selftests/ftrace: Improve ftracetest with coverage check
Masami Hiramatsu
maintainercover selftests/ftrace: Improve ftracetest with coverage check
Hello,
Here is a series of patches for improving ftracetest testcase using gcov/lcov. It is still in progress, and I have got good improvement of line/function coverage under kernel/trace with this series. (Note that this kernel enables ftrace startup tests)
Without this series
Lines: 10156 17200 59.0 %
Functions: 1069 1772 60.3 %
With this series
Lines: 11130 17200 64.7 %
Functions: 1185 1772 66.9 %
Of course we don't need to make it 100%, because ftracetest is a function/specification test, and there are functions and lines which never be called (like critical error detection :) ). Also, ftrace has some amount of code for perf and bpf subsystem which should be tested by perf/bpf tests.
However, GCOV(LCOV) gives us a good insight into which functions are covered or not covered by the test cases.
This series has some ftracetest framework improvements too, which are for debugging ftracetest itself.
Tracing/Gcov-kernel:
- Add CONFIG_GCOV_PROFILE_FRACE, which enables gcov profiling only on tracing subsystem (under kernel/trace/). This may not needed for everyone (like a debugging feature).
So it can be dropped anyway.
Ftracetest framework improvements:
- Add --stop-fail for detecting failure soon.
- Add --console for interactively debugging a testcase by shell.
- Add testcase-number prefix to logfile for finding log easier.
- Improve general init function
- Call general init function after all testcases.
- Remove init/cleanup code from all testcase (since general init function will fixed it up)
Testcase fixes:
- Fix to check $comm availability.
- Make checkbashisms clean
Testcase improvements:
- Use loopback address instead of localhost
- Improve kprobe on module testcase to load/unload module
- Improve kprobe testcase to check log data
- Improve kretprobe testcase to check log data
- Test kprobe-event argument with various bitsize
- Check set_event_pid result
Adding testcases:
- Add kprobe event with $comm argument testcase
- Add kprobe profile testcase
- Add kprobe-event with symbol argument test
- Add nop tracer testcase
- Add trace_printk sample module testcase
- Add ringbuffer size changing testcase
- Add function profiling statistics testcase
- Add max stack tracer testcase
- Add function filter on module testcase
- Add trace_pipe testcase
TBD:
Following testcase improvements are remaining.
- Checking of various supported types (like u8, u64 etc.) testcases
- Filter actions for ftrace testcases
Thank you,
---
Masami Hiramatsu (25):
tracing: Allow gcov profiling on only ftrace subsystem selftests/ftrace: Add --stop-fail hidden option for debug selftests/ftrace: Add --console hidden option selftests/ftrace: Add case number prefix to logfile selftests/ftrace: More initialize features in initialize_ftrace selftests/ftrace: Cleanup ftrace after running test selftests/ftrace: Remove unneeded per-test init/cleanup ftrace selftests/ftrace: Fix to test kprobe $comm arg only if available selftests/ftrace: Fix checkbashisms errors
selftests/ftrace: Use loopback address instead of localhost selftests/ftrace: Improve kprobe on module testcase to load/unload module selftests/ftrace: Improve kprobe testcase to check log data selftests/ftrace: Improve kretprobe testcase to check log data selftests/ftrace: Test kprobe-event argument with various bitsize selftests/ftrace: Check set_event_pid result selftests/ftrace: Add kprobe event with $comm argument testcase selftests/ftrace: Add kprobe profile testcase selftests/ftrace: Add a testcase for nop tracer selftests/ftrace: Add kprobe-event with symbol argument test selftests/ftrace: Add trace_printk sample module test selftests/ftrace: Add ringbuffer size changing testcase selftests/ftrace: Add function profiling stat testcase selftests/ftrace: Add max stack tracer testcase selftests/ftrace: Add function filter on module testcase selftests/ftrace: Add trace_pipe testcase
kernel/trace/Kconfig | 13 +++++ kernel/trace/Makefile | 5 ++ tools/testing/selftests/ftrace/config | 5 ++ tools/testing/selftests/ftrace/ftracetest | 32 +++++++++++- .../ftrace/test.d/00basic/ringbuffer_size.tc | 21 ++++++++ .../selftests/ftrace/test.d/00basic/trace_pipe.tc | 15 ++++++ .../selftests/ftrace/test.d/event/event-enable.tc | 8 --- .../selftests/ftrace/test.d/event/event-pid.tc | 6 +- .../ftrace/test.d/event/subsystem-enable.tc | 8 --- .../ftrace/test.d/event/toplevel-enable.tc | 8 --- .../selftests/ftrace/test.d/event/trace_printk.tc | 27 ++++++++++ .../ftrace/test.d/ftrace/fgraph-filter-stack.tc | 4 -- .../ftrace/test.d/ftrace/fgraph-filter.tc | 9 --- .../ftrace/test.d/ftrace/func-filter-pid.tc | 8 --- .../ftrace/test.d/ftrace/func_event_triggers.tc | 3 - .../ftrace/test.d/ftrace/func_mod_trace.tc | 24 +++++++++ .../ftrace/test.d/ftrace/func_profile_stat.tc | 23 +++++++++ .../ftrace/test.d/ftrace/func_profiler.tc | 4 -- .../ftrace/test.d/ftrace/func_set_ftrace_file.tc | 13 ----- .../ftrace/test.d/ftrace/func_stack_tracer.tc | 39 +++++++++++++++ .../test.d/ftrace/func_traceonoff_triggers.tc | 11 ---- tools/testing/selftests/ftrace/test.d/functions | 4 ++ .../ftrace/test.d/kprobe/add_and_remove.tc | 3 - .../selftests/ftrace/test.d/kprobe/busy_check.tc | 3 - .../selftests/ftrace/test.d/kprobe/kprobe_args.tc | 8 ++- .../ftrace/test.d/kprobe/kprobe_args_comm.tc | 17 +++++++ .../ftrace/test.d/kprobe/kprobe_args_string.tc | 5 -- .../ftrace/test.d/kprobe/kprobe_args_symbol.tc | 39 +++++++++++++++ .../ftrace/test.d/kprobe/kprobe_args_syntax.tc | 8 +-- .../ftrace/test.d/kprobe/kprobe_args_type.tc | 52 ++++++++++++-------- .../ftrace/test.d/kprobe/kprobe_eventname.tc | 5 -- .../ftrace/test.d/kprobe/kprobe_ftrace.tc | 9 --- .../ftrace/test.d/kprobe/kprobe_module.tc | 36 ++++++++++++-- .../ftrace/test.d/kprobe/kretprobe_args.tc | 9 ++- .../ftrace/test.d/kprobe/kretprobe_maxactive.tc | 4 -- .../ftrace/test.d/kprobe/multiple_kprobes.tc | 5 -- .../selftests/ftrace/test.d/kprobe/probepoint.tc | 4 -- .../selftests/ftrace/test.d/kprobe/profile.tc | 15 ++++++ .../testing/selftests/ftrace/test.d/tracer/nop.tc | 22 ++++++++ .../inter-event/trigger-extended-error-support.tc | 12 ----- .../inter-event/trigger-field-variable-support.tc | 15 ------ .../trigger-inter-event-combined-hist.tc | 15 ------ .../inter-event/trigger-multi-actions-accept.tc | 14 ----- .../inter-event/trigger-onmatch-action-hist.tc | 15 ------ .../trigger-onmatch-onmax-action-hist.tc | 15 ------ .../inter-event/trigger-onmax-action-hist.tc | 15 ------ .../trigger-synthetic-event-createremove.tc | 12 ----- .../ftrace/test.d/trigger/trigger-eventonoff.tc | 12 ----- .../ftrace/test.d/trigger/trigger-filter.tc | 14 ----- .../ftrace/test.d/trigger/trigger-hist-mod.tc | 12 ----- .../ftrace/test.d/trigger/trigger-hist.tc | 12 ----- .../ftrace/test.d/trigger/trigger-multihist.tc | 16 ------ .../ftrace/test.d/trigger/trigger-snapshot.tc | 12 ----- .../ftrace/test.d/trigger/trigger-stacktrace.tc | 12 ----- .../test.d/trigger/trigger-trace-marker-hist.tc | 11 ---- .../trigger/trigger-trace-marker-snapshot.tc | 16 +----- .../trigger-trace-marker-synthetic-kernel.tc | 12 ----- .../trigger/trigger-trace-marker-synthetic.tc | 12 ----- .../ftrace/test.d/trigger/trigger-traceonoff.tc | 12 ----- 59 files changed, 388 insertions(+), 412 deletions(-) create mode 100644 tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_size.tc create mode 100644 tools/testing/selftests/ftrace/test.d/00basic/trace_pipe.tc create mode 100644 tools/testing/selftests/ftrace/test.d/event/trace_printk.tc create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_mod_trace.tc create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_profile_stat.tc create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_comm.tc create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_symbol.tc create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/profile.tc create mode 100644 tools/testing/selftests/ftrace/test.d/tracer/nop.tc
--
Masami Hiramatsu (Linaro)
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 1/25 tracing: Allow gcov profiling on only ftrace subsystem
Add GCOV_PROFILE_FTRACE to allow gcov profiling
on only files in ftrace subsystem. This kconfig
flag will be used for checking kselftest/ftrace
coverage.
