Skip to contentSkip to conversation

hwmon: (nct6775) Rename configuration register variables

PATCH New Guenter Roeck 1 participant 13 messages Sep 20, 2018 Hardware monitoring

lore
Share & tools
lore

Guenter Roeck

author maintainer
#0 lore raw

PATCH 1/13 hwmon: (nct6775) Rename configuration register variables

Use variable names from chip datasheets (crXX) instead of regval_XX for configuration register variables. This is shorter and, together with subsequent changes, makes the code easier to read.

No functional change.

---
 drivers/hwmon/nct6775.c | 42 +++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)
drivers/hwmon/nct6775.c +21 -21
index 2a9fc8c9fb9e..7a3a1d59553e 100644
@@ -3497,7 +3497,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		pwm3pin = regval & 0x08;
 	} else {
 		/* NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D */
-		int regval_1b, regval_2a, regval_2f;
+		int cr1b, cr2a, cr2f;
 		bool dsw_en;
 
 		regval = superio_inb(sioreg, 0x1c);
@@ -3520,20 +3520,20 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		case nct6793:
 		case nct6795:
 		case nct6796:
-			regval_1b = superio_inb(sioreg, 0x1b);
-			regval_2a = superio_inb(sioreg, 0x2a);
-			regval_2f = superio_inb(sioreg, 0x2f);
-			dsw_en = regval_2f & BIT(3);
+			cr1b = superio_inb(sioreg, 0x1b);
+			cr2a = superio_inb(sioreg, 0x2a);
+			cr2f = superio_inb(sioreg, 0x2f);
+			dsw_en = cr2f & BIT(3);
 
 			if (!pwm5pin)
 				pwm5pin = regval & BIT(7);
 
 			if (!fan5pin)
-				fan5pin = regval_1b & BIT(5);
+				fan5pin = cr1b & BIT(5);
 
 			superio_select(sioreg, NCT6775_LD_12);
 			if (data->kind != nct6796) {
-				int regval_eb = superio_inb(sioreg, 0xeb);
+				int creb = superio_inb(sioreg, 0xeb);
 
 				if (!dsw_en) {
 					fan6pin = regval & BIT(1);
@@ -3541,33 +3541,33 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 				}
 
 				if (!fan5pin)
-					fan5pin = regval_eb & BIT(5);
+					fan5pin = creb & BIT(5);
 				if (!pwm5pin)
-					pwm5pin = (regval_eb & BIT(4)) &&
-						!(regval_2a & BIT(0));
+					pwm5pin = (creb & BIT(4)) &&
+						!(cr2a & BIT(0));
 				if (!fan6pin)
-					fan6pin = regval_eb & BIT(3);
+					fan6pin = creb & BIT(3);
 				if (!pwm6pin)
-					pwm6pin = regval_eb & BIT(2);
+					pwm6pin = creb & BIT(2);
 			}
 
 			if (data->kind == nct6795 || data->kind == nct6796) {
-				int regval_ed = superio_inb(sioreg, 0xed);
+				int cred = superio_inb(sioreg, 0xed);
 
 				if (!fan6pin)
-					fan6pin = (regval_2a & BIT(4)) &&
-					  (!dsw_en || (regval_ed & BIT(4)));
+					fan6pin = (cr2a & BIT(4)) &&
+					  (!dsw_en || (cred & BIT(4)));
 				if (!pwm6pin)
-					pwm6pin = (regval_2a & BIT(3)) &&
-					  (regval_ed & BIT(2));
+					pwm6pin = (cr2a & BIT(3)) &&
+					  (cred & BIT(2));
 			}
 
 			if (data->kind == nct6796) {
-				int regval_1d = superio_inb(sioreg, 0x1d);
-				int regval_2b = superio_inb(sioreg, 0x2b);
+				int cr1d = superio_inb(sioreg, 0x1d);
+				int cr2b = superio_inb(sioreg, 0x2b);
 
-				fan7pin = !(regval_2b & BIT(2));
-				pwm7pin = !(regval_1d & (BIT(2) | BIT(3)));
+				fan7pin = !(cr2b & BIT(2));
+				pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
 			}
 
 			break;
Signature · 1 line
2.7.4
author maintainer
#1 lore raw

PATCH 2/13 hwmon: (nct6775) Replace 'regval' with variables named after config registers

Using variables named after configuration registers makes it more obvious which configuration register value is used, especially if more than one configuration register value is used to determine a configuration detail.

No functional change.

