drm/i915/icl: Add TBT checks for PLL calculations
Subsystems (2)
PATCH 1/2 drm/i915/icl: Add TBT checks for PLL calculations
Add missing TBT check in the Pll calculation.
v2: do not use a auxiliary function to check if status is TBT or not. (Paulo)
--- drivers/gpu/drm/i915/intel_dpll_mgr.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_dpll_mgr.c +5 -1
@@ -428,6 +428,7 @@ ibx_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, struct intel_encoder *encoder) {struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev); +struct intel_shared_dpll *pll;enum intel_dpll_id i;
@@ -2866,6 +2867,9 @@ static struct intel_shared_dpll * icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, struct intel_encoder *encoder) { + struct intel_digital_port *intel_dig_port = +enc_to_dig_port (&encoder->base); +struct intel_shared_dpll *pll;struct intel_dpll_hw_state pll_state = {};enum port port = encoder->port;
@@ -2885,7 +2889,7 @@ icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,case PORT_D :case PORT_E :case PORT_F : -if (0 /* TODO: TBT PLLs */ ) { +if (intel_dig_port->tc_type ==TC_PORT_TBT ) { min =DPLL_ID_ICL_TBTPLL ; max = min; ret = icl_calc_dpll_state(crtc_state, encoder, clock,
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/2 drm/i915/icl: Set TBT IO in Aux transaction
For a TBT sequence, we need to set the IO type to TBT in DDI_AUX_CTL.
--- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_dp.c | 34 +++++++++++++++++++++++++--------- 2 files changed, 26 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -5558,6 +5558,7 @@ enum {#define DP_AUX_CH_CTL_PSR_DATA_AUX_REG_SKL (1 << 14)#define DP_AUX_CH_CTL_FS_DATA_AUX_REG_SKL (1 << 13)#define DP_AUX_CH_CTL_GTC_DATA_AUX_REG_SKL (1 << 12) +#define DP_AUX_CH_CTL_TBT_IO (1 << 11)#define DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL_MASK (0x1f << 5)#define DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL (c) (((c) - 1) << 5)#define DP_AUX_CH_CTL_SYNC_PULSE_SKL (c) ((c) - 1)
drivers/gpu/drm/i915/intel_dp.c +25 -9
@@ -1208,15 +1208,31 @@ static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp, int send_bytes, uint32_t unused) { -return DP_AUX_CH_CTL_SEND_BUSY | -DP_AUX_CH_CTL_DONE | -DP_AUX_CH_CTL_INTERRUPT | -DP_AUX_CH_CTL_TIME_OUT_ERROR | -DP_AUX_CH_CTL_TIME_OUT_MAX | -DP_AUX_CH_CTL_RECEIVE_ERROR | - (send_bytes <<DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT ) | -DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL (32 ) | -DP_AUX_CH_CTL_SYNC_PULSE_SKL (32 ); +struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp); +struct drm_i915_private *dev_priv =to_i915 (intel_dig_port->base.base.dev); + +if (INTEL_GEN (dev_priv) >=11 && intel_dig_port->tc_type ==TC_PORT_TBT ) { +return DP_AUX_CH_CTL_SEND_BUSY | +DP_AUX_CH_CTL_DONE | +DP_AUX_CH_CTL_INTERRUPT | +DP_AUX_CH_CTL_TIME_OUT_ERROR | +DP_AUX_CH_CTL_TIME_OUT_MAX | +DP_AUX_CH_CTL_RECEIVE_ERROR | + (send_bytes <<DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT ) | +DP_AUX_CH_CTL_TBT_IO | +DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL (32 ) | +DP_AUX_CH_CTL_SYNC_PULSE_SKL (32 ); + }else { +return DP_AUX_CH_CTL_SEND_BUSY | +DP_AUX_CH_CTL_DONE | +DP_AUX_CH_CTL_INTERRUPT | +DP_AUX_CH_CTL_TIME_OUT_ERROR | +DP_AUX_CH_CTL_TIME_OUT_MAX | +DP_AUX_CH_CTL_RECEIVE_ERROR | + (send_bytes <<DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT ) | +DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL (32 ) | +DP_AUX_CH_CTL_SYNC_PULSE_SKL (32 ); + } } static int
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915/icl: Set TBT IO in Aux transaction