--- kernel/trace/Kconfig | 13 +++++++++++++ kernel/trace/Makefile | 5 +++++ 2 files changed, 18 insertions(+)
kernel/trace/Kconfig +13 -0
@@ -722,6 +722,19 @@ config TRACING_EVENTS_GPIO help Enable tracing events for gpio subsystem +config GCOV_PROFILE_FTRACE + bool "Enable GCOV profiling on ftrace subsystem" + depends on GCOV_KERNEL + help + Enable GCOV profiling on ftrace subsystem for checking + which functions/lines are tested. + + If unsure, say N. + + Note that on a kernel compiled with this flags, ftrace will be + significantly run slower. So do not enable it for production + kernel. + endif # FTRACE endif # TRACING_SUPPORT
kernel/trace/Makefile +5 -0
@@ -18,6 +18,11 @@ ifdef CONFIG_TRACING_BRANCHES KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING endif +# for GCOV coverage profiling +ifdef CONFIG_GCOV_PROFILE_FTRACE +GCOV_PROFILE := y +endif + CFLAGS_trace_benchmark.o := -I$(src) CFLAGS_trace_events_filter.o := -I$(src)
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 2/25 selftests/ftrace: Add --stop-fail hidden option for debug
In reply to Masami HiramatsuAdd --stop-fail option for debugging the ftracetest.
--- tools/testing/selftests/ftrace/ftracetest | 13 +++++++++++++ 1 file changed, 13 insertions(+)
tools/testing/selftests/ftrace/ftracetest +13 -0
@@ -69,6 +69,10 @@ parse_opts() { # opts DEBUG=1 shift 1 ;; + --stop-fail) + STOP_FAILURE=1 + shift 1 + ;; --fail-unsupported) UNSUPPORTED_RESULT=1 shift 1
@@ -117,6 +121,7 @@ KEEP_LOG=0 DEBUG=0 VERBOSE=0 UNSUPPORTED_RESULT=0 +STOP_FAILURE=0 # Parse command-line options parse_opts $*
@@ -304,6 +309,10 @@ run_test() { # testfile # Main loop for t in $TEST_CASES; do run_test $t + if [ $STOP_FAILURE -ne 0 -a $TOTAL_RESULT -ne 0 ]; then + echo "A failure detected. Stop test." + exit 1 + fi done # Test on instance loop
@@ -315,6 +324,10 @@ for t in $TEST_CASES; do run_test $t rmdir $TRACING_DIR TRACING_DIR=$SAVED_TRACING_DIR + if [ $STOP_FAILURE -ne 0 -a $TOTAL_RESULT -ne 0 ]; then + echo "A failure detected. Stop test." + exit 1 + fi done prlog ""
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 3/25 selftests/ftrace: Add --console hidden option
In reply to Masami HiramatsuAdd --console hidden option for debug test cases.
This option allows to put "sh" or something else
when the test case hits a bug.
--- tools/testing/selftests/ftrace/ftracetest | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
tools/testing/selftests/ftrace/ftracetest +13 -1
@@ -60,11 +60,21 @@ parse_opts() { # opts shift 1 ;; --verbose|-v|-vv|-vvv) + if [ $VERBOSE -eq -1 ]; then + usage "--console can not use with --verbose" + fi VERBOSE=$((VERBOSE + 1)) [ $1 = '-vv' ] && VERBOSE=$((VERBOSE + 1)) [ $1 = '-vvv' ] && VERBOSE=$((VERBOSE + 2)) shift 1 ;; + --console) + if [ $VERBOSE -ne 0 ]; then + usage "--console can not use with --verbose" + fi + VERBOSE=-1 + shift 1 + ;; --debug|-d) DEBUG=1 shift 1
@@ -283,7 +293,9 @@ run_test() { # testfile testcase $1 echo "execute$INSTANCE: "$1 > $testlog SIG_RESULT=0 - if [ -z "$LOG_FILE" ]; then + if [ $VERBOSE -eq -1 ]; then + __run_test $1 + elif [ -z "$LOG_FILE" ]; then __run_test $1 2>&1 elif [ $VERBOSE -ge 3 ]; then __run_test $1 | tee -a $testlog 2>&1
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 4/25 selftests/ftrace: Add case number prefix to logfile
In reply to Masami HiramatsuAdd a case number prefix to each logfile. This makes it easier to find which logfile is corresponding to which failure.
--- tools/testing/selftests/ftrace/ftracetest | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
tools/testing/selftests/ftrace/ftracetest +2 -2
@@ -284,13 +284,13 @@ __run_test() { # testfile # Run one test case run_test() { # testfile local testname=`basename $1` + testcase $1 if [ ! -z "$LOG_FILE" ] ; then - local testlog=`mktemp $LOG_DIR/${testname}-log.XXXXXX` + local testlog=`mktemp $LOG_DIR/${CASENO}-${testname}-log.XXXXXX` else local testlog=/proc/self/fd/1 fi export TMPDIR=`mktemp -d /tmp/ftracetest-dir.XXXXXX` - testcase $1 echo "execute$INSTANCE: "$1 > $testlog SIG_RESULT=0 if [ $VERBOSE -eq -1 ]; then
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 5/25 selftests/ftrace: More initialize features in initialize_ftrace
In reply to Masami HiramatsuClear pid filter, synthetic_events, snapshots,
and trace log in initialize_ftrace(), since
those are used in test cases.
--- tools/testing/selftests/ftrace/test.d/functions | 4 ++++ 1 file changed, 4 insertions(+)
tools/testing/selftests/ftrace/test.d/functions +4 -0
@@ -91,10 +91,14 @@ initialize_ftrace() { # Reset ftrace to initial-state reset_events_filter disable_events echo > set_event_pid # event tracer is always on + echo > set_ftrace_pid [ -f set_ftrace_filter ] && echo | tee set_ftrace_* [ -f set_graph_function ] && echo | tee set_graph_* [ -f stack_trace_filter ] && echo > stack_trace_filter [ -f kprobe_events ] && echo > kprobe_events [ -f uprobe_events ] && echo > uprobe_events + [ -f synthetic_events ] && echo > synthetic_events + [ -f snapshot ] && echo 0 > snapshot + clear_trace enable_tracing }
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 6/25 selftests/ftrace: Cleanup ftrace after running test
In reply to Masami HiramatsuCleanup ftrace by initialize_ftrace() after running all test cases. This means we also don't need cleanup ftrace on each test case, except for some special options.
--- tools/testing/selftests/ftrace/ftracetest | 1 + 1 file changed, 1 insertion(+)
tools/testing/selftests/ftrace/ftracetest +1 -0
@@ -341,6 +341,7 @@ for t in $TEST_CASES; do exit 1 fi done +(cd $TRACING_DIR; initialize_ftrace) # for cleanup prlog "" prlog "# of passed: " `echo $PASSED_CASES | wc -w`
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 7/25 selftests/ftrace: Remove unneeded per-test init/cleanup ftrace
In reply to Masami HiramatsuSince ftracetest framework calls initialize_ftrace() right before each test and after all tests, we don't need to init/cleanup ftrace for each test case.
Just remove such unneeded init/cleanup code because it can increase logfile size.
