DEVELOPERS: Fix file order list maintained by me
PATCH 1/4 DEVELOPERS: Fix file order list maintained by me
Files list maintained by me in DEVELOPERS file is not in proper order, fix it with ascending order.
--- DEVELOPERS | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
DEVELOPERS +8 -8
@@ -901,9 +901,6 @@ F: board/amarula/ F: board/asus/ F: board/bananapi/ F: board/engicam/ -F: configs/amarula_a64_relic_defconfig -F: configs/amarula_vyasa_rk3288_defconfig -F: configs/asus_tinker_rk3288_defconfig F: board/friendlyarm/nanopi-a64/ F: board/friendlyarm/nanopi-neo2/ F: board/olimex/a64-olinuxino/
@@ -912,8 +909,16 @@ F: board/orangepi/orangepi-prime/ F: board/orangepi/orangepi-win/ F: board/orangepi/orangepi-zero-plus2/ F: board/pine64/ +F: configs/amarula_a64_relic_defconfig +F: configs/amarula_vyasa_rk3288_defconfig +F: configs/asus_tinker_rk3288_defconfig F: configs/bananapi_m1_defconfig F: configs/bananapi_m64_defconfig +F: configs/engicam_imx6qdl_icore_defconfig +F: configs/engicam_imx6qdl_icore_qt5_defconfig +F: configs/engicam_imx6qdl_icore_rqs_defconfig +F: configs/engicam_imx6ul_geam_defconfig +F: configs/engicam_imx6ul_isiot_defconfig F: configs/friendlyarm_nanopi_a64_defconfig F: configs/friendlyarm_nanopi_neo2_defconfig F: configs/olimex_a64_olinuxino_defconfig
@@ -923,11 +928,6 @@ F: configs/orangepi_win_defconfig F: configs/orangepi_zero_plus2_defconfig F: configs/pine64_defconfig F: configs/pine64_sopine_defconfig -F: configs/engicam_imx6qdl_icore_defconfig -F: configs/engicam_imx6qdl_icore_qt5_defconfig -F: configs/engicam_imx6qdl_icore_rqs_defconfig -F: configs/engicam_imx6ul_geam_defconfig -F: configs/engicam_imx6ul_isiot_defconfig N: James Knight <[email protected]> F: package/atkmm/
Signature · 1 line
1.9.1
PATCH 2/4 board: orangepi: Add Orangepi One Plus support
Add initial support for Orangepi One Plus board
with below features:
- U-Boot 2018.07
- Linux 4.18.0-rc3
- Default packages from buildroot
--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/orangepi/orangepi-one-plus/extlinux.conf | 4 +++ board/orangepi/orangepi-one-plus/genimage.cfg | 33 +++++++++++++++++++ board/orangepi/orangepi-one-plus/post-build.sh | 4 +++ board/orangepi/orangepi-one-plus/readme.txt | 37 ++++++++++++++++++++++ configs/orangepi_one_plus_defconfig | 44 ++++++++++++++++++++++++++ 7 files changed, 125 insertions(+) create mode 100644 board/orangepi/orangepi-one-plus/extlinux.conf create mode 100644 board/orangepi/orangepi-one-plus/genimage.cfg create mode 100755 board/orangepi/orangepi-one-plus/post-build.sh create mode 100644 board/orangepi/orangepi-one-plus/readme.txt create mode 100644 configs/orangepi_one_plus_defconfig
.gitlab-ci.yml +1 -0
@@ -180,6 +180,7 @@ olimex_imx233_olinuxino_defconfig: *defconfig openblocks_a6_defconfig: *defconfig orangepi_lite_defconfig: *defconfig orangepi_one_defconfig: *defconfig +orangepi_one_plus_defconfig: *defconfig orangepi_pc2_defconfig: *defconfig orangepi_pc_defconfig: *defconfig orangepi_pc_plus_defconfig: *defconfig
DEVELOPERS +2 -0
@@ -904,6 +904,7 @@ F: board/engicam/ F: board/friendlyarm/nanopi-a64/ F: board/friendlyarm/nanopi-neo2/ F: board/olimex/a64-olinuxino/ +F: board/orangepi/orangepi-one-plus F: board/orangepi/orangepi-pc2/ F: board/orangepi/orangepi-prime/ F: board/orangepi/orangepi-win/
@@ -922,6 +923,7 @@ F: configs/engicam_imx6ul_isiot_defconfig F: configs/friendlyarm_nanopi_a64_defconfig F: configs/friendlyarm_nanopi_neo2_defconfig F: configs/olimex_a64_olinuxino_defconfig +F: configs/orangepi_one_plus_defconfig F: configs/orangepi_pc2_defconfig F: configs/orangepi_prime_defconfig F: configs/orangepi_win_defconfig
board/orangepi/orangepi-one-plus/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label linux-4.18.0-rc3 + kernel /Image + devicetree /sun50i-h6-orangepi-one-plus.dtb + append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
board/orangepi/orangepi-one-plus/genimage.cfg new file +33 -0
