Skip to contentSkip to conversation

update Mediatek MT2712 clock

PATCH In review Weiyi Lu 2 participants 10 messages Sep 20, 2018 – Oct 18, 2018

Subsystems (3)
lore
Share & tools
lore

Weiyi Lu

author
#0 lore raw

cover update Mediatek MT2712 clock

This series is based on v4.19-rc1.
Basically, it's for the 3rd ECO design change of MT2712. And also add support for switching pll reference source for some MT2712 projects.

author
#1 lore raw

cover update Mediatek MT2712 clock

This series is based on v4.19-rc1.
Basically, it's for the 3rd ECO design change of MT2712. And also add support for switching pll reference source for some MT2712 projects.

*** BLURB HERE ***

Weiyi Lu (3):
dt-bindings: clock: add clock for MT2712
clk: mediatek: update clock driver of MT2712
clk: mediatek: mt2712: add pll reference support

 drivers/clk/mediatek/clk-mt2712.c      | 95 ++++++++++++++++++++++++++--------
 include/dt-bindings/clock/mt2712-clk.h |  3 +-
 2 files changed, 76 insertions(+), 22 deletions(-)
Signature · 1 line
2.12.5.2.gbdf23ab
author
#2 lore raw

PATCH 1/3 dt-bindings: clock: add clock for MT2712

In reply to Weiyi Lu

Add new clock according to 3rd ECO design change.
It's the parent clock of audio clock mux.

---
 include/dt-bindings/clock/mt2712-clk.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/dt-bindings/clock/mt2712-clk.h +2 -1
index 76265836a1e1..c3b29dff9c0e 100644
@@ -228,7 +228,8 @@
 #define CLK_TOP_NFI2X_EN		189
 #define CLK_TOP_NFIECC_EN		190
 #define CLK_TOP_NFI1X_CK_EN		191
-#define CLK_TOP_NR_CLK			192
+#define CLK_TOP_APLL2_D3		192
+#define CLK_TOP_NR_CLK			193
 
 /* INFRACFG */
 
Signature · 1 line
2.12.5.2.gbdf23ab
author
#3 lore raw

PATCH 2/3 clk: mediatek: update clock driver of MT2712

In reply to Weiyi Lu

According to 3rd ECO design change,
1. Add new fixed factor clock of audio.
2. Add the parent clocks for audio clock mux.

---
 drivers/clk/mediatek/clk-mt2712.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/clk/mediatek/clk-mt2712.c +6 -2
index 991d4093726e..e36f4aab634d 100644
@@ -223,6 +223,8 @@ static const struct mtk_fixed_factor top_divs[] = {
 		4),
 	FACTOR(CLK_TOP_APLL1_D3, "apll1_d3", "apll1_ck", 1,
 		3),
+	FACTOR(CLK_TOP_APLL2_D3, "apll2_d3", "apll2_ck", 1,
+		3),
 };
 
 static const char * const axi_parents[] = {
@@ -594,7 +596,8 @@ static const char * const a1sys_hp_parents[] = {
 	"apll1_ck",
 	"apll1_d2",
 	"apll1_d4",
-	"apll1_d8"
+	"apll1_d8",
+	"apll1_d3"
 };
 
 static const char * const a2sys_hp_parents[] = {
@@ -602,7 +605,8 @@ static const char * const a2sys_hp_parents[] = {
 	"apll2_ck",
 	"apll2_d2",
 	"apll2_d4",
-	"apll2_d8"
+	"apll2_d8",
+	"apll2_d3"
 };
 
 static const char * const asm_l_parents[] = {
Signature · 1 line
2.12.5.2.gbdf23ab
author
#4 lore raw

PATCH 3/3 clk: mediatek: mt2712: add pll reference support

In reply to Weiyi Lu

For some MT2712 projects, audpll could select another reference clock source if there exists an extra Crystal Oscillators than the default clk26m XTAL.
Declare with the property "mediatek,refclk-aud" to switch the audpll reference clock.
And also support to modify the reference clock of all PLL with property "mediatek,refclk" instead of the default source "clk26m".