--- .../selftests/ftrace/test.d/event/event-enable.tc | 6 ------ .../selftests/ftrace/test.d/event/event-pid.tc | 3 +-- .../ftrace/test.d/event/subsystem-enable.tc | 6 ------ .../ftrace/test.d/event/toplevel-enable.tc | 6 ------ .../ftrace/test.d/ftrace/fgraph-filter-stack.tc | 4 ---- .../ftrace/test.d/ftrace/fgraph-filter.tc | 9 --------- .../ftrace/test.d/ftrace/func-filter-pid.tc | 6 ------ .../ftrace/test.d/ftrace/func_event_triggers.tc | 3 --- .../ftrace/test.d/ftrace/func_profiler.tc | 4 ---- .../ftrace/test.d/ftrace/func_set_ftrace_file.tc | 13 ------------- .../test.d/ftrace/func_traceonoff_triggers.tc | 11 ----------- .../ftrace/test.d/kprobe/add_and_remove.tc | 3 --- .../selftests/ftrace/test.d/kprobe/busy_check.tc | 3 --- .../selftests/ftrace/test.d/kprobe/kprobe_args.tc | 2 -- .../ftrace/test.d/kprobe/kprobe_args_string.tc | 5 ----- .../ftrace/test.d/kprobe/kprobe_args_syntax.tc | 5 ----- .../ftrace/test.d/kprobe/kprobe_args_type.tc | 4 ---- .../ftrace/test.d/kprobe/kprobe_eventname.tc | 5 ----- .../ftrace/test.d/kprobe/kprobe_ftrace.tc | 9 --------- .../ftrace/test.d/kprobe/kprobe_module.tc | 5 ----- .../ftrace/test.d/kprobe/kretprobe_args.tc | 2 -- .../ftrace/test.d/kprobe/kretprobe_maxactive.tc | 4 ---- .../ftrace/test.d/kprobe/multiple_kprobes.tc | 5 ----- .../selftests/ftrace/test.d/kprobe/probepoint.tc | 4 ---- .../inter-event/trigger-extended-error-support.tc | 12 ------------ .../inter-event/trigger-field-variable-support.tc | 13 ------------- .../trigger-inter-event-combined-hist.tc | 13 ------------- .../inter-event/trigger-multi-actions-accept.tc | 14 -------------- .../inter-event/trigger-onmatch-action-hist.tc | 13 ------------- .../trigger-onmatch-onmax-action-hist.tc | 13 ------------- .../inter-event/trigger-onmax-action-hist.tc | 13 ------------- .../trigger-synthetic-event-createremove.tc | 12 ------------ .../ftrace/test.d/trigger/trigger-eventonoff.tc | 12 ------------ .../ftrace/test.d/trigger/trigger-filter.tc | 14 -------------- .../ftrace/test.d/trigger/trigger-hist-mod.tc | 12 ------------ .../ftrace/test.d/trigger/trigger-hist.tc | 12 ------------ .../ftrace/test.d/trigger/trigger-multihist.tc | 16 ---------------- .../ftrace/test.d/trigger/trigger-snapshot.tc | 12 ------------ .../ftrace/test.d/trigger/trigger-stacktrace.tc | 12 ------------ .../test.d/trigger/trigger-trace-marker-hist.tc | 11 ----------- .../trigger/trigger-trace-marker-snapshot.tc | 12 ------------ .../trigger-trace-marker-synthetic-kernel.tc | 12 ------------ .../trigger/trigger-trace-marker-synthetic.tc | 12 ------------ .../ftrace/test.d/trigger/trigger-traceonoff.tc | 12 ------------ 44 files changed, 1 insertion(+), 378 deletions(-)
tools/testing/selftests/ftrace/test.d/event/event-enable.tc +0 -6
@@ -9,7 +9,6 @@ do_reset() { } fail() { #msg - do_reset echo $1 exit_fail }
@@ -23,9 +22,6 @@ if [ ! -f set_event -o ! -d events/sched ]; then exit_unsupported fi -reset_tracer -do_reset - echo 'sched:sched_switch' > set_event yield
@@ -57,6 +53,4 @@ if [ $count -ne 0 ]; then fail "sched_switch events should not be recorded" fi -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/event/event-pid.tc +1 -2
@@ -30,8 +30,7 @@ if [ ! -f set_event_pid ]; then exit_unsupported fi -reset_tracer -do_reset +echo 0 > options/event-fork echo 1 > events/sched/sched_switch/enable
tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc +0 -6
@@ -9,7 +9,6 @@ do_reset() { } fail() { #msg - do_reset echo $1 exit_fail }
@@ -23,9 +22,6 @@ if [ ! -f set_event -o ! -d events/sched ]; then exit_unsupported fi -reset_tracer -do_reset - echo 'sched:*' > set_event yield
@@ -57,6 +53,4 @@ if [ $count -ne 0 ]; then fail "any of scheduler events should not be recorded" fi -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc +0 -6
@@ -8,7 +8,6 @@ do_reset() { } fail() { #msg - do_reset echo $1 exit_fail }
@@ -22,9 +21,6 @@ if [ ! -f available_events -o ! -f set_event -o ! -d events ]; then exit_unsupported fi -reset_tracer -do_reset - echo '*:*' > set_event yield
@@ -60,6 +56,4 @@ if [ $count -ne 0 ]; then fail "any of events should not be recorded" fi -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc +0 -4
@@ -16,13 +16,9 @@ if [ ! -f set_ftrace_filter ]; then fi do_reset() { - reset_tracer if [ -e /proc/sys/kernel/stack_tracer_enabled ]; then echo 0 > /proc/sys/kernel/stack_tracer_enabled fi - enable_tracing - clear_trace - echo > set_ftrace_filter } fail() { # msg
tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc +0 -9
@@ -9,14 +9,7 @@ if ! grep -q function_graph available_tracers; then exit_unsupported fi -do_reset() { - reset_tracer - enable_tracing - clear_trace -} - fail() { # msg - do_reset echo $1 exit_fail }
@@ -48,6 +41,4 @@ if [ $count -eq 0 ]; then fail "No schedule traces found?" fi -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc +0 -6
@@ -35,12 +35,6 @@ if [ $do_function_fork -eq 1 ]; then fi do_reset() { - reset_tracer - clear_trace - enable_tracing - echo > set_ftrace_filter - echo > set_ftrace_pid - if [ $do_function_fork -eq 0 ]; then return fi
tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc +0 -3
@@ -25,15 +25,12 @@ do_reset() { } fail() { # mesg - do_reset echo $1 exit_fail } SLEEP_TIME=".1" -do_reset - echo "Testing function probes with events:" EVENT="sched:sched_switch"
tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc +0 -4
@@ -29,8 +29,6 @@ if [ ! -f function_profile_enabled ]; then fi fail() { # mesg - reset_tracer - echo > set_ftrace_filter echo $1 exit_fail }
@@ -76,6 +74,4 @@ if ! grep -v -e '^#' -e 'schedule' trace > /dev/null; then fail "no other functions besides schedule was found" fi -reset_tracer - exit 0
tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc +0 -13
@@ -15,22 +15,11 @@ if [ ! -f set_ftrace_filter ]; then exit_unsupported fi -do_reset() { - reset_tracer - reset_ftrace_filter - disable_events - clear_trace - enable_tracing -} - fail() { # mesg - do_reset echo $1 exit_fail } -do_reset - FILTER=set_ftrace_filter FUNC1="schedule" FUNC2="do_softirq"
@@ -165,6 +154,4 @@ test_actual rm $TMPDIR/expected rm $TMPDIR/actual -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc +0 -11
@@ -16,24 +16,13 @@ if [ ! -f set_ftrace_filter ]; then exit_unsupported fi -do_reset() { - reset_ftrace_filter - reset_tracer - disable_events - clear_trace - enable_tracing -} - fail() { # mesg - do_reset echo $1 exit_fail } SLEEP_TIME=".1" -do_reset - echo "Testing function probes with enabling disabling tracing:" cnt_trace() {
tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc +0 -3
@@ -4,10 +4,7 @@ [ -f kprobe_events ] || exit_unsupported # this is configurable -echo 0 > events/enable -echo > kprobe_events echo p:myevent _do_fork > kprobe_events grep myevent kprobe_events test -d events/kprobes/myevent echo > kprobe_events -clear_trace
tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc +0 -3
@@ -4,12 +4,9 @@ [ -f kprobe_events ] || exit_unsupported -echo 0 > events/enable -echo > kprobe_events echo p:myevent _do_fork > kprobe_events test -d events/kprobes/myevent echo 1 > events/kprobes/myevent/enable echo > kprobe_events && exit_fail # this must fail echo 0 > events/kprobes/myevent/enable echo > kprobe_events # this must succeed -clear_trace
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc +0 -2
@@ -4,8 +4,6 @@ [ -f kprobe_events ] || exit_unsupported # this is configurable -echo 0 > events/enable -echo > kprobe_events echo 'p:testprobe _do_fork $stack $stack0 +0($stack)' > kprobe_events grep testprobe kprobe_events test -d events/kprobes/testprobe
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc +0 -5
@@ -4,9 +4,6 @@ [ -f kprobe_events ] || exit_unsupported # this is configurable -echo 0 > events/enable -echo > kprobe_events - case `uname -m` in x86_64) ARG1=%di
@@ -44,5 +41,3 @@ echo 1 > events/kprobes/testprobe/enable echo "p:test _do_fork" >> kprobe_events grep -qe "testprobe.* arg1=\"test\" arg2=\"test\"" trace -echo 0 > events/enable -echo > kprobe_events
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc +0 -5
@@ -6,9 +6,6 @@ grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue -echo 0 > events/enable -echo > kprobe_events - PROBEFUNC="vfs_read" GOODREG= BADREG=
@@ -100,5 +97,3 @@ test_badarg "${GOODREG}::${GOODTYPE}" "${GOODREG}:${BADTYPE}" \ test_goodarg "\$comm:string" "+0(\$stack):string" test_badarg "\$comm:x64" "\$stack:string" "${GOODREG}:string" - -echo > kprobe_events
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc +0 -4
@@ -6,10 +6,6 @@ grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue -echo 0 > events/enable -echo > kprobe_events -enable_tracing - echo 'p:testprobe _do_fork $stack0:s32 $stack0:u32 $stack0:x32 $stack0:b8 at 4/32' > kprobe_events grep testprobe kprobe_events test -d events/kprobes/testprobe
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_eventname.tc +0 -5
