usb: xhci-mtk: use maximum ESIT payload of endpiont context
Subsystems (4)
PATCH 2/10 usb: xhci-mtk: use maximum ESIT payload of endpiont context
From: Chunfeng Yun <[email protected]>
Make use of maximum ESIT payload of endpoint context to calculate the number of packets to send in each ESIT
Signed-off-by Chunfeng Yun <[email protected]>
Signed-off-by Mathias Nyman <[email protected]>
--- drivers/usb/host/xhci-mtk-sch.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-mtk-sch.c +14 -1
@@ -73,12 +73,17 @@ static void setup_sch_info(struct usb_device *udev,u32 max_burst;u32 mult;u32 esit_pkts; +u32 max_esit_payload; ep_type =CTX_TO_EP_TYPE (le32_to_cpu (ep_ctx->ep_info2)); ep_interval =CTX_TO_EP_INTERVAL (le32_to_cpu (ep_ctx->ep_info)); max_packet_size =MAX_PACKET_DECODED (le32_to_cpu (ep_ctx->ep_info2)); max_burst =CTX_TO_MAX_BURST (le32_to_cpu (ep_ctx->ep_info2)); mult =CTX_TO_EP_MULT (le32_to_cpu (ep_ctx->ep_info)); + max_esit_payload = + (CTX_TO_MAX_ESIT_PAYLOAD_HI ( +le32_to_cpu (ep_ctx->ep_info)) <<16 ) | +CTX_TO_MAX_ESIT_PAYLOAD (le32_to_cpu (ep_ctx->tx_info)); sch_ep->esit =1 << ep_interval; sch_ep->offset =0 ;
@@ -105,7 +110,15 @@ static void setup_sch_info(struct usb_device *udev, }else if (udev->speed ==USB_SPEED_SUPER ) {/* usb3_r1 spec section4.4.7 & 4.4.8 */ sch_ep->cs_count =0 ; - esit_pkts = (mult +1 ) * (max_burst +1 ); +/* +* some device's (d)wBytesPerInterval is set as 0, +* then max_esit_payload is 0, so evaluate esit_pkts from +* mult and burst +*/ + esit_pkts =DIV_ROUND_UP (max_esit_payload, max_packet_size); +if (esit_pkts ==0 ) + esit_pkts = (mult +1 ) * (max_burst +1 ); +if (ep_type ==INT_IN_EP || ep_type ==INT_OUT_EP ) { sch_ep->pkts = esit_pkts; sch_ep->num_budget_microframes =1 ;