x86: Bring qemu-x86_64 target in travis-ci build/testing
v2 cover x86: Bring qemu-x86_64 target in travis-ci build/testing
At present the QEMU x86_64 target is broken here and there, for example with newer compiler it even does not boot. EFI loader does not work either.
This series is a combination of Heinrich's EFI loader fixes and my fixes to QEMU x86_64 target. To enable qemu-x86_64 target in travis-ci for build and testing, uboot-test-hooks needs to be updated and the PR is sent.
The series is available at u-boot-x86/qemu-working for testing.
Changes in v2:
- some rewording in the doc per Heinrich's review comments
- Change to use MHz instead of Hz for the early timer frequency
- Change the config option value to 400 which indicates 400 MHz
- new patch to generate grub_x64.efi for qemu-x86_64 for travis-ci
- new patch to update to use QEMU 3.0.0 for travis-ci testing
Bin Meng (10):
x86: Specify -march=core2 to build 64-bit U-Boot proper
x86: Ensure no instruction sets of MMX/SSE are generated in 64-bit
build
x86: doc: Mention qemu-x86_64 support
x86: doc: Remove stale sections of 64-bit support
x86: Fix the mystery of printch() during 64-bit boot
x86: tsc: Introduce config option for early timer frequency
x86: quark: Specify X86_TSC_TIMER_EARLY_FREQ
travis: Generate grub_x64.efi for qemu-x86_64
travis: Update to use QEMU 3.0.0 for testing
travis: Add qemu-x86_64 target for test.py testing
Heinrich Schuchardt (4):
x86: qemu: enable CONFIG_SPL_DM_RTC
x86: detect unsupported relocation types
x86: put global data pointer into the .data section
efi_loader: fix relocation on x86_64
.travis.yml | 13 ++++++++++++- arch/x86/config.mk | 3 ++- arch/x86/cpu/quark/Kconfig | 4 ++++ arch/x86/cpu/start64.S | 1 + arch/x86/cpu/x86_64/cpu.c | 28 ++++++++-------------------- arch/x86/lib/relocate.c | 18 ++++++++++++++++++ configs/qemu-x86_64_defconfig | 1 + doc/README.x86 | 36 +++++++++++++++++------------------- drivers/timer/Kconfig | 10 ++++++++++ drivers/timer/tsc_timer.c | 6 +++--- lib/efi_loader/efi_runtime.c | 16 ++++++++++++---- 11 files changed, 88 insertions(+), 48 deletions(-)
Signature · 1 line
2.7.4
PATCH v2 1/14 x86: Specify -march=core2 to build 64-bit U-Boot proper
With newer kernel.org GCC (7.3.0 or 8.1.0), the u-boot.rom image built for qemu-x86_64 target does not boot. It keeps resetting soon after the 32-bit SPL jumps to 64-bit proper. Debugging shows that the reset happens inside env_callback_init().
000000000113dd85 <env_callback_init>:
113dd85: 41 54 push %r12 113dd87: 55 push %rbp 113dd88: 31 c0 xor %eax,%eax 113dd8a: 53 push %rbx 113dd8b: 0f 57 c0 xorps %xmm0,%xmm0
Executing "xorps %xmm0,%xmm0" causes CPU to immediately reset. However older GCC like 5.4.0 (the one shipped by Ubuntu 16.04) does not generate such instructions that utilizes SSE for this function - env_callback_init() and U-Boot boots without any issue. Explicitly specifying -march=core2 for newer GCC allows U-Boot proper to boot again. Examine assembly codes of env_callback_init and there is no SSE instruction in that function hence U-Boot continues to boot.
core2 seems to be the oldest arch in GCC that supports 64-bit. Like 32-bit U-Boot build we use -march=i386 which is the most conservative cpu type so that the image can run on any x86 processor, let's do the same for the 64-bit U-Boot build.