Em Qua, 2018-07-25 às 14:28 -0700, Anusha Srivatsa escreveu:
Quoted 39 lines
For a TBT sequence, we need to set the IO type to TBT in
DDI_AUX_CTL.Cc Paulo Zanoni <[email protected]>Signed-off-by Anusha Srivatsa <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_dp.c | 34 +++++++++++++++++++++++++---- ----- 2 files changed, 26 insertions(+), 9 deletions(-)drivers/gpu/drm/i915/i915_reg.h +1
-0@@ -5558,6 +5558,7 @@ enum {#define DP_AUX_CH_CTL_PSR_DATA_AUX_REG_SKL (1 << 14)#define DP_AUX_CH_CTL_FS_DATA_AUX_REG_SKL (1 << 13)#define DP_AUX_CH_CTL_GTC_DATA_AUX_REG_SKL (1 << 12) +#define DP_AUX_CH_CTL_TBT_IO (1 << 11)#define DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL_MASK (0x1f << 5)#define DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL (c) (((c) - 1) << 5)#define DP_AUX_CH_CTL_SYNC_PULSE_SKL (c) ((c) - 1)drivers/gpu/drm/i915/intel_dp.c +0
-5@@ -1208,15 +1208,31 @@ static uint32_t skl_get_aux_send_ctl(structintel_dp *intel_dp, int send_bytes, uint32_t unused) { - return DP_AUX_CH_CTL_SEND_BUSY | - DP_AUX_CH_CTL_DONE | - DP_AUX_CH_CTL_INTERRUPT | - DP_AUX_CH_CTL_TIME_OUT_ERROR | - DP_AUX_CH_CTL_TIME_OUT_MAX |
drivers/gpu/drm/i915/intel_dp.c static uint32_t skl_get_aux_send_ctl(struct · line 1217
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp.c +4
-4-DP_AUX_CH_CTL_RECEIVE_ERROR | - (send_bytes <<DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT ) | -DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL (32 ) | -DP_AUX_CH_CTL_SYNC_PULSE_SKL (32 ); +struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp); +struct drm_i915_private *dev_priv =to_i915 (intel_dig_port- >base.base.dev); + + if (INTEL_GEN(dev_priv) >= 11
There's no need for this check, since intel_dig_port->tc_type can't be TC_PORT_TBT on platforms earlier than gen11.
If we were to add a check, I'd suggest to use intel_port_is_tc(), but I don't see the need.
There's a lot of avoidable duplicate code. Please avoid it with something like:
---uint32_t ret;
ret = DP_AUX_CH_CTL_SEND_BUSY |
DP_AUX_CH_CTL_DONE |
etc;if (intel_dig_port->tc_type == TC_PORT_TBT)
ret |= DP_AUX_CH_CTL_TBT_IO;
return ret;
---
Thanks,
Paulo
Quoted 21 lines
drivers/gpu/drm/i915/intel_dp.c +7
-0&& intel_dig_port->tc_type == TC_PORT_TBT) { +return DP_AUX_CH_CTL_SEND_BUSY | +DP_AUX_CH_CTL_DONE | +DP_AUX_CH_CTL_INTERRUPT | +DP_AUX_CH_CTL_TIME_OUT_ERROR | +DP_AUX_CH_CTL_TIME_OUT_MAX | + DP_AUX_CH_CTL_RECEIVE_ERROR | + (send_bytes <<
DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |drivers/gpu/drm/i915/intel_dp.c +11
-0+DP_AUX_CH_CTL_TBT_IO | +DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL (32 ) | +DP_AUX_CH_CTL_SYNC_PULSE_SKL (32 ); + }else { +return DP_AUX_CH_CTL_SEND_BUSY | +DP_AUX_CH_CTL_DONE | +DP_AUX_CH_CTL_INTERRUPT | +DP_AUX_CH_CTL_TIME_OUT_ERROR | +DP_AUX_CH_CTL_TIME_OUT_MAX | + DP_AUX_CH_CTL_RECEIVE_ERROR | + (send_bytes <<
DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
drivers/gpu/drm/i915/intel_dp.c static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp, · line 1238
Quoted 6 lines
drivers/gpu/drm/i915/intel_dp.c +3
-0+DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL (32 ) | +DP_AUX_CH_CTL_SYNC_PULSE_SKL (32 ); + } } static int
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915/icl: Set TBT IO in Aux transaction
Quoted 53 lines
-----Original Message-----
From: Zanoni, Paulo R
Sent: Wednesday, July 25, 2018 4:08 PM
To: Srivatsa, Anusha <[email protected]>; intel- [email protected]
Subject: Re: [PATCH 2/2] drm/i915/icl: Set TBT IO in Aux transactionEm Qua, 2018-07-25 às 14:28 -0700, Anusha Srivatsa escreveu:
