WARN (fdo#105128, fdo#107139)

    igt@kms_chamelium@hdmi-hpd-fast:
      fi-kbl-7500u:       SKIP -> FAIL (fdo#102672, fdo#103841)

    igt@kms_frontbuffer_tracking@basic:
      fi-hsw-peppy:       PASS -> DMESG-FAIL (fdo#106103, fdo#102614)

    igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
      fi-snb-2520m:       NOTRUN -> INCOMPLETE (fdo#103713)

    
    ==== Possible fixes ====

    igt@debugfs_test@read_all_entries:
      fi-snb-2520m:       INCOMPLETE (fdo#103713) -> PASS

    igt@drv_module_reload@basic-no-display:
      fi-glk-j4005:       DMESG-WARN (fdo#106725) -> PASS

    igt@drv_selftest@live_workarounds:
      fi-kbl-x1275:       DMESG-FAIL (fdo#107292) -> PASS

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

fdo#102614 https://bugs.freedesktop.org/show_bug.cgi?id=102614
fdo#102672 https://bugs.freedesktop.org/show_bug.cgi?id=102672
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#103841 https://bugs.freedesktop.org/show_bug.cgi?id=103841
fdo#105128 https://bugs.freedesktop.org/show_bug.cgi?id=105128
fdo#105719 https://bugs.freedesktop.org/show_bug.cgi?id=105719
fdo#106103 https://bugs.freedesktop.org/show_bug.cgi?id=106103
fdo#106725 https://bugs.freedesktop.org/show_bug.cgi?id=106725
fdo#107139 https://bugs.freedesktop.org/show_bug.cgi?id=107139
fdo#107292 https://bugs.freedesktop.org/show_bug.cgi?id=107292

== Participating hosts (51 -> 44) ==

Missing (7): fi-ilk-m540 fi-bxt-dsi fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper

== Build changes ==

* Linux: CI_DRM_4538 -> Patchwork_9761

CI_DRM_4538: 0233efd326b819549668b71be377d405266120ba @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4573: 2884f91dd6d7682ea738ef6f0943cc591643dda2 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9761: 0b8dc507cfca99610648a2eaf67da0da0bfdf4be @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

0b8dc507cfca drm/i915/psr: Enable PSR1 by default on gen9+ platforms

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9761/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#2 lore raw

✓ Fi.CI.IGT: success for drm/i915/psr: Enable PSR1 by default on gen9+ platforms

In reply to Dhinakaran Pandiyan
== Series Details ==

== Series Details ==

Series: drm/i915/psr: Enable PSR1 by default on gen9+ platforms
URL : https://patchwork.freedesktop.org/series/47188/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4538_full -> Patchwork_9761_full =

== Summary - WARNING ==

Minor unknown changes coming with Patchwork_9761_full need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_9761_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

== Possible new issues ==

Here are the unknown changes that may have been introduced in Patchwork_9761_full:

=== IGT changes ===

    ==== Warnings ====

    igt@gem_mocs_settings@mocs-rc6-vebox:
      shard-kbl:          PASS -> SKIP

    igt@pm_rc6_residency@rc6-accuracy:
      shard-kbl:          SKIP -> PASS

== Known issues ==

Here are the changes found in Patchwork_9761_full that come from known issues:

=== IGT changes ===

    ==== Issues hit ====

    igt@gem_exec_flush@basic-wb-rw-default:
      shard-snb:          PASS -> INCOMPLETE (fdo#105411)

    igt@gem_ppgtt@blt-vs-render-ctx0:
      shard-kbl:          PASS -> INCOMPLETE (fdo#106023, fdo#103665)

    
    ==== Possible fixes ====

    igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
      shard-glk:          FAIL (fdo#105189) -> PASS

    igt@kms_flip@2x-plain-flip-fb-recreate:
      shard-hsw:          FAIL (fdo#100368) -> PASS

    igt@kms_flip@plain-flip-ts-check:
      shard-glk:          FAIL (fdo#100368) -> PASS

    igt@kms_setmode@basic:
      shard-apl:          FAIL (fdo#99912) -> PASS
      shard-kbl:          FAIL (fdo#99912) -> PASS

fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
fdo#105189 https://bugs.freedesktop.org/show_bug.cgi?id=105189
fdo#105411 https://bugs.freedesktop.org/show_bug.cgi?id=105411
fdo#106023 https://bugs.freedesktop.org/show_bug.cgi?id=106023
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912

== Participating hosts (5 -> 5) ==

No changes in participating hosts

== Build changes ==

* Linux: CI_DRM_4538 -> Patchwork_9761

CI_DRM_4538: 0233efd326b819549668b71be377d405266120ba @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4573: 2884f91dd6d7682ea738ef6f0943cc591643dda2 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9761: 0b8dc507cfca99610648a2eaf67da0da0bfdf4be @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9761/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#3 lore raw
In reply to Dhinakaran Pandiyan
Quoted 17 lines · Dhinakaran Pandiyan

We have merged several fixes, re-written some tests and improved debug capability in the past several months, so this is a good time to give PSR1 another try. PSR1 has not been tested on HSW and BDW recently, so let's enable only on gen9+ now.

Cc Rodigo Vivi <[email protected]>
Cc José Roberto de Souza <[email protected]>
---
 drivers/gpu/drm/i915/intel_psr.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/intel_psr.c +0 -0
index 4bd5768731ee..942db85da6a1 100644

drivers/gpu/drm/i915/intel_psr.c void intel_psr_compute_config(struct intel_dp *intel_dp, · line 475

Quoted 5 lines
drivers/gpu/drm/i915/intel_psr.c +0 -2
@@ -471,10 +471,8 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
 	if (!CAN_PSR(dev_priv))
 		return;
 
-	if (!i915_modparams.enable_psr) {
-		DRM_DEBUG_KMS("PSR disable by flag\n");

Why are you removing the message?
I think it is still useful... and enable_psr == -1 doesn't trigger that.

Quoted 7 lines
drivers/gpu/drm/i915/intel_psr.c +1 -1
+	if (!i915_modparams.enable_psr)
 		return;
-	}
 
 	/*
 	 * HSW spec explicitly says PSR is tied to port A.

drivers/gpu/drm/i915/intel_psr.c void intel_psr_compute_config(struct intel_dp *intel_dp, · line 521

Quoted 9 lines
drivers/gpu/drm/i915/intel_psr.c +5 -1
@@ -516,7 +514,11 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
 	}
 
 	crtc_state->has_psr = true;
-	crtc_state->has_psr2 = intel_psr2_config_valid(intel_dp, crtc_state);
+
+	/* Enable only PSR 1 by default for now */
+	crtc_state->has_psr2 = i915_modparams.enable_psr == 1 &&
+			       intel_psr2_config_valid(intel_dp, crtc_state);
+

this might get confusing...
-1 - enable psr1
0 - disable
1 - enable psr2

and far from the variable... Well... I want to kill the parameter anyways so no hard feelings on having this here, but what about some debug messages at least?

/* Enable only PSR1 by default for now */

if (i915_modparams.enable_psr == -1) {
	DRM_DEBUG_KMS("Avoiding PSR2 by platform default")
	crtc_state->has_psr2 = 0;
} else {
	crtc_state->has_psr2 = intel_psr2_config_valid(intel_dp, crtc_state);
}
Quoted 7 lines
drivers/gpu/drm/i915/intel_psr.c +0 -0
 	DRM_DEBUG_KMS("Enabling PSR%s\n", crtc_state->has_psr2 ? "2" : "");
 }
 
@@ -956,12 +958,10 @@ void intel_psr_init(struct drm_i915_private *dev_priv)
 	if (!dev_priv->psr.sink_support)
 		return;
 

drivers/gpu/drm/i915/intel_psr.c void intel_psr_init(struct drm_i915_private *dev_priv) · line 964

Quoted 10 lines
drivers/gpu/drm/i915/intel_psr.c +4 -6
-	if (i915_modparams.enable_psr == -1) {
-		i915_modparams.enable_psr = dev_priv->vbt.psr.enable;
-
-		/* Per platform default: all disabled. */
-		i915_modparams.enable_psr = 0;
-	}
+	/* Enable PSR 1 default only on gen9+ */
+	if (i915_modparams.enable_psr == -1)
+		if (INTEL_GEN(dev_priv) < 9 || !dev_priv->vbt.psr.enable)
+			i915_modparams.enable_psr = 0;

we talked about this in person, but just for the record:
we need to check cnl and icl on CI for psr cases before make this > 9.

Quoted 6 lines
drivers/gpu/drm/i915/intel_psr.c +0 -0
 	/* Set link_standby x link_off defaults */
 	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
Signature · 1 line
2.17.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#4 lore raw
Quoted 17 lines · Rodrigo Vivi
Quoted 16 lines · Dhinakaran Pandiyan

We have merged several fixes, re-written some tests and improved debug
capability in the past several months, so this is a good time to give PSR1
another try. PSR1 has not been tested on HSW and BDW recently, so let's
enable only on gen9+ now.