---
Changes in v2: None
arch/x86/config.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/config.mk +1 -1
@@ -23,7 +23,7 @@ endif ifeq ($(IS_32BIT),y) PLATFORM_CPPFLAGS += -march=i386 -m32 else -PLATFORM_CPPFLAGS += $(if $(CONFIG_SPL_BUILD),,-fpic) -fno-common -m64 +PLATFORM_CPPFLAGS += $(if $(CONFIG_SPL_BUILD),,-fpic) -fno-common -march=core2 -m64 endif PLATFORM_RELFLAGS += -fdata-sections -ffunction-sections -fvisibility=hidden
Signature · 1 line
2.7.4
PATCH v2 2/14 x86: Ensure no instruction sets of MMX/SSE are generated in 64-bit build
In reply to Bin MengWith the '-march=core2' fix, it seems that we have some luck that the 64-bit U-Boot boots again. However if we examine the disassembly codes there are still SSE instructions elsewhere which means passing cpu type to GCC is not enough to prevent it from generating these instructions. A simple test case is doing a 'bootefi selftest' from the U-Boot shell and it leads to a reset too.
The 'bootefi selftest' reset is even seen with the image created by the relative older GCC 5.4.0, the one shipped by Ubuntu 16.04.
The reset actually originates from undefined instruction exception caused by these SSE instructions. To keep U-Boot as a bootloader as simple as possible, we don't want to handle such advanced SIMD stuff. To make sure no MMX/SSE instruction sets are generated, tell GCC not to do this. Note AVX is out of the question as CORE2 is old enough to support AVX yet.
---
Changes in v2: None
arch/x86/config.mk | 1 + 1 file changed, 1 insertion(+)
arch/x86/config.mk +1 -0
@@ -24,6 +24,7 @@ ifeq ($(IS_32BIT),y) PLATFORM_CPPFLAGS += -march=i386 -m32 else PLATFORM_CPPFLAGS += $(if $(CONFIG_SPL_BUILD),,-fpic) -fno-common -march=core2 -m64 +PLATFORM_CPPFLAGS += -mno-mmx -mno-sse endif PLATFORM_RELFLAGS += -fdata-sections -ffunction-sections -fvisibility=hidden
Signature · 1 line
2.7.4
PATCH v2 2/14 x86: Ensure no instruction sets of MMX/SSE are generated in 64-bit build
Quoted 17 lines · Bin Meng
With the '-march=core2' fix, it seems that we have some luck that the 64-bit U-Boot boots again. However if we examine the disassembly codes there are still SSE instructions elsewhere which means passing cpu type to GCC is not enough to prevent it from generating these instructions. A simple test case is doing a 'bootefi selftest' from the U-Boot shell and it leads to a reset too.
The 'bootefi selftest' reset is even seen with the image created by the relative older GCC 5.4.0, the one shipped by Ubuntu 16.04.
The reset actually originates from undefined instruction exception caused by these SSE instructions. To keep U-Boot as a bootloader as simple as possible, we don't want to handle such advanced SIMD stuff. To make sure no MMX/SSE instruction sets are generated, tell GCC not to do this. Note AVX is out of the question as CORE2 is old enough to support AVX yet.
Quoted 8 lines
Signed-off-by Bin Meng <[email protected]>Reviewed-by Heinrich Schuchardt <[email protected]>---
Changes in v2: None
arch/x86/config.mk | 1 + 1 file changed, 1 insertion(+)
PATCH v2 3/14 x86: doc: Mention qemu-x86_64 support
In reply to Bin MengCurrently only 32-bit U-Boot for QEMU x86 is documented. Mention the 64-bit support.
---
Changes in v2:
- some rewording in the doc per Heinrich's review comments
doc/README.x86 | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)
doc/README.x86 +17 -2
@@ -32,7 +32,7 @@ are supported: - Link (Chromebook Pixel) - Minnowboard MAX - Samus (Chromebook Pixel 2015) - - QEMU x86 + - QEMU x86 (32-bit & 64-bit) As for loading an OS, U-Boot supports directly booting a 32-bit or 64-bit Linux kernel as part of a FIT image. It also supports a compressed zImage.