@@ -4,9 +4,6 @@ [ -f kprobe_events ] || exit_unsupported # this is configurable -disable_events -echo > kprobe_events - :;: "Add an event on function without name" ;: FUNC=`grep " [tT] .*vfs_read$" /proc/kallsyms | tail -n 1 | cut -f 3 -d " "`
@@ -33,5 +30,3 @@ echo "p $FUNC" > kprobe_events EVENT=`grep $FUNC kprobe_events | cut -f 1 -d " " | cut -f 2 -d:` [ "x" != "x$EVENT" ] || exit_failure test -d events/$EVENT || exit_failure - -echo > kprobe_events
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc +0 -9
@@ -8,8 +8,6 @@ grep function available_tracers || exit_unsupported # this is configurable # prepare echo nop > current_tracer echo _do_fork > set_ftrace_filter -echo 0 > events/enable -echo > kprobe_events echo 'p:testprobe _do_fork' > kprobe_events # kprobe on / ftrace off
@@ -47,10 +45,3 @@ echo > trace ( echo "forked") grep testprobe trace ! grep '_do_fork <-' trace - -# cleanup -echo nop > current_tracer -echo > set_ftrace_filter -echo 0 > events/kprobes/testprobe/enable -echo > kprobe_events -echo > trace
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc +0 -5
@@ -4,9 +4,6 @@ [ -f kprobe_events ] || exit_unsupported # this is configurable -disable_events -echo > kprobe_events - :;: "Add an event on a module function without specifying event name" ;: MOD=`lsmod | head -n 2 | tail -n 1 | cut -f1 -d" "`
@@ -25,5 +22,3 @@ test -d events/kprobes/event1 || exit_failure echo "p:kprobes1/event1 $MOD:$FUNC" > kprobe_events test -d events/kprobes1/event1 || exit_failure - -echo > kprobe_events
tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc +0 -2
@@ -4,8 +4,6 @@ [ -f kprobe_events ] || exit_unsupported # this is configurable -echo 0 > events/enable -echo > kprobe_events echo 'r:testprobe2 _do_fork $retval' > kprobe_events grep testprobe2 kprobe_events test -d events/kprobes/testprobe2
tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_maxactive.tc +0 -4
@@ -5,8 +5,6 @@ [ -f kprobe_events ] || exit_unsupported # this is configurable grep -q 'r\[maxactive\]' README || exit_unsupported # this is older version -echo > kprobe_events - # Test if we successfully reject unknown messages if echo 'a:myprobeaccept inet_csk_accept' > kprobe_events; then false; else true; fi
@@ -37,5 +35,3 @@ echo > kprobe_events echo 'r10 inet_csk_accept' > kprobe_events grep inet_csk_accept kprobe_events echo > kprobe_events - -clear_trace
tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc +0 -5
@@ -12,11 +12,6 @@ case `uname -m` in *) OFFS=0;; esac -if [ -d events/kprobes ]; then - echo 0 > events/kprobes/enable - echo > kprobe_events -fi - N=0 echo "Setup up kprobes on first available 256 text symbols" grep -i " t " /proc/kallsyms | cut -f3 -d" " | grep -v .*\\..* | \
tools/testing/selftests/ftrace/test.d/kprobe/probepoint.tc +0 -4
@@ -30,8 +30,6 @@ if [ `printf "%x" -1 | wc -c` != 9 ]; then UINT_TEST=yes fi -echo 0 > events/enable -echo > kprobe_events echo "p:testprobe ${TARGET_FUNC}" > kprobe_events echo "p:testprobe ${TARGET}" > kprobe_events echo "p:testprobe ${TARGET_FUNC}${NEXT}" > kprobe_events
@@ -39,5 +37,3 @@ echo "p:testprobe ${TARGET_FUNC}${NEXT}" > kprobe_events if [ "${UINT_TEST}" = yes ]; then ! echo "p:testprobe ${TARGET_FUNC}${OVERFLOW}" > kprobe_events fi -echo > kprobe_events -clear_trace
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-extended-error-support.tc +0 -12
@@ -2,14 +2,7 @@ # description: event trigger - test extended error support -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -24,9 +17,6 @@ if [ ! -f synthetic_events ]; then exit_unsupported fi -reset_tracer -do_reset - echo "Test extended error support" echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_wakeup/trigger ! echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' >> events/sched/sched_wakeup/trigger 2> /dev/null
@@ -34,6 +24,4 @@ if ! grep -q "ERROR:" events/sched/sched_wakeup/hist; then fail "Failed to generate extended error in histogram" fi -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc +0 -13
@@ -1,14 +1,7 @@ #!/bin/sh # description: event trigger - test field variable support -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then exit_unsupported fi -clear_synthetic_events -reset_tracer -do_reset - echo "Test field variable support" echo 'wakeup_latency u64 lat; pid_t pid; int prio; char comm[16]' > synthetic_events
@@ -49,6 +38,4 @@ if grep -q "synthetic_prio=prio" events/sched/sched_waking/hist; then fail "Failed to remove histogram with field variable" fi -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc +0 -13
@@ -1,14 +1,7 @@ #!/bin/sh # description: event trigger - test inter-event combined histogram trigger -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then exit_unsupported fi -reset_tracer -do_reset -clear_synthetic_events - echo "Test create synthetic event" echo 'waking_latency u64 lat pid_t pid' > synthetic_events
@@ -53,6 +42,4 @@ if ! grep -q "pid:" events/synthetic/waking+wakeup_latency/hist; then fail "Failed to create combined histogram" fi -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-multi-actions-accept.tc +0 -14
@@ -1,15 +1,7 @@ #!/bin/sh # description: event trigger - test multiple actions on hist trigger - -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -24,10 +16,6 @@ if [ ! -f synthetic_events ]; then exit_unsupported fi -clear_synthetic_events -reset_tracer -do_reset - echo "Test multiple actions on hist trigger" echo 'wakeup_latency u64 lat; pid_t pid' >> synthetic_events TRIGGER1=events/sched/sched_wakeup/trigger
@@ -39,6 +27,4 @@ echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_ echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> $TRIGGER2 echo 'hist:keys=next_pid if next_comm=="cyclictest"' >> $TRIGGER2 -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc +0 -13
@@ -1,14 +1,7 @@ #!/bin/sh # description: event trigger - test inter-event histogram trigger onmatch action -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then exit_unsupported fi -clear_synthetic_events -reset_tracer -do_reset - echo "Test create synthetic event" echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events
@@ -45,6 +34,4 @@ if ! grep -q "ping" events/synthetic/wakeup_latency/hist; then fail "Failed to create onmatch action inter-event histogram" fi -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc +0 -13
@@ -1,14 +1,7 @@ #!/bin/sh # description: event trigger - test inter-event histogram trigger onmatch-onmax action -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then exit_unsupported fi -clear_synthetic_events -reset_tracer -do_reset - echo "Test create synthetic event" echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events
@@ -45,6 +34,4 @@ if [ ! grep -q "ping" events/synthetic/wakeup_latency/hist -o ! grep -q "max:" e fail "Failed to create onmatch-onmax action inter-event histogram" fi -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc +0 -13
@@ -1,14 +1,7 @@ #!/bin/sh # description: event trigger - test inter-event histogram trigger onmax action -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then exit_unsupported fi -clear_synthetic_events -reset_tracer -do_reset - echo "Test create synthetic event" echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events
@@ -43,6 +32,4 @@ if ! grep -q "max:" events/sched/sched_switch/hist; then fail "Failed to create onmax action inter-event histogram" fi -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-createremove.tc +0 -12
@@ -1,13 +1,7 @@ #!/bin/sh # description: event trigger - test synthetic event create remove -do_reset() { - reset_trigger - echo > set_event - clear_trace -} fail() { #msg - do_reset echo $1 exit_fail }
@@ -22,10 +16,6 @@ if [ ! -f synthetic_events ]; then exit_unsupported fi -clear_synthetic_events -reset_tracer -do_reset - echo "Test create synthetic event" echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events
@@ -49,6 +39,4 @@ if [ -d events/synthetic/wakeup_latency ]; then fail "Failed to delete wakeup_latency synthetic event" fi -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/trigger-eventonoff.tc +0 -12
@@ -3,14 +3,7 @@ # description: event trigger - test event enable/disable trigger # flags: instance -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -25,9 +18,6 @@ if [ ! -f events/sched/sched_process_fork/trigger ]; then exit_unsupported fi -reset_tracer -do_reset - FEATURE=`grep enable_event events/sched/sched_process_fork/trigger` if [ -z "$FEATURE" ]; then echo "event enable/disable trigger is not supported"
@@ -61,6 +51,4 @@ echo 'enable_event:sched:sched_switch' > events/sched/sched_process_fork/trigger ! echo 'enable_event:sched:sched_switch' > events/sched/sched_process_fork/trigger ! echo 'disable_event:sched:sched_switch' > events/sched/sched_process_fork/trigger -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/trigger-filter.tc +0 -14