---
 drivers/hwmon/nct6775.c | 43 +++++++++++++++++++++++--------------------
 1 file changed, 23 insertions(+), 20 deletions(-)
drivers/hwmon/nct6775.c +23 -20
index 7a3a1d59553e..bd1c4772994a 100644
@@ -3436,7 +3436,8 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 	bool pwm3pin = false, pwm4pin = false, pwm5pin = false;
 	bool pwm6pin = false, pwm7pin = false;
 	int sioreg = data->sioreg;
-	int regval;
+	int cr24;
+	int cr2c;
 
 	/* Store SIO_REG_ENABLE for use during resume */
 	superio_select(sioreg, NCT6775_LD_HWM);
@@ -3444,10 +3445,10 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 
 	/* fan4 and fan5 share some pins with the GPIO and serial flash */
 	if (data->kind == nct6775) {
-		regval = superio_inb(sioreg, 0x2c);
+		cr2c = superio_inb(sioreg, 0x2c);
 
-		fan3pin = regval & BIT(6);
-		pwm3pin = regval & BIT(7);
+		fan3pin = cr2c & BIT(6);
+		pwm3pin = cr2c & BIT(7);
 
 		/* On NCT6775, fan4 shares pins with the fdc interface */
 		fan4pin = !(superio_inb(sioreg, 0x2A) & 0x80);
@@ -3492,30 +3493,32 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		fan4min = fan4pin;
 		pwm3pin = fan3pin;
 	} else if (data->kind == nct6106) {
-		regval = superio_inb(sioreg, 0x24);
-		fan3pin = !(regval & 0x80);
-		pwm3pin = regval & 0x08;
+		cr24 = superio_inb(sioreg, 0x24);
+		fan3pin = !(cr24 & 0x80);
+		pwm3pin = cr24 & 0x08;
 	} else {
 		/* NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D */
 		int cr1b, cr2a, cr2f;
+		int cr1c;
+		int cr2d;
 		bool dsw_en;
 
-		regval = superio_inb(sioreg, 0x1c);
+		cr1c = superio_inb(sioreg, 0x1c);
 
-		fan3pin = !(regval & BIT(5));
-		fan4pin = !(regval & BIT(6));
-		fan5pin = !(regval & BIT(7));
+		fan3pin = !(cr1c & BIT(5));
+		fan4pin = !(cr1c & BIT(6));
+		fan5pin = !(cr1c & BIT(7));
 
-		pwm3pin = !(regval & BIT(0));
-		pwm4pin = !(regval & BIT(1));
-		pwm5pin = !(regval & BIT(2));
+		pwm3pin = !(cr1c & BIT(0));
+		pwm4pin = !(cr1c & BIT(1));
+		pwm5pin = !(cr1c & BIT(2));
 
-		regval = superio_inb(sioreg, 0x2d);
+		cr2d = superio_inb(sioreg, 0x2d);
 		switch (data->kind) {
 		case nct6791:
 		case nct6792:
-			fan6pin = regval & BIT(1);
-			pwm6pin = regval & BIT(0);
+			fan6pin = cr2d & BIT(1);
+			pwm6pin = cr2d & BIT(0);
 			break;
 		case nct6793:
 		case nct6795:
@@ -3526,7 +3529,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 			dsw_en = cr2f & BIT(3);
 
 			if (!pwm5pin)
-				pwm5pin = regval & BIT(7);
+				pwm5pin = cr2d & BIT(7);
 
 			if (!fan5pin)
 				fan5pin = cr1b & BIT(5);
@@ -3536,8 +3539,8 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 				int creb = superio_inb(sioreg, 0xeb);
 
 				if (!dsw_en) {
-					fan6pin = regval & BIT(1);
-					pwm6pin = regval & BIT(0);
+					fan6pin = cr2d & BIT(1);
+					pwm6pin = cr2d & BIT(0);
 				}
 
 				if (!fan5pin)
Signature · 1 line
2.7.4
author maintainer
#2 lore raw

PATCH 3/13 hwmon: (nct6775) Move config variable declarations and initializations

In reply to Guenter Roeck

Group configuration variable declarations and initialization together. While this results in reading more registers than necessary for a given chip, it improves code readability and simplifies extending the code.

---
 drivers/hwmon/nct6775.c | 30 +++++++++++-------------------
 1 file changed, 11 insertions(+), 19 deletions(-)
drivers/hwmon/nct6775.c +11 -19
index bd1c4772994a..aa8a44608ca3 100644
@@ -3436,8 +3436,6 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 	bool pwm3pin = false, pwm4pin = false, pwm5pin = false;
 	bool pwm6pin = false, pwm7pin = false;
 	int sioreg = data->sioreg;
-	int cr24;
-	int cr2c;
 
 	/* Store SIO_REG_ENABLE for use during resume */
 	superio_select(sioreg, NCT6775_LD_HWM);
@@ -3445,7 +3443,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 
 	/* fan4 and fan5 share some pins with the GPIO and serial flash */
 	if (data->kind == nct6775) {
-		cr2c = superio_inb(sioreg, 0x2c);
+		int cr2c = superio_inb(sioreg, 0x2c);
 
 		fan3pin = cr2c & BIT(6);
 		pwm3pin = cr2c & BIT(7);
@@ -3493,17 +3491,20 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		fan4min = fan4pin;
 		pwm3pin = fan3pin;
 	} else if (data->kind == nct6106) {
-		cr24 = superio_inb(sioreg, 0x24);
+		int cr24 = superio_inb(sioreg, 0x24);
+
 		fan3pin = !(cr24 & 0x80);
 		pwm3pin = cr24 & 0x08;
 	} else {
 		/* NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D */
-		int cr1b, cr2a, cr2f;
-		int cr1c;
-		int cr2d;
-		bool dsw_en;
-
-		cr1c = superio_inb(sioreg, 0x1c);
+		int cr1b = superio_inb(sioreg, 0x1b);
+		int cr1c = superio_inb(sioreg, 0x1c);
+		int cr1d = superio_inb(sioreg, 0x1d);
+		int cr2a = superio_inb(sioreg, 0x2a);
+		int cr2b = superio_inb(sioreg, 0x2b);
+		int cr2d = superio_inb(sioreg, 0x2d);
+		int cr2f = superio_inb(sioreg, 0x2f);
+		bool dsw_en = cr2f & BIT(3);
 
 		fan3pin = !(cr1c & BIT(5));
 		fan4pin = !(cr1c & BIT(6));
@@ -3513,7 +3514,6 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		pwm4pin = !(cr1c & BIT(1));
 		pwm5pin = !(cr1c & BIT(2));
 
