tests: Add migration test for aarch64
PATCH v2 1/1 tests: Add migration test for aarch64
This patch adds migration test support for aarch64. The test code, which implements the same functionality as x86, is booted as a kernel in qemu. Here are the design choices we make for aarch64:
* We choose this -kernel approach because aarch64 QEMU doesn't provide a built-in fw like x86 does. So instead of relying on a boot loader, we use -kernel approach for aarch64.
* The serial output is sent to PL011 directly.
* The physical memory base for mach-virt machine is 0x40000000. We change the start_address and end_address for aarch64.
In addition to providing the binary, this patch also includes the source code and the build script in tests/migration/aarch64. So users can change the source and/or re-compile the binary as they wish.
--- tests/Makefile.include | 1 + tests/migration-test.c | 27 +++++++++++-- tests/migration/Makefile | 2 +- tests/migration/aarch64/Makefile | 19 +++++++++ tests/migration/aarch64/a-b-kernel.S | 75 ++++++++++++++++++++++++++++++++++++ tests/migration/aarch64/a-b-kernel.h | 19 +++++++++ tests/migration/migration-test.h | 9 +++++ 7 files changed, 147 insertions(+), 5 deletions(-) create mode 100644 tests/migration/aarch64/Makefile create mode 100644 tests/migration/aarch64/a-b-kernel.S create mode 100644 tests/migration/aarch64/a-b-kernel.h
tests/Makefile.include +1 -0
@@ -402,6 +402,7 @@ check-qtest-arm-y += tests/hexloader-test$(EXESUF) check-qtest-aarch64-y = tests/numa-test$(EXESUF) check-qtest-aarch64-$(CONFIG_SDHCI) += tests/sdhci-test$(EXESUF) check-qtest-aarch64-y += tests/boot-serial-test$(EXESUF) +check-qtest-aarch64-y += tests/migration-test$(EXESUF) check-qtest-microblazeel-y = $(check-qtest-microblaze-y)
tests/migration-test.c +23 -4
@@ -86,12 +86,13 @@ static const char *tmpfs;* repeatedly. It outputs a 'B' at a fixed rate while it's still running. */ #include "tests/migration/i386/a-b-bootblock.h" +#include "tests/migration/aarch64/a-b-kernel.h" -static void init_bootfile_x86 (const char *bootpath) +static void init_bootfile (const char *bootpath,void *content) {FILE *bootfile =fopen (bootpath,"wb" ); - g_assert_cmpint(fwrite(x86_bootsect, 512, 1, bootfile), ==, 1); + g_assert_cmpint(fwrite(content, 512, 1, bootfile), ==, 1);fclose (bootfile); }
@@ -428,7 +429,7 @@ static int test_migrate_start(QTestState **from, QTestState **to, got_stop = false;if (strcmp (arch,"i386" ) ==0 ||strcmp (arch,"x86_64" ) ==0 ) { -init_bootfile_x86 (bootpath); +init_bootfile (bootpath, x86_bootsect); cmd_src =g_strdup_printf ("-machine accel=%s -m 150M" " -name source,debug-threads=on" " -serial file:%s/src_serial"
@@ -459,6 +460,24 @@ static int test_migrate_start(QTestState **from, QTestState **to, start_address =PPC_TEST_MEM_START ; end_address =PPC_TEST_MEM_END ; + }else if (strcmp (arch,"aarch64" ) ==0 ) { +init_bootfile (bootpath, aarch64_kernel); + cmd_src =g_strdup_printf ("-machine virt,accel=%s,gic-version=max " +"-name vmsource,debug-threads=on -cpu max " +"-m 150M -serial file:%s/src_serial " +"-kernel %s " , + accel, tmpfs, bootpath); + cmd_dst =g_strdup_printf ("-machine virt,accel=%s,gic-version=max " +"-name vmdest,debug-threads=on -cpu max " +"-m 150M -serial file:%s/dest_serial " +"-kernel %s " +"-incoming %s " , + accel, tmpfs, bootpath, uri); + + start_address =ARM_TEST_MEM_START ; + end_address =ARM_TEST_MEM_END ; + +g_assert (sizeof (aarch64_kernel) <=ARM_TEST_MAX_KERNEL_SIZE ); }else {g_assert_not_reached (); }
@@ -545,7 +564,7 @@ static void test_deprecated(void) {QTestState *from; - from =qtest_start ("" ); + from =qtest_start ("-machine none" );deprecated_set_downtime (from,0.12345 );deprecated_set_speed (from,12345 );
tests/migration/Makefile +1 -1
@@ -5,7 +5,7 @@ # See the COPYING file in the top-level directory. # -TARGET_LIST = i386 +TARGET_LIST = i386 aarch64 SRC_PATH = ../..
