Skip to contentSkip to conversation

of: unittest: Don't dereference args.np after test errors

PATCH In review Guenter Roeck 2 participants 4 messages Sep 23, 2018 – Sep 25, 2018 Device tree

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 of: unittest: Don't dereference args.np after test errors

If a devicetree parse function fails, it is quite likely that args.np is invalid. Trying to dereference it will then cause the system to crash.

This was seen when trying to run devicetree unittests on a g3beige qemu system. This system has the OF_IMAP_OLDWORLD_MAC flag set in of_irq_workarounds and expects an 'old style' structure of irq nodes. Trying to parse the test nodes fails and results in the following crash.

OF: /testcase-data/phandle-tests/consumer-b: arguments longer than property

Unable to handle kernel paging request for data at address 0x00bc616e
Faulting instruction address: 0xc092437c
Oops: Kernel access of bad area, sig: 11 [#1]
BE PREEMPT PowerMac
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc4-yocto-standard+ #1
NIP:  c092437c LR: c0925098 CTR: c0925088
REGS: cf8dfb40 TRAP: 0300   Not tainted  (4.19.0-rc4-yocto-standard+)
MSR:  00001032 <ME,IR,DR,RI>  CR: 82004044  XER: 00000000
DAR: 00bc616e DSISR: 40000000

GPR00: c0925098 cf8dfbf0 cf8e0000 c14098c7 c14098c7 c1409c50 00000066 00000002
GPR08: 00000063 00bc614e c0b483e9 000affff 82004048 00000000 00000008 c0b36d80
GPR16: c0ac0000 c0b4233c c14098c7 c0b13c14 05ffffff 000affff c0b483e4 c0b00a30
GPR24: cecfe324 cecfe324 c0acc434 c0ac8420 c1409c50 05ffffff c1409c50 c14098c7 NIP [c092437c] device_node_gen_full_name+0x30/0x15c
LR [c0925098] device_node_string+0x190/0x3c8

Call Trace:
[cf8dfbf0] [c0733704] of_find_property+0x5c/0x74 (unreliable)
[cf8dfc30] [c0925098] device_node_string+0x190/0x3c8
[cf8dfca0] [c092690c] pointer+0x274/0x4d4
[cf8dfcd0] [c0926e20] vsnprintf+0x2b4/0x5ec
[cf8dfd30] [c0927170] vscnprintf+0x18/0x48
[cf8dfd40] [c008eb70] vprintk_store+0x4c/0x22c
[cf8dfd70] [c008f1c4] vprintk_emit+0x94/0x270
[cf8dfda0] [c008fb60] printk+0x5c/0x6c
[cf8dfde0] [c0bd1ec0] of_unittest+0x2670/0x2b48
[cf8dfe80] [c0004ba8] do_one_initcall+0xac/0x320
[cf8dfee0] [c0b8975c] kernel_init_freeable+0x328/0x3f0
[cf8dff30] [c00050c4] kernel_init+0x24/0x118
[cf8dff40] [c0014278] ret_from_kernel_thread+0x14/0x1c

To avoid this and similar problems, don't try to dereference args.np after devicetree parse failures, and display the name of the parsed node instead. With this, we get error messages such as

dt-test ### FAIL of_unittest_parse_interrupts():791 index 0 -
data error on node /testcase-data/interrupts/interrupts0 rc=-22

This may not display the intended node name, but it is better than a crash.

