Problem mountin rootfs via NFS
Hi all,
in the meantime, I get up my toolchain and an linux-kernel from xilinx git-repository.
Hardware is an FX12 Mini-Module form AVNET, standard design with LL-TEMAC, EDK 9.2.
Kernel boots fine till he try to mount his rootfs via NFS. NFS is working correctly, probed with some other maschines. Some times kernel can mount NFS, somtimes kernel panics trying this.
I already try some additional parameters found here on the list like "tcp,no_lock" but didn't help. Also probed direct connection, connection via a 100 MBit switch. No success.
Another thing I tried is set ip=dhcp, the device find our DHCP-Server and gets an address. So I think network should ok, but where comes the NFS trouble from?
Best Regards,
Ingo Maindorfer
The boot messages from console:
loaded at: 00400000 0052E19C board data at: 0052C120 0052C19C relocated to: 0040409C 00404118 zimage at: 00404F13 0052BDE3 avail ram: 0052F000 02000000
Linux/PPC load: console=ttyUL0,19200 ip=10.82.2.234:10.82.2.103:10.82.2.4:255.255.255.0 nfsroot=10.82.2.103:/tftpboot
Uncompressing Linux...done.
Now booting the kernel
Linux version 2.6.24-rc8-xlnx-g8a6d0b1a-dirty (ingo@messstrecke) (gcc version 3.4.5) #24 PREEMPT Fri Feb 8 14:21:06 CET 2008 Xilinx Generic PowerPC board support package (Xilinx ML40 Zone PFN ranges:ilinx_lltemac.0:
DMA 0 -> 8192 Normal 8192 -> 8192lTemac: Dma base address: phy: HighMem 8192 -> 81927c
Movable zone start PFN for each node
et
XLlTemac: buffer descriptor s
early_node_map[1] active PFN ranges_table+0x64/0xe44 (order: 0, 40
0: 0 -> 8192
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 with kmalloc<6>XLlTemac: (buffer_descriptor
Kernel command line: console=ttyUL0,19200 ip=10.82.2.234:10.82.2.103:10.82.2.4:255.255.255.0 nfsroot=10.82.2.103:/tftpboot_init) phy: 0x1c98000, virt: 0xc1c98000, size: 0x8000
TCP estab
Xilinx INTC #0 at 0x81800000 mapped to 0xFDFFF000
XTemac: PHY detected at address 4.
PID hash table entries: 128 (order: 7, 512 bytes)
eth0: Dropping NETIF_F_SG sin
Memory: 29820k available (1940k kernel code, 600k data, 104k init, 0k highmem)
eth0: XLlTemac: allocating interrupt 1 f
SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1LlTemac:
eth0: XLlTemac: Not able to set the speed to 1000 (st Mount-cache hash table entries: 512net_namespace: 64 bytesLlTemac: We renegotiate
NET: Registered protocol family 16
Registering device uartlite:0ltemac.0: eth0:
Registering device xilinx_lltemac:0mac: speed set to 100Mb/s 0xC3Send
NET: Registered protocol family 2
TCP reno registeredmac: allocating int
sysctl table check failed: /kernel/l2cr .1.31 Missing strategy4k init
eth0: XLlTemac:
Call Trace:o [c1c0fe60] [c0008e68] show_stack+0x40/0x194 (unreliable)sole.
IP-Con
[c1c0fe90] [c0036414] set_fail+0x68/0x80nk carrier restored. [c1c0feb0] [c0036a2c] sysctl_check_table+0x600/0x77c -- Entering main() --ask=255.255.255.0, gw [c1c0fef0] [c0036a14] sysctl_c
[c1c0fff0] [c0004e78] kernel_thread+0x44/0x60ver=1
Installing knfsd (copyright (C) 1996 [email protected]).rnel memory: 104k i io scheduler noop registeredLinux/PPC load: console=ttyU
io scheduler cfq registered (default).82.2.4:255.25e to open an initial co uartlite.0: ttyUL0 at MMIO 0x84000003 (irq = 3) is a uartlite Lookin
console [ttyUL0] enabled82.2.75:/tftpboot82.
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
DMA 0 -> 819210.82.2
Built 1
XLlTemac: Allocating DMA descriptors with kmalloc<6>XLlTemac:
(buffer_descriptor_init) phy: 0x1c90000, virt: 0xc1c90000, size: 0x800 55.255.255.0 nfsroot=10.82.2.75:/tftpboot###################### 0
XTemac: PHY detected at address 4. #0 at 0x81800000 mapped to 0xFDFF
eth0: Dropping NETIF_F_SG since no checksum feature.