@@ -376,7 +376,9 @@ QEMU x86 target instructions for bare mode: To build u-boot.rom for QEMU x86 targets, just simply run -$ make qemu-x86_defconfig +$ make qemu-x86_defconfig (for 32-bit) +or +$ make qemu-x86_64_defconfig (for 64-bit) $ make all Note this default configuration will build a U-Boot for the QEMU x86 i440FX
@@ -479,6 +481,19 @@ Here the kernel (bzImage) is loaded to 01000000 and initrd is to 04000000. Then, => zboot 01000000 - 04000000 1b1ab50 +To run 64-bit U-Boot, qemu-system-x86_64 should be used instead, e.g.: +$ qemu-system-x86_64 -nographic -bios path/to/u-boot.rom + +A specific CPU can be specified via the '-cpu' parameter but please make +sure the specified CPU supports 64-bit like '-cpu core2duo'. Conversely +'-cpu pentium' won't work for obvious reasons that the processor only +supports 32-bit. + +Note 64-bit support is very preliminary at this point. Lots of features +are missing in the 64-bit world. One notable feature is the VGA console +support which is currently missing, so that you must specify '-nographic' +to get 64-bit U-Boot up and running. + Updating U-Boot on Edison ------------------------- By default Intel Edison boards are shipped with preinstalled heavily
Signature · 1 line
2.7.4
PATCH v2 3/14 x86: doc: Mention qemu-x86_64 support
Quoted 6 lines · Bin Meng
Currently only 32-bit U-Boot for QEMU x86 is documented. Mention the 64-bit support.
Signed-off-by Bin Meng <[email protected]>Reviewed-by Heinrich Schuchardt <[email protected]>
Quoted 7 lines
---
Changes in v2:
- some rewording in the doc per Heinrich's review commentsdoc/README.x86 | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)
PATCH v2 4/14 x86: doc: Remove stale sections of 64-bit support
In reply to Bin MengThere are some sections in current doc saying 64-bit is unsupported. This apparently is out of date. Remove it.
---
Changes in v2: None
doc/README.x86 | 17 ----------------- 1 file changed, 17 deletions(-)
doc/README.x86 +0 -17
@@ -1160,27 +1160,10 @@ to load a 'u-boot-payload.efi', see below test logs on QEMU. See README.u-boot_on_efi and README.uefi for details of EFI support in U-Boot. -64-bit Support --------------- -U-Boot supports booting a 64-bit kernel directly and is able to change to -64-bit mode to do so. However, U-Boot itself is currently always built -in 32-bit mode. Some access to the full memory range is provided with -arch_phys_memset(). - -The development work to make U-Boot itself run in 64-bit mode has not yet -been attempted. The best approach would likely be to build a 32-bit SPL -image for U-Boot, with CONFIG_SPL_BUILD. This could then handle the early CPU -init in 16-bit and 32-bit mode, running the FSP and any other binaries that -are needed. Then it could change to 64-bit model and jump to U-Boot proper. - -Given U-Boot's extensive 64-bit support this has not been a high priority, -but it would be a nice addition. - TODO List --------- - Audio - Chrome OS verified boot -- Building U-Boot to run in 64-bit mode References ----------
Signature · 1 line
2.7.4
PATCH v2 5/14 x86: qemu: enable CONFIG_SPL_DM_RTC
In reply to Bin MengFrom: Heinrich Schuchardt <[email protected]>
Since commit 380d4f787a3f ("rtc: Allow use of RTC in SPL and TPL") qemu-x86_64_defconfig does not boot anymore.
---
Changes in v2: None
configs/qemu-x86_64_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/qemu-x86_64_defconfig +1 -0
@@ -63,6 +63,7 @@ CONFIG_SPL_REGMAP=y CONFIG_SYSCON=y CONFIG_SPL_SYSCON=y CONFIG_CPU=y +CONFIG_SPL_DM_RTC=y CONFIG_SPI=y CONFIG_SPL_TIMER=y CONFIG_USB_STORAGE=y
Signature · 1 line
2.7.4
PATCH v2 6/14 x86: detect unsupported relocation types
In reply to Bin MengFrom: Heinrich Schuchardt <[email protected]>
Currently we support only relocations of type ELF64_R_TYPE or ELF32_R_TYPE. We should be warned if other relocation types appear in the relocation sections.
This type of message has helped to identify code overwriting a relocation section before relocation and incorrect parsing of relocation tables.