Fixes 53a42093d96ef ("of: Add device tree selftests")
---
 drivers/of/unittest.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/of/unittest.c +6 -6
index 722537e14848..5942ddce1b9f 100644
@@ -424,7 +424,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
 		}
 
 		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
 	}
 
 	/* Check for missing list property */
@@ -554,8 +554,8 @@ static void __init of_unittest_parse_phandle_with_args_map(void)
 			passed = false;
 		}
 
-		unittest(passed, "index %i - data error on node %s rc=%i\n",
-			 i, args.np->full_name, rc);
+		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
+			 i, np, rc);
 	}
 
 	/* Check for missing list property */
@@ -788,7 +788,7 @@ static void __init of_unittest_parse_interrupts(void)
 		passed &= (args.args[0] == (i + 1));
 
 		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
 	}
 	of_node_put(np);
 
@@ -834,7 +834,7 @@ static void __init of_unittest_parse_interrupts(void)
 			passed = false;
 		}
 		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
 	}
 	of_node_put(np);
 }
@@ -904,7 +904,7 @@ static void __init of_unittest_parse_interrupts_extended(void)
 		}
 
 		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
 	}
 	of_node_put(np);
 }
Signature · 1 line
2.7.4
#1 lore raw

Hi Guenter,

Quoted 41 lines · Guenter Roeck

If a devicetree parse function fails, it is quite likely that args.np is invalid. Trying to dereference it will then cause the system to crash.

This was seen when trying to run devicetree unittests on a g3beige qemu system. This system has the OF_IMAP_OLDWORLD_MAC flag set in of_irq_workarounds and expects an 'old style' structure of irq nodes. Trying to parse the test nodes fails and results in the following crash.

OF: /testcase-data/phandle-tests/consumer-b: arguments longer than property

Unable to handle kernel paging request for data at address 0x00bc616e
Faulting instruction address: 0xc092437c
Oops: Kernel access of bad area, sig: 11 [#1]
BE PREEMPT PowerMac
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc4-yocto-standard+ #1
NIP:  c092437c LR: c0925098 CTR: c0925088
REGS: cf8dfb40 TRAP: 0300   Not tainted  (4.19.0-rc4-yocto-standard+)
MSR:  00001032 <ME,IR,DR,RI>  CR: 82004044  XER: 00000000
DAR: 00bc616e DSISR: 40000000

GPR00: c0925098 cf8dfbf0 cf8e0000 c14098c7 c14098c7 c1409c50 00000066 00000002
GPR08: 00000063 00bc614e c0b483e9 000affff 82004048 00000000 00000008 c0b36d80
GPR16: c0ac0000 c0b4233c c14098c7 c0b13c14 05ffffff 000affff c0b483e4 c0b00a30
GPR24: cecfe324 cecfe324 c0acc434 c0ac8420 c1409c50 05ffffff c1409c50 c14098c7 NIP [c092437c] device_node_gen_full_name+0x30/0x15c
LR [c0925098] device_node_string+0x190/0x3c8

Call Trace:
[cf8dfbf0] [c0733704] of_find_property+0x5c/0x74 (unreliable)
[cf8dfc30] [c0925098] device_node_string+0x190/0x3c8
[cf8dfca0] [c092690c] pointer+0x274/0x4d4
[cf8dfcd0] [c0926e20] vsnprintf+0x2b4/0x5ec
[cf8dfd30] [c0927170] vscnprintf+0x18/0x48
[cf8dfd40] [c008eb70] vprintk_store+0x4c/0x22c
[cf8dfd70] [c008f1c4] vprintk_emit+0x94/0x270
[cf8dfda0] [c008fb60] printk+0x5c/0x6c
[cf8dfde0] [c0bd1ec0] of_unittest+0x2670/0x2b48
[cf8dfe80] [c0004ba8] do_one_initcall+0xac/0x320
[cf8dfee0] [c0b8975c] kernel_init_freeable+0x328/0x3f0
[cf8dff30] [c00050c4] kernel_init+0x24/0x118
[cf8dff40] [c0014278] ret_from_kernel_thread+0x14/0x1c
Quoted 8 lines

To avoid this and similar problems, don't try to dereference args.np after devicetree parse failures, and display the name of the parsed node instead. With this, we get error messages such as

dt-test ### FAIL of_unittest_parse_interrupts():791 index 0 -
data error on node /testcase-data/interrupts/interrupts0 rc=-22

This may not display the intended node name, but it is better than a crash.