-		cr2d = superio_inb(sioreg, 0x2d);
 		switch (data->kind) {
 		case nct6791:
 		case nct6792:
@@ -3523,11 +3523,6 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		case nct6793:
 		case nct6795:
 		case nct6796:
-			cr1b = superio_inb(sioreg, 0x1b);
-			cr2a = superio_inb(sioreg, 0x2a);
-			cr2f = superio_inb(sioreg, 0x2f);
-			dsw_en = cr2f & BIT(3);
-
 			if (!pwm5pin)
 				pwm5pin = cr2d & BIT(7);
 
@@ -3566,9 +3561,6 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 			}
 
 			if (data->kind == nct6796) {
-				int cr1d = superio_inb(sioreg, 0x1d);
-				int cr2b = superio_inb(sioreg, 0x2b);
-
 				fan7pin = !(cr2b & BIT(2));
 				pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
 			}
Signature · 1 line
2.7.4
author maintainer
#3 lore raw

PATCH 4/13 hwmon: (nct6775) Declare and initialize LDN specific config variables earlier

In reply to Guenter Roeck

Declare and initialize LDN / chip specific configuration variables earlier. This simplifies re-using the configuration variables for multiple chips and makes the code easier to read.

---
 drivers/hwmon/nct6775.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/hwmon/nct6775.c +6 -5
index aa8a44608ca3..984b22d4999a 100644
@@ -3505,6 +3505,12 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		int cr2d = superio_inb(sioreg, 0x2d);
 		int cr2f = superio_inb(sioreg, 0x2f);
 		bool dsw_en = cr2f & BIT(3);
+		int creb;
+		int cred;
+
+		superio_select(sioreg, NCT6775_LD_12);
+		creb = superio_inb(sioreg, 0xeb);
+		cred = superio_inb(sioreg, 0xed);
 
 		fan3pin = !(cr1c & BIT(5));
 		fan4pin = !(cr1c & BIT(6));
@@ -3529,10 +3535,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 			if (!fan5pin)
 				fan5pin = cr1b & BIT(5);
 
-			superio_select(sioreg, NCT6775_LD_12);
 			if (data->kind != nct6796) {
-				int creb = superio_inb(sioreg, 0xeb);
-
 				if (!dsw_en) {
 					fan6pin = cr2d & BIT(1);
 					pwm6pin = cr2d & BIT(0);
@@ -3550,8 +3553,6 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 			}
 
 			if (data->kind == nct6795 || data->kind == nct6796) {
-				int cred = superio_inb(sioreg, 0xed);
-
 				if (!fan6pin)
 					fan6pin = (cr2a & BIT(4)) &&
 					  (!dsw_en || (cred & BIT(4)));
Signature · 1 line
2.7.4
author maintainer
#4 lore raw

PATCH 5/13 hwmon: (nct6775) Use logical or instead of if statements where possible

In reply to Guenter Roeck

Use

	boolean |= <expression>;
instead of
	if (!boolean)
		boolean = <expression>;

to assign values to boolean variables.

No functional change.

---
 drivers/hwmon/nct6775.c | 34 +++++++++++-----------------------
 1 file changed, 11 insertions(+), 23 deletions(-)
drivers/hwmon/nct6775.c +11 -23
index 984b22d4999a..0f20f7c2a96b 100644
@@ -3529,36 +3529,24 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		case nct6793:
 		case nct6795:
 		case nct6796:
-			if (!pwm5pin)
-				pwm5pin = cr2d & BIT(7);
+			pwm5pin |= cr2d & BIT(7);
 
-			if (!fan5pin)
-				fan5pin = cr1b & BIT(5);
+			fan5pin |= cr1b & BIT(5);
 
 			if (data->kind != nct6796) {
-				if (!dsw_en) {
-					fan6pin = cr2d & BIT(1);
-					pwm6pin = cr2d & BIT(0);
-				}
+				fan6pin = !dsw_en && (cr2d & BIT(1));
+				pwm6pin = !dsw_en && (cr2d & BIT(0));
 