---
 drivers/clk/mediatek/clk-mt2712.c | 87 ++++++++++++++++++++++++++++++---------
 1 file changed, 68 insertions(+), 19 deletions(-)
drivers/clk/mediatek/clk-mt2712.c +68 -19
index e36f4aab634d..2a4db1718089 100644
@@ -1174,7 +1174,7 @@ static const struct mtk_gate peri_clks[] = {
 #define PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits,	\
 			_pd_reg, _pd_shift, _tuner_reg, _tuner_en_reg,	\
 			_tuner_en_bit, _pcw_reg, _pcw_shift,		\
-			_div_table) {					\
+			_div_table, _parent_name) {			\
 		.id = _id,						\
 		.name = _name,						\
 		.reg = _reg,						\
@@ -1192,15 +1192,17 @@ static const struct mtk_gate peri_clks[] = {
 		.pcw_reg = _pcw_reg,					\
 		.pcw_shift = _pcw_shift,				\
 		.div_table = _div_table,				\
+		.parent_name = _parent_name,				\
 	}
 
 #define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits,	\
 			_pd_reg, _pd_shift, _tuner_reg, _tuner_en_reg,	\
-			_tuner_en_bit, _pcw_reg, _pcw_shift)		\
+			_tuner_en_bit, _pcw_reg, _pcw_shift,		\
+			_parent_name)					\
 		PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags,	\
 			_pcwbits, _pd_reg, _pd_shift, _tuner_reg,	\
 			_tuner_en_reg, _tuner_en_bit, _pcw_reg,		\
-			_pcw_shift, NULL)
+			_pcw_shift, NULL, _parent_name)
 
 static const struct mtk_pll_div_table armca35pll_div_table[] = {
 	{ .div = 0, .freq = MT2712_PLL_FMAX },
@@ -1229,48 +1231,95 @@ static const struct mtk_pll_div_table mmpll_div_table[] = {
 	{ } /* sentinel */
 };
 
-static const struct mtk_pll_data plls[] = {
+static struct mtk_pll_data plls[] = {
 	PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x0230, 0x023C, 0xf0000101,
-		HAVE_RST_BAR, 31, 0x0230, 4, 0, 0, 0, 0x0234, 0),
+		HAVE_RST_BAR, 31, 0x0230, 4, 0, 0, 0, 0x0234, 0, "clk26m"),
 	PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x0240, 0x024C, 0xfe000101,
-		HAVE_RST_BAR, 31, 0x0240, 4, 0, 0, 0, 0x0244, 0),
+		HAVE_RST_BAR, 31, 0x0240, 4, 0, 0, 0, 0x0244, 0, "clk26m"),
 	PLL(CLK_APMIXED_VCODECPLL, "vcodecpll", 0x0320, 0x032C, 0xc0000101,
-		0, 31, 0x0320, 4, 0, 0, 0, 0x0324, 0),
+		0, 31, 0x0320, 4, 0, 0, 0, 0x0324, 0, "clk26m"),
 	PLL(CLK_APMIXED_VENCPLL, "vencpll", 0x0280, 0x028C, 0x00000101,
-		0, 31, 0x0280, 4, 0, 0, 0, 0x0284, 0),
+		0, 31, 0x0280, 4, 0, 0, 0, 0x0284, 0, "clk26m"),
 	PLL(CLK_APMIXED_APLL1, "apll1", 0x0330, 0x0340, 0x00000101,
-		0, 31, 0x0330, 4, 0x0338, 0x0014, 0, 0x0334, 0),
+		0, 31, 0x0330, 4, 0x0338, 0x0014, 0, 0x0334, 0, "clk26m"),
 	PLL(CLK_APMIXED_APLL2, "apll2", 0x0350, 0x0360, 0x00000101,
-		0, 31, 0x0350, 4, 0x0358, 0x0014, 1, 0x0354, 0),
+		0, 31, 0x0350, 4, 0x0358, 0x0014, 1, 0x0354, 0, "clk26m"),
 	PLL(CLK_APMIXED_LVDSPLL, "lvdspll", 0x0370, 0x037c, 0x00000101,
-		0, 31, 0x0370, 4, 0, 0, 0, 0x0374, 0),
+		0, 31, 0x0370, 4, 0, 0, 0, 0x0374, 0, "clk26m"),
 	PLL(CLK_APMIXED_LVDSPLL2, "lvdspll2", 0x0390, 0x039C, 0x00000101,
-		0, 31, 0x0390, 4, 0, 0, 0, 0x0394, 0),
+		0, 31, 0x0390, 4, 0, 0, 0, 0x0394, 0, "clk26m"),
 	PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x0270, 0x027C, 0x00000101,
-		0, 31, 0x0270, 4, 0, 0, 0, 0x0274, 0),
+		0, 31, 0x0270, 4, 0, 0, 0, 0x0274, 0, "clk26m"),
 	PLL(CLK_APMIXED_MSDCPLL2, "msdcpll2", 0x0410, 0x041C, 0x00000101,
-		0, 31, 0x0410, 4, 0, 0, 0, 0x0414, 0),
+		0, 31, 0x0410, 4, 0, 0, 0, 0x0414, 0, "clk26m"),
 	PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x0290, 0x029C, 0xc0000101,
-		0, 31, 0x0290, 4, 0, 0, 0, 0x0294, 0),
+		0, 31, 0x0290, 4, 0, 0, 0, 0x0294, 0, "clk26m"),
 	PLL_B(CLK_APMIXED_MMPLL, "mmpll", 0x0250, 0x0260, 0x00000101,
 		0, 31, 0x0250, 4, 0, 0, 0, 0x0254, 0,
-		mmpll_div_table),
+		mmpll_div_table, "clk26m"),
 	PLL_B(CLK_APMIXED_ARMCA35PLL, "armca35pll", 0x0100, 0x0110, 0xf0000101,
 		HAVE_RST_BAR, 31, 0x0100, 4, 0, 0, 0, 0x0104, 0,
-		armca35pll_div_table),
+		armca35pll_div_table, "clk26m"),
 	PLL_B(CLK_APMIXED_ARMCA72PLL, "armca72pll", 0x0210, 0x0220, 0x00000101,
 		0, 31, 0x0210, 4, 0, 0, 0, 0x0214, 0,
-		armca72pll_div_table),
+		armca72pll_div_table, "clk26m"),
 	PLL(CLK_APMIXED_ETHERPLL, "etherpll", 0x0300, 0x030C, 0xc0000101,
-		0, 31, 0x0300, 4, 0, 0, 0, 0x0304, 0),
+		0, 31, 0x0300, 4, 0, 0, 0, 0x0304, 0, "clk26m"),
 };
 