@@ -3,14 +3,7 @@ # description: event trigger - test trigger filter # flags: instance -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -25,9 +18,6 @@ if [ ! -f events/sched/sched_process_fork/trigger ]; then exit_unsupported fi -reset_tracer -do_reset - echo "Test trigger filter" echo 1 > tracing_on echo 'traceoff if child_pid == 0' > events/sched/sched_process_fork/trigger
@@ -54,8 +44,4 @@ echo '!traceoff' > events/sched/sched_process_fork/trigger echo 'traceoff if parent_pid >= 0 || child_pid >= 0' > events/sched/sched_process_fork/trigger echo '!traceoff' > events/sched/sched_process_fork/trigger - - -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/trigger-hist-mod.tc +0 -12
@@ -3,14 +3,7 @@ # description: event trigger - test histogram modifiers # flags: instance -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -30,9 +23,6 @@ if [ ! -f events/sched/sched_process_fork/hist ]; then exit_unsupported fi -reset_tracer -do_reset - echo "Test histogram with execname modifier" echo 'hist:keys=common_pid.execname' > events/sched/sched_process_fork/trigger
@@ -71,6 +61,4 @@ for i in `seq 1 10` ; do ( echo "forked" > /dev/null); done grep 'bytes_req: ~ 2^[0-9]*' events/kmem/kmalloc/hist > /dev/null || \ fail "log2 modifier on kmem/kmalloc did not work" -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/trigger-hist.tc +0 -12
@@ -3,14 +3,7 @@ # description: event trigger - test histogram trigger # flags: instance -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -30,9 +23,6 @@ if [ ! -f events/sched/sched_process_fork/hist ]; then exit_unsupported fi -reset_tracer -do_reset - echo "Test histogram basic tigger" echo 'hist:keys=parent_pid:vals=child_pid' > events/sched/sched_process_fork/trigger
@@ -79,6 +69,4 @@ check_inc `grep -o "child_pid:[[:space:]]*[[:digit:]]*" \ events/sched/sched_process_fork/hist | cut -d: -f2 ` || fail "sort param on sched_process_fork did not work" -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/trigger-multihist.tc +0 -16
@@ -3,14 +3,7 @@ # description: event trigger - test multiple histogram triggers # flags: instance -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -30,11 +23,6 @@ if [ ! -f events/sched/sched_process_fork/hist ]; then exit_unsupported fi -reset_tracer -do_reset - -reset_trigger - echo "Test histogram multiple tiggers" echo 'hist:keys=parent_pid:vals=child_pid' > events/sched/sched_process_fork/trigger
@@ -67,8 +55,4 @@ grep test_hist events/sched/sched_process_exit/hist > /dev/null || \ diffs=`diff events/sched/sched_process_exit/hist events/sched/sched_process_fork/hist | wc -l` test $diffs -eq 0 || fail "Same name histograms are not same" -reset_trigger - -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/trigger-snapshot.tc +0 -12
@@ -2,14 +2,7 @@ # SPDX-License-Identifier: GPL-2.0 # description: event trigger - test snapshot-trigger -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -29,9 +22,6 @@ if [ ! -f snapshot ]; then exit_unsupported fi -reset_tracer -do_reset - FEATURE=`grep snapshot events/sched/sched_process_fork/trigger` if [ -z "$FEATURE" ]; then echo "snapshot trigger is not supported"
@@ -57,6 +47,4 @@ echo "Test snapshot semantic errors" echo "snapshot" > events/sched/sched_process_fork/trigger ! echo "snapshot" > events/sched/sched_process_fork/trigger -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/trigger-stacktrace.tc +0 -12
@@ -2,14 +2,7 @@ # SPDX-License-Identifier: GPL-2.0 # description: event trigger - test stacktrace-trigger -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -24,9 +17,6 @@ if [ ! -f events/sched/sched_process_fork/trigger ]; then exit_unsupported fi -reset_tracer -do_reset - FEATURE=`grep stacktrace events/sched/sched_process_fork/trigger` if [ -z "$FEATURE" ]; then echo "stacktrace trigger is not supported"
@@ -49,6 +39,4 @@ echo "Test stacktrace semantic errors" echo "stacktrace" > events/sched/sched_process_fork/trigger ! echo "stacktrace" > events/sched/sched_process_fork/trigger -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-hist.tc +0 -11
@@ -3,14 +3,7 @@ # description: trace_marker trigger - test histogram trigger # flags: instance -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -35,8 +28,6 @@ if [ ! -f events/ftrace/print/hist ]; then exit_unsupported fi -do_reset - echo "Test histogram trace_marker tigger" echo 'hist:keys=common_pid' > events/ftrace/print/trigger
@@ -44,6 +35,4 @@ for i in `seq 1 10` ; do echo "hello" > trace_marker; done grep 'hitcount: *10$' events/ftrace/print/hist > /dev/null || \ fail "hist trigger did not trigger correct times on trace_marker" -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-snapshot.tc +0 -12
@@ -3,15 +3,7 @@ # description: trace_marker trigger - test snapshot trigger # flags: instance -do_reset() { - reset_trigger - echo > set_event - echo 0 > snapshot - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -54,8 +46,6 @@ test_trace() { done } -do_reset - echo "Test snapshot trace_marker tigger" echo 'snapshot' > events/ftrace/print/trigger
@@ -69,6 +59,4 @@ for i in `seq 1 10` ; do echo "hello >$i<" > trace_marker; done test_trace trace 1 test_trace snapshot 2 -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-synthetic-kernel.tc +0 -12
@@ -3,15 +3,7 @@ # description: trace_marker trigger - test histogram with synthetic event against kernel event # flags: -do_reset() { - reset_trigger - echo > set_event - echo > synthetic_events - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -46,8 +38,6 @@ if [ ! -f events/ftrace/print/hist ]; then exit_unsupported fi -do_reset - echo "Test histogram kernel event to trace_marker latency histogram trigger" echo 'latency u64 lat' > synthetic_events
@@ -63,6 +53,4 @@ grep 'hitcount: *1$' events/ftrace/print/hist > /dev/null || \ grep 'hitcount: *1$' events/synthetic/latency/hist > /dev/null || \ fail "hist trigger did not trigger " -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-synthetic.tc +0 -12
@@ -3,15 +3,7 @@ # description: trace_marker trigger - test histogram with synthetic event # flags: -do_reset() { - reset_trigger - echo > set_event - echo > synthetic_events - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -41,8 +33,6 @@ if [ ! -f events/ftrace/print/hist ]; then exit_unsupported fi -do_reset - echo "Test histogram trace_marker to trace_marker latency histogram trigger" echo 'latency u64 lat' > synthetic_events
@@ -61,6 +51,4 @@ fi grep 'hitcount: *1$' events/synthetic/latency/hist > /dev/null || \ fail "hist trigger did not trigger " -do_reset - exit 0
tools/testing/selftests/ftrace/test.d/trigger/trigger-traceonoff.tc +0 -12
@@ -2,14 +2,7 @@ # SPDX-License-Identifier: GPL-2.0 # description: event trigger - test traceon/off trigger -do_reset() { - reset_trigger - echo > set_event - clear_trace -} - fail() { #msg - do_reset echo $1 exit_fail }
@@ -24,9 +17,6 @@ if [ ! -f events/sched/sched_process_fork/trigger ]; then exit_unsupported fi -reset_tracer -do_reset - echo "Test traceoff trigger" echo 1 > tracing_on echo 'traceoff' > events/sched/sched_process_fork/trigger
@@ -54,6 +44,4 @@ echo 'traceon' > events/sched/sched_process_fork/trigger ! echo 'traceon' > events/sched/sched_process_fork/trigger ! echo 'traceoff' > events/sched/sched_process_fork/trigger -do_reset - exit 0
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 8/25 selftests/ftrace: Fix to test kprobe $comm arg only if available
In reply to Masami HiramatsuTest $comm in kprobe-event argument syntax testcase only if it is supported on the kernel because $comm has been introduced 4.8 kernel.
So on older stable kernel, it should be skipped.
--- .../ftrace/test.d/kprobe/kprobe_args_syntax.tc | 3 +++ 1 file changed, 3 insertions(+)
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc +3 -0
@@ -75,8 +75,11 @@ test_badarg "\$stackp" "\$stack0+10" "\$stack1-10" echo "r ${PROBEFUNC} \$retval" > kprobe_events ! echo "p ${PROBEFUNC} \$retval" > kprobe_events +# $comm was introduced in 4.8, older kernels reject it. +if grep -A1 "fetcharg:" README | grep -q '\$comm' ; then : "Comm access" test_goodarg "\$comm" +fi : "Indirect memory access" test_goodarg "+0(${GOODREG})" "-0(${GOODREG})" "+10(\$stack)" \
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 9/25 selftests/ftrace: Fix checkbashisms errors
In reply to Masami HiramatsuFix a test case to make checkbashisms clean.
--- .../trigger/trigger-trace-marker-snapshot.tc | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-snapshot.tc +2 -2
@@ -39,10 +39,10 @@ test_trace() { fi echo "testing $line for >$x<" match=`echo $line | sed -e "s/>$x<//"` - if [ "$line" == "$match" ]; then + if [ "$line" = "$match" ]; then fail "$line does not have >$x< in it" fi - let x=$x+2 + x=$((x+2)) done }
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 10/25 selftests/ftrace: Use loopback address instead of localhost
In reply to Masami HiramatsuUse raw loopback address instead of localhost, because "localhost" can depend on nsswitch and in some case we can not resolve the localhost.