-				if (!fan5pin)
-					fan5pin = creb & BIT(5);
-				if (!pwm5pin)
-					pwm5pin = (creb & BIT(4)) &&
-						!(cr2a & BIT(0));
-				if (!fan6pin)
-					fan6pin = creb & BIT(3);
-				if (!pwm6pin)
-					pwm6pin = creb & BIT(2);
+				fan5pin |= creb & BIT(5);
+				pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
+				fan6pin |= creb & BIT(3);
+				pwm6pin |= creb & BIT(2);
 			}
 
 			if (data->kind == nct6795 || data->kind == nct6796) {
-				if (!fan6pin)
-					fan6pin = (cr2a & BIT(4)) &&
-					  (!dsw_en || (cred & BIT(4)));
-				if (!pwm6pin)
-					pwm6pin = (cr2a & BIT(3)) &&
-					  (cred & BIT(2));
+				fan6pin |= (cr2a & BIT(4)) &&
+						(!dsw_en || (cred & BIT(4)));
+				pwm6pin |= (cr2a & BIT(3)) && (cred & BIT(2));
 			}
 
 			if (data->kind == nct6796) {
Signature · 1 line
2.7.4
author maintainer
#5 lore raw

PATCH 6/13 hwmon: (nct6775) Improve instruction grouping

In reply to Guenter Roeck

When determining support for a given fan or pwm control, the code is easier to read if the necessary instructions are grouped together.

No functional change.

---
 drivers/hwmon/nct6775.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/hwmon/nct6775.c +4 -4
index 0f20f7c2a96b..0ad4bf0ab8be 100644
@@ -3530,16 +3530,16 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		case nct6795:
 		case nct6796:
 			pwm5pin |= cr2d & BIT(7);
-
 			fan5pin |= cr1b & BIT(5);
 
 			if (data->kind != nct6796) {
-				fan6pin = !dsw_en && (cr2d & BIT(1));
-				pwm6pin = !dsw_en && (cr2d & BIT(0));
-
 				fan5pin |= creb & BIT(5);
 				pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
+
+				fan6pin = !dsw_en && (cr2d & BIT(1));
 				fan6pin |= creb & BIT(3);
+
+				pwm6pin = !dsw_en && (cr2d & BIT(0));
 				pwm6pin |= creb & BIT(2);
 			}
 
Signature · 1 line
2.7.4
author maintainer
#6 lore raw

PATCH 7/13 hwmon: (nct6775) Fix fan6/pwm6 detection for NCT6792D

In reply to Guenter Roeck

Per datasheet, AUXFANIN3 (fan6) and AUXFANOUT3 (pwm6) are only connected if DSW_EN is false.

---
 drivers/hwmon/nct6775.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/hwmon/nct6775.c +4 -1
index 0ad4bf0ab8be..6e11df697e6e 100644
@@ -3522,10 +3522,13 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 
 		switch (data->kind) {
 		case nct6791:
-		case nct6792:
 			fan6pin = cr2d & BIT(1);
 			pwm6pin = cr2d & BIT(0);
 			break;
+		case nct6792:
+			fan6pin = !dsw_en && (cr2d & BIT(1));
+			pwm6pin = !dsw_en && (cr2d & BIT(0));
+			break;
 		case nct6793:
 		case nct6795:
 		case nct6796:
Signature · 1 line
2.7.4
author maintainer
#7 lore raw

PATCH 8/13 hwmon: (nct6775) Separate fan/pwm configuration detection for NCT6793D

In reply to Guenter Roeck

While detecting the configuration for multiple chips in one go reduces code size, it also increases code complexity. Separate chip detection to improve code readability. As first step, separate detection for NCT6793D.

No functional change.

---
 drivers/hwmon/nct6775.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)
drivers/hwmon/nct6775.c +14 -5
index 6e11df697e6e..556b4cfacbd1 100644
@@ -3530,6 +3530,17 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 			pwm6pin = !dsw_en && (cr2d & BIT(0));
 			break;
 		case nct6793:
+			fan5pin |= cr1b & BIT(5);
+			fan5pin |= creb & BIT(5);
+
+			fan6pin = creb & BIT(3);
+
+			pwm5pin |= cr2d & BIT(7);
+			pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
+
+			pwm6pin = !dsw_en && (cr2d & BIT(0));
+			pwm6pin |= creb & BIT(2);
+			break;
 		case nct6795:
 		case nct6796:
 			pwm5pin |= cr2d & BIT(7);
@@ -3546,11 +3557,9 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 				pwm6pin |= creb & BIT(2);
 			}
 
-			if (data->kind == nct6795 || data->kind == nct6796) {
-				fan6pin |= (cr2a & BIT(4)) &&
-						(!dsw_en || (cred & BIT(4)));
-				pwm6pin |= (cr2a & BIT(3)) && (cred & BIT(2));
-			}
+			fan6pin |= (cr2a & BIT(4)) &&
+					(!dsw_en || (cred & BIT(4)));
+			pwm6pin |= (cr2a & BIT(3)) && (cred & BIT(2));
 
 			if (data->kind == nct6796) {
 				fan7pin = !(cr2b & BIT(2));
Signature · 1 line
2.7.4
author maintainer
#8 lore raw

PATCH 9/13 hwmon: (nct6775) Separate fan/pwm configuration detection for NCT6795D

In reply to Guenter Roeck

Separate fan/pwm configuration detection for NCT6795D into separate case statement to make the code easier to read.

No functional change.