+static void clk_mt2712_set_pll_reference(struct device_node *node,
+		struct mtk_pll_data *plls, size_t num_plls)
+{
+	void __iomem *base, *sel_addr;
+	struct of_phandle_args refclk, refclk_aud;
+	const char *refclk_name = "clk26m";
+	const char *refclk_aud_name;
+	int rc;
+	size_t i;
+	u32 r;
+
+	base = of_iomap(node, 0);
+	if (base) {
+		sel_addr = base + 0x40;
+	} else {
+		pr_err("%s(): ioremap failed\n", __func__);
+		return;
+	}
+
+	rc = of_parse_phandle_with_args(node, "mediatek,refclk",
+			"#clock-cells", 0, &refclk);
+	if (!rc) {
+		of_property_read_string(refclk.np, "clock-output-names",
+				&refclk_name);
+		for (i = 0; i < num_plls; i++)
+			plls[i].parent_name = refclk_name;
+	}
+
+	rc = of_parse_phandle_with_args(node, "mediatek,refclk-aud",
+			"#clock-cells", 0, &refclk_aud);
+	if (!rc) {
+		of_property_read_string(refclk_aud.np, "clock-output-names",
+				&refclk_aud_name);
+		if (strcmp(refclk_name, refclk_aud_name)) {
+			plls[CLK_APMIXED_APLL1].parent_name = refclk_aud_name;
+			plls[CLK_APMIXED_APLL2].parent_name = refclk_aud_name;
+			r = readl(sel_addr) | 0x60000;
+		} else {
+			r = readl(sel_addr) & ~0x60000;
+		}
+
+		writel(r, sel_addr);
+	}
+}
+
 static int clk_mt2712_apmixed_probe(struct platform_device *pdev)
 {
 	struct clk_onecell_data *clk_data;
 	int r;
 	struct device_node *node = pdev->dev.of_node;
 