Quoted 43 lines
For a TBT sequence, we need to set the IO type to TBT in
DDI_AUX_CTL.Cc Paulo Zanoni <[email protected]>Signed-off-by Anusha Srivatsa <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_dp.c | 34 +++++++++++++++++++++++++---- ----- 2 files changed, 26 insertions(+), 9 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/i915/i915_reg.hindex 5530c47..7bdc214 100644drivers/gpu/drm/i915/i915_reg.h +1
-0@@ -5558,6 +5558,7 @@ enum {#define DP_AUX_CH_CTL_PSR_DATA_AUX_REG_SKL (1 << 14)#define DP_AUX_CH_CTL_FS_DATA_AUX_REG_SKL (1 << 13)#define DP_AUX_CH_CTL_GTC_DATA_AUX_REG_SKL (1 << 12) +#define DP_AUX_CH_CTL_TBT_IO (1 << 11)#define DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL_MASK (0x1f << 5)#define DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL (c) (((c) - 1) << 5)#define DP_AUX_CH_CTL_SYNC_PULSE_SKL (c) ((c) - 1)(quoted diff) +0
-0
b/drivers/gpu/drm/i915/intel_dp.cindex cc33d7c..90a8e2f 100644drivers/gpu/drm/i915/intel_dp.c +2
-9@@ -1208,15 +1208,31 @@ static uint32_t skl_get_aux_send_ctl(structintel_dp *intel_dp, int send_bytes, uint32_t unused) { - return DP_AUX_CH_CTL_SEND_BUSY | - DP_AUX_CH_CTL_DONE | - DP_AUX_CH_CTL_INTERRUPT | - DP_AUX_CH_CTL_TIME_OUT_ERROR | - DP_AUX_CH_CTL_TIME_OUT_MAX | - DP_AUX_CH_CTL_RECEIVE_ERROR | - (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | - DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(32) | - DP_AUX_CH_CTL_SYNC_PULSE_SKL(32); + struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp); + struct drm_i915_private *dev_priv = to_i915(intel_dig_port-
Quoted 6 lines
drivers/gpu/drm/i915/intel_dp.c static uint32_t skl_get_aux_send_ctl(struct · line 1217
Quoted 3 lines
drivers/gpu/drm/i915/intel_dp.c +2
-0>base.base.dev); + + if (INTEL_GEN(dev_priv) >= 11There's no need for this check, since
intel_dig_port->tc_typecan't beTC_PORT_TBTon platforms earlier than gen11.
That is true.
Quoted 7 lines
If we were to add a check, I'd suggest to use
intel_port_is_tc(), but I don't see the need.
There's a lot of avoidable duplicate code. Please avoid it with something like:---
uint32_tret;
Quoted 8 lines
ret =
DP_AUX_CH_CTL_SEND_BUSY|DP_AUX_CH_CTL_DONE | etc;if (
intel_dig_port->tc_type==TC_PORT_TBT)ret |= DP_AUX_CH_CTL_TBT_IO;return ret;
That’s a much better approach.
Thanks for the feedback.
Anusha
Quoted 32 lines
---
Thanks,
PauloQuoted 26 lines
drivers/gpu/drm/i915/intel_dp.c +7
-0&& intel_dig_port->tc_type == TC_PORT_TBT) { +return DP_AUX_CH_CTL_SEND_BUSY | +DP_AUX_CH_CTL_DONE | +DP_AUX_CH_CTL_INTERRUPT | +DP_AUX_CH_CTL_TIME_OUT_ERROR | +DP_AUX_CH_CTL_TIME_OUT_MAX | + DP_AUX_CH_CTL_RECEIVE_ERROR | + (send_bytes <<
DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |drivers/gpu/drm/i915/intel_dp.c +11
-0+DP_AUX_CH_CTL_TBT_IO | +DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL (32 ) | +DP_AUX_CH_CTL_SYNC_PULSE_SKL (32 ); + }else { +return DP_AUX_CH_CTL_SEND_BUSY | +DP_AUX_CH_CTL_DONE | +DP_AUX_CH_CTL_INTERRUPT | +DP_AUX_CH_CTL_TIME_OUT_ERROR | +DP_AUX_CH_CTL_TIME_OUT_MAX | + DP_AUX_CH_CTL_RECEIVE_ERROR | + (send_bytes <<
DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |drivers/gpu/drm/i915/intel_dp.c +3
-0+DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL (32 ) | +DP_AUX_CH_CTL_SYNC_PULSE_SKL (32 ); + } }
Quoted 1 line
Quoted 1 line
static int
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Em Qua, 2018-07-25 às 14:28 -0700, Anusha Srivatsa escreveu:
Quoted 19 lines
Add missing TBT check in the Pll calculation.