Thanks for finding and debugging the root cause of the problem.

As the patch comment notes, the changes do not fix the root cause, but instead avoid the crash. I'd like to deal with the root cause instead.

I've never encountered OF_IMAP_OLDWORLD_MAC and need to dig deeper to understand exactly how having it set leads to the error returns from of_parse_phandle_with_args(). Thus my off-the-top-of-my-head first observation is likely to be incorrect. But I'd like to point out what I suspect is likely to be a more useful direction for the fix.

I'll use a bit of artful logic to claim that the root cause is that of_parse_phandle_with_args() does not behave as unittests expect when OF_IMAP_OLDWORLD_MAC is set.

If the of_parse_phandle_with_args() calls are not going to perform the test that unittest expects to be performing, then it is pointless to do the tests. The fix then is to not do those tests. For example, at the top of of_unittest_parse_phandle_with_args(), simply do:

if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
return;

I did not look to see whether the other test areas you found can be as easily avoided, without avoiding tests that are still valid when OF_IMAP_OLDWORLD_MAC is set, but I am hoping so.

While looking at the patch, I noticed that the current of_unittest_parse_phandle_with_args() also does not call of_node_put() in the cases where of_count_phandle_with_args() does not return an error. I'll add fixing that to my todo list.

And as you pointed out, of_unittest_parse_phandle_with_args() should not be blindly using the contents of args when an error occurred. I'll also put fixing that on my todo list.

-Frank

Quoted 59 lines
Fixes 53a42093d96ef ("of: Add device tree selftests")
---
 drivers/of/unittest.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/of/unittest.c +6 -6
index 722537e14848..5942ddce1b9f 100644
@@ -424,7 +424,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
 		}
 
 		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
 	}
 
 	/* Check for missing list property */
@@ -554,8 +554,8 @@ static void __init of_unittest_parse_phandle_with_args_map(void)
 			passed = false;
 		}
 
-		unittest(passed, "index %i - data error on node %s rc=%i\n",
-			 i, args.np->full_name, rc);
+		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
+			 i, np, rc);
 	}
 
 	/* Check for missing list property */
@@ -788,7 +788,7 @@ static void __init of_unittest_parse_interrupts(void)
 		passed &= (args.args[0] == (i + 1));
 
 		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
 	}
 	of_node_put(np);
 
@@ -834,7 +834,7 @@ static void __init of_unittest_parse_interrupts(void)
 			passed = false;
 		}
 		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
 	}
 	of_node_put(np);
 }
@@ -904,7 +904,7 @@ static void __init of_unittest_parse_interrupts_extended(void)
 		}
 
 		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
 	}
 	of_node_put(np);
 }
#2 lore raw
Quoted 68 lines · Frank Rowand

Hi Guenter,

Quoted 41 lines · Guenter Roeck

If a devicetree parse function fails, it is quite likely that args.np is invalid. Trying to dereference it will then cause the system to crash.

This was seen when trying to run devicetree unittests on a g3beige qemu system. This system has the OF_IMAP_OLDWORLD_MAC flag set in of_irq_workarounds and expects an 'old style' structure of irq nodes. Trying to parse the test nodes fails and results in the following crash.

OF: /testcase-data/phandle-tests/consumer-b: arguments longer than property

Unable to handle kernel paging request for data at address 0x00bc616e
Faulting instruction address: 0xc092437c
Oops: Kernel access of bad area, sig: 11 [#1]
BE PREEMPT PowerMac
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc4-yocto-standard+ #1
NIP:  c092437c LR: c0925098 CTR: c0925088
REGS: cf8dfb40 TRAP: 0300   Not tainted  (4.19.0-rc4-yocto-standard+)
MSR:  00001032 <ME,IR,DR,RI>  CR: 82004044  XER: 00000000
DAR: 00bc616e DSISR: 40000000

