Add Mediatek SPI slave driver
Subsystems (3)
v5 cover Add Mediatek SPI slave driver
Quoted 1 line
From
5479c692171dc52990290d88c505c074fa4db7d4Mon Sep 17 00:00:00 2001
From: Leilk Liu <[email protected]>
Date: Fri, 28 Sep 2018 18:37:40 +0800
Subject: [PATCH v5 0/3] Add Mediatek SPI slave driver
v5:
1. Fix typos in bindings file.
v4:
1. Fix Mark Brown review comment about kconfig & driver.
v3:
1. Fix Rob Herring review comment about bindings.
2. remove unused variables in driver.
v2:
1. Fix Sean Wang review comment.
2. remove unused register and offset define.
3. update bindings file with assigned-clocks and assigned-clocks-parents.
v1:
This series are based on 4.19-rc1 and provide three patches to add mediatek spi slave driver.
Leilk Liu (3):
spi: mediatek: add bindings for Mediatek MT2712 soc platform
spi: mediatek: add spi slave for Mediatek MT2712
arm64: dts: Add spi slave dts
.../devicetree/bindings/spi/spi-slave-mt27xx.txt | 32 ++ arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 11 + drivers/spi/Kconfig | 10 + drivers/spi/Makefile | 1 + drivers/spi/spi-slave-mt27xx.c | 554 +++++++++++++++++++++ 5 files changed, 608 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt create mode 100644 drivers/spi/spi-slave-mt27xx.c
Signature · 1 line
1.9.1
PATCH v5 1/3 spi: mediatek: add bindings for Mediatek MT2712 soc platform
This patch adds a DT binding documentation for the MT2712 soc.
--- .../devicetree/bindings/spi/spi-slave-mt27xx.txt | 32 ++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt
Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt new file +32 -0
@@ -0,0 +1,32 @@ +Binding for MTK SPI Slave controller + +Required properties: +- compatible: should be one of the following. + - mediatek,mt2712-spi-slave: for mt2712 platforms +- reg: Address and length of the register set for the device. +- interrupts: Should contain spi interrupt. +- clocks: phandles to input clocks. + It's clock gate, and should be <&infracfg CLK_INFRA_AO_SPI1>. +- clock-names: should be "spi" for the clock gate. + +Optional properties: +- assigned-clocks: it's mux clock, should be <&topckgen CLK_TOP_SPISLV_SEL>. +- assigned-clock-parents: parent of mux clock. + It's PLL, and should be one of the following. + - <&topckgen CLK_TOP_UNIVPLL1_D2>: specify parent clock 312MHZ. + It's the default one. + - <&topckgen CLK_TOP_UNIVPLL1_D4>: specify parent clock 156MHZ. + - <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ. + - <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ. + +Example: +- SoC Specific Portion: +spis1: spi at 10013000 { + compatible = "mediatek,mt2712-spi-slave"; + reg = <0 0x10013000 0 0x100>; + interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_AO_SPI1>; + clock-names = "spi"; + assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>; +};
Signature · 1 line
1.7.9.5
Mark Brown
maintainerApplied "spi: mediatek: add bindings for Mediatek MT2712 soc platform" to the spi tree
The patch
spi: mediatek: add bindings for Mediatek MT2712 soc platform
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
c0116e6b30473c7a75d33077bfd60f3b4eec7808Mon Sep 17 00:00:00 2001
From: Leilk Liu <[email protected]>
Date: Fri, 28 Sep 2018 18:53:03 +0800
Subject: [PATCH] spi: mediatek: add bindings for Mediatek MT2712 soc platform
This patch adds a DT binding documentation for the MT2712 soc.