tests/migration/aarch64/Makefile new file +19 -0
@@ -0,0 +1,19 @@ +# To specify cross compiler prefix, use CROSS_PREFIX= +# $ make CROSS_PREFIX=aarch64-linux-gnu- + +.PHONY: all clean +all: a-b-kernel.h + +a-b-kernel.h: aarch64.kernel + echo "$$__note" > $@ + xxd -i $< | sed -e 's/.*int.*//' >> $@ + +aarch64.kernel: aarch64.elf + $(CROSS_PREFIX)objcopy -O binary $< $@ + +aarch64.elf: a-b-kernel.S + $(CROSS_PREFIX)gcc -o $@ -nostdlib -Wl,--build-id=none $< + +clean: + $(RM) *.kernel *.elf +
tests/migration/aarch64/a-b-kernel.S new file +75 -0
75 lines not on this page · raw message
tests/migration/aarch64/a-b-kernel.h new file +19 -0
@@ -0,0 +1,19 @@ +/* This file is automatically generated from the assembly file in +* tests/migration/aarch64. Edit that file and then run "make all" +* inside tests/migration to update, and then remember to send both +* the header and the assembler differences in your patch submission. +*/ +unsigned char aarch64_kernel[] = { +0x00 ,0x10 ,0x38 ,0xd5 ,0x00 ,0xf8 ,0x7f ,0x92 ,0x00 ,0x10 ,0x18 ,0xd5 , +0xdf ,0x3f ,0x03 ,0xd5 ,0x00 ,0x02 ,0xa8 ,0xd2 ,0x01 ,0xc8 ,0xa8 ,0xd2 , +0x23 ,0x08 ,0x80 ,0x52 ,0x02 ,0x20 ,0xa1 ,0xd2 ,0x43 ,0x00 ,0x00 ,0x39 , +0x03 ,0x00 ,0x80 ,0x52 ,0xe4 ,0x03 ,0x00 ,0xaa ,0x83 ,0x00 ,0x00 ,0x39 , +0x84 ,0x04 ,0x40 ,0x91 ,0x9f ,0x00 ,0x01 ,0xeb ,0xad ,0xff ,0xff ,0x54 , +0x05 ,0x00 ,0x80 ,0x52 ,0xe4 ,0x03 ,0x00 ,0xaa ,0x83 ,0x00 ,0x40 ,0x39 , +0x63 ,0x04 ,0x00 ,0x11 ,0x63 ,0x1c ,0x00 ,0x12 ,0x83 ,0x00 ,0x00 ,0x39 , +0x24 ,0x7e ,0x0b ,0xd5 ,0x84 ,0x04 ,0x40 ,0x91 ,0x9f ,0x00 ,0x01 ,0xeb , +0x2b ,0xff ,0xff ,0x54 ,0xa5 ,0x04 ,0x00 ,0x11 ,0xa5 ,0x1c ,0x00 ,0x12 , +0xbf ,0x00 ,0x00 ,0x71 ,0x81 ,0xfe ,0xff ,0x54 ,0x43 ,0x08 ,0x80 ,0x52 , +0x43 ,0x00 ,0x00 ,0x39 ,0xf1 ,0xff ,0xff ,0x17 +}; +
tests/migration/migration-test.h +9 -0
@@ -18,4 +18,13 @@#define PPC_TEST_MEM_START (1 * 1024 * 1024)#define PPC_TEST_MEM_END (100 * 1024 * 1024) +/* ARM */ +#define ARM_TEST_MEM_START (0x40000000 + 1 * 1024 * 1024) +#define ARM_TEST_MEM_END (0x40000000 + 100 * 1024 * 1024) +#define ARM_MACH_VIRT_UART 0x09000000 +/* AArch64 kernel load address is 0x40080000, and the test memory starts at +* 0x40100000. So the maximum allowable kernel size is 512KB. +*/ +#define ARM_TEST_MAX_KERNEL_SIZE (512 * 1024) +#endif /* _TEST_MIGRATION_H_ */
Signature · 1 line
1.8.3.1
Quoted 11 lines · Wei Huang
This patch adds migration test support for aarch64. The test code, which implements the same functionality as x86, is booted as a kernel in qemu. Here are the design choices we make for aarch64:
* We choose this -kernel approach because aarch64 QEMU doesn't provide a built-in fw like x86 does. So instead of relying on a boot loader, we use -kernel approach for aarch64.