+	clk_mt2712_set_pll_reference(node, plls, ARRAY_SIZE(plls));
+
 	clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
 
 	mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
Signature · 1 line
2.12.5.2.gbdf23ab
maintainer
#5 lore raw

Re: [PATCH v1 3/3] clk: mediatek: mt2712: add pll reference support

Quoting Weiyi Lu (2018-09-20 02:57:27)

Quoted 14 lines

For some MT2712 projects, audpll could select another reference clock source if there exists an extra Crystal Oscillators than the default clk26m XTAL.
Declare with the property "mediatek,refclk-aud" to switch the audpll reference clock.
And also support to modify the reference clock of all PLL with property "mediatek,refclk" instead of the default source "clk26m".

---

drivers/clk/mediatek/clk-mt2712.c +0 -0
index e36f4aab634d..2a4db1718089 100644

[...]

drivers/clk/mediatek/clk-mt2712.c static const struct mtk_pll_div_table mmpll_div_table[] = { · line 1287

Quoted 10 lines
drivers/clk/mediatek/clk-mt2712.c +10 -0
+       size_t i;
+       u32 r;
+
+       base = of_iomap(node, 0);
+       if (base) {
+               sel_addr = base + 0x40;
+       } else {
+               pr_err("%s(): ioremap failed\n", __func__);
+               return;
+       }

Nitpick: Write this as

	base = of_iomap();
	if (!base)
		return;
	sel_addr = base + 0x40;

drivers/clk/mediatek/clk-mt2712.c static const struct mtk_pll_div_table mmpll_div_table[] = { · line 1295

Quoted 8 lines
drivers/clk/mediatek/clk-mt2712.c +8 -0
+
+       rc = of_parse_phandle_with_args(node, "mediatek,refclk",
+                       "#clock-cells", 0, &refclk);
+       if (!rc) {
+               of_property_read_string(refclk.np, "clock-output-names",
+                               &refclk_name);
+               for (i = 0; i < num_plls; i++)
+                       plls[i].parent_name = refclk_name;

Use of_clk_parent_fill()?

drivers/clk/mediatek/clk-mt2712.c static const struct mtk_pll_div_table mmpll_div_table[] = { · line 1299

Quoted 4 lines
drivers/clk/mediatek/clk-mt2712.c +4 -0
+       }
+
+       rc = of_parse_phandle_with_args(node, "mediatek,refclk-aud",
+                       "#clock-cells", 0, &refclk_aud);

This is odd. Is this a custom 'clocks' property? What's going on here? Why can't we use assigned clock parents for this?

Quoted 15 lines
drivers/clk/mediatek/clk-mt2712.c +15 -0
+       if (!rc) {
+               of_property_read_string(refclk_aud.np, "clock-output-names",
+                               &refclk_aud_name);
+               if (strcmp(refclk_name, refclk_aud_name)) {
+                       plls[CLK_APMIXED_APLL1].parent_name = refclk_aud_name;
+                       plls[CLK_APMIXED_APLL2].parent_name = refclk_aud_name;
+                       r = readl(sel_addr) | 0x60000;
+               } else {
+                       r = readl(sel_addr) & ~0x60000;
+               }
+
+               writel(r, sel_addr);
+       }
+}
+
author
#6 lore raw

[SPAM]Re: [PATCH v1 3/3] clk: mediatek: mt2712: add pll reference support

Quoted 27 lines · Stephen Boyd

Quoting Weiyi Lu (2018-09-20 02:57:27)

Quoted 14 lines

For some MT2712 projects, audpll could select another reference clock source if there exists an extra Crystal Oscillators than the default clk26m XTAL.
Declare with the property "mediatek,refclk-aud" to switch the audpll reference clock.
And also support to modify the reference clock of all PLL with property "mediatek,refclk" instead of the default source "clk26m".

---

drivers/clk/mediatek/clk-mt2712.c +0 -0
index e36f4aab634d..2a4db1718089 100644

[...]

drivers/clk/mediatek/clk-mt2712.c static const struct mtk_pll_div_table mmpll_div_table[] = { · line 1287

Quoted 10 lines
drivers/clk/mediatek/clk-mt2712.c +10 -0
+       size_t i;
+       u32 r;
+
+       base = of_iomap(node, 0);
+       if (base) {
+               sel_addr = base + 0x40;
+       } else {
+               pr_err("%s(): ioremap failed\n", __func__);
+               return;
+       }
Quoted 7 lines

Nitpick: Write this as

	base = of_iomap();
	if (!base)
		return;
	sel_addr = base + 0x40;

Got it, I'll fix it.

Quoted 11 lines

drivers/clk/mediatek/clk-mt2712.c static const struct mtk_pll_div_table mmpll_div_table[] = { · line 1295

Quoted 8 lines
drivers/clk/mediatek/clk-mt2712.c +8 -0
+
+       rc = of_parse_phandle_with_args(node, "mediatek,refclk",
+                       "#clock-cells", 0, &refclk);
+       if (!rc) {
+               of_property_read_string(refclk.np, "clock-output-names",
+                               &refclk_name);
+               for (i = 0; i < num_plls; i++)
+                       plls[i].parent_name = refclk_name;

Use of_clk_parent_fill()?

Thanks for the hint, i might use of_clk_get_parent_name() instead like below to get each parent clock name.
refclk_name = of_clk_get_parent_name(node, 0); refclk_aud_name = of_clk_get_parent_name(node, 1);

Quoted 7 lines

drivers/clk/mediatek/clk-mt2712.c static const struct mtk_pll_div_table mmpll_div_table[] = { · line 1299

Quoted 4 lines
drivers/clk/mediatek/clk-mt2712.c +4 -0
+       }
+
+       rc = of_parse_phandle_with_args(node, "mediatek,refclk-aud",
+                       "#clock-cells", 0, &refclk_aud);

This is odd. Is this a custom 'clocks' property? What's going on here? Why can't we use assigned clock parents for this?

Yes. both the reference clock of all PLL and the reference clock of audio PLL could be customized.These two reference clocks shall be provided by some component like crystal oscillators on the board. So we might unable to switch the PLL reference source at runtime, in other words, it should be set statically. That's why we didn't provide the set_parent ops for pll clock type. It's also the main reason we choose not to use assigned-clock-parents for this requirement.

Quoted 15 lines
Quoted 15 lines
drivers/clk/mediatek/clk-mt2712.c +15 -0
+       if (!rc) {
+               of_property_read_string(refclk_aud.np, "clock-output-names",
+                               &refclk_aud_name);
+               if (strcmp(refclk_name, refclk_aud_name)) {
+                       plls[CLK_APMIXED_APLL1].parent_name = refclk_aud_name;
+                       plls[CLK_APMIXED_APLL2].parent_name = refclk_aud_name;
+                       r = readl(sel_addr) | 0x60000;
+               } else {
+                       r = readl(sel_addr) & ~0x60000;
+               }
+
+               writel(r, sel_addr);
+       }
+}
+
maintainer
#7 lore raw

[SPAM]Re: [PATCH v1 3/3] clk: mediatek: mt2712: add pll reference support

Quoting Weiyi Lu (2018-10-17 06:53:12)

Quoted 11 lines · Stephen Boyd
Quoted 10 lines

Quoting Weiyi Lu (2018-09-20 02:57:27)

Quoted 8 lines
drivers/clk/mediatek/clk-mt2712.c +8 -0
+
+       rc = of_parse_phandle_with_args(node, "mediatek,refclk",
+                       "#clock-cells", 0, &refclk);
+       if (!rc) {
+               of_property_read_string(refclk.np, "clock-output-names",
+                               &refclk_name);
+               for (i = 0; i < num_plls; i++)
+                       plls[i].parent_name = refclk_name;
Quoted 6 lines
Quoted 2 lines

Use of_clk_parent_fill()?

Thanks for the hint, i might use of_clk_get_parent_name() instead like below to get each parent clock name.
refclk_name = of_clk_get_parent_name(node, 0); refclk_aud_name = of_clk_get_parent_name(node, 1);

Alright.

Quoted 8 lines
Quoted 8 lines

drivers/clk/mediatek/clk-mt2712.c static const struct mtk_pll_div_table mmpll_div_table[] = { · line 1299

Quoted 5 lines
drivers/clk/mediatek/clk-mt2712.c +4 -0
+       }
+
+       rc = of_parse_phandle_with_args(node, "mediatek,refclk-aud",
+                       "#clock-cells", 0, &refclk_aud);

This is odd. Is this a custom 'clocks' property? What's going on here? Why can't we use assigned clock parents for this?