GPR00: c0925098 cf8dfbf0 cf8e0000 c14098c7 c14098c7 c1409c50 00000066 00000002
GPR08: 00000063 00bc614e c0b483e9 000affff 82004048 00000000 00000008 c0b36d80
GPR16: c0ac0000 c0b4233c c14098c7 c0b13c14 05ffffff 000affff c0b483e4 c0b00a30
GPR24: cecfe324 cecfe324 c0acc434 c0ac8420 c1409c50 05ffffff c1409c50 c14098c7 NIP [c092437c] device_node_gen_full_name+0x30/0x15c
LR [c0925098] device_node_string+0x190/0x3c8

Call Trace:
[cf8dfbf0] [c0733704] of_find_property+0x5c/0x74 (unreliable)
[cf8dfc30] [c0925098] device_node_string+0x190/0x3c8
[cf8dfca0] [c092690c] pointer+0x274/0x4d4
[cf8dfcd0] [c0926e20] vsnprintf+0x2b4/0x5ec
[cf8dfd30] [c0927170] vscnprintf+0x18/0x48
[cf8dfd40] [c008eb70] vprintk_store+0x4c/0x22c
[cf8dfd70] [c008f1c4] vprintk_emit+0x94/0x270
[cf8dfda0] [c008fb60] printk+0x5c/0x6c
[cf8dfde0] [c0bd1ec0] of_unittest+0x2670/0x2b48
[cf8dfe80] [c0004ba8] do_one_initcall+0xac/0x320
[cf8dfee0] [c0b8975c] kernel_init_freeable+0x328/0x3f0
[cf8dff30] [c00050c4] kernel_init+0x24/0x118
[cf8dff40] [c0014278] ret_from_kernel_thread+0x14/0x1c
Quoted 8 lines

To avoid this and similar problems, don't try to dereference args.np after devicetree parse failures, and display the name of the parsed node instead. With this, we get error messages such as

dt-test ### FAIL of_unittest_parse_interrupts():791 index 0 -
data error on node /testcase-data/interrupts/interrupts0 rc=-22

This may not display the intended node name, but it is better than a crash.

Thanks for finding and debugging the root cause of the problem.

As the patch comment notes, the changes do not fix the root cause, but instead avoid the crash. I'd like to deal with the root cause instead.

I've never encountered OF_IMAP_OLDWORLD_MAC and need to dig deeper to understand exactly how having it set leads to the error returns from of_parse_phandle_with_args(). Thus my off-the-top-of-my-head first observation is likely to be incorrect. But I'd like to point out what I suspect is likely to be a more useful direction for the fix.

I'll use a bit of artful logic to claim that the root cause is that of_parse_phandle_with_args() does not behave as unittests expect when OF_IMAP_OLDWORLD_MAC is set.

Quoted 7 lines

If the of_parse_phandle_with_args() calls are not going to perform the test that unittest expects to be performing, then it is pointless to do the tests. The fix then is to not do those tests. For example, at the top of of_unittest_parse_phandle_with_args(), simply do:

if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
return;

I forgot to mention another rationale for this approach. This will result in the number of failed tests to remain at zero.

-Frank

Quoted 78 lines

I did not look to see whether the other test areas you found can be as easily avoided, without avoiding tests that are still valid when OF_IMAP_OLDWORLD_MAC is set, but I am hoping so.

While looking at the patch, I noticed that the current of_unittest_parse_phandle_with_args() also does not call of_node_put() in the cases where of_count_phandle_with_args() does not return an error. I'll add fixing that to my todo list.

And as you pointed out, of_unittest_parse_phandle_with_args() should not be blindly using the contents of args when an error occurred. I'll also put fixing that on my todo list.

-Frank

Quoted 59 lines
Fixes 53a42093d96ef ("of: Add device tree selftests")
---
 drivers/of/unittest.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/of/unittest.c +6 -6
index 722537e14848..5942ddce1b9f 100644
@@ -424,7 +424,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
 		}
 
 		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
 	}
 
 	/* Check for missing list property */
@@ -554,8 +554,8 @@ static void __init of_unittest_parse_phandle_with_args_map(void)
 			passed = false;
 		}
 
-		unittest(passed, "index %i - data error on node %s rc=%i\n",
-			 i, args.np->full_name, rc);
+		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
+			 i, np, rc);
 	}
 
 	/* Check for missing list property */
@@ -788,7 +788,7 @@ static void __init of_unittest_parse_interrupts(void)
 		passed &= (args.args[0] == (i + 1));
 
 		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
 	}
 	of_node_put(np);
 
@@ -834,7 +834,7 @@ static void __init of_unittest_parse_interrupts(void)
 			passed = false;
 		}
 		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
 	}
 	of_node_put(np);
 }
@@ -904,7 +904,7 @@ static void __init of_unittest_parse_interrupts_extended(void)
 		}
 
 		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
 	}
 	of_node_put(np);
 }
#3 lore raw
In reply to Frank Rowand

Hi Frank,

Quoted 68 lines · Frank Rowand

Hi Guenter,

Quoted 41 lines · Guenter Roeck

If a devicetree parse function fails, it is quite likely that args.np is invalid. Trying to dereference it will then cause the system to crash.

This was seen when trying to run devicetree unittests on a g3beige qemu system. This system has the OF_IMAP_OLDWORLD_MAC flag set in of_irq_workarounds and expects an 'old style' structure of irq nodes. Trying to parse the test nodes fails and results in the following crash.

OF: /testcase-data/phandle-tests/consumer-b: arguments longer than property

Unable to handle kernel paging request for data at address 0x00bc616e
Faulting instruction address: 0xc092437c
Oops: Kernel access of bad area, sig: 11 [#1]
BE PREEMPT PowerMac
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc4-yocto-standard+ #1
NIP:  c092437c LR: c0925098 CTR: c0925088
REGS: cf8dfb40 TRAP: 0300   Not tainted  (4.19.0-rc4-yocto-standard+)
MSR:  00001032 <ME,IR,DR,RI>  CR: 82004044  XER: 00000000
DAR: 00bc616e DSISR: 40000000

GPR00: c0925098 cf8dfbf0 cf8e0000 c14098c7 c14098c7 c1409c50 00000066 00000002
GPR08: 00000063 00bc614e c0b483e9 000affff 82004048 00000000 00000008 c0b36d80
GPR16: c0ac0000 c0b4233c c14098c7 c0b13c14 05ffffff 000affff c0b483e4 c0b00a30
GPR24: cecfe324 cecfe324 c0acc434 c0ac8420 c1409c50 05ffffff c1409c50 c14098c7 NIP [c092437c] device_node_gen_full_name+0x30/0x15c
LR [c0925098] device_node_string+0x190/0x3c8

Call Trace:
[cf8dfbf0] [c0733704] of_find_property+0x5c/0x74 (unreliable)
[cf8dfc30] [c0925098] device_node_string+0x190/0x3c8
[cf8dfca0] [c092690c] pointer+0x274/0x4d4
[cf8dfcd0] [c0926e20] vsnprintf+0x2b4/0x5ec
[cf8dfd30] [c0927170] vscnprintf+0x18/0x48
[cf8dfd40] [c008eb70] vprintk_store+0x4c/0x22c
[cf8dfd70] [c008f1c4] vprintk_emit+0x94/0x270
[cf8dfda0] [c008fb60] printk+0x5c/0x6c
[cf8dfde0] [c0bd1ec0] of_unittest+0x2670/0x2b48
[cf8dfe80] [c0004ba8] do_one_initcall+0xac/0x320
[cf8dfee0] [c0b8975c] kernel_init_freeable+0x328/0x3f0
[cf8dff30] [c00050c4] kernel_init+0x24/0x118
[cf8dff40] [c0014278] ret_from_kernel_thread+0x14/0x1c
Quoted 8 lines

To avoid this and similar problems, don't try to dereference args.np after devicetree parse failures, and display the name of the parsed node instead. With this, we get error messages such as

dt-test ### FAIL of_unittest_parse_interrupts():791 index 0 -
data error on node /testcase-data/interrupts/interrupts0 rc=-22

This may not display the intended node name, but it is better than a crash.