* The serial output is sent to PL011 directly.
* The physical memory base for mach-virt machine is0x40000000. We change thestart_addressandend_addressfor aarch64.
Quoted 7 lines
In addition to providing the binary, this patch also includes the source code and the build script in tests/migration/aarch64. So users can change the source and/or re-compile the binary as they wish.
Reviewed-by Juan Quintela <[email protected]>Reviewed-by Andrew Jones <[email protected]>Signed-off-by Wei Huang <[email protected]>
Quoted 251 lines
--- tests/Makefile.include | 1 + tests/migration-test.c | 27 +++++++++++-- tests/migration/Makefile | 2 +- tests/migration/aarch64/Makefile | 19 +++++++++ tests/migration/aarch64/a-b-kernel.S | 75 ++++++++++++++++++++++++++++++++++++ tests/migration/aarch64/a-b-kernel.h | 19 +++++++++ tests/migration/migration-test.h | 9 +++++ 7 files changed, 147 insertions(+), 5 deletions(-) create mode 100644 tests/migration/aarch64/Makefile create mode 100644 tests/migration/aarch64/a-b-kernel.S create mode 100644 tests/migration/aarch64/a-b-kernel.htests/Makefile.include +1
-0@@ -402,6 +402,7 @@ check-qtest-arm-y += tests/hexloader-test$(EXESUF) check-qtest-aarch64-y = tests/numa-test$(EXESUF) check-qtest-aarch64-$(CONFIG_SDHCI) += tests/sdhci-test$(EXESUF) check-qtest-aarch64-y += tests/boot-serial-test$(EXESUF) +check-qtest-aarch64-y += tests/migration-test$(EXESUF) check-qtest-microblazeel-y = $(check-qtest-microblaze-y)tests/migration-test.c +23
-4@@ -86,12 +86,13 @@ static const char *tmpfs;* repeatedly. It outputs a 'B' at a fixed rate while it's still running. */ #include "tests/migration/i386/a-b-bootblock.h" +#include "tests/migration/aarch64/a-b-kernel.h" -static void init_bootfile_x86 (const char *bootpath) +static void init_bootfile (const char *bootpath,void *content) {FILE *bootfile =fopen (bootpath,"wb" ); - g_assert_cmpint(fwrite(x86_bootsect, 512, 1, bootfile), ==, 1); + g_assert_cmpint(fwrite(content, 512, 1, bootfile), ==, 1);fclose (bootfile); }@@ -428,7 +429,7 @@ static int test_migrate_start(QTestState **from, QTestState **to, got_stop = false;if (strcmp (arch,"i386" ) ==0 ||strcmp (arch,"x86_64" ) ==0 ) { -init_bootfile_x86 (bootpath); +init_bootfile (bootpath, x86_bootsect); cmd_src =g_strdup_printf ("-machine accel=%s -m 150M" " -name source,debug-threads=on" " -serial file:%s/src_serial"@@ -459,6 +460,24 @@ static int test_migrate_start(QTestState **from, QTestState **to, start_address =PPC_TEST_MEM_START ; end_address =PPC_TEST_MEM_END ; + }else if (strcmp (arch,"aarch64" ) ==0 ) { +init_bootfile (bootpath, aarch64_kernel); + cmd_src =g_strdup_printf ("-machine virt,accel=%s,gic-version=max " +"-name vmsource,debug-threads=on -cpu max " +"-m 150M -serial file:%s/src_serial " +"-kernel %s " , + accel, tmpfs, bootpath); + cmd_dst =g_strdup_printf ("-machine virt,accel=%s,gic-version=max " +"-name vmdest,debug-threads=on -cpu max " +"-m 150M -serial file:%s/dest_serial " +"-kernel %s " +"-incoming %s " , + accel, tmpfs, bootpath, uri); + + start_address =ARM_TEST_MEM_START ; + end_address =ARM_TEST_MEM_END ; + +g_assert (sizeof (aarch64_kernel) <=ARM_TEST_MAX_KERNEL_SIZE ); }else {g_assert_not_reached (); }@@ -545,7 +564,7 @@ static void test_deprecated(void) {QTestState *from; - from =qtest_start ("" ); + from =qtest_start ("-machine none" );deprecated_set_downtime (from,0.12345 );deprecated_set_speed (from,12345 );tests/migration/Makefile +1