---
Changes in v2: None
arch/x86/lib/relocate.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
arch/x86/lib/relocate.c +18 -0
@@ -53,6 +53,15 @@ static void do_elf_reloc_fixups64(unsigned int text_base, uintptr_t size,Elf64_Addr *offset_ptr_ram; do { + unsigned long long type = ELF64_R_TYPE(re_src->r_info); + + if (type != R_X86_64_RELATIVE) { + printf("%s: unsupported relocation type 0x%llx " + "at %p, ", __func__, type, re_src); + printf("offset = 0x%llx\n", re_src->r_offset); + continue; + } + /* Get the location from the relocation entry */ offset_ptr_rom = (Elf64_Addr *)(uintptr_t)re_src->r_offset;
@@ -91,6 +100,15 @@ static void do_elf_reloc_fixups32(unsigned int text_base, uintptr_t size,Elf32_Addr *offset_ptr_ram; do { + unsigned int type = ELF32_R_TYPE(re_src->r_info); + + if (type != R_386_RELATIVE) { + printf("%s: unsupported relocation type 0x%x " + "at %p, ", __func__, type, re_src); + printf("offset = 0x%x\n", re_src->r_offset); + continue; + } + /* Get the location from the relocation entry */ offset_ptr_rom = (Elf32_Addr *)(uintptr_t)re_src->r_offset;
Signature · 1 line
2.7.4
PATCH v2 7/14 x86: put global data pointer into the .data section
In reply to Bin MengFrom: Heinrich Schuchardt <[email protected]>
On x86_64 the field global_data_ptr is assigned before relocation. As sections for uninitialized global data (.bss) overlap with the relocation sections (.rela) this destroys the relocation table and leads to spurious errors.
Initialization forces the global_data_ptr into a section for initialized global data (.data) which cannot overlap any .rela section.
---
Changes in v2: None
arch/x86/cpu/x86_64/cpu.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
arch/x86/cpu/x86_64/cpu.c +8 -2
@@ -7,8 +7,14 @@#include <common.h> #include <debug_uart.h> -/* Global declaration of gd */ -struct global_data *global_data_ptr; +/* +* Global declaration of gd. +* +* As we write to it before relocation we have to make sure it is not put into +* a .bss section which may overlap a .rela section. Initialization forces it +* into a .data section which cannot overlap any .rela section. +*/ +struct global_data *global_data_ptr = (struct global_data *)~0 ;void arch_setup_gd (gd_t *new_gd) {
Signature · 1 line
2.7.4
PATCH v2 8/14 efi_loader: fix relocation on x86_64
In reply to Bin MengFrom: Heinrich Schuchardt <[email protected]>
Currently the relocation of the EFI runtime on x86_64 fails. This renders the EFI subsystem unusable. The ELF relocation records for x86_64 contain an addend field.
Always write the function name into error messages related to the EFI runtime relocation.
Break an excessively long line.
---
Changes in v2: None
lib/efi_loader/efi_runtime.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)
lib/efi_loader/efi_runtime.c +12 -4
@@ -41,9 +41,13 @@ static efi_status_t __efi_runtime EFIAPI efi_invalid_parameter(void);#elif defined(__arm__)#define R_RELATIVE R_ARM_RELATIVE#define R_MASK 0xffULL -#elif defined(__x86_64__) || defined(__i386__) +#elif defined(__i386__)#define R_RELATIVE R_386_RELATIVE#define R_MASK 0xffULL +#elif defined(__x86_64__) +#define R_RELATIVE R_X86_64_RELATIVE +#define R_MASK 0xffffffffULL +#define IS_RELA 1#elif defined(__riscv)#define R_RELATIVE R_RISCV_RELATIVE#define R_MASK 0xffULL
@@ -358,7 +362,8 @@ void efi_runtime_relocate(ulong offset, struct efi_mem_desc *map) p = (void *)((ulong )rel->offset - base) + gd->relocaddr; -debug ("%s: rel->info=%#lx *p=%#lx rel->offset=%p\n" , __func__, rel->info, *p, rel->offset); +debug ("%s: rel->info=%#lx *p=%#lx rel->offset=%p\n" , __func__, + rel->info, *p, rel->offset);switch (rel->info &R_MASK ) {case R_RELATIVE :
@@ -377,6 +382,9 @@ void efi_runtime_relocate(ulong offset, struct efi_mem_desc *map) }#endif default : +if (!efi_runtime_tobedetached (p)) +printf ("%s: Unknown relocation type %llx\n" , + __func__, rel->info &R_MASK );continue ; }
@@ -385,8 +393,8 @@ void efi_runtime_relocate(ulong offset, struct efi_mem_desc *map) newaddr > (map->virtual_start + (map->num_pages << EFI_PAGE_SHIFT)))) {if (!efi_runtime_tobedetached (p)) -printf ("U-Boot EFI: Relocation at %p is out of " -"range (%lx)\n" , p, newaddr); +printf ("%s: Relocation@%p is out of " +"range (%lx)\n" , __func__, p, newaddr);continue ; }
Signature · 1 line
2.7.4
Alexander Graf
AppliedPATCH v2 8/14 efi_loader: fix relocation on x86_64
Quoted 9 lines
From: Heinrich Schuchardt <[email protected]>
Currently the relocation of the EFI runtime on
x86_64fails. This renders the EFI subsystem unusable. The ELF relocation records forx86_64contain an addend field.Always write the function name into error messages related to the EFI runtime relocation.