--- .../selftests/ftrace/test.d/event/event-enable.tc | 2 +- .../selftests/ftrace/test.d/event/event-pid.tc | 2 +- .../ftrace/test.d/event/subsystem-enable.tc | 2 +- .../ftrace/test.d/event/toplevel-enable.tc | 2 +- .../ftrace/test.d/ftrace/func-filter-pid.tc | 2 +- .../inter-event/trigger-field-variable-support.tc | 2 +- .../trigger-inter-event-combined-hist.tc | 2 +- .../inter-event/trigger-onmatch-action-hist.tc | 2 +- .../trigger-onmatch-onmax-action-hist.tc | 2 +- .../inter-event/trigger-onmax-action-hist.tc | 2 +- 10 files changed, 10 insertions(+), 10 deletions(-)
tools/testing/selftests/ftrace/test.d/event/event-enable.tc +1 -1
@@ -14,7 +14,7 @@ fail() { #msg } yield() { - ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1 + ping 127.0.0.1 -c 1 || sleep .001 || usleep 1 || sleep 1 } if [ ! -f set_event -o ! -d events/sched ]; then
tools/testing/selftests/ftrace/test.d/event/event-pid.tc +1 -1
@@ -17,7 +17,7 @@ fail() { #msg } yield() { - ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1 + ping 127.0.0.1 -c 1 || sleep .001 || usleep 1 || sleep 1 } if [ ! -f set_event -o ! -d events/sched ]; then
tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc +1 -1
@@ -14,7 +14,7 @@ fail() { #msg } yield() { - ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1 + ping 127.0.0.1 -c 1 || sleep .001 || usleep 1 || sleep 1 } if [ ! -f set_event -o ! -d events/sched ]; then
tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc +1 -1
@@ -13,7 +13,7 @@ fail() { #msg } yield() { - ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1 + ping 127.0.0.1 -c 1 || sleep .001 || usleep 1 || sleep 1 } if [ ! -f available_events -o ! -f set_event -o ! -d events ]; then
tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc +1 -1
@@ -49,7 +49,7 @@ fail() { # msg } yield() { - ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1 + ping 127.0.0.1 -c 1 || sleep .001 || usleep 1 || sleep 1 } do_test() {
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc +1 -1
@@ -23,7 +23,7 @@ echo 'hist:keys=comm:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/ echo 'hist:keys=next_comm:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,sched.sched_waking.prio,next_comm) if next_comm=="ping"' > events/sched/sched_switch/trigger echo 'hist:keys=pid,prio,comm:vals=lat:sort=pid,prio' > events/synthetic/wakeup_latency/trigger -ping localhost -c 3 +ping 127.0.0.1 -c 3 if ! grep -q "ping" events/synthetic/wakeup_latency/hist; then fail "Failed to create inter-event histogram" fi
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc +1 -1
@@ -37,7 +37,7 @@ echo 'waking+wakeup_latency u64 lat; pid_t pid' >> synthetic_events echo 'hist:keys=pid,lat:sort=pid,lat:ww_lat=$waking_lat+$wakeup_lat:onmatch(synthetic.wakeup_latency).waking+wakeup_latency($ww_lat,pid)' >> events/synthetic/wakeup_latency/trigger echo 'hist:keys=pid,lat:sort=pid,lat' >> events/synthetic/waking+wakeup_latency/trigger -ping localhost -c 3 +ping 127.0.0.1 -c 3 if ! grep -q "pid:" events/synthetic/waking+wakeup_latency/hist; then fail "Failed to create combined histogram" fi
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc +1 -1
@@ -29,7 +29,7 @@ echo "Test histogram variables,simple expression support and onmatch action" echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_wakeup/trigger echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).wakeup_latency($wakeup_lat,next_pid,next_comm) if next_comm=="ping"' > events/sched/sched_switch/trigger echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > events/synthetic/wakeup_latency/trigger -ping localhost -c 5 +ping 127.0.0.1 -c 5 if ! grep -q "ping" events/synthetic/wakeup_latency/hist; then fail "Failed to create onmatch action inter-event histogram" fi
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc +1 -1
@@ -29,7 +29,7 @@ echo "Test histogram variables,simple expression support and onmatch-onmax actio echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_wakeup/trigger echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).wakeup_latency($wakeup_lat,next_pid,next_comm):onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm) if next_comm=="ping"' >> events/sched/sched_switch/trigger echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > events/synthetic/wakeup_latency/trigger -ping localhost -c 5 +ping 127.0.0.1 -c 5 if [ ! grep -q "ping" events/synthetic/wakeup_latency/hist -o ! grep -q "max:" events/sched/sched_switch/hist]; then fail "Failed to create onmatch-onmax action inter-event histogram" fi
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc +1 -1
@@ -27,7 +27,7 @@ echo "Test onmax action" echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' >> events/sched/sched_waking/trigger echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm) if next_comm=="ping"' >> events/sched/sched_switch/trigger -ping localhost -c 3 +ping 127.0.0.1 -c 3 if ! grep -q "max:" events/sched/sched_switch/hist; then fail "Failed to create onmax action inter-event histogram" fi
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 11/25 selftests/ftrace: Improve kprobe on module testcase to load/unload module
In reply to Masami HiramatsuImprove kprobe events on module testcase to check module load/unload with disabled/enabled events. This also change the target module to trace_printk.ko, so it depends on CONFIG_SAMPLE_TRACE_PRINTK=m.
--- tools/testing/selftests/ftrace/config | 4 ++ .../ftrace/test.d/kprobe/kprobe_module.tc | 35 ++++++++++++++++++-- 2 files changed, 36 insertions(+), 3 deletions(-)
tools/testing/selftests/ftrace/config +4 -0
@@ -4,3 +4,7 @@ CONFIG_FUNCTION_PROFILER=y CONFIG_TRACER_SNAPSHOT=y CONFIG_STACK_TRACER=y CONFIG_HIST_TRIGGERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_SAMPLES=y +CONFIG_SAMPLE_TRACE_PRINTK=m
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc +32 -3
@@ -4,11 +4,18 @@ [ -f kprobe_events ] || exit_unsupported # this is configurable +rmmod trace-printk ||: +if ! modprobe trace-printk.ko ; then + echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK= +m" + exit_unresolved; +fi + +MOD=trace_printk +FUNC=trace_printk_irq_work + :;: "Add an event on a module function without specifying event name" ;: -MOD=`lsmod | head -n 2 | tail -n 1 | cut -f1 -d" "` -FUNC=`grep -m 1 ".* t .*\\[$MOD\\]" /proc/kallsyms | xargs | cut -f3 -d" "` -[ "x" != "x$MOD" -a "y" != "y$FUNC" ] || exit_unresolved echo "p $MOD:$FUNC" > kprobe_events PROBE_NAME=`echo $MOD:$FUNC | tr ".:" "_"` test -d events/kprobes/p_${PROBE_NAME}_0 || exit_failure
@@ -22,3 +29,25 @@ test -d events/kprobes/event1 || exit_failure echo "p:kprobes1/event1 $MOD:$FUNC" > kprobe_events test -d events/kprobes1/event1 || exit_failure + +:;: "Remove target module, but event still be there" ;: +if ! rmmod trace-printk ; then + echo "Failed to unload module - please enable CONFIG_MODULE_UNLOAD" + exit_unresolved; +fi +test -d events/kprobes1/event1 + +:;: "Check posibility to defining events on unloaded module";: +echo "p:event2 $MOD:$FUNC" >> kprobe_events + +:;: "Target is gone, but we can prepare for next time";: +echo 1 > events/kprobes1/event1/enable + +:;: "Load module again, which means the event1 should be recorded";: +modprobe trace-printk.ko +grep "event1:" trace + +:;: "Remove the module again and check the event is not locked" +rmmod trace-printk +echo 0 > events/kprobes1/event1/enable +echo "-:kprobes1/event1" >> kprobe_events
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerRe: [PATCH 11/25] selftests/ftrace: Improve kprobe on module testcase to load/unload module
Quoted 5 lines · On Fri, 27 Jul 2018 21:15:08 +0900 Masami Hiramatsu <[email protected]> wrote:
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc +0
-0@@ -4,11 +4,18 @@ [ -f kprobe_events ] || exit_unsupported # this is configurable
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc line 15
Quoted 10 lines
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc +9
-0+rmmod trace-printk ||: +if ! modprobe trace-printk.ko ; then + echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK= +m" + exit_unresolved; +fi + +MOD=trace_printk +FUNC=trace_printk_irq_work
Hmm, this caused a problem with CONFIG_KPROBE_EVENTS_ON_NOTRACE=n. However, as far as I can see, the trace_printk_irq_work() is not marked as notrace...
Anyway, I'll find another better module to test.
Thanks,
Signature · 5 lines
Masami Hiramatsu <mhiramat at kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerRe: [PATCH 11/25] selftests/ftrace: Improve kprobe on module testcase to load/unload module
Quoted 9 lines · On Thu, 2 Aug 2018 10:02:40 +0900 Masami Hiramatsu <[email protected]> wrote:
Quoted 6 lines · On Fri, 27 Jul 2018 21:15:08 +0900 Masami Hiramatsu <[email protected]> wrote:
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc +0
-0@@ -4,11 +4,18 @@ [ -f kprobe_events ] || exit_unsupported # this is configurable
Quoted 13 lines
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc line 15
Quoted 9 lines
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc +9
-0+rmmod trace-printk ||: +if ! modprobe trace-printk.ko ; then + echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK= +m" + exit_unresolved; +fi + +MOD=trace_printk +FUNC=trace_printk_irq_workHmm, this caused a problem with
CONFIG_KPROBE_EVENTS_ON_NOTRACE=n. However, as far as I can see, thetrace_printk_irq_work()is not marked as notrace...
Ah, I found this was caused by my prevent probe on notrace patch. I was a bit too greedy to check out-of-range probes in it. I'll fix that.
Thank you,
Signature · 5 lines
Masami Hiramatsu <mhiramat at kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 12/25 selftests/ftrace: Improve kprobe testcase to check log data
In reply to Masami HiramatsuImprove kprobe testcase to check the log data correctness and ensure the event definition is corrctly including argument definition.
--- .../selftests/ftrace/test.d/kprobe/kprobe_args.tc | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc +5 -1
@@ -5,10 +5,14 @@ [ -f kprobe_events ] || exit_unsupported # this is configurable echo 'p:testprobe _do_fork $stack $stack0 +0($stack)' > kprobe_events -grep testprobe kprobe_events +grep testprobe kprobe_events | grep -q 'arg1=\$stack arg2=\$stack0 arg3=+0(\$stack)' test -d events/kprobes/testprobe + echo 1 > events/kprobes/testprobe/enable ( echo "forked") +grep testprobe trace | grep '_do_fork' | \ + grep -q 'arg1=0x[[:xdigit:]]* arg2=0x[[:xdigit:]]* arg3=0x[[:xdigit:]]*$' + echo 0 > events/kprobes/testprobe/enable echo "-:testprobe" >> kprobe_events clear_trace
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 13/25 selftests/ftrace: Improve kretprobe testcase to check log data
In reply to Masami HiramatsuImprove kretprobe testcase to check the log data correctness and ensure the event definition is corrctly including argument definition.