-1@@ -5,7 +5,7 @@ # See the COPYING file in the top-level directory. # -TARGET_LIST = i386 +TARGET_LIST = i386 aarch64 SRC_PATH = ../..tests/migration/aarch64/Makefile new file +19
-0@@ -0,0 +1,19 @@ +# To specify cross compiler prefix, use CROSS_PREFIX= +# $ make CROSS_PREFIX=aarch64-linux-gnu- + +.PHONY: all clean +all: a-b-kernel.h + +a-b-kernel.h: aarch64.kernel + echo "$$__note" > $@ + xxd -i $< | sed -e 's/.*int.*//' >> $@ + +aarch64.kernel: aarch64.elf + $(CROSS_PREFIX)objcopy -O binary $< $@ + +aarch64.elf: a-b-kernel.S + $(CROSS_PREFIX)gcc -o $@ -nostdlib -Wl,--build-id=none $< + +clean: + $(RM) *.kernel *.elf +tests/migration/aarch64/a-b-kernel.S new file +75
-0@@ -0,0 +1,75 @@ +# +# Copyright (c) 2018 Red Hat, Inc. and/or its affiliates +# +# Author: +# Wei Huang <[email protected]> +# +# This work is licensed under the terms of the GNU GPL, version 2 or later. +# See the COPYING file in the top-level directory. +# +# Note: Please make sure the compiler compiles the assembly code below with +# pc-relative address. Also the branch instructions should use relative +# addresses only. + +#include "../migration-test.h" + +.section .text + + .globl _start + +_start: + /* disable MMU to use phys mem address */ + mrs x0, sctlr_el1 + bic x0, x0, #(1<<0) + msr sctlr_el1, x0 + isb + + /* traverse test memory region */ + mov x0, #ARM_TEST_MEM_START + mov x1, #ARM_TEST_MEM_END + + /* output char 'A' to PL011 */ + mov w3, 'A' + mov x2, #ARM_MACH_VIRT_UART + strb w3, [x2] + + /* clean up memory */ + mov w3, #0 + mov x4, x0 +clean: + strb w3, [x4] + add x4, x4, #TEST_MEM_PAGE_SIZE + cmp x4, x1 + ble clean + + /* w5 keeps a counter so we can limit the output speed */ + mov w5, #0 + + /* main body */ +mainloop: + mov x4, x0 + +innerloop: + /* increment the first byte of each page by 1 */ + ldrb w3, [x4] + add w3, w3, #1 + and w3, w3, #0xff + strb w3, [x4] + + /* make sure QEMU user space can see consistent data as MMU is off */ + dc civac, x4 + + add x4, x4, #TEST_MEM_PAGE_SIZE + cmp x4, x1 + blt innerloop + + add w5, w5, #1 + and w5, w5, #0xff + cmp w5, #0 + bne mainloop + + /* output char 'B' to PL011 */ + mov w3, 'B' + strb w3, [x2] + + b mainlooptests/migration/aarch64/a-b-kernel.h new file +19