--- .../bindings/spi/spi-slave-mt27xx.txt | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt
Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt new file +32 -0
@@ -0,0 +1,32 @@ +Binding for MTK SPI Slave controller + +Required properties: +- compatible: should be one of the following. + - mediatek,mt2712-spi-slave: for mt2712 platforms +- reg: Address and length of the register set for the device. +- interrupts: Should contain spi interrupt. +- clocks: phandles to input clocks. + It's clock gate, and should be <&infracfg CLK_INFRA_AO_SPI1>. +- clock-names: should be "spi" for the clock gate. + +Optional properties: +- assigned-clocks: it's mux clock, should be <&topckgen CLK_TOP_SPISLV_SEL>. +- assigned-clock-parents: parent of mux clock. + It's PLL, and should be one of the following. + - <&topckgen CLK_TOP_UNIVPLL1_D2>: specify parent clock 312MHZ. + It's the default one. + - <&topckgen CLK_TOP_UNIVPLL1_D4>: specify parent clock 156MHZ. + - <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ. + - <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ. + +Example: +- SoC Specific Portion: +spis1: spi at 10013000 { + compatible = "mediatek,mt2712-spi-slave"; + reg = <0 0x10013000 0 0x100>; + interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_AO_SPI1>; + clock-names = "spi"; + assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>; +};
Signature · 1 line
2.19.0
PATCH v5 2/3 spi: mediatek: add spi slave for Mediatek MT2712
In reply to Leilk LiuThis patch adds basic spi slave for MT2712.
--- drivers/spi/Kconfig | 10 + drivers/spi/Makefile | 1 + drivers/spi/spi-slave-mt27xx.c | 554 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 565 insertions(+) create mode 100644 drivers/spi/spi-slave-mt27xx.c
drivers/spi/Kconfig +10 -0
@@ -596,6 +596,16 @@ config SPI_SIRF help SPI driver for CSR SiRFprimaII SoCs +config SPI_SLAVE_MT27XX + tristate "MediaTek SPI slave device" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on SPI_SLAVE + help + This selects the MediaTek(R) SPI slave device driver. + If you want to use MediaTek(R) SPI slave interface, + say Y or M here.If you are not sure, say N. + SPI slave drivers for Mediatek MT27XX series ARM SoCs. + config SPI_SPRD_ADI tristate "Spreadtrum ADI controller" depends on ARCH_SPRD || COMPILE_TEST
drivers/spi/Makefile +1 -0
@@ -88,6 +88,7 @@ obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o obj-$(CONFIG_SPI_SIRF) += spi-sirf.o +obj-$(CONFIG_SPI_SLAVE_MT27XX) += spi-slave-mt27xx.o obj-$(CONFIG_SPI_SPRD_ADI) += spi-sprd-adi.o obj-$(CONFIG_SPI_STM32) += spi-stm32.o obj-$(CONFIG_SPI_ST_SSC4) += spi-st-ssc4.o
drivers/spi/spi-slave-mt27xx.c new file +554 -0
554 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v5 3/3 arm64: dts: Add spi slave dts
In reply to Leilk LiuThis patch adds MT2712 spi slave into device tree.
--- arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)
arch/arm64/boot/dts/mediatek/mt2712e.dtsi +11 -0
@@ -301,6 +301,17 @@ status = "disabled"; }; + spis1: spi at 10013000 { + compatible = "mediatek,mt2712-spi-slave"; + reg = <0 0x10013000 0 0x100>; + interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_AO_SPI1>; + clock-names = "spi"; + assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>; + status = "disabled"; + }; + apmixedsys: syscon at 10209000 { compatible = "mediatek,mt2712-apmixedsys", "syscon"; reg = <0 0x10209000 0 0x1000>;
Signature · 1 line
1.7.9.5
Re: [PATCH v5 3/3] arm64: dts: Add spi slave dts
Quoted 4 lines · Leilk Liu
This patch adds MT2712 spi slave into device tree.
Signed-off-by Leilk Liu <[email protected]>---
Pushed to v4.19-next/dts64
Thanks!
Quoted 26 lines
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)arch/arm64/boot/dts/mediatek/mt2712e.dtsi +11
-0@@ -301,6 +301,17 @@ status = "disabled"; }; + spis1: spi at 10013000 { + compatible = "mediatek,mt2712-spi-slave"; + reg = <0 0x10013000 0 0x100>; + interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_AO_SPI1>; + clock-names = "spi"; + assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>; + status = "disabled"; + }; + apmixedsys: syscon at 10209000 { compatible = "mediatek,mt2712-apmixedsys", "syscon"; reg = <0 0x10209000 0 0x1000>;