ARM: dts: vf610: Add ZII SCU4 AIB board
PATCH v2 1/1 ARM: dts: vf610: Add ZII SCU4 AIB board
Add support for the ZII SCU 4 board, which has lots of switches and SFF ports.
Based on the work from Andrew Lunn.
Signed-off-by Fabio Estevam <[email protected]>
---
Changes since v1:
- Based on the correct dts from Andrew Lunn
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 837 +++++++++++++++++++++++++++++++ 2 files changed, 838 insertions(+) create mode 100644 arch/arm/boot/dts/vf610-zii-scu4-aib.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -588,6 +588,7 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610-zii-cfu1.dtb \ vf610-zii-dev-rev-b.dtb \ vf610-zii-dev-rev-c.dtb \ + vf610-zii-scu4-aib.dtb \ vf610-zii-ssmb-spu3.dtb dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \
arch/arm/boot/dts/vf610-zii-scu4-aib.dts new file +837 -0
837 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v2 1/1 ARM: dts: vf610: Add ZII SCU4 AIB board
Quoted 5 lines
Add support for the ZII SCU 4 board, which has lots of switches and SFF ports.
Based on the work from Andrew Lunn.
Quoted 7 lines
Signed-off-by Fabio Estevam <[email protected]>---
Changes since v1:
- Based on the correct dts from Andrew Lunnarch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 837 +++++++++++++++++++++++++++++++
Reviewed-by Chris Healy <[email protected]>
Shawn Guo
AppliedPATCH v2 1/1 ARM: dts: vf610: Add ZII SCU4 AIB board
In reply to Fabio EstevamQuoted 6 lines · Fabio Estevam
Add support for the ZII SCU 4 board, which has lots of switches and SFF ports.
Based on the work from Andrew Lunn.
Signed-off-by Fabio Estevam <[email protected]>
Applied, thanks.