-0@@ -0,0 +1,19 @@ +/* This file is automatically generated from the assembly file in +* tests/migration/aarch64. Edit that file and then run "make all" +* inside tests/migration to update, and then remember to send both +* the header and the assembler differences in your patch submission. +*/ +unsigned char aarch64_kernel[] = { +0x00 ,0x10 ,0x38 ,0xd5 ,0x00 ,0xf8 ,0x7f ,0x92 ,0x00 ,0x10 ,0x18 ,0xd5 , +0xdf ,0x3f ,0x03 ,0xd5 ,0x00 ,0x02 ,0xa8 ,0xd2 ,0x01 ,0xc8 ,0xa8 ,0xd2 , +0x23 ,0x08 ,0x80 ,0x52 ,0x02 ,0x20 ,0xa1 ,0xd2 ,0x43 ,0x00 ,0x00 ,0x39 , +0x03 ,0x00 ,0x80 ,0x52 ,0xe4 ,0x03 ,0x00 ,0xaa ,0x83 ,0x00 ,0x00 ,0x39 , +0x84 ,0x04 ,0x40 ,0x91 ,0x9f ,0x00 ,0x01 ,0xeb ,0xad ,0xff ,0xff ,0x54 , +0x05 ,0x00 ,0x80 ,0x52 ,0xe4 ,0x03 ,0x00 ,0xaa ,0x83 ,0x00 ,0x40 ,0x39 , +0x63 ,0x04 ,0x00 ,0x11 ,0x63 ,0x1c ,0x00 ,0x12 ,0x83 ,0x00 ,0x00 ,0x39 , +0x24 ,0x7e ,0x0b ,0xd5 ,0x84 ,0x04 ,0x40 ,0x91 ,0x9f ,0x00 ,0x01 ,0xeb , +0x2b ,0xff ,0xff ,0x54 ,0xa5 ,0x04 ,0x00 ,0x11 ,0xa5 ,0x1c ,0x00 ,0x12 , +0xbf ,0x00 ,0x00 ,0x71 ,0x81 ,0xfe ,0xff ,0x54 ,0x43 ,0x08 ,0x80 ,0x52 , +0x43 ,0x00 ,0x00 ,0x39 ,0xf1 ,0xff ,0xff ,0x17 +}; +tests/migration/migration-test.h +9
-0@@ -18,4 +18,13 @@#define PPC_TEST_MEM_START (1 * 1024 * 1024)#define PPC_TEST_MEM_END (100 * 1024 * 1024) +/* ARM */ +#define ARM_TEST_MEM_START (0x40000000 + 1 * 1024 * 1024) +#define ARM_TEST_MEM_END (0x40000000 + 100 * 1024 * 1024) +#define ARM_MACH_VIRT_UART 0x09000000 +/* AArch64 kernel load address is 0x40080000, and the test memory starts at +* 0x40100000. So the maximum allowable kernel size is 512KB. +*/ +#define ARM_TEST_MAX_KERNEL_SIZE (512 * 1024) +#endif /* _TEST_MIGRATION_H_ */
Quoted 11 lines · * Wei Huang ([email protected]) wrote:
This patch adds migration test support for aarch64. The test code, which implements the same functionality as x86, is booted as a kernel in qemu. Here are the design choices we make for aarch64:
* We choose this -kernel approach because aarch64 QEMU doesn't provide a built-in fw like x86 does. So instead of relying on a boot loader, we use -kernel approach for aarch64.
* The serial output is sent to PL011 directly.
* The physical memory base for mach-virt machine is0x40000000. We change thestart_addressandend_addressfor aarch64.
Quoted 7 lines
In addition to providing the binary, this patch also includes the source code and the build script in tests/migration/aarch64. So users can change the source and/or re-compile the binary as they wish.
Reviewed-by Juan Quintela <[email protected]>Reviewed-by Andrew Jones <[email protected]>Signed-off-by Wei Huang <[email protected]>
Queued.
I've removed the blank lines at the end of
tests/migration/aarch64/Makefile
tests/migration/aarch64/a-b-kernel.h
Dave
Quoted 253 lines
--- tests/Makefile.include | 1 + tests/migration-test.c | 27 +++++++++++-- tests/migration/Makefile | 2 +- tests/migration/aarch64/Makefile | 19 +++++++++ tests/migration/aarch64/a-b-kernel.S | 75 ++++++++++++++++++++++++++++++++++++ tests/migration/aarch64/a-b-kernel.h | 19 +++++++++ tests/migration/migration-test.h | 9 +++++ 7 files changed, 147 insertions(+), 5 deletions(-) create mode 100644 tests/migration/aarch64/Makefile create mode 100644 tests/migration/aarch64/a-b-kernel.S create mode 100644 tests/migration/aarch64/a-b-kernel.htests/Makefile.include +1
-0@@ -402,6 +402,7 @@ check-qtest-arm-y += tests/hexloader-test$(EXESUF) check-qtest-aarch64-y = tests/numa-test$(EXESUF) check-qtest-aarch64-$(CONFIG_SDHCI) += tests/sdhci-test$(EXESUF) check-qtest-aarch64-y += tests/boot-serial-test$(EXESUF) +check-qtest-aarch64-y += tests/migration-test$(EXESUF) check-qtest-microblazeel-y = $(check-qtest-microblaze-y)tests/migration-test.c +23