Quoted 6 lines
Break an excessively long line.
Signed-off-by Heinrich Schuchardt <[email protected]>Reviewed-by Bin Meng <[email protected]>Tested-by Bin Meng <[email protected]>Signed-off-by Bin Meng <[email protected]>
Thanks, applied to efi-2018.11
Alex
PATCH v2 8/14 efi_loader: fix relocation on x86_64
Hi Alex,
Quoted 10 lines · Alexander Graf
Quoted 10 lines
From: Heinrich Schuchardt <[email protected]>
Currently the relocation of the EFI runtime on
x86_64fails. This renders the EFI subsystem unusable. The ELF relocation records forx86_64contain an addend field.Always write the function name into error messages related to the EFI runtime relocation.
Quoted 8 lines
Quoted 6 lines
Break an excessively long line.
Signed-off-by Heinrich Schuchardt <[email protected]>Reviewed-by Bin Meng <[email protected]>Tested-by Bin Meng <[email protected]>Signed-off-by Bin Meng <[email protected]>Thanks, applied to efi-2018.11
Thanks for taking this, but this patch series was assigned to me in patchwork :) This whole patch series needs to go in a batch to make sure qemu-x86_64 travis-ci pass, since you've already taken this single one, can you please let me know when you will send the PR? This series will have to wait after the efi PR is merged.
Regards,
Bin
PATCH v2 8/14 efi_loader: fix relocation on x86_64
Hi Bin,
Quoted 20 lines · Bin Meng
Hi Alex,
Quoted 17 lines · Alexander Graf
Quoted 16 lines
From: Heinrich Schuchardt <[email protected]>
Currently the relocation of the EFI runtime on
x86_64fails. This renders the EFI subsystem unusable. The ELF relocation records forx86_64contain an addend field.Always write the function name into error messages related to the EFI runtime relocation.
Break an excessively long line.
Signed-off-by Heinrich Schuchardt <[email protected]>Reviewed-by Bin Meng <[email protected]>Tested-by Bin Meng <[email protected]>Signed-off-by Bin Meng <[email protected]>
Quoted 7 lines
Quoted 1 line
Thanks, applied to efi-2018.11
Thanks for taking this, but this patch series was assigned to me in patchwork :) This whole patch series needs to go in a batch to make sure qemu-x86_64 travis-ci pass, since you've already taken this single one, can you please let me know when you will send the PR? This series will have to wait after the efi PR is merged.
I don't think you need to wait. Just apply it to your queue as well and git merge will sort the rest :).
Alex
PATCH v2 9/14 x86: Fix the mystery of printch() during 64-bit boot
In reply to Bin MengAt present in arch_setup_gd() it calls printch(' ') at the end which has been a mystery for a long time as without such call the 64-bit U-Boot just does not boot at all.
In fact this is due to the bug that board_init_f() was called with boot_flags not being set. Hence whatever value being there in the rdi register becomes the boot_flags if without such magic call. With a printch(' ') call the rdi register is initialized as 0x20 and this value seems to be sane enough for the whole boot process.