v2: do not use a auxiliary function to check if status is TBT or not. (Paulo)
Cc Paulo Zanoni <[email protected]>Cc Lucas De Marchi <[email protected]>Signed-off-by Anusha Srivatsa <[email protected]>--- drivers/gpu/drm/i915/intel_dpll_mgr.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/intel_dpll_mgr.c +0
-0
drivers/gpu/drm/i915/intel_dpll_mgr.c ibx_get_dpll(struct intel_crtc *crtc, struct · line 434
Quoted 7 lines
drivers/gpu/drm/i915/intel_dpll_mgr.c +1
-0@@ -428,6 +428,7 @@ ibx_get_dpll(struct intel_crtc *crtc, structintel_crtc_state *crtc_state, struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); +struct intel_shared_dpll *pll;enum intel_dpll_id i;
This chunk does nothing and the space introduced is even against our coding style. Please review your own patches before submitting them to the mailing list: this is the kind of error that's very easy to catch by looking at the patch file, saving everybody's time.
drivers/gpu/drm/i915/intel_dpll_mgr.c static struct intel_shared_dpll * · line 2873
Quoted 8 lines
drivers/gpu/drm/i915/intel_dpll_mgr.c +3
-0@@ -2866,6 +2867,9 @@ static struct intel_shared_dpll * icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, struct intel_encoder *encoder) { + struct intel_digital_port *intel_dig_port = +enc_to_dig_port (&encoder->base); +
This chunk also adds a blank line that goes against our coding style.
Quoted 12 lines
drivers/gpu/drm/i915/intel_dpll_mgr.c +0
-0struct intel_shared_dpll *pll;struct intel_dpll_hw_state pll_state = {};drivers/gpu/drm/i915/intel_dpll_mgr.c +1
-1enum port port = encoder->port;@@ -2885,7 +2889,7 @@ icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, case PORT_D:case PORT_E :case PORT_F : -if (0 /* TODO: TBT PLLs */ ) { +if (intel_dig_port->tc_type ==TC_PORT_TBT ) { min =DPLL_ID_ICL_TBTPLL ; max = min;
Quoted 2 lines
ret = icl_calc_dpll_state(crtc_state,
encoder, clock,
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 34 lines
-----Original Message-----
From: Zanoni, Paulo R
Sent: Wednesday, July 25, 2018 3:41 PM
To: Srivatsa, Anusha <[email protected]>; intel- [email protected]
Cc: De Marchi, Lucas <[email protected]>
Subject: Re: [PATCH 1/2] drm/i915/icl: Add TBT checks for PLL calculationsEm Qua, 2018-07-25 às 14:28 -0700, Anusha Srivatsa escreveu:
Quoted 23 lines
Add missing TBT check in the Pll calculation.
v2: do not use a auxiliary function to check if status is TBT or not. (Paulo)
Cc Paulo Zanoni <[email protected]>Cc Lucas De Marchi <[email protected]>Signed-off-by Anusha Srivatsa <[email protected]>--- drivers/gpu/drm/i915/intel_dpll_mgr.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/intel_dpll_mgr.c +1
-0@@ -428,6 +428,7 @@ ibx_get_dpll(struct intel_crtc *crtc, structintel_crtc_state *crtc_state, struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); +
Quoted 9 lines
drivers/gpu/drm/i915/intel_dpll_mgr.c ibx_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, · line 433
Quoted 3 lines
drivers/gpu/drm/i915/intel_dpll_mgr.c +0
-0struct intel_shared_dpll *pll;enum intel_dpll_id i;This chunk does nothing and the space introduced is even against our coding style. Please review your own patches before submitting them to the mailing list:
this is the kind of error that's very easy to catch by looking at the patch file, saving everybody's time.
Oops :(
Agreed.
Quoted 12 lines
drivers/gpu/drm/i915/intel_dpll_mgr.c static struct intel_shared_dpll * · line 2872
Quoted 9 lines
drivers/gpu/drm/i915/intel_dpll_mgr.c +0
-0@@ -2866,6 +2867,9 @@ static struct intel_shared_dpll *icl_get_dpll(struct
intel_crtc*crtc, structintel_crtc_state*crtc_state,drivers/gpu/drm/i915/intel_dpll_mgr.c +3
-0struct intel_encoder *encoder) { +struct intel_digital_port *intel_dig_port = +enc_to_dig_port (&encoder->base); +This chunk also adds a blank line that goes against our coding style.