--- .../ftrace/test.d/kprobe/kretprobe_args.tc | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc +6 -1
@@ -4,11 +4,16 @@ [ -f kprobe_events ] || exit_unsupported # this is configurable +# Add new kretprobe event echo 'r:testprobe2 _do_fork $retval' > kprobe_events -grep testprobe2 kprobe_events +grep testprobe2 kprobe_events | grep -q 'arg1=\$retval' test -d events/kprobes/testprobe2 + echo 1 > events/kprobes/testprobe2/enable ( echo "forked") + +cat trace | grep testprobe2 | grep -q '<- _do_fork' + echo 0 > events/kprobes/testprobe2/enable echo '-:testprobe2' >> kprobe_events clear_trace
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 14/25 selftests/ftrace: Test kprobe-event argument with various bitsize
In reply to Masami HiramatsuImprove the kprobe-event with argument types testcase to test it with various bitsize.
kprobe-event argument can be recorded in given types with various bitsize (8, 16, 32, 64), thus the type testcase should test the different bitsize too.
--- .../ftrace/test.d/kprobe/kprobe_args_type.tc | 48 +++++++++++++------- 1 file changed, 32 insertions(+), 16 deletions(-)
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc +32 -16
@@ -6,29 +6,45 @@ grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue -echo 'p:testprobe _do_fork $stack0:s32 $stack0:u32 $stack0:x32 $stack0:b8 at 4/32' > kprobe_events -grep testprobe kprobe_events -test -d events/kprobes/testprobe - -echo 1 > events/kprobes/testprobe/enable -( echo "forked") -echo 0 > events/kprobes/testprobe/enable -ARGS=`tail -n 1 trace | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'` +gen_event() { # Bitsize + echo "p:testprobe _do_fork \$stack0:s$1 \$stack0:u$1 \$stack0:x$1 \$stack0:b4 at 4/$1" +} -check_types() { - X1=`printf "%x" $1 | tail -c 8` +check_types() { # s-type u-type x-type bf-type width + test $# -eq 5 + CW=$5 + CW=$((CW / 4)) + X1=`printf "%x" $1 | tail -c ${CW}` X2=`printf "%x" $2` X3=`printf "%x" $3` test $X1 = $X2 test $X2 = $X3 test 0x$X3 = $3 - B4=`printf "%02x" $4` - B3=`echo -n $X3 | tail -c 3 | head -c 2` + B4=`printf "%1x" $4` + B3=`printf "%03x" 0x$X3 | tail -c 2 | head -c 1` test $B3 = $B4 } -check_types $ARGS -echo "-:testprobe" >> kprobe_events -clear_trace -test -d events/kprobes/testprobe && exit_fail || exit_pass +for width in 64 32 16 8; do + : "Add new event with basic types" + gen_event $width > kprobe_events + grep testprobe kprobe_events + test -d events/kprobes/testprobe + + : "Trace the event" + echo 1 > events/kprobes/testprobe/enable + ( echo "forked") + echo 0 > events/kprobes/testprobe/enable + + : "Confirm the arguments is recorded in given types correctly" + ARGS=`grep "testprobe" trace | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'` + check_types $ARGS $width + + : "Clear event for next loop" + echo "-:testprobe" >> kprobe_events + clear_trace + +done + +exit_pass
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 15/25 selftests/ftrace: Check set_event_pid result
In reply to Masami HiramatsuEnsure the set_event_pid shows set pid list.
--- .../selftests/ftrace/test.d/event/event-pid.tc | 1 + 1 file changed, 1 insertion(+)
tools/testing/selftests/ftrace/test.d/event/event-pid.tc +1 -0
@@ -46,6 +46,7 @@ do_reset read mypid rest < /proc/self/stat echo $mypid > set_event_pid +grep -q $mypid set_event_pid echo 'sched:sched_switch' > set_event yield
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 16/25 selftests/ftrace: Add kprobe event with $comm argument testcase
In reply to Masami HiramatsuAdd kprobe-event with $comm argument testcase to
ftracetest. This not only checks syntax but
also checks log file.
--- .../ftrace/test.d/kprobe/kprobe_args_comm.tc | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_comm.tc
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_comm.tc new file +17 -0
@@ -0,0 +1,17 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Kprobe event with comm arguments + +[ -f kprobe_events ] || exit_unsupported # this is configurable + +grep -A1 "fetcharg:" README | grep -q "\$comm" || exit_unsupported # this is too old + +echo 'p:testprobe _do_fork comm=$comm ' > kprobe_events +grep testprobe kprobe_events | grep -q 'comm=$comm' +test -d events/kprobes/testprobe + +echo 1 > events/kprobes/testprobe/enable +( echo "forked") +grep testprobe trace | grep -q 'comm=".*"' + +exit 0
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 17/25 selftests/ftrace: Add kprobe profile testcase
In reply to Masami HiramatsuAdd a testcase for testing kprobe_profile interface which provides per-kprobe event hit/misshit counts.
--- .../selftests/ftrace/test.d/kprobe/profile.tc | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/profile.tc
tools/testing/selftests/ftrace/test.d/kprobe/profile.tc new file +15 -0
@@ -0,0 +1,15 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Kprobe dynamic event - adding and removing + +[ -f kprobe_events ] || exit_unsupported # this is configurable + +! grep -q 'myevent' kprobe_profile +echo p:myevent _do_fork > kprobe_events +grep -q 'myevent[[:space:]]*0[[:space:]]*0$' kprobe_profile +echo 1 > events/kprobes/myevent/enable +( echo "forked" ) +grep -q 'myevent[[:space:]]*[[:digit:]]*[[:space:]]*0$' kprobe_profile +echo 0 > events/kprobes/myevent/enable +echo > kprobe_events +! grep -q 'myevent' kprobe_profile
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 18/25 selftests/ftrace: Add a testcase for nop tracer
In reply to Masami HiramatsuAdd a testcase for nop tracer. This tracer has 2 test options, so check it too.
--- .../testing/selftests/ftrace/test.d/tracer/nop.tc | 22 ++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/tracer/nop.tc
tools/testing/selftests/ftrace/test.d/tracer/nop.tc new file +22 -0
@@ -0,0 +1,22 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test nop tracer + +# nop must be supported always +grep -q "nop" available_tracers + +echo "nop" > current_tracer + +# nop provides 2 test options +grep -q "test_nop_accept" trace_options +grep -q "test_nop_refuse" trace_options + +# nop_accept always success +echo "test_nop_accept" > trace_options +echo "notest_nop_accept" > trace_options + +# nop_refuse always failed +! echo "test_nop_refuse" > trace_options +! echo "notest_nop_refuse" > trace_options + +exit 0
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 19/25 selftests/ftrace: Add kprobe-event with symbol argument test
In reply to Masami HiramatsuAdd a testcase for kprobe-event with @symbol argument. Since @symbol needs to refer the kernel data symbol (linux_proc_banner), it requires CONFIG_KALLSYMS_ALL.
--- tools/testing/selftests/ftrace/config | 1 + .../ftrace/test.d/kprobe/kprobe_args_symbol.tc | 39 ++++++++++++++++++++ 2 files changed, 40 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_symbol.tc
tools/testing/selftests/ftrace/config +1 -0
@@ -8,3 +8,4 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_SAMPLES=y CONFIG_SAMPLE_TRACE_PRINTK=m +CONFIG_KALLSYMS_ALL=y
tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_symbol.tc new file +39 -0
@@ -0,0 +1,39 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Kprobe event symbol argument + +[ -f kprobe_events ] || exit_unsupported # this is configurable + +SYMBOL="linux_proc_banner" + +if [ ! -f /proc/kallsyms ]; then + echo "Can not check the target symbol - please enable CONFIG_KALLSYMS" + exit_unresolved +elif ! grep "$SYMBOL\$" /proc/kallsyms; then + echo "Linux banner is not exported - please enable CONFIG_KALLSYMS_ALL" + exit_unresolved +fi + +: "Test get basic types symbol argument" +echo "p:testprobe_u _do_fork arg1=@linux_proc_banner:u64 arg2=@linux_proc_banner:u32 arg3=@linux_proc_banner:u16 arg4=@linux_proc_banner:u8" > kprobe_events +echo "p:testprobe_s _do_fork arg1=@linux_proc_banner:s64 arg2=@linux_proc_banner:s32 arg3=@linux_proc_banner:s16 arg4=@linux_proc_banner:s8" >> kprobe_events +if grep -q "x8/16/32/64" README; then + echo "p:testprobe_x _do_fork arg1=@linux_proc_banner:x64 arg2=@linux_proc_banner:x32 arg3=@linux_proc_banner:x16 arg4=@linux_proc_banner:x8" >> kprobe_events +fi +echo "p:testprobe_bf _do_fork arg1=@linux_proc_banner:b8 at 4/32" >> kprobe_events +echo 1 > events/kprobes/enable +(echo "forked") +echo 0 > events/kprobes/enable +grep "testprobe_[usx]:.* arg1=.* arg2=.* arg3=.* arg4=.*" trace +grep "testprobe_bf:.* arg1=.*" trace + +: "Test get string symbol argument" +echo "p:testprobe_str _do_fork arg1=@linux_proc_banner:string" > kprobe_events +echo 1 > events/kprobes/enable +(echo "forked") +echo 0 > events/kprobes/enable +RESULT=`grep "testprobe_str" trace | sed -e 's/.* arg1=\(.*\)/\1/'` + +RESULT=`echo $RESULT | sed -e 's/.* \((.*)\) \((.*)\) .*/\1 \2/'` +ORIG=`cat /proc/version | sed -e 's/.* \((.*)\) \((.*)\) .*/\1 \2/'` +test "$RESULT" = "$ORIG"
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 20/25 selftests/ftrace: Add trace_printk sample module test
In reply to Masami HiramatsuAdd trace_printk sample module test. This requires to enable trace_printk.ko module for test.