Cc Rodigo Vivi <[email protected]>
Cc José Roberto de Souza <[email protected]>

---
 drivers/gpu/drm/i915/intel_psr.c | 20 ++++++++++----------

 1 file changed, 10 insertions(+), 10 deletions(-)
Quoted 16 lines

drivers/gpu/drm/i915/intel_psr.c void intel_psr_compute_config(struct intel_dp *intel_dp, · line 475

Quoted 12 lines
drivers/gpu/drm/i915/intel_psr.c +0 -0
index 4bd5768731ee..942db85da6a1 100644
@@ -471,10 +471,8 @@ void intel_psr_compute_config(struct intel_dp
 *intel_dp,
  	if (!CAN_PSR(dev_priv))
  		return;

drivers/gpu/drm/i915/intel_psr.c +0 -2
-	if (!i915_modparams.enable_psr) {
-		DRM_DEBUG_KMS("PSR disable by flag\n");

Why are you removing the message?
I think it is still useful... and enable_psr == -1 doesn't trigger that.

The text was a bit vague to start with, and is confusing when combined with this patch. Agreed, it is useful to have a debug message, I'll replace it.

Quoted 31 lines
Quoted 18 lines
drivers/gpu/drm/i915/intel_psr.c +1 -0
+	if (!i915_modparams.enable_psr)

  return;

drivers/gpu/drm/i915/intel_psr.c +0 -1
-	}


  /*
   * HSW spec explicitly says PSR is tied to port A.

drivers/gpu/drm/i915/intel_psr.c +0 -0
@@ -516,7 +514,11 @@ void intel_psr_compute_config(struct intel_dp
 *intel_dp,
  	}


  crtc_state->has_psr = true;

drivers/gpu/drm/i915/intel_psr.c +0 -1
-	crtc_state->has_psr2 = intel_psr2_config_valid(intel_dp,

crtc_state);

drivers/gpu/drm/i915/intel_psr.c +4 -0
+
+	/* Enable only PSR 1 by default for now */
+	crtc_state->has_psr2 = i915_modparams.enable_psr == 1 &&
+			       intel_psr2_config_valid(intel_dp,
Quoted 2 lines

crtc_state);
+

this might get confusing...
-1 - enable psr1
0 - disable
1 - enable psr2

and far from the variable... Well... I want to kill the parameter anyways
so no hard feelings on having this here, but what about some debug messages
at least?

Quoted 9 lines

/* Enable only PSR1 by default for now */

if (i915_modparams.enable_psr == -1) {
	DRM_DEBUG_KMS("Avoiding PSR2 by platform default")
	crtc_state->has_psr2 = 0;
} else {
	crtc_state->has_psr2 = intel_psr2_config_valid(intel_dp,

crtc_state);
}

The reason I added a check for i915.enable_psr==1 was to enable PSR2 only when the user passes the exact value. Otherwise, we should fall back to default.

Quoted 20 lines
Quoted 20 lines

  DRM_DEBUG_KMS("Enabling PSR%s\n", crtc_state->has_psr2 ? "2" : "");
 }

drivers/gpu/drm/i915/intel_psr.c +0 -0
@@ -956,12 +958,10 @@ void intel_psr_init(struct drm_i915_private
 *dev_priv)
  	if (!dev_priv->psr.sink_support)
  		return;

drivers/gpu/drm/i915/intel_psr.c +0 -2
-	if (i915_modparams.enable_psr == -1) {
-		i915_modparams.enable_psr = dev_priv-
Quoted 1 line

vbt.psr.enable;

drivers/gpu/drm/i915/intel_psr.c +3 -4
-
-		/* Per platform default: all disabled. */
-		i915_modparams.enable_psr = 0;
-	}
+	/* Enable PSR 1 default only on gen9+ */
+	if (i915_modparams.enable_psr == -1)
+		if (INTEL_GEN(dev_priv) < 9 || !dev_priv-
Quoted 5 lines

drivers/gpu/drm/i915/intel_psr.c void intel_psr_init(struct drm_i915_private *dev_priv) · line 964

Quoted 2 lines
Quoted 1 line

vbt.psr.enable)

drivers/gpu/drm/i915/intel_psr.c +1 -0
+			i915_modparams.enable_psr = 0;

we talked about this in person, but just for the record:
we need to check cnl and icl on CI for psr cases before make this > 9.

The failures on ICL are due to an unrelated debug warning. The CNL ones are interesting, most likely due to us enabling PSR2 by setting the module parameter=1 from the IGTs. But, it still should not be failing, I'll check.

Quoted 5 lines
Quoted 5 lines

  /* Set link_standby x link_off defaults */ if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#5 lore raw
Quoted 79 lines · Dhinakaran Pandiyan
Quoted 17 lines · Rodrigo Vivi
Quoted 16 lines · Dhinakaran Pandiyan

We have merged several fixes, re-written some tests and improved debug
capability in the past several months, so this is a good time to give PSR1
another try. PSR1 has not been tested on HSW and BDW recently, so let's
enable only on gen9+ now.