Will take care!
Thanks,
Anusha
Quoted 14 lines
Quoted 13 lines
drivers/gpu/drm/i915/intel_dpll_mgr.c +1
-1struct intel_shared_dpll *pll;struct intel_dpll_hw_state pll_state = {};enum port port = encoder->port;@@ -2885,7 +2889,7 @@ icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, case PORT_D:case PORT_E :case PORT_F : -if (0 /* TODO: TBT PLLs */ ) { +if (intel_dig_port->tc_type ==TC_PORT_TBT ) { min =DPLL_ID_ICL_TBTPLL ; max = min;Quoted 1 line
ret = icl_calc_dpll_state(crtc_state, encoder, clock,
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915/icl: Add TBT checks for PLL calculations
In reply to Anusha Srivatsa== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915/icl: Add TBT checks for PLL calculations
URL : https://patchwork.freedesktop.org/series/47248/
State : failure
== Summary ==
= CI Bug Log - changes from CI_DRM_4547 -> Patchwork_9770 =
== Summary - FAILURE ==
Serious unknown changes coming with Patchwork_9770 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_9770, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/47248/revisions/1/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_9770:
=== IGT changes ===
==== Possible regressions ====
igt@drv_selftest@live_objects:
fi-cnl-psr: NOTRUN -> DMESG-FAIL== Known issues ==
Here are the changes found in Patchwork_9770 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@debugfs_test@read_all_entries:
fi-snb-2520m: PASS -> INCOMPLETE (fdo#103713)
igt@drv_module_reload@basic-no-display:
fi-cnl-psr: NOTRUN -> DMESG-WARN (fdo#105395) +5
igt@drv_selftest@live_hangcheck:
{fi-cfl-8109u}: PASS -> DMESG-FAIL (fdo#106560)
igt@drv_selftest@live_workarounds:
fi-cnl-psr: NOTRUN -> DMESG-FAIL (fdo#107292)
igt@gem_exec_suspend@basic-s3:
{fi-skl-caroline}: NOTRUN -> INCOMPLETE (fdo#104108)
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#106000)
{igt@kms_psr@cursor_plane_move}:
fi-cnl-psr: NOTRUN -> DMESG-FAIL (fdo#107372) +1
{igt@kms_psr@primary_mmap_gtt}:
fi-cnl-psr: NOTRUN -> DMESG-WARN (fdo#107372)
igt@prime_vgem@basic-fence-wait-default:
fi-glk-j4005: PASS -> DMESG-WARN (fdo#105719)
==== Possible fixes ====
igt@drv_selftest@live_hangcheck:
fi-bxt-dsi: DMESG-FAIL (fdo#106560) -> PASS
igt@gem_exec_create@basic:
fi-glk-j4005: DMESG-WARN (fdo#106745) -> PASS
igt@kms_flip@basic-flip-vs-modeset:
fi-glk-j4005: DMESG-WARN (fdo#106000) -> PASS {name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#104108 https://bugs.freedesktop.org/show_bug.cgi?id=104108
fdo#105395 https://bugs.freedesktop.org/show_bug.cgi?id=105395
fdo#105719 https://bugs.freedesktop.org/show_bug.cgi?id=105719
fdo#106000 https://bugs.freedesktop.org/show_bug.cgi?id=106000
fdo#106560 https://bugs.freedesktop.org/show_bug.cgi?id=106560
fdo#106745 https://bugs.freedesktop.org/show_bug.cgi?id=106745
fdo#107292 https://bugs.freedesktop.org/show_bug.cgi?id=107292
fdo#107372 https://bugs.freedesktop.org/show_bug.cgi?id=107372
== Participating hosts (48 -> 45) ==
Additional (3): fi-byt-j1900 fi-skl-caroline fi-cnl-psr
Missing (6): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper
== Build changes ==
* Linux: CI_DRM_4547 -> Patchwork_9770
CI_DRM_4547: 0a7ab192a697e951b2404f3c1ce42c5fa74f9ed1 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4575: fe908a01012c9daafafb3410b9407725ca9d4f21 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_9770: 3dc2bc1d7aac475f7510af216b435d1f8ed87fc1 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
3dc2bc1d7aac drm/i915/icl: Set TBT IO in Aux transaction 2362a9dca728 drm/i915/icl: Add TBT checks for PLL calculations
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9770/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx