Skip to contentSkip to conversation

ath10k: Add support for configuring management packet rate

PATCH In review Sriram R 2 participants 5 messages Sep 25, 2018 – Oct 3, 2018 1 message not in the archive Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore

Sriram R

author
#0 lore raw

PATCH v2 1/1 ath10k: Add support for configuring management packet rate

By default the firmware uses 1Mbps and 6Mbps rate for management packets in 2G and 5G bands respectively. But when the user selects different basic rates from the userspace, we need to send the management packets at the lowest basic rate selected by the user.

This change makes use of WMI_VDEV_PARAM_MGMT_RATE param for configuring the management packets rate to the firmware.

Chipsets Tested : QCA988X, QCA9887, QCA9984
FW Tested : 10.2.4-1.0-41, 10.4-3.6.104

---
v2:
* Correction to ath10k_rates array indexing.
* Usage of appropriate indent.

 drivers/net/wireless/ath/ath10k/mac.c | 45 +++++++++++++++++++++++++++++++++--
 1 file changed, 43 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath10k/mac.c +43 -2
index 97548f9..c0cde94 100644
@@ -157,6 +157,22 @@ u8 ath10k_mac_bitrate_to_idx(const struct ieee80211_supported_band *sband,
 	return 0;
 }
 
+static int ath10k_mac_get_rate_hw_value(int bitrate)
+{
+	int i;
+	u8 hw_value_prefix = 0;
+
+	if (ath10k_mac_bitrate_is_cck(bitrate))
+		hw_value_prefix = WMI_RATE_PREAMBLE_CCK << 6;
+
+	for (i = 0; i < ARRAY_SIZE(ath10k_rates); i++) {
+		if (ath10k_rates[i].bitrate == bitrate)
+			return hw_value_prefix | ath10k_rates[i].hw_value;
+	}
+
+	return -EINVAL;
+}
+
 static int ath10k_mac_get_max_vht_mcs_map(u16 mcs_map, int nss)
 {
 	switch ((mcs_map >> (2 * nss)) & 0x3) {
@@ -5452,9 +5468,10 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 	struct cfg80211_chan_def def;
 	u32 vdev_param, pdev_param, slottime, preamble;
 	u16 bitrate, hw_value;
-	u8 rate;
-	int rateidx, ret = 0;
+	u8 rate, basic_rate_idx;
+	int rateidx, ret = 0, hw_rate_code;
 	enum nl80211_band band;
+	const struct ieee80211_supported_band *sband;
 
 	mutex_lock(&ar->conf_mutex);
 
@@ -5660,6 +5677,30 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 				    arvif->vdev_id,  ret);
 	}
 
+	if (changed & BSS_CHANGED_BASIC_RATES) {
+		if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) {
+			mutex_unlock(&ar->conf_mutex);
+			return;
+		}
+
+		sband = ar->hw->wiphy->bands[def.chan->band];
+		basic_rate_idx = ffs(vif->bss_conf.basic_rates) - 1;
+		bitrate = sband->bitrates[basic_rate_idx].bitrate;
+
+		hw_rate_code = ath10k_mac_get_rate_hw_value(bitrate);
+		if (hw_rate_code < 0) {
+			ath10k_warn(ar, "bitrate not supported %d\n", bitrate);
+			mutex_unlock(&ar->conf_mutex);
+			return;
+		}
+
+		vdev_param = ar->wmi.vdev_param->mgmt_rate;
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+						hw_rate_code);
+		if (ret)
+			ath10k_warn(ar, "failed to set mgmt tx rate %d\n", ret);
+	}
+
 	mutex_unlock(&ar->conf_mutex);
 }
 
Signature · 1 line
2.7.4
#1 lore raw
Quoted 5 lines · Sriram R

By default the firmware uses 1Mbps and 6Mbps rate for management packets in 2G and 5G bands respectively. But when the user selects different basic rates from the userspace, we need to send the management packets at the lowest basic rate selected by the user.

Quoted 7 lines

This change makes use of WMI_VDEV_PARAM_MGMT_RATE param for configuring the management packets rate to the firmware.

Chipsets Tested : QCA988X, QCA9887, QCA9984
FW Tested : 10.2.4-1.0-41, 10.4-3.6.104

Really sorry, I missed this and accidentally applied v1. Can you submit a followup patch with the changes you made in v2, please? That way the final code is still the same.

Signature · 3 lines
https://patchwork.kernel.org/patch/10613355/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
#2 lore raw
In reply to Sriram R
Quoted 5 lines · Sriram R

By default the firmware uses 1Mbps and 6Mbps rate for management packets in 2G and 5G bands respectively. But when the user selects different basic rates from the userspace, we need to send the management packets at the lowest basic rate selected by the user.

Quoted 7 lines

This change makes use of WMI_VDEV_PARAM_MGMT_RATE param for configuring the management packets rate to the firmware.

Chipsets Tested : QCA988X, QCA9887, QCA9984
FW Tested : 10.2.4-1.0-41, 10.4-3.6.104

Really sorry, I missed this and accidentally applied v1. Can you submit a followup patch with the changes you made in v2, please? That way the final code is still the same.

Signature · 9 lines
https://patchwork.kernel.org/patch/10613355/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

A message that is not in the archive (sent off-list or not yet received): [email protected]

author
#4 lore raw
Quoted 13 lines · Kalle Valo
Quoted 11 lines · Sriram R

By default the firmware uses 1Mbps and 6Mbps rate for management packets in 2G and 5G bands respectively. But when the user selects different basic rates from the userspace, we need to send the management packets at the lowest basic rate selected by the user.

This change makes use of WMI_VDEV_PARAM_MGMT_RATE param for configuring the management packets rate to the firmware.

Chipsets Tested : QCA988X, QCA9887, QCA9984
FW Tested : 10.2.4-1.0-41, 10.4-3.6.104

Quoted 6 lines
Quoted 1 line

Really sorry, I missed this and accidentally applied v1. Can you submit a followup
patch with the changes you made in v2, please? That way the final code is still the same.

Hi Kalle,
I've raised a followup patch with the delta in v2.

       https://patchwork.kernel.org/patch/10624227/

Thanks,
Sriram.R

#5 lore raw
Quoted 18 lines · Sriram R
Quoted 17 lines · Kalle Valo
Quoted 14 lines · Sriram R

By default the firmware uses 1Mbps and 6Mbps rate for management packets
in 2G and 5G bands respectively. But when the user selects different basic rates from the userspace, we need to send the management packets at the lowest basic rate selected by the user.

This change makes use of WMI_VDEV_PARAM_MGMT_RATE param for configuring the
management packets rate to the firmware.

Chipsets Tested : QCA988X, QCA9887, QCA9984
FW Tested : 10.2.4-1.0-41, 10.4-3.6.104

Quoted 8 lines
Quoted 5 lines

Really sorry, I missed this and accidentally applied v1. Can you submit a followup
patch with the changes you made in v2, please? That way the final code is still
the same.

I've raised a followup patch with the delta in v2.

       https://patchwork.kernel.org/patch/10624227/

Great, thanks for this and sorry for the mess.

Signature · 1 line
Kalle Valo