---
 drivers/hwmon/nct6775.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)
drivers/hwmon/nct6775.c +15 -4
index 556b4cfacbd1..d9c2b934321d 100644
@@ -3542,6 +3542,19 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 			pwm6pin |= creb & BIT(2);
 			break;
 		case nct6795:
+			fan5pin |= cr1b & BIT(5);
+			fan5pin |= creb & BIT(5);
+
+			fan6pin = (cr2a & BIT(4)) &&
+					(!dsw_en || (cred & BIT(4)));
+			fan6pin |= creb & BIT(3);
+
+			pwm5pin |= cr2d & BIT(7);
+			pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
+
+			pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
+			pwm6pin |= creb & BIT(2);
+			break;
 		case nct6796:
 			pwm5pin |= cr2d & BIT(7);
 			fan5pin |= cr1b & BIT(5);
@@ -3561,10 +3574,8 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 					(!dsw_en || (cred & BIT(4)));
 			pwm6pin |= (cr2a & BIT(3)) && (cred & BIT(2));
 
-			if (data->kind == nct6796) {
-				fan7pin = !(cr2b & BIT(2));
-				pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
-			}
+			fan7pin = !(cr2b & BIT(2));
+			pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
 
 			break;
 		default:	/* NCT6779D */
Signature · 1 line
2.7.4
author maintainer
#9 lore raw

PATCH 10/13 hwmon: (nct6796) Clean up and amend fan/pwm configuration for NCT6796D

In reply to Guenter Roeck

Now that everything is separated, clean up fan and pwm configuration for NCT6796D. While doing that, take the forgotten configuration register cre0 into account to determine if AUXFANIN2 (fan5) and AUXFANOUT2 (pwm5) are connected.

---
 drivers/hwmon/nct6775.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)
drivers/hwmon/nct6775.c +13 -14
index d9c2b934321d..c07414dd38dd 100644
@@ -3505,10 +3505,12 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		int cr2d = superio_inb(sioreg, 0x2d);
 		int cr2f = superio_inb(sioreg, 0x2f);
 		bool dsw_en = cr2f & BIT(3);
+		int cre0;
 		int creb;
 		int cred;
 
 		superio_select(sioreg, NCT6775_LD_12);
+		cre0 = superio_inb(sioreg, 0xe0);
 		creb = superio_inb(sioreg, 0xeb);
 		cred = superio_inb(sioreg, 0xed);
 
@@ -3556,27 +3558,24 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 			pwm6pin |= creb & BIT(2);
 			break;
 		case nct6796:
-			pwm5pin |= cr2d & BIT(7);
 			fan5pin |= cr1b & BIT(5);
+			fan5pin |= (cre0 & BIT(3)) && !(cr1b & BIT(0));
+			fan5pin |= creb & BIT(5);
 
-			if (data->kind != nct6796) {
-				fan5pin |= creb & BIT(5);
-				pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
+			fan6pin = (cr2a & BIT(4)) &&
+					(!dsw_en || (cred & BIT(4)));
+			fan6pin |= creb & BIT(3);
 
-				fan6pin = !dsw_en && (cr2d & BIT(1));
-				fan6pin |= creb & BIT(3);
+			fan7pin = !(cr2b & BIT(2));
 
-				pwm6pin = !dsw_en && (cr2d & BIT(0));
-				pwm6pin |= creb & BIT(2);
-			}
+			pwm5pin |= cr2d & BIT(7);
+			pwm5pin |= (cre0 & BIT(4)) && !(cr1b & BIT(0));
+			pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
 
-			fan6pin |= (cr2a & BIT(4)) &&
-					(!dsw_en || (cred & BIT(4)));
-			pwm6pin |= (cr2a & BIT(3)) && (cred & BIT(2));
+			pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
+			pwm6pin |= creb & BIT(2);
 
-			fan7pin = !(cr2b & BIT(2));
 			pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
-
 			break;
 		default:	/* NCT6779D */
 			break;
Signature · 1 line
2.7.4
author maintainer
#10 lore raw

PATCH 11/13 hwmon: (nct6775) Fix names of DIMM temperature sources

In reply to Guenter Roeck

For NCT6795D and NCT6796D, the DIMM temperature sources are named "Agent[01] Dimm [01]" per datasheet. Match names in datasheets to avoid confusion.

---
 drivers/hwmon/nct6775.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/hwmon/nct6775.c +8 -8
index c07414dd38dd..77255f7da974 100644
@@ -704,10 +704,10 @@ static const char *const nct6795_temp_label[] = {
 	"PCH_CHIP_TEMP",
 	"PCH_CPU_TEMP",
 	"PCH_MCH_TEMP",
-	"PCH_DIM0_TEMP",
-	"PCH_DIM1_TEMP",
-	"PCH_DIM2_TEMP",
-	"PCH_DIM3_TEMP",
+	"Agent0 Dimm0",
+	"Agent0 Dimm1",
+	"Agent1 Dimm0",
+	"Agent1 Dimm1",
 	"BYTE_TEMP0",
 	"BYTE_TEMP1",
 	"PECI Agent 0 Calibration",
@@ -742,10 +742,10 @@ static const char *const nct6796_temp_label[] = {
 	"PCH_CHIP_TEMP",
 	"PCH_CPU_TEMP",
 	"PCH_MCH_TEMP",
-	"PCH_DIM0_TEMP",
-	"PCH_DIM1_TEMP",
-	"PCH_DIM2_TEMP",
-	"PCH_DIM3_TEMP",
+	"Agent0 Dimm0",
+	"Agent0 Dimm1",
+	"Agent1 Dimm0",
+	"Agent1 Dimm1",
 	"BYTE_TEMP0",
 	"BYTE_TEMP1",
 	"PECI Agent 0 Calibration",
Signature · 1 line
2.7.4
author maintainer
#11 lore raw

PATCH 12/13 hwmon: (nct6775) Add support for NCT6797D

In reply to Guenter Roeck

Add support for NCT6797D. With the exception of fan/pwm configuration registers, it is mostly compatible with NCT6795D.

---
 drivers/hwmon/nct6775.c | 45 +++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 41 insertions(+), 4 deletions(-)
drivers/hwmon/nct6775.c +41 -4
index 77255f7da974..9569acf80e18 100644
@@ -42,6 +42,7 @@
  * nct6793d    15      6       6       2+6    0xd120 0xc1    0x5ca3
  * nct6795d    14      6       6       2+6    0xd350 0xc1    0x5ca3
  * nct6796d    14      7       7       2+6    0xd420 0xc1    0x5ca3
+ * nct6797d    14      7       7       2+6    0xd450 0xc1    0x5ca3
  *
  * #temp lists the number of monitored temperature sources (first value) plus
  * the number of directly connectable temperature sensors (second value).
@@ -69,7 +70,7 @@
 #define USE_ALTERNATE
 
 enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793,
-	     nct6795, nct6796 };
+	     nct6795, nct6796, nct6797 };
 
 /* used to set data->name = nct6775_device_names[data->sio_kind] */
 static const char * const nct6775_device_names[] = {
@@ -82,6 +83,7 @@ static const char * const nct6775_device_names[] = {
 	"nct6793",
 	"nct6795",
 	"nct6796",
+	"nct6797",
 };
 
 static const char * const nct6775_sio_names[] __initconst = {
@@ -94,6 +96,7 @@ static const char * const nct6775_sio_names[] __initconst = {
 	"NCT6793D",
 	"NCT6795D",
 	"NCT6796D",
+	"NCT6797D",
 };
 
 static unsigned short force_id;
@@ -129,6 +132,7 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
 #define SIO_NCT6793_ID		0xd120
 #define SIO_NCT6795_ID		0xd350
 #define SIO_NCT6796_ID		0xd420
+#define SIO_NCT6797_ID		0xd450
 #define SIO_ID_MASK		0xFFF0
 
 enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
@@ -504,7 +508,7 @@ static const s8 NCT6779_BEEP_BITS[] = {
 static const u16 NCT6779_REG_FAN[] = {
 	0x4c0, 0x4c2, 0x4c4, 0x4c6, 0x4c8, 0x4ca, 0x4ce };
 static const u16 NCT6779_REG_FAN_PULSES[NUM_FAN] = {
-	0x644, 0x645, 0x646, 0x647, 0x648, 0x649 };
+	0x644, 0x645, 0x646, 0x647, 0x648, 0x649, 0x64f };
 
 static const u16 NCT6779_REG_CRITICAL_PWM_ENABLE[] = {
 	0x136, 0x236, 0x336, 0x836, 0x936, 0xa36, 0xb36 };
@@ -1288,6 +1292,7 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg)
 	case nct6793:
 	case nct6795:
 	case nct6796:
+	case nct6797:
 		return reg == 0x150 || reg == 0x153 || reg == 0x155 ||
 		  (reg & 0xfff0) == 0x4c0 ||
 		  reg == 0x402 ||
@@ -1643,6 +1648,7 @@ static void nct6775_update_pwm_limits(struct device *dev)
 		case nct6793:
 		case nct6795:
 		case nct6796:
+		case nct6797:
 			reg = nct6775_read_value(data,
 					data->REG_CRITICAL_PWM_ENABLE[i]);
 			if (reg & data->CRITICAL_PWM_ENABLE_MASK)
@@ -3077,6 +3083,7 @@ store_auto_pwm(struct device *dev, struct device_attribute *attr,
 		case nct6793:
 		case nct6795:
 		case nct6796:
+		case nct6797:
 			nct6775_write_value(data, data->REG_CRITICAL_PWM[nr],
 					    val);
 			reg = nct6775_read_value(data,
@@ -3496,7 +3503,11 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		fan3pin = !(cr24 & 0x80);
 		pwm3pin = cr24 & 0x08;
 	} else {
-		/* NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D */
+		/*
+		 * NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D,
+		 * NCT6797D
+		 */
+		int cr1a = superio_inb(sioreg, 0x1a);
 		int cr1b = superio_inb(sioreg, 0x1b);
 		int cr1c = superio_inb(sioreg, 0x1c);
 		int cr1d = superio_inb(sioreg, 0x1d);
@@ -3505,6 +3516,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		int cr2d = superio_inb(sioreg, 0x2d);
 		int cr2f = superio_inb(sioreg, 0x2f);
 		bool dsw_en = cr2f & BIT(3);
+		bool ddr4_en = cr2f & BIT(4);
 		int cre0;
 		int creb;
 		int cred;
@@ -3577,6 +3589,23 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 
 			pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
 			break;
+		case nct6797:
+			fan5pin |= !ddr4_en && (cr1b & BIT(5));
+			fan5pin |= creb & BIT(5);
+
+			fan6pin = cr2a & BIT(4);
+			fan6pin |= creb & BIT(3);
+
+			fan7pin = cr1a & BIT(1);
+
+			pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
+			pwm5pin |= !ddr4_en && (cr2d & BIT(7));
+
+			pwm6pin = creb & BIT(2);
+			pwm6pin |= cred & BIT(2);
+
+			pwm7pin = cr1d & BIT(4);
+			break;
 		default:	/* NCT6779D */
 			break;
 		}
@@ -3954,8 +3983,10 @@ static int nct6775_probe(struct platform_device *pdev)
 	case nct6793:
 	case nct6795:
 	case nct6796:
+	case nct6797:
 		data->in_num = 15;
-		data->pwm_num = (data->kind == nct6796) ? 7 : 6;
+		data->pwm_num = (data->kind == nct6796 ||
+				 data->kind == nct6797) ? 7 : 6;
 		data->auto_pwm_num = 4;
 		data->has_fan_div = false;
 		data->temp_fixed_num = 6;
@@ -3989,6 +4020,7 @@ static int nct6775_probe(struct platform_device *pdev)
 			data->virt_temp_mask = NCT6793_VIRT_TEMP_MASK;
 			break;
 		case nct6795:
+		case nct6797:
 			data->temp_label = nct6795_temp_label;
 			data->temp_mask = NCT6795_TEMP_MASK;
 			data->virt_temp_mask = NCT6795_VIRT_TEMP_MASK;
@@ -4267,6 +4299,7 @@ static int nct6775_probe(struct platform_device *pdev)
 	case nct6793:
 	case nct6795:
 	case nct6796:
+	case nct6797:
 		break;
 	}
 