-4@@ -86,12 +86,13 @@ static const char *tmpfs;* repeatedly. It outputs a 'B' at a fixed rate while it's still running. */ #include "tests/migration/i386/a-b-bootblock.h" +#include "tests/migration/aarch64/a-b-kernel.h" -static void init_bootfile_x86 (const char *bootpath) +static void init_bootfile (const char *bootpath,void *content) {FILE *bootfile =fopen (bootpath,"wb" ); - g_assert_cmpint(fwrite(x86_bootsect, 512, 1, bootfile), ==, 1); + g_assert_cmpint(fwrite(content, 512, 1, bootfile), ==, 1);fclose (bootfile); }@@ -428,7 +429,7 @@ static int test_migrate_start(QTestState **from, QTestState **to, got_stop = false;if (strcmp (arch,"i386" ) ==0 ||strcmp (arch,"x86_64" ) ==0 ) { -init_bootfile_x86 (bootpath); +init_bootfile (bootpath, x86_bootsect); cmd_src =g_strdup_printf ("-machine accel=%s -m 150M" " -name source,debug-threads=on" " -serial file:%s/src_serial"@@ -459,6 +460,24 @@ static int test_migrate_start(QTestState **from, QTestState **to, start_address =PPC_TEST_MEM_START ; end_address =PPC_TEST_MEM_END ; + }else if (strcmp (arch,"aarch64" ) ==0 ) { +init_bootfile (bootpath, aarch64_kernel); + cmd_src =g_strdup_printf ("-machine virt,accel=%s,gic-version=max " +"-name vmsource,debug-threads=on -cpu max " +"-m 150M -serial file:%s/src_serial " +"-kernel %s " , + accel, tmpfs, bootpath); + cmd_dst =g_strdup_printf ("-machine virt,accel=%s,gic-version=max " +"-name vmdest,debug-threads=on -cpu max " +"-m 150M -serial file:%s/dest_serial " +"-kernel %s " +"-incoming %s " , + accel, tmpfs, bootpath, uri); + + start_address =ARM_TEST_MEM_START ; + end_address =ARM_TEST_MEM_END ; + +g_assert (sizeof (aarch64_kernel) <=ARM_TEST_MAX_KERNEL_SIZE ); }else {g_assert_not_reached (); }@@ -545,7 +564,7 @@ static void test_deprecated(void) {QTestState *from; - from =qtest_start ("" ); + from =qtest_start ("-machine none" );deprecated_set_downtime (from,0.12345 );deprecated_set_speed (from,12345 );tests/migration/Makefile +1
-1@@ -5,7 +5,7 @@ # See the COPYING file in the top-level directory. # -TARGET_LIST = i386 +TARGET_LIST = i386 aarch64 SRC_PATH = ../..tests/migration/aarch64/Makefile new file +19
-0@@ -0,0 +1,19 @@ +# To specify cross compiler prefix, use CROSS_PREFIX= +# $ make CROSS_PREFIX=aarch64-linux-gnu- + +.PHONY: all clean +all: a-b-kernel.h + +a-b-kernel.h: aarch64.kernel + echo "$$__note" > $@ + xxd -i $< | sed -e 's/.*int.*//' >> $@ + +aarch64.kernel: aarch64.elf + $(CROSS_PREFIX)objcopy -O binary $< $@ + +aarch64.elf: a-b-kernel.S + $(CROSS_PREFIX)gcc -o $@ -nostdlib -Wl,--build-id=none $< + +clean: + $(RM) *.kernel *.elf +tests/migration/aarch64/a-b-kernel.S new file +75