---
Changes in v2: None
arch/x86/cpu/start64.S | 1 + arch/x86/cpu/x86_64/cpu.c | 18 ------------------ 2 files changed, 1 insertion(+), 18 deletions(-)
arch/x86/cpu/start64.S +1 -0
@@ -20,6 +20,7 @@ _start: call board_init_f_init_reserve + xor %rdi, %rdi call board_init_f call board_init_f_r
arch/x86/cpu/x86_64/cpu.c +0 -18
@@ -19,24 +19,6 @@ struct global_data *global_data_ptr = (struct global_data *)~0;void arch_setup_gd (gd_t *new_gd) { global_data_ptr = new_gd; - -/* -* TODO(sjg at chromium.org): For some reason U-Boot does not boot -* without this line. It fails to start up U-Boot proper and instead -* restarts SPL. Need to figure out why: -* -* U-Boot SPL 2017.01 -* -* U-Boot SPL 2017.01 -* CPU: Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz -* Trying to boot from SPIJumping to 64-bit U-Boot: Note many -* features are missing -* -* U-Boot SPL 2017.01 -*/ -#ifdef CONFIG_DEBUG_UART -printch (' ' ); -#endif }int cpu_has_64bit (void )
Signature · 1 line
2.7.4
PATCH v2 10/14 x86: tsc: Introduce config option for early timer frequency
In reply to Bin MengSo far the TSC timer driver supports trying hardware calibration first and using device tree as last resort for its running frequency as the normal timer.
However when it is used as the early timer, it only supports hardware calibration and if it fails, the driver just panics. This introduces a new config option to specify the early timer frequency in MHz and it should be equal to the value described in the device tree.
Without this patch, the travis-ci testing on QEMU x86_64 target fails each time after it finishes the 'bootefi selftest' as the test.py see an error was emitted on the console like this:
TSC frequency is ZERO
resetting ...
### ERROR ### Please RESET the board ###
It's strange that this error is consistently seen on the travis-ci machine, but only occasionally seen on my local machine (maybe 1 out of 10). Since QEMU x86_64 target enables BOOTSTAGE support which uses early timer, with this fix it should work without any failure.
---
Changes in v2:
- Change to use MHz instead of Hz for the early timer frequency
drivers/timer/Kconfig | 10 ++++++++++ drivers/timer/tsc_timer.c | 6 +++--- 2 files changed, 13 insertions(+), 3 deletions(-)
drivers/timer/Kconfig +10 -0
@@ -82,6 +82,16 @@ config X86_TSC_TIMER help Select this to enable Time-Stamp Counter (TSC) timer for x86. +config X86_TSC_TIMER_EARLY_FREQ + int "x86 TSC timer frequency in MHz when used as the early timer" + depends on X86_TSC_TIMER + default 1000 + help + Sets the estimated CPU frequency in MHz when TSC is used as the + early timer and the frequency can neither be calibrated via some + hardware ways, nor got from device tree at the time when device + tree is not available yet. + config OMAP_TIMER bool "Omap timer support" depends on TIMER
drivers/timer/tsc_timer.c +3 -3
@@ -341,7 +341,7 @@ static int tsc_timer_get_count(struct udevice *dev, u64 *count)return 0 ; } -static void tsc_timer_ensure_setup (bool stop) +static void tsc_timer_ensure_setup (bool early) {if (gd->arch.tsc_base)return ;
@@ -362,8 +362,8 @@ static void tsc_timer_ensure_setup(bool stop)if (fast_calibrate) goto done; -if (stop) -panic ("TSC frequency is ZERO" ); +if (early) + fast_calibrate =CONFIG_X86_TSC_TIMER_EARLY_FREQ ;else return ;
Signature · 1 line
2.7.4
PATCH v2 10/14 x86: tsc: Introduce config option for early timer frequency
Quoted 24 lines · Bin Meng
So far the TSC timer driver supports trying hardware calibration first and using device tree as last resort for its running frequency as the normal timer.
However when it is used as the early timer, it only supports hardware calibration and if it fails, the driver just panics. This introduces a new config option to specify the early timer frequency in MHz and it should be equal to the value described in the device tree.
Without this patch, the travis-ci testing on QEMU
x86_64target fails each time after it finishes the 'bootefi selftest' as thetest.pysee an error was emitted on the console like this:TSC frequency is ZERO
resetting ...