@@ -4302,6 +4335,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		case nct6793:
 		case nct6795:
 		case nct6796:
+		case nct6797:
 			tmp |= 0x7e;
 			break;
 		}
@@ -4504,6 +4538,9 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
 	case SIO_NCT6796_ID:
 		sio_data->kind = nct6796;
 		break;
+	case SIO_NCT6797_ID:
+		sio_data->kind = nct6797;
+		break;
 	default:
 		if (val != 0xffff)
 			pr_debug("unsupported chip ID: 0x%04x\n", val);
Signature · 1 line
2.7.4
author maintainer
#12 lore raw

PATCH 13/13 hwmon: (nct6775) Add support for NCT6798D

In reply to Guenter Roeck

NCT6798D is, with the exception of fan and pwm channel configuration registers, similar to other chips of the series. One interesting difference is the chip ID, which is now extended to 13 bit (the 12-bit chip ID value overlaps with the chip ID of NCT6797D).

---
 drivers/hwmon/nct6775.c | 84 ++++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 80 insertions(+), 4 deletions(-)
drivers/hwmon/nct6775.c +80 -4
index 9569acf80e18..c3040079b1cb 100644
@@ -43,6 +43,9 @@
  * nct6795d    14      6       6       2+6    0xd350 0xc1    0x5ca3
  * nct6796d    14      7       7       2+6    0xd420 0xc1    0x5ca3
  * nct6797d    14      7       7       2+6    0xd450 0xc1    0x5ca3
+ *                                           (0xd451)
+ * nct6798d    14      7       7       2+6    0xd458 0xc1    0x5ca3
+ *                                           (0xd459)
  *
  * #temp lists the number of monitored temperature sources (first value) plus
  * the number of directly connectable temperature sensors (second value).
@@ -70,7 +73,7 @@
 #define USE_ALTERNATE
 
 enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793,
-	     nct6795, nct6796, nct6797 };
+	     nct6795, nct6796, nct6797, nct6798 };
 
 /* used to set data->name = nct6775_device_names[data->sio_kind] */
 static const char * const nct6775_device_names[] = {
@@ -84,6 +87,7 @@ static const char * const nct6775_device_names[] = {
 	"nct6795",
 	"nct6796",
 	"nct6797",
+	"nct6798",
 };
 
 static const char * const nct6775_sio_names[] __initconst = {
@@ -97,6 +101,7 @@ static const char * const nct6775_sio_names[] __initconst = {
 	"NCT6795D",
 	"NCT6796D",
 	"NCT6797D",
+	"NCT6798D",
 };
 
 static unsigned short force_id;
@@ -133,7 +138,8 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
 #define SIO_NCT6795_ID		0xd350
 #define SIO_NCT6796_ID		0xd420
 #define SIO_NCT6797_ID		0xd450
-#define SIO_ID_MASK		0xFFF0
+#define SIO_NCT6798_ID		0xd458
+#define SIO_ID_MASK		0xFFF8
 
 enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
 
@@ -761,6 +767,44 @@ static const char *const nct6796_temp_label[] = {
 #define NCT6796_TEMP_MASK	0xbfff0ffe
 #define NCT6796_VIRT_TEMP_MASK	0x80000c00
 