-0@@ -0,0 +1,75 @@ +# +# Copyright (c) 2018 Red Hat, Inc. and/or its affiliates +# +# Author: +# Wei Huang <[email protected]> +# +# This work is licensed under the terms of the GNU GPL, version 2 or later. +# See the COPYING file in the top-level directory. +# +# Note: Please make sure the compiler compiles the assembly code below with +# pc-relative address. Also the branch instructions should use relative +# addresses only. + +#include "../migration-test.h" + +.section .text + + .globl _start + +_start: + /* disable MMU to use phys mem address */ + mrs x0, sctlr_el1 + bic x0, x0, #(1<<0) + msr sctlr_el1, x0 + isb + + /* traverse test memory region */ + mov x0, #ARM_TEST_MEM_START + mov x1, #ARM_TEST_MEM_END + + /* output char 'A' to PL011 */ + mov w3, 'A' + mov x2, #ARM_MACH_VIRT_UART + strb w3, [x2] + + /* clean up memory */ + mov w3, #0 + mov x4, x0 +clean: + strb w3, [x4] + add x4, x4, #TEST_MEM_PAGE_SIZE + cmp x4, x1 + ble clean + + /* w5 keeps a counter so we can limit the output speed */ + mov w5, #0 + + /* main body */ +mainloop: + mov x4, x0 + +innerloop: + /* increment the first byte of each page by 1 */ + ldrb w3, [x4] + add w3, w3, #1 + and w3, w3, #0xff + strb w3, [x4] + + /* make sure QEMU user space can see consistent data as MMU is off */ + dc civac, x4 + + add x4, x4, #TEST_MEM_PAGE_SIZE + cmp x4, x1 + blt innerloop + + add w5, w5, #1 + and w5, w5, #0xff + cmp w5, #0 + bne mainloop + + /* output char 'B' to PL011 */ + mov w3, 'B' + strb w3, [x2] + + b mainlooptests/migration/aarch64/a-b-kernel.h new file +19
-0@@ -0,0 +1,19 @@ +/* This file is automatically generated from the assembly file in +* tests/migration/aarch64. Edit that file and then run "make all" +* inside tests/migration to update, and then remember to send both +* the header and the assembler differences in your patch submission. +*/ +unsigned char aarch64_kernel[] = { +0x00 ,0x10 ,0x38 ,0xd5 ,0x00 ,0xf8 ,0x7f ,0x92 ,0x00 ,0x10 ,0x18 ,0xd5 , +0xdf ,0x3f ,0x03 ,0xd5 ,0x00 ,0x02 ,0xa8 ,0xd2 ,0x01 ,0xc8 ,0xa8 ,0xd2 , +0x23 ,0x08 ,0x80 ,0x52 ,0x02 ,0x20 ,0xa1 ,0xd2 ,0x43 ,0x00 ,0x00 ,0x39 , +0x03 ,0x00 ,0x80 ,0x52 ,0xe4 ,0x03 ,0x00 ,0xaa ,0x83 ,0x00 ,0x00 ,0x39 , +0x84 ,0x04 ,0x40 ,0x91 ,0x9f ,0x00 ,0x01 ,0xeb ,0xad ,0xff ,0xff ,0x54 , +0x05 ,0x00 ,0x80 ,0x52 ,0xe4 ,0x03 ,0x00 ,0xaa ,0x83 ,0x00 ,0x40 ,0x39 , +0x63 ,0x04 ,0x00 ,0x11 ,0x63 ,0x1c ,0x00 ,0x12 ,0x83 ,0x00 ,0x00 ,0x39 , +0x24 ,0x7e ,0x0b ,0xd5 ,0x84 ,0x04 ,0x40 ,0x91 ,0x9f ,0x00 ,0x01 ,0xeb , +0x2b ,0xff ,0xff ,0x54 ,0xa5 ,0x04 ,0x00 ,0x11 ,0xa5 ,0x1c ,0x00 ,0x12 , +0xbf ,0x00 ,0x00 ,0x71 ,0x81 ,0xfe ,0xff ,0x54 ,0x43 ,0x08 ,0x80 ,0x52 , +0x43 ,0x00 ,0x00 ,0x39 ,0xf1 ,0xff ,0xff ,0x17 +}; +tests/migration/migration-test.h +9
-0@@ -18,4 +18,13 @@#define PPC_TEST_MEM_START (1 * 1024 * 1024)#define PPC_TEST_MEM_END (100 * 1024 * 1024) +/* ARM */ +#define ARM_TEST_MEM_START (0x40000000 + 1 * 1024 * 1024) +#define ARM_TEST_MEM_END (0x40000000 + 100 * 1024 * 1024) +#define ARM_MACH_VIRT_UART 0x09000000 +/* AArch64 kernel load address is 0x40080000, and the test memory starts at +* 0x40100000. So the maximum allowable kernel size is 512KB. +*/ +#define ARM_TEST_MAX_KERNEL_SIZE (512 * 1024) +#endif /* _TEST_MIGRATION_H_ */ Signature · 1 line
1.8.3.1
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK