configs: at91: sama5: enable CMD_IMI
PATCH 1/1 configs: at91: sama5: enable CMD_IMI
Enable iminfo command with CONFIG_CMD_IMI
Signed-off-by Eugen Hristev <[email protected]>
--- configs/sama5d27_som1_ek_mmc1_defconfig | 1 - configs/sama5d27_som1_ek_mmc_defconfig | 1 - configs/sama5d2_ptc_ek_mmc_defconfig | 1 - configs/sama5d2_ptc_ek_nandflash_defconfig | 1 - configs/sama5d2_xplained_emmc_defconfig | 1 - configs/sama5d2_xplained_mmc_defconfig | 1 - configs/sama5d2_xplained_spiflash_defconfig | 1 - configs/sama5d3_xplained_mmc_defconfig | 1 - configs/sama5d3_xplained_nandflash_defconfig | 1 - configs/sama5d4_xplained_mmc_defconfig | 1 - configs/sama5d4_xplained_nandflash_defconfig | 1 - configs/sama5d4_xplained_spiflash_defconfig | 1 - 12 files changed, 12 deletions(-)
configs/sama5d27_som1_ek_mmc1_defconfig +0 -1
@@ -28,7 +28,6 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwai CONFIG_SPL_SEPARATE_BSS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set
configs/sama5d27_som1_ek_mmc_defconfig +0 -1
@@ -29,7 +29,6 @@ CONFIG_MISC_INIT_R=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set
configs/sama5d2_ptc_ek_mmc_defconfig +0 -1
@@ -18,7 +18,6 @@ CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set
configs/sama5d2_ptc_ek_nandflash_defconfig +0 -1
@@ -18,7 +18,6 @@ CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set
configs/sama5d2_xplained_emmc_defconfig +0 -1
@@ -28,7 +28,6 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwai CONFIG_SPL_SEPARATE_BSS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set
configs/sama5d2_xplained_mmc_defconfig +0 -1
@@ -29,7 +29,6 @@ CONFIG_MISC_INIT_R=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set
configs/sama5d2_xplained_spiflash_defconfig +0 -1
@@ -27,7 +27,6 @@ CONFIG_MISC_INIT_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set
configs/sama5d3_xplained_mmc_defconfig +0 -1
@@ -27,7 +27,6 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwai CONFIG_SPL_SEPARATE_BSS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y
configs/sama5d3_xplained_nandflash_defconfig +0 -1
@@ -24,7 +24,6 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(boots CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y
configs/sama5d4_xplained_mmc_defconfig +0 -1
@@ -28,7 +28,6 @@ CONFIG_MISC_INIT_R=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y
configs/sama5d4_xplained_nandflash_defconfig +0 -1
@@ -25,7 +25,6 @@ CONFIG_MISC_INIT_R=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y
configs/sama5d4_xplained_spiflash_defconfig +0 -1
@@ -27,7 +27,6 @@ CONFIG_MISC_INIT_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y
Signature · 1 line
2.7.4
Quoted 3 lines · Eugen Hristev
Enable iminfo command with
CONFIG_CMD_IMISigned-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181022/87ea6b8b/attachment.sig>