+static const char *const nct6798_temp_label[] = {
+	"",
+	"SYSTIN",
+	"CPUTIN",
+	"AUXTIN0",
+	"AUXTIN1",
+	"AUXTIN2",
+	"AUXTIN3",
+	"AUXTIN4",
+	"SMBUSMASTER 0",
+	"SMBUSMASTER 1",
+	"Virtual_TEMP",
+	"Virtual_TEMP",
+	"",
+	"",
+	"",
+	"",
+	"PECI Agent 0",
+	"PECI Agent 1",
+	"PCH_CHIP_CPU_MAX_TEMP",
+	"PCH_CHIP_TEMP",
+	"PCH_CPU_TEMP",
+	"PCH_MCH_TEMP",
+	"Agent0 Dimm0",
+	"Agent0 Dimm1",
+	"Agent1 Dimm0",
+	"Agent1 Dimm1",
+	"BYTE_TEMP0",
+	"BYTE_TEMP1",
+	"",
+	"",
+	"",
+	"Virtual_TEMP"
+};
+
+#define NCT6798_TEMP_MASK	0x8fff0ffe
+#define NCT6798_VIRT_TEMP_MASK	0x80000c00
+
 /* NCT6102D/NCT6106D specific data */
 
 #define NCT6106_REG_VBAT	0x318
@@ -1293,6 +1337,7 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg)
 	case nct6795:
 	case nct6796:
 	case nct6797:
+	case nct6798:
 		return reg == 0x150 || reg == 0x153 || reg == 0x155 ||
 		  (reg & 0xfff0) == 0x4c0 ||
 		  reg == 0x402 ||
@@ -1649,6 +1694,7 @@ static void nct6775_update_pwm_limits(struct device *dev)
 		case nct6795:
 		case nct6796:
 		case nct6797:
+		case nct6798:
 			reg = nct6775_read_value(data,
 					data->REG_CRITICAL_PWM_ENABLE[i]);
 			if (reg & data->CRITICAL_PWM_ENABLE_MASK)
@@ -3084,6 +3130,7 @@ store_auto_pwm(struct device *dev, struct device_attribute *attr,
 		case nct6795:
 		case nct6796:
 		case nct6797:
+		case nct6798:
 			nct6775_write_value(data, data->REG_CRITICAL_PWM[nr],
 					    val);
 			reg = nct6775_read_value(data,
@@ -3505,7 +3552,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 	} else {
 		/*
 		 * NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D,
-		 * NCT6797D
+		 * NCT6797D, NCT6798D
 		 */
 		int cr1a = superio_inb(sioreg, 0x1a);
 		int cr1b = superio_inb(sioreg, 0x1b);
@@ -3606,6 +3653,23 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 
 			pwm7pin = cr1d & BIT(4);
 			break;
+		case nct6798:
+			fan6pin = !(cr1b & BIT(0)) && (cre0 & BIT(3));
+			fan6pin |= cr2a & BIT(4);
+			fan6pin |= creb & BIT(5);
+
+			fan7pin = cr1b & BIT(5);
+			fan7pin |= !(cr2b & BIT(2));
+			fan7pin |= creb & BIT(3);
+
+			pwm6pin = !(cr1b & BIT(0)) && (cre0 & BIT(4));
+			pwm6pin |= !(cred & BIT(2)) && (cr2a & BIT(3));
+			pwm6pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
+
+			pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
+			pwm7pin |= cr2d & BIT(7);
+			pwm7pin |= creb & BIT(2);
+			break;
 		default:	/* NCT6779D */
 			break;
 		}
@@ -3984,9 +4048,11 @@ static int nct6775_probe(struct platform_device *pdev)
 	case nct6795:
 	case nct6796:
 	case nct6797:
+	case nct6798:
 		data->in_num = 15;
 		data->pwm_num = (data->kind == nct6796 ||
-				 data->kind == nct6797) ? 7 : 6;
+				 data->kind == nct6797 ||
+				 data->kind == nct6798) ? 7 : 6;
 		data->auto_pwm_num = 4;
 		data->has_fan_div = false;
 		data->temp_fixed_num = 6;
@@ -4030,6 +4096,11 @@ static int nct6775_probe(struct platform_device *pdev)
 			data->temp_mask = NCT6796_TEMP_MASK;
 			data->virt_temp_mask = NCT6796_VIRT_TEMP_MASK;
 			break;
+		case nct6798:
+			data->temp_label = nct6798_temp_label;
+			data->temp_mask = NCT6798_TEMP_MASK;
+			data->virt_temp_mask = NCT6798_VIRT_TEMP_MASK;
+			break;
 		}
 
 		data->REG_CONFIG = NCT6775_REG_CONFIG;
@@ -4300,6 +4371,7 @@ static int nct6775_probe(struct platform_device *pdev)
 	case nct6795:
 	case nct6796:
 	case nct6797:
+	case nct6798:
 		break;
 	}
 
@@ -4336,6 +4408,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		case nct6795:
 		case nct6796:
 		case nct6797:
+		case nct6798:
 			tmp |= 0x7e;
 			break;
 		}
@@ -4541,6 +4614,9 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
 	case SIO_NCT6797_ID:
 		sio_data->kind = nct6797;
 		break;
+	case SIO_NCT6798_ID:
+		sio_data->kind = nct6798;
+		break;
 	default:
 		if (val != 0xffff)
 			pr_debug("unsupported chip ID: 0x%04x\n", val);
Signature · 1 line
2.7.4