### ERROR ### Please RESET the board ###It's strange that this error is consistently seen on the travis-ci machine, but only occasionally seen on my local machine (maybe 1 out of 10). Since QEMU
x86_64target enables BOOTSTAGE support which uses early timer, with this fix it should work without any failure.Signed-off-by Bin Meng <[email protected]>
Quoted 8 lines
---
Changes in v2:
- Change to use MHz instead of Hz for the early timer frequencydrivers/timer/Kconfig | 10 ++++++++++ drivers/timer/tsc_timer.c | 6 +++--- 2 files changed, 13 insertions(+), 3 deletions(-)
PATCH v2 11/14 x86: quark: Specify X86_TSC_TIMER_EARLY_FREQ
In reply to Bin MengSpecify X86_TSC_TIMER_EARLY_FREQ for Quark SoC so that TSC as the early timer can be supported.
---
Changes in v2:
- Change the config option value to 400 which indicates 400 MHz
arch/x86/cpu/quark/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)
arch/x86/cpu/quark/Kconfig +4 -0
@@ -130,4 +130,8 @@ config SYS_CAR_SIZE Space in bytes in eSRAM used as Cache-As-ARM (CAR). Note this size must not exceed eSRAM's total size. +config X86_TSC_TIMER_EARLY_FREQ + int + default 400 + endif
Signature · 1 line
2.7.4
PATCH v2 11/14 x86: quark: Specify X86_TSC_TIMER_EARLY_FREQ
Quoted 5 lines · Bin Meng
Specify
X86_TSC_TIMER_EARLY_FREQfor Quark SoC so that TSC as the early timer can be supported.Signed-off-by Bin Meng <[email protected]>
Quoted 7 lines
---
Changes in v2:
- Change the config option value to 400 which indicates 400 MHzarch/x86/cpu/quark/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)
PATCH v2 12/14 travis: Generate grub_x64.efi for qemu-x86_64
In reply to Bin Menggrub_x86.efi is for 32-bit QEMU. Generate the 64-bit one.
---
Changes in v2:
- new patch to generate grub_x64.efi for qemu-x86_64 for travis-ci
.travis.yml | 3 +++ 1 file changed, 3 insertions(+)
.travis.yml +3 -0
@@ -23,6 +23,7 @@ addons: - libpython-dev - iasl - grub-efi-ia32-bin + - grub-efi-amd64-bin - rpm2cpio - wget - device-tree-compiler
@@ -49,6 +50,7 @@ install: - pip install pytest - pip install python-subunit - grub-mkimage -o ~/grub_x86.efi -O i386-efi normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd + - grub-mkimage -o ~/grub_x64.efi -O x86_64-efi normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd - mkdir ~/grub2-arm - ( cd ~/grub2-arm; wget -O - http://download.opensuse.org/ports/armv7hl/distribution/leap/42.2/repo/oss/suse/armv7hl/grub2-arm-efi-2.02~beta2-87.1.armv7hl.rpm | rpm2cpio | cpio -di ) - mkdir ~/grub2-arm64
@@ -121,6 +123,7 @@ script: # value. - export UBOOT_TRAVIS_BUILD_DIR=`cd .. && pwd`/.bm-work/${TEST_PY_BD}; cp ~/grub_x86.efi $UBOOT_TRAVIS_BUILD_DIR/; + cp ~/grub_x64.efi $UBOOT_TRAVIS_BUILD_DIR/; cp ~/grub2-arm/usr/lib/grub2/arm-efi/grub.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm.efi; cp ~/grub2-arm64/usr/lib/grub2/arm64-efi/grub.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm64.efi; if [[ "${TEST_PY_BD}" != "" ]]; then
Signature · 1 line
2.7.4
PATCH v2 12/14 travis: Generate grub_x64.efi for qemu-x86_64
Quoted 11 lines · Bin Meng
grub_x86.efi is for 32-bit QEMU. Generate the 64-bit one.
Signed-off-by Bin Meng <[email protected]>---
Changes in v2:
- new patch to generate grub_x64.efi for qemu-x86_64 for travis-ci.travis.yml | 3 +++ 1 file changed, 3 insertions(+)
PATCH v2 13/14 travis: Update to use QEMU 3.0.0 for testing
In reply to Bin MengThis updates travis-ci to use QEMU 3.0.0 for testing.