@@ -0,0 +1,33 @@ +image boot.vfat { + vfat { + files = { + "Image", + "sun50i-h6-orangepi-one-plus.dtb", + "extlinux" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + size = 1040384 # 1MB - 8192 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/orangepi/orangepi-one-plus/post-build.sh new file +4 -0
@@ -0,0 +1,4 @@ +#!/bin/sh +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
board/orangepi/orangepi-one-plus/readme.txt new file +37 -0
@@ -0,0 +1,37 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the Orangepi One Plus. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Orangepi One Plus link: +http://www.orangepi.org/OrangePiOneplus/ + +Wiki link: +https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+One+Plus + +This configuration uses U-Boot mainline and kernel mainline. + +How to build +============ + + $ make orangepi_one_plus_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sudo sync + +Insert the micro SDcard in your Orangepi One Plus and power it up. The console +is on the serial line, 115200 8N1.
configs/orangepi_one_plus_defconfig new file +44 -0
44 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH 3/4 configs: bpi-m64: Use Mainline ARM ATF
In reply to Jagan TekiUse Mainline ARM ATF for bananapi-m64 board instead Andre's github.
--- configs/bananapi_m64_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
configs/bananapi_m64_defconfig +3 -3
@@ -8,9 +8,9 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y # Firmware BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git" -BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1" -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_a64" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="cffb00342897ed73a2bb9fc7a1860102bd927f2e" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y # Bootloader
Signature · 1 line
1.9.1
PATCH 3/4 configs: bpi-m64: Use Mainline ARM ATF
Hi,
Quoted 2 lines · Jagan Teki
Use Mainline ARM ATF for bananapi-m64 board instead Andre's github.
Have you tested it? The mainline ATF is not feature-complete yet, so in comparison to the old port you are missing the PMIC setup. This breaks power off and, more importantly, Ethernet support in U-Boot. I have some code to introduce proper (even better) PMIC support, just didn't come around to clean it up and post it.
Meanwhile I would suggest to stick to the old port - actually this was the reason I didn't advertise this more widely yet.
Cheers,
Andre.
Quoted 25 lines
Cc Andre Przywara <[email protected]>Signed-off-by Jagan Teki <[email protected]>--- configs/bananapi_m64_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)configs/bananapi_m64_defconfig +3
-3@@ -8,9 +8,9 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y # Firmware BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git" -BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1" -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_a64" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="cffb00342897ed73a2bb9fc7a1860102bd927f2e" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y # Bootloader
PATCH 3/4 configs: bpi-m64: Use Mainline ARM ATF
Quoted 6 lines · Andre Przywara
Hi,
Quoted 2 lines · Jagan Teki
Use Mainline ARM ATF for bananapi-m64 board instead Andre's github.
Quoted 7 lines
Have you tested it? The mainline ATF is not feature-complete yet, so in comparison to the old port you are missing the PMIC setup. This breaks power off and, more importantly, Ethernet support in U-Boot. I have some code to introduce proper (even better) PMIC support, just didn't come around to clean it up and post it.
Meanwhile I would suggest to stick to the old port - actually this was the reason I didn't advertise this more widely yet.
I did the basic sanity, look fine. but anyway will drop based on your inputs.
Jagan.
PATCH 3/4 configs: bpi-m64: Use Mainline ARM ATF
In reply to Andre PrzywaraHello,
Quoted 6 lines · Andre Przywara
Hi,
Quoted 2 lines · Jagan Teki
Use Mainline ARM ATF for bananapi-m64 board instead Andre's github.
Quoted 7 lines
Have you tested it? The mainline ATF is not feature-complete yet, so in comparison to the old port you are missing the PMIC setup. This breaks power off and, more importantly, Ethernet support in U-Boot. I have some code to introduce proper (even better) PMIC support, just didn't come around to clean it up and post it.
Meanwhile I would suggest to stick to the old port - actually this was the reason I didn't advertise this more widely yet.
So I guess this comment also applied to the Orangepi One Plus patch (PATCH 2/4) in this series, since it also uses mainline ATF:
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="cffb00342897ed73a2bb9fc7a1860102bd927f2e" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
I've marked patches 2 to 4 in this series as Changes Requested.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 4/4 configs: bpi-m64: bump linux, uboot
In reply to Jagan Teki- Uboot to 2017.15
- Linux to 4.17
--- configs/bananapi_m64_defconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
configs/bananapi_m64_defconfig +4 -4
@@ -2,8 +2,8 @@ BR2_aarch64=y BR2_cortex_a53=y BR2_ARM_FPU_VFPV4=y -# Linux headers same as kernel, a 4.14 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y +# Linux headers same as kernel, a 4.17 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y # Firmware BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
@@ -17,7 +17,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.15" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="bananapi_m64" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
@@ -31,7 +31,7 @@ BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/bananapi/bananapi-m64/boot.cmd" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.17" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-bananapi-m64"
Signature · 1 line
1.9.1
PATCH 4/4 configs: bpi-m64: bump linux, uboot
Hi Jagan,
Quoted 24 lines · Jagan Teki
- Uboot to 2017.15
- Linux to 4.17Signed-off-by Jagan Teki <[email protected]>--- configs/bananapi_m64_defconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)configs/bananapi_m64_defconfig +2
-2@@ -2,8 +2,8 @@ BR2_aarch64=y BR2_cortex_a53=y BR2_ARM_FPU_VFPV4=y -# Linux headers same as kernel, a 4.14 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y +# Linux headers same as kernel, a 4.17 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y # Firmware BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
configs/bananapi_m64_defconfig BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y · line 20
Quoted 5 lines
configs/bananapi_m64_defconfig +1
-1@@ -17,7 +17,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.15"
I don't think version 2017.15 really exists. I tested, just in case, and got a 404.
Also, out of personal taste, I would put the whole defconfig name in the patch subject, to be more grep-friendly:
- [PATCH 4/4] configs: bpi-m64: bump linux, uboot
+ [PATCH 4/4] configs: bananapi_m64: bump linux, uboot
Regards,
Signature · 1 line
Luca
PATCH 4/4 configs: bpi-m64: bump linux, uboot
Hello,
Quoted 2 lines · Luca Ceresoli
- [PATCH 4/4] configs: bpi-m64: bump linux, uboot
+ [PATCH 4/4] configs:bananapi_m64: bump linux, uboot
Nitpicking: I even prefer:
configs/banapi_m64:
which we use more commonly in Buildroot.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 1/4 DEVELOPERS: Fix file order list maintained by me
In reply to Jagan TekiHello Jagan,
Quoted 1 line · Jagan Teki
-F: configs/amarula_a64_relic_defconfig
The support for this board is not merged yet. If you send patches that depend on other patches, you should send them all in a patch series.
But in this case, you should have rather based this patch series on master or next, and not on your branch that contains some unrelated work such as the Amarula A64 Relic board support.
Anyway, I've fixed this up, and applied to master. Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 1/4 DEVELOPERS: Fix file order list maintained by me
Quoted 4 lines · Thomas Petazzoni
Hello Jagan,
On Mon, 3 Sep 2018 10:26:09 +0200, Jagan Teki wrote:
Quoted 8 lines
Quoted 1 line
-F: configs/amarula_a64_relic_defconfig
The support for this board is not merged yet. If you send patches that depend on other patches, you should send them all in a patch series.
But in this case, you should have rather based this patch series on master or next, and not on your branch that contains some unrelated work such as the Amarula A64 Relic board support.
Sorry, I thought this board is mainlined. any further comments on this board?
Quoted 2 lines
Anyway, I've fixed this up, and applied to master. Thanks!
Thanks.
PATCH 1/4 DEVELOPERS: Fix file order list maintained by me
Hello,
Quoted 1 line · Jagan Teki
Sorry, I thought this board is mainlined. any further comments on this board?
Not at this point, it needs to be reviewed, just like the other 260 patches we have in our backlog :-/
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com