ARM: dts: at91: sama5d4: add labels to soc dtsi for derivative boards
PATCH 1/1 ARM: dts: at91: sama5d4: add labels to soc dtsi for derivative boards
This adds labels to commonly used device-tree nodes so that derivative boards can avoid ahb/apb hierarchy.
---
Hello,
This was already done for SoC sama5d3 and sam9x5, in commit:
"fc37204432d" ("ARM: dts: at91: add labels to soc dtsi for derivative boards")
This commit will do basically the same thing for sama5d4 SoC.
Based on top of at91-next branch of at91.git
Thanks.
arch/arm/boot/dts/sama5d4.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/sama5d4.dtsi +4 -4
@@ -1323,13 +1323,13 @@ }; }; - rstc at fc068600 { + reset_controller: rstc at fc068600 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfc068600 0x10>; clocks = <&clk32k>; }; - shdwc at fc068610 { + shutdown_controller: shdwc at fc068610 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfc068610 0x10>; clocks = <&clk32k>;
@@ -1342,7 +1342,7 @@ clocks = <&h32ck>; }; - watchdog at fc068640 { + watchdog: watchdog at fc068640 { compatible = "atmel,sama5d4-wdt"; reg = <0xfc068640 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -1376,7 +1376,7 @@ }; - pinctrl at fc06a000 { + pinctrl: pinctrl at fc06a000 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
Signature · 1 line
2.7.4
Hi Eugen,
Quoted 4 lines · Eugen Hristev
This adds labels to commonly used device-tree nodes so that derivative boards can avoid ahb/apb hierarchy.
Signed-off-by Eugen Hristev <[email protected]>
Quoted 8 lines
---
Hello,
This was already done for SoC sama5d3 and sam9x5, in commit:
"fc37204432d" ("ARM: dts: at91: add labels to soc dtsi for derivative boards")This commit will do basically the same thing for sama5d4 SoC.
Even if it's a mimic of what has been done for other SoCs, it could be worth doing it for all peripherals: trng, aes, tdes and sha are still missing a label.
Otherwise
Regards
Ludovic
Quoted 49 lines
Based on top of at91-next branch of at91.git
Thanks.
arch/arm/boot/dts/sama5d4.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)arch/arm/boot/dts/sama5d4.dtsi +4
-4@@ -1323,13 +1323,13 @@ }; }; - rstc at fc068600 { + reset_controller: rstc at fc068600 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfc068600 0x10>; clocks = <&clk32k>; }; - shdwc at fc068610 { + shutdown_controller: shdwc at fc068610 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfc068610 0x10>; clocks = <&clk32k>;@@ -1342,7 +1342,7 @@ clocks = <&h32ck>; }; - watchdog at fc068640 { + watchdog: watchdog at fc068640 { compatible = "atmel,sama5d4-wdt"; reg = <0xfc068640 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;@@ -1376,7 +1376,7 @@ }; - pinctrl at fc06a000 { + pinctrl: pinctrl at fc06a000 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";Signature · 1 line
2.7.4
Alexandre Belloni
AppliedQuoted 11 lines · Eugen Hristev
This adds labels to commonly used device-tree nodes so that derivative boards can avoid ahb/apb hierarchy.
Signed-off-by Eugen Hristev <[email protected]>---
Hello,
This was already done for SoC sama5d3 and sam9x5, in commit:
"fc37204432d" ("ARM: dts: at91: add labels to soc dtsi for derivative boards")
Quoted 9 lines
This commit will do basically the same thing for sama5d4 SoC.
Based on top of at91-next branch of at91.git
Thanks.
arch/arm/boot/dts/sama5d4.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
Applied, thanks.
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com