---
Changes in v2:
- new patch to update to use QEMU 3.0.0 for travis-ci testing
.travis.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
.travis.yml +1 -1
@@ -98,7 +98,7 @@ before_script: git clone git://git.qemu.org/qemu.git /tmp/qemu; pushd /tmp/qemu; git submodule update --init dtc && - git checkout v2.8.0-rc3 && + git checkout v3.0.0 && ./configure --prefix=/tmp/qemu-install --target-list=${QEMU_TARGET} && make -j4 all install; popd;
Signature · 1 line
2.7.4
PATCH v2 13/14 travis: Update to use QEMU 3.0.0 for testing
Quoted 11 lines · Bin Meng
This updates travis-ci to use QEMU 3.0.0 for testing.
Signed-off-by Bin Meng <[email protected]>---
Changes in v2:
- new patch to update to use QEMU 3.0.0 for travis-ci testing.travis.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
PATCH v2 14/14 travis: Add qemu-x86_64 target for test.py testing
In reply to Bin MengAdd qemu-x86_64 to the list of targets we use for test.py runs.
---
Changes in v2: None
.travis.yml | 8 ++++++++ 1 file changed, 8 insertions(+)
.travis.yml +8 -0
@@ -412,6 +412,14 @@ matrix: BUILDMAN="^qemu-x86$" TOOLCHAIN="x86_64" BUILD_ROM="yes" + - name: "test/py qemu-x86_64" + env: + - TEST_PY_BD="qemu-x86_64" + TEST_PY_TEST_SPEC="not sleep" + QEMU_TARGET="x86_64-softmmu" + BUILDMAN="^qemu-x86_64$" + TOOLCHAIN="x86_64" + BUILD_ROM="yes" - name: "test/py zynq_zc702" env: - TEST_PY_BD="zynq_zc702"
Signature · 1 line
2.7.4
PATCH v2 14/14 travis: Add qemu-x86_64 target for test.py testing
Quoted 10 lines · Bin Meng
Add qemu-x86_64 to the list of targets we use for
test.pyruns.Signed-off-by Bin Meng <[email protected]>---
Changes in v2: None
.travis.yml | 8 ++++++++ 1 file changed, 8 insertions(+)
v2 cover x86: Bring qemu-x86_64 target in travis-ci build/testing
In reply to Bin MengQuoted 32 lines · Bin Meng
At present the QEMU
x86_64target is broken here and there, for example with newer compiler it even does not boot. EFI loader does not work either.This series is a combination of Heinrich's EFI loader fixes and my fixes to QEMU
x86_64target. To enable qemu-x86_64 target in travis-ci for build and testing, uboot-test-hooks needs to be updated and the PR is sent.The series is available at u-boot-x86/qemu-working for testing.
Changes in v2:
- some rewording in the doc per Heinrich's review comments
- Change to use MHz instead of Hz for the early timer frequency
- Change the config option value to 400 which indicates 400 MHz
- new patch to generate grub_x64.efi for qemu-x86_64 for travis-ci
- new patch to update to use QEMU 3.0.0 for travis-ci testingBin Meng (10):
x86: Specify -march=core2 to build 64-bit U-Boot proper
x86: Ensure no instruction sets of MMX/SSE are generated in 64-bit
build
x86: doc: Mention qemu-x86_64 support
x86: doc: Remove stale sections of 64-bit support
x86: Fix the mystery ofprintch()during 64-bit boot
x86: tsc: Introduce config option for early timer frequency
x86: quark: SpecifyX86_TSC_TIMER_EARLY_FREQ
travis: Generate grub_x64.efi for qemu-x86_64
travis: Update to use QEMU 3.0.0 for testing
travis: Add qemu-x86_64 target fortest.pytesting
Quoted 6 lines
Heinrich Schuchardt (4):
x86: qemu: enableCONFIG_SPL_DM_RTC
x86: detect unsupported relocation types
x86: put global data pointer into the .data section
efi_loader: fix relocation onx86_64
Series applied to u-boot-x86, thanks!