Thanks for finding and debugging the root cause of the problem.

As the patch comment notes, the changes do not fix the root cause, but instead avoid the crash. I'd like to deal with the root cause instead.

I've never encountered OF_IMAP_OLDWORLD_MAC and need to dig deeper to understand exactly how having it set leads to the error returns from of_parse_phandle_with_args(). Thus my off-the-top-of-my-head first observation is likely to be incorrect. But I'd like to point out what I suspect is likely to be a more useful direction for the fix.

I'll use a bit of artful logic to claim that the root cause is that of_parse_phandle_with_args() does not behave as unittests expect when OF_IMAP_OLDWORLD_MAC is set.

Quoted 8 lines

If the of_parse_phandle_with_args() calls are not going to perform the test that unittest expects to be performing, then it is pointless to do the tests. The fix then is to not do those tests. For example, at the top of of_unittest_parse_phandle_with_args(), simply do:

if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
return;

I thought about submitting that as second patch, but wanted to wait for feedback before doing that. I'll be more than happy to drop this patch and replace it with the above.

Quoted 4 lines

I did not look to see whether the other test areas you found can be as easily avoided, without avoiding tests that are still valid when OF_IMAP_OLDWORLD_MAC is set, but I am hoping so.

Quoted 9 lines

While looking at the patch, I noticed that the current of_unittest_parse_phandle_with_args() also does not call of_node_put() in the cases where of_count_phandle_with_args() does not return an error. I'll add fixing that to my todo list.

And as you pointed out, of_unittest_parse_phandle_with_args() should not be blindly using the contents of args when an error occurred. I'll also put fixing that on my todo list.

That was the intent of this patch, but I'll be happy to leave it up to you to find a better solution. I did not check if there are situations where args.np is still usable, or if it makes a difference if args.np is preinitialized with NULL, so it might well be that a better fix is possible.

Thanks,
Guenter

Quoted 65 lines

-Frank

Quoted 59 lines
Fixes 53a42093d96ef ("of: Add device tree selftests")
---
  drivers/of/unittest.c | 12 ++++++------
  1 file changed, 6 insertions(+), 6 deletions(-)
drivers/of/unittest.c +6 -6
index 722537e14848..5942ddce1b9f 100644
@@ -424,7 +424,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
  		}
 
  		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
  	}
 
  	/* Check for missing list property */
@@ -554,8 +554,8 @@ static void __init of_unittest_parse_phandle_with_args_map(void)
  			passed = false;
  		}
 
-		unittest(passed, "index %i - data error on node %s rc=%i\n",
-			 i, args.np->full_name, rc);
+		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
+			 i, np, rc);
  	}
 
  	/* Check for missing list property */
@@ -788,7 +788,7 @@ static void __init of_unittest_parse_interrupts(void)
  		passed &= (args.args[0] == (i + 1));
 
  		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
  	}
  	of_node_put(np);
 
@@ -834,7 +834,7 @@ static void __init of_unittest_parse_interrupts(void)
  			passed = false;
  		}
  		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
  	}
  	of_node_put(np);
  }
@@ -904,7 +904,7 @@ static void __init of_unittest_parse_interrupts_extended(void)
  		}
 
  		unittest(passed, "index %i - data error on node %pOF rc=%i\n",
-			 i, args.np, rc);
+			 i, np, rc);
  	}
  	of_node_put(np);
  }