PIDxilinx_lltemac xilinx_lltemac.0: eth0: Xilinx TEMAC a
RPC: Registered udp transport module.AC
RPC: Registered tcp transport module.s: 2048 (order: 1, 8192 bytes)8192
eth0: XLlTemac: allocating interrupt 0 for dma mode tx.
eth0: XLlTemac: allocating interrupt 1 for dma mode rx.
eth0: XLlTemac: We renegotiated the speed to: 1000
eth0: XLlTemac: speed set to 1000Mb/s
eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4
eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254
IP-Config: Complete:
device=eth0, addr=10.82.2.234, mask=255.255.255.0, gw=10.82.2.4,
host=10.82.2.234, domain=, nis-domain=(none),
bootserver=10.82.2.103, rootserver=10.82.2.103, rootpath=Looking up port of RPC 100003/2 on 10.82.2.103 Looking up port of RPC 100005/1 on 10.82.2.103
VFS: Mounted root (nfs filesystem) readonly. Freeing unused kernel memory: 104k init
Warning: unable to open an initial console.
nfs: server 10.82.2.103 not responding, still trying
nfs: server 10.82.2.103 OK
nfs: server 10.82.2.103 not responding, still trying
nfs: server 10.82.2.103 not responding, still trying
nfs: server 10.82.2.103 OK
nfs: server 10.82.2.103 not responding, still trying
nfs: server 10.82.2.103 OK
nfs: server 10.82.2.103 OK
wireshark spite out this (.103 NFS-Server, .234 Xilinx):
"22","7.482314000","10.82.2.234","10.82.2.103","NFS","V2 READ Call (Reply In 25), FH:0xb29d0d7b Offset:16384 Count:4096 TotalCount:4096" "23","7.482411000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=0) [Reassembled in #25]" "24","7.482416000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=1480) [Reassembled in #25]" "25","7.482418000","10.82.2.103","10.82.2.234","NFS","V2 READ Reply (Call In 22)"
"26","8.581527000","10.82.2.234","10.82.2.103","NFS","V2 READ Call (Reply In 29), FH:0xb29d0d7b Offset:8192 Count:4096 TotalCount:4096" "27","8.581608000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=0) [Reassembled in #29]" "28","8.581612000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=1480) [Reassembled in #29]" "29","8.581615000","10.82.2.103","10.82.2.234","NFS","V2 READ Reply (Call In 26)"
"30","8.585120000","10.82.2.234","10.82.2.103","NFS","V2 READ Call (Reply In 33), FH:0xb29d0d7b Offset:12288 Count:4096 TotalCount:4096" "31","8.585160000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=0) [Reassembled in #33]" "32","8.585164000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=1480) [Reassembled in #33]" "33","8.585166000","10.82.2.103","10.82.2.234","NFS","V2 READ Reply (Call In 30)"
"34","8.593065000","10.82.2.234","10.82.2.103","NFS","[RPC retransmission of #22]V2 READ Call (Reply In 25), FH:0xb29d0d7b Offset:16384 Count:4096 TotalCount:4096" "35","8.593109000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=0) [Reassembled in #37]" "36","8.593113000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=1480) [Reassembled in #37]" "37","8.593115000","10.82.2.103","10.82.2.234","NFS","[RPC duplicate of #25]V2 READ Reply (Call In 22)" "38","8.607327000","10.82.2.234","10.82.2.103","NFS","V2 READ Call (Reply In 39), FH:0xb29d0d7b Offset:20480 Count:896 TotalCount:896" "39","8.607363000","10.82.2.103","10.82.2.234","NFS","V2 READ Reply (Call In 38)"
"54","10.807186000","10.82.2.234","10.82.2.103","NFS","[RPC retransmission of #38]V2 READ Call (Reply In 39), FH:0xb29d0d7b Offset:20480 Count:896 TotalCount:896" "55","10.807248000","10.82.2.103","10.82.2.234","NFS","[RPC duplicate of #39]V2 READ Reply (Call In 38)" "60","13.012339000","10.82.2.234","10.82.2.103","NFS","[RPC retransmission of #22]V2 READ Call (Reply In 25), FH:0xb29d0d7b Offset:16384 Count:4096 TotalCount:4096" "61","13.012483000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=0) [Reassembled in #63]" "62","13.012489000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=1480) [Reassembled in #63]" "63","13.012492000","10.82.2.103","10.82.2.234","NFS","[RPC duplicate of #25]V2 READ Reply (Call In 22)" "65","14.111614000","10.82.2.234","10.82.2.103","NFS","[RPC retransmission of #22]V2 READ Call (Reply In 25), FH:0xb29d0d7b Offset:16384 Count:4096 TotalCount:4096" "66","14.111699000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=0) [Reassembled in #68]" "67","14.111705000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=1480) [Reassembled in #68]" "68","14.111707000","10.82.2.103","10.82.2.234","NFS","[RPC duplicate of #25]V2 READ Reply (Call In 22)" "71","16.311259000","10.82.2.234","10.82.2.103","NFS","[RPC retransmission of #22]V2 READ Call (Reply In 25), FH:0xb29d0d7b Offset:16384 Count:4096 TotalCount:4096" "72","16.311360000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=0) [Reassembled in #74]" "73","16.311366000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=1480) [Reassembled in #74]" "74","16.311368000","10.82.2.103","10.82.2.234","NFS","[RPC duplicate of #25]V2 READ Reply (Call In 22)" "75","16.322672000","10.82.2.234","10.82.2.103","NFS","V2 GETATTR Call (Reply In 76), FH:0x00bdec42" "76","16.322705000","10.82.2.103","10.82.2.234","NFS","V2 GETATTR Reply (Call In 75)" "77","16.326131000","10.82.2.234","10.82.2.103","NFS","V2 LOOKUP Call (Reply In 78), DH:0x529ded7b/libc.so.6" "78","16.326167000","10.82.2.103","10.82.2.234","NFS","V2 LOOKUP Reply (Call In 77), FH:0x569de97b" "79","16.329608000","10.82.2.234","10.82.2.103","NFS","V2 READLINK Call (Reply In 80), FH:0x569de97b" "80","16.329654000","10.82.2.103","10.82.2.234","NFS","V2 READLINK Reply (Call In 79) Path:libc-2.3.6.so" "81","16.332969000","10.82.2.234","10.82.2.103","NFS","V2 LOOKUP Call (Reply In 82), DH:0x529ded7b/libc-2.3.6.so" "82","16.332993000","10.82.2.103","10.82.2.234","NFS","V2 LOOKUP Reply (Call In 81), FH:0x529ded7b" "83","16.336586000","10.82.2.234","10.82.2.103","NFS","V2 READ Call (Reply In 86), FH:0x529ded7b Offset:0 Count:4096 TotalCount:4096" "84","16.336620000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=0) [Reassembled in #86]" "85","16.336625000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=1480) [Reassembled in #86]" "86","16.336627000","10.82.2.103","10.82.2.234","NFS","V2 READ Reply (Call In 83)" "87","16.336815000","10.82.2.234","10.82.2.103","NFS","V2 READ Call (Reply In 90), FH:0x529ded7b Offset:4096 Count:4096 TotalCount:4096" "88","16.336845000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=0) [Reassembled in #90]" "89","16.336850000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=1480) [Reassembled in #90]" "90","16.336852000","10.82.2.103","10.82.2.234","NFS","V2 READ Reply (Call In 87)" "168","31.034419000","10.82.2.234","10.82.2.103","NFS","[RPC retransmission of #83]V2 READ Call (Reply In 86), FH:0x529ded7b Offset:0 Count:4096 TotalCount:4096" "169","31.034530000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=0) [Reassembled in #171]" "170","31.034535000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=1480) [Reassembled in #171]" "171","31.034537000","10.82.2.103","10.82.2.234","NFS","[RPC duplicate of #86]V2 READ Reply (Call In 83)" "193","32.133681000","10.82.2.234","10.82.2.103","NFS","[RPC retransmission of #87]V2 READ Call (Reply In 90), FH:0x529ded7b Offset:4096 Count:4096 TotalCount:4096" "194","32.133823000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=0) [Reassembled in #196]" "195","32.133828000","10.82.2.103","10.82.2.234","IP","Fragmented IP protocol (proto=UDP 0x11, off=1480) [Reassembled in #196]"
Signature · 2 lines
View this message in context: http://www.nabble.com/-Virtex-4-PPC--Problem-mountin-rootfs-via-NFS-tp15355858p15355858.html Sent from the linuxppc-embedded mailing list archive at Nabble.com.
in the meantime, I get up my toolchain and an linux-kernel from xilinx git-repository.
Hardware is an FX12 Mini-Module form AVNET, standard design with LL-TEMAC, EDK 9.2.
Kernel boots fine till he try to mount his rootfs via NFS. NFS is working correctly, probed with some other maschines. Some times kernel can mount NFS, somtimes kernel panics trying this.
I already try some additional parameters found here on the list like "tcp,no_lock" but didn't help. Also probed direct connection, connection via a 100 MBit switch. No success.
Another thing I tried is set ip=3Ddhcp, the device find our DHCP-Server and gets an address. So I think network should ok, but where comes the NFS trouble from?
=20
Do you have a 'console' device file set up in your NFS rootfilesystem?=20
Thanks
--
Rupesh Sugathan
Dear Rupesh,
Quoted 8 lines · Rupesh
<snip>
Do you have a 'console' device file set up in your NFS rootfilesystem?
no, I don't think so. When I'm back in office Monday morning I'll looking into detail for you.
But the error seems to be some low-level network issue: sometimes kernel can mount NFS, sometimes not and so on.
Best Regards,
Ingo
Signature · 2 lines
View this message in context: http://www.nabble.com/-Virtex-4-PPC--Problem-mountin-rootfs-via-NFS-tp15355858p15361890.html Sent from the linuxppc-embedded mailing list archive at Nabble.com.
Hi,
Quoted 9 lines · Rupesh
<snip>
Do you have a 'console' device file set up in your NFS rootfilesystem?
Thanks
--
Rupesh Sugathan
you are right.
I'm adding the device and can login via console.
But some trouble is left:
connected the board via a swich to the PC I loss packets, connectet directly there are no packets lost.
Any hints?
Best Regards,
Ingo
Signature · 2 lines
View this message in context: http://www.nabble.com/-Virtex-4-PPC--Problem-mountin-rootfs-via-NFS-tp15355858p15434487.html Sent from the linuxppc-embedded mailing list archive at Nabble.com.