Cc Rodigo Vivi <[email protected]>
Cc José Roberto de Souza <[email protected]>

---
 drivers/gpu/drm/i915/intel_psr.c | 20 ++++++++++----------

 1 file changed, 10 insertions(+), 10 deletions(-)
Quoted 16 lines

drivers/gpu/drm/i915/intel_psr.c void intel_psr_compute_config(struct intel_dp *intel_dp, · line 475

Quoted 12 lines
drivers/gpu/drm/i915/intel_psr.c +0 -0
index 4bd5768731ee..942db85da6a1 100644
@@ -471,10 +471,8 @@ void intel_psr_compute_config(struct intel_dp
 *intel_dp,
  	if (!CAN_PSR(dev_priv))
  		return;

drivers/gpu/drm/i915/intel_psr.c +0 -2
-	if (!i915_modparams.enable_psr) {
-		DRM_DEBUG_KMS("PSR disable by flag\n");

Why are you removing the message?
I think it is still useful... and enable_psr == -1 doesn't trigger that.

The text was a bit vague to start with, and is confusing when combined with this patch. Agreed, it is useful to have a debug message, I'll replace it.

Quoted 31 lines
Quoted 18 lines
drivers/gpu/drm/i915/intel_psr.c +1 -0
+	if (!i915_modparams.enable_psr)

  return;

drivers/gpu/drm/i915/intel_psr.c +0 -1
-	}


  /*
   * HSW spec explicitly says PSR is tied to port A.

drivers/gpu/drm/i915/intel_psr.c +0 -0
@@ -516,7 +514,11 @@ void intel_psr_compute_config(struct intel_dp
 *intel_dp,
  	}


  crtc_state->has_psr = true;

drivers/gpu/drm/i915/intel_psr.c +0 -1
-	crtc_state->has_psr2 = intel_psr2_config_valid(intel_dp,

crtc_state);

drivers/gpu/drm/i915/intel_psr.c +4 -0
+
+	/* Enable only PSR 1 by default for now */
+	crtc_state->has_psr2 = i915_modparams.enable_psr == 1 &&
+			       intel_psr2_config_valid(intel_dp,
Quoted 2 lines

crtc_state);
+

this might get confusing...
-1 - enable psr1
0 - disable
1 - enable psr2

and far from the variable... Well... I want to kill the parameter anyways
so no hard feelings on having this here, but what about some debug messages
at least?

Quoted 9 lines

/* Enable only PSR1 by default for now */

if (i915_modparams.enable_psr == -1) {
	DRM_DEBUG_KMS("Avoiding PSR2 by platform default")
	crtc_state->has_psr2 = 0;
} else {
	crtc_state->has_psr2 = intel_psr2_config_valid(intel_dp,

crtc_state);
}

Quoted 3 lines

The reason I added a check for i915.enable_psr==1 was to enable PSR2 only when the user passes the exact value. Otherwise, we should fall back to default.

well, it could be == 1 check inverting my block here... but my main point is to have some kind of debug message ;)

Quoted 27 lines
Quoted 21 lines
Quoted 21 lines

  DRM_DEBUG_KMS("Enabling PSR%s\n", crtc_state->has_psr2 ? "2" : "");
 }

drivers/gpu/drm/i915/intel_psr.c +0 -0
@@ -956,12 +958,10 @@ void intel_psr_init(struct drm_i915_private
 *dev_priv)
  	if (!dev_priv->psr.sink_support)
  		return;

drivers/gpu/drm/i915/intel_psr.c +0 -2
-	if (i915_modparams.enable_psr == -1) {
-		i915_modparams.enable_psr = dev_priv-
Quoted 1 line

vbt.psr.enable;

drivers/gpu/drm/i915/intel_psr.c +3 -4
-
-		/* Per platform default: all disabled. */
-		i915_modparams.enable_psr = 0;
-	}
+	/* Enable PSR 1 default only on gen9+ */
+	if (i915_modparams.enable_psr == -1)
+		if (INTEL_GEN(dev_priv) < 9 || !dev_priv-
Quoted 5 lines

drivers/gpu/drm/i915/intel_psr.c void intel_psr_init(struct drm_i915_private *dev_priv) · line 964

Quoted 2 lines
Quoted 1 line

vbt.psr.enable)

drivers/gpu/drm/i915/intel_psr.c +1 -0
+			i915_modparams.enable_psr = 0;

we talked about this in person, but just for the record:
we need to check cnl and icl on CI for psr cases before make this > 9.

Quoted 12 lines

The failures on ICL are due to an unrelated debug warning. The CNL ones are interesting, most likely due to us enabling PSR2 by setting the module parameter=1 from the IGTs. But, it still should not be failing, I'll check.

Quoted 5 lines
Quoted 5 lines

  /* Set link_standby x link_off defaults */ if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx