ARM: dts: imx6ul: Enable the PMU node
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/1 ARM: dts: imx6ul: Enable the PMU node
From: Fabio Estevam <[email protected]>
There is no need to keep the PMU disabled.
Enable it like it is done in the other i.MX dtsi files.
With this change applied we see:
[ 1.338866] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
Signed-off-by Fabio Estevam <[email protected]>
--- arch/arm/boot/dts/imx6ul.dtsi | 1 - 1 file changed, 1 deletion(-)
arch/arm/boot/dts/imx6ul.dtsi +0 -1
@@ -156,7 +156,6 @@ compatible = "arm,cortex-a7-pmu"; interrupt-parent = <&gpc>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; }; soc {
Signature · 1 line
2.7.4
Shawn Guo
AppliedPATCH 1/1 ARM: dts: imx6ul: Enable the PMU node
Quoted 11 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
There is no need to keep the PMU disabled.
Enable it like it is done in the other i.MX dtsi files.
With this change applied we see:
[ 1.338866] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters availableSigned-off-by Fabio Estevam <[email protected]>
Applied, thanks.