--- .../selftests/ftrace/test.d/event/trace_printk.tc | 27 ++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/event/trace_printk.tc
tools/testing/selftests/ftrace/test.d/event/trace_printk.tc new file +27 -0
@@ -0,0 +1,27 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace_printk from module + +rmmod trace-printk ||: +if ! modprobe trace-printk.ko ; then + echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK=m" + exit_unresolved; +fi + +echo "Waiting for irq work" +sleep 1 + +grep -q ": This .* trace_bputs" trace +grep -q ": This .* trace_puts" trace +grep -q ": This .* trace_bprintk" trace +grep -q ": This .* trace_printk" trace + +grep -q ": (irq) .* trace_bputs" trace +grep -q ": (irq) .* trace_puts" trace +grep -q ": (irq) .* trace_bprintk" trace +grep -q ": (irq) .* trace_printk" trace + +grep -q "This is a %s that will use trace_bprintk" printk_formats +grep -q "(irq) This is a static string that will use trace_bputs" printk_formats + +rmmod trace-printk ||:
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 21/25 selftests/ftrace: Add ringbuffer size changing testcase
In reply to Masami HiramatsuAdd a testcase for changing ringbuffer size. This tests not only ringbuffer size but also tests the imbalance per-cpu buffer size change too.
--- .../ftrace/test.d/00basic/ringbuffer_size.tc | 21 ++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_size.tc
tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_size.tc new file +21 -0
@@ -0,0 +1,21 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Change the ringbuffer size + +rb_size_test() { +ORIG=`cat buffer_size_kb` + +expr $ORIG / 2 > buffer_size_kb + +expr $ORIG \* 2 > buffer_size_kb + +echo $ORIG > buffer_size_kb +} + +rb_size_test + +: "If per-cpu buffer is supported, imbalance it" +if [ -d per_cpu/cpu0 ]; then + cd per_cpu/cpu0 + rb_size_test +fi
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 22/25 selftests/ftrace: Add function profiling stat testcase
In reply to Masami HiramatsuAdd a testcase for function profiling per-cpu statistics interface. There is already func_profile.tc, but that is mainly focusing on the combination of function-profiler and function tracer. This testcase ensures trace_stat per-cpu function statistics is correctly updated.
--- .../ftrace/test.d/ftrace/func_profile_stat.tc | 23 ++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_profile_stat.tc
tools/testing/selftests/ftrace/test.d/ftrace/func_profile_stat.tc new file +23 -0
@@ -0,0 +1,23 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: ftrace - function profiling + +[ ! -f function_profile_enabled ] && exit_unsupported + +: "Enable function profile" +echo 1 > function_profile_enabled + +: "Profile must be updated" +cp trace_stat/function0 $TMPDIR/ +( echo "forked"; sleep 1 ) +: "diff returns 0 if there is no difference" +! diff trace_stat/function0 $TMPDIR/function0 + +echo 0 > function_profile_enabled + +: "Profile must NOT be updated" +cp trace_stat/function0 $TMPDIR/ +( echo "forked"; sleep 1 ) +: "diff returns 0 if there is no difference" +diff trace_stat/function0 $TMPDIR/function0 +
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 23/25 selftests/ftrace: Add max stack tracer testcase
In reply to Masami HiramatsuAdd a testcase for max stack tracer, which checks basic max stack usage tracing and its filter feature.
--- .../ftrace/test.d/ftrace/func_stack_tracer.tc | 39 ++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc
tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc new file +39 -0
@@ -0,0 +1,39 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: ftrace - Max stack tracer +# Test the basic function of max-stack usage tracing + +if [ ! -f stack_trace ]; then + echo "Max stack tracer is not supported - please make CONFIG_STACK_TRACER=y" + exit_unsupported +fi + +echo > stack_trace_filter +echo 0 > stack_max_size +echo 1 > /proc/sys/kernel/stack_tracer_enabled + +: "Fork and wait for the first entry become !lock" +timeout=10 +while [ $timeout -ne 0 ]; do + ( echo "forked" ) + FL=`grep " 0)" stack_trace` + echo $FL | grep -q "lock" || break; + timeout=$((timeout - 1)) +done +echo 0 > /proc/sys/kernel/stack_tracer_enabled + +echo '*lock*' > stack_trace_filter +test `cat stack_trace_filter | wc -l` -eq `grep lock stack_trace_filter | wc -l` + +echo 0 > stack_max_size +echo 1 > /proc/sys/kernel/stack_tracer_enabled + +: "Fork and always the first entry including lock" +timeout=10 +while [ $timeout -ne 0 ]; do + ( echo "forked" ) + FL=`grep " 0)" stack_trace` + echo $FL | grep -q "lock" + timeout=$((timeout - 1)) +done +echo 0 > /proc/sys/kernel/stack_tracer_enabled
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerRe: [PATCH 23/25] selftests/ftrace: Add max stack tracer testcase
Quoted 3 lines · On Fri, 27 Jul 2018 21:20:47 +0900 Masami Hiramatsu <mhiramat at kernel.org>…
Add a testcase for max stack tracer, which checks basic max stack usage tracing and its filter feature.
Hmm, this test sometimes fails. (not always)
Let me check what happens.
Thank you,
Quoted 52 lines
Signed-off-by Masami Hiramatsu <mhiramat at kernel.org>--- .../ftrace/test.d/ftrace/func_stack_tracer.tc | 39 ++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tctools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc new file +39
-0@@ -0,0 +1,39 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: ftrace - Max stack tracer +# Test the basic function of max-stack usage tracing + +if [ ! -f stack_trace ]; then + echo "Max stack tracer is not supported - please make CONFIG_STACK_TRACER=y" + exit_unsupported +fi + +echo > stack_trace_filter +echo 0 > stack_max_size +echo 1 > /proc/sys/kernel/stack_tracer_enabled + +: "Fork and wait for the first entry become !lock" +timeout=10 +while [ $timeout -ne 0 ]; do + ( echo "forked" ) + FL=`grep " 0)" stack_trace` + echo $FL | grep -q "lock" || break; + timeout=$((timeout - 1)) +done +echo 0 > /proc/sys/kernel/stack_tracer_enabled + +echo '*lock*' > stack_trace_filter +test `cat stack_trace_filter | wc -l` -eq `grep lock stack_trace_filter | wc -l` + +echo 0 > stack_max_size +echo 1 > /proc/sys/kernel/stack_tracer_enabled + +: "Fork and always the first entry including lock" +timeout=10 +while [ $timeout -ne 0 ]; do + ( echo "forked" ) + FL=`grep " 0)" stack_trace` + echo $FL | grep -q "lock" + timeout=$((timeout - 1)) +done +echo 0 > /proc/sys/kernel/stack_tracer_enabled
Signature · 5 lines
Masami Hiramatsu <mhiramat at kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 24/25 selftests/ftrace: Add function filter on module testcase
In reply to Masami HiramatsuAdd a testcase for function filter on module.
--- .../ftrace/test.d/ftrace/func_mod_trace.tc | 24 ++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_mod_trace.tc
tools/testing/selftests/ftrace/test.d/ftrace/func_mod_trace.tc new file +24 -0
@@ -0,0 +1,24 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: ftrace - function trace on module + +[ ! -f set_ftrace_filter ] && exit_unsupported + +: "mod: allows to filter a non exist function" +echo 'non_exist_func:mod:non_exist_module' > set_ftrace_filter +grep -q "non_exist_func" set_ftrace_filter + +: "mod: on exist module" +echo '*:mod:trace_printk' > set_ftrace_filter +if ! modprobe trace-printk.ko ; then + echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK= +m" + exit_unresolved; +fi + +: "Wildcard should be resolved after loading module" +grep -q "trace_printk_irq_work" set_ftrace_filter + +: "After removing the filter becomes empty" +rmmod trace_printk +test `cat set_ftrace_filter | wc -l` -eq 0
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Masami Hiramatsu
maintainerPATCH 25/25 selftests/ftrace: Add trace_pipe testcase
In reply to Masami HiramatsuAdd a simple testcase for trace_pipe which can consume ringbuffer.
--- .../selftests/ftrace/test.d/00basic/trace_pipe.tc | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/00basic/trace_pipe.tc
tools/testing/selftests/ftrace/test.d/00basic/trace_pipe.tc new file +15 -0
@@ -0,0 +1,15 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: trace_pipe and trace_marker + +[ ! -f trace_marker ] && exit_unsupported + +echo "test input 1" > trace_marker + +: "trace interface never consume the ring buffer" +grep -q "test input 1" trace +grep -q "test input 1" trace + +: "trace interface never consume the ring buffer" +head -n 1 trace_pipe | grep -q "test input 1" +! grep -q "test input 1" trace
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html