Skip to contentSkip to conversation

MIPS: pci-rt2880: set pci controller of_node

PATCH In review Mathias Kresin 3 participants 3 messages Sep 5, 2018 – Sep 6, 2018 MIPS

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 MIPS: pci-rt2880: set pci controller of_node

From: Tobias Wolf <[email protected]>

Set the PCI controller of_node such that PCI devices can be instantiated via device tree.

---
 arch/mips/pci/pci-rt2880.c | 2 ++
 1 file changed, 2 insertions(+)
arch/mips/pci/pci-rt2880.c +2 -0
index 711cdcc..f376a1d 100644
@@ -246,6 +246,8 @@ static int rt288x_pci_probe(struct platform_device *pdev)
 	rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
 	(void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
 
+	rt2880_pci_controller.of_node = pdev->dev.of_node;
+
 	register_pci_controller(&rt2880_pci_controller);
 	return 0;
 }
Signature · 1 line
2.7.4
Acked-by on v1 1/1
#1 lore raw
Quoted 7 lines · Mathias Kresin

From: Tobias Wolf <[email protected]>

Set the PCI controller of_node such that PCI devices can be instantiated via device tree.

Quoted 17 lines
---
  arch/mips/pci/pci-rt2880.c | 2 ++
  1 file changed, 2 insertions(+)
arch/mips/pci/pci-rt2880.c +2 -0
index 711cdcc..f376a1d 100644
@@ -246,6 +246,8 @@ static int rt288x_pci_probe(struct platform_device *pdev)
  	rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
  	(void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
 
+	rt2880_pci_controller.of_node = pdev->dev.of_node;
+
  	register_pci_controller(&rt2880_pci_controller);
  	return 0;
  }