Quoted 8 lines

Yes. both the reference clock of all PLL and the reference clock of audio PLL could be customized.These two reference clocks shall be provided by some component like crystal oscillators on the board. So we might unable to switch the PLL reference source at runtime, in other words, it should be set statically. That's why we didn't provide the set_parent ops for pll clock type. It's also the main reason we choose not to use assigned-clock-parents for this requirement.

Ok. Do you need some new software clk flag that indicates we should "lock" the parent or rate configured at boot time? I would like to see this driver implement the clk_ops for the hardware and have the framework be the one that configures the tree, instead of doing it some custom way for this single driver.

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
drivers/clk/mediatek/clk-mt2712.c +5 -0
+       if (!rc) {
+               of_property_read_string(refclk_aud.np, "clock-output-names",
+                               &refclk_aud_name);
+               if (strcmp(refclk_name, refclk_aud_name)) {
+                       plls[CLK_APMIXED_APLL1].parent_name = refclk_aud_name;
author
#8 lore raw

[SPAM]Re: [PATCH v1 3/3] clk: mediatek: mt2712: add pll reference support

Quoted 38 lines · Stephen Boyd

Quoting Weiyi Lu (2018-10-17 06:53:12)

Quoted 11 lines · Stephen Boyd
Quoted 10 lines

Quoting Weiyi Lu (2018-09-20 02:57:27)

Quoted 8 lines
drivers/clk/mediatek/clk-mt2712.c +8 -0
+
+       rc = of_parse_phandle_with_args(node, "mediatek,refclk",
+                       "#clock-cells", 0, &refclk);
+       if (!rc) {
+               of_property_read_string(refclk.np, "clock-output-names",
+                               &refclk_name);
+               for (i = 0; i < num_plls; i++)
+                       plls[i].parent_name = refclk_name;
Quoted 6 lines
Quoted 2 lines

Use of_clk_parent_fill()?

Thanks for the hint, i might use of_clk_get_parent_name() instead like below to get each parent clock name.
refclk_name = of_clk_get_parent_name(node, 0); refclk_aud_name = of_clk_get_parent_name(node, 1);

Alright.

Quoted 8 lines
Quoted 8 lines

drivers/clk/mediatek/clk-mt2712.c static const struct mtk_pll_div_table mmpll_div_table[] = { · line 1299

Quoted 5 lines
drivers/clk/mediatek/clk-mt2712.c +4 -0
+       }
+
+       rc = of_parse_phandle_with_args(node, "mediatek,refclk-aud",
+                       "#clock-cells", 0, &refclk_aud);

This is odd. Is this a custom 'clocks' property? What's going on here? Why can't we use assigned clock parents for this?

Quoted 8 lines

Yes. both the reference clock of all PLL and the reference clock of audio PLL could be customized.These two reference clocks shall be provided by some component like crystal oscillators on the board. So we might unable to switch the PLL reference source at runtime, in other words, it should be set statically. That's why we didn't provide the set_parent ops for pll clock type. It's also the main reason we choose not to use assigned-clock-parents for this requirement.

Quoted 6 lines

Ok. Do you need some new software clk flag that indicates we should "lock" the parent or rate configured at boot time? I would like to see this driver implement the clk_ops for the hardware and have the framework be the one that configures the tree, instead of doing it some custom way for this single driver.

Hi Stephen, do you mean we might be able to add a flag just like CLK_IS_CRITICAL and how it works on clk_enable & clk_disable ops? And should we make this new flag to allow to set parent before clock is registered and prohibit from changing the rate and parent after clock registration. If my understanding is correct, I'll give a try. BTW, how about the two patch for the ECO change before this patch. Is there any problem on those two patches?

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
drivers/clk/mediatek/clk-mt2712.c +5 -0
+       if (!rc) {
+               of_property_read_string(refclk_aud.np, "clock-output-names",
+                               &refclk_aud_name);
+               if (strcmp(refclk_name, refclk_aud_name)) {
+                       plls[CLK_APMIXED_APLL1].parent_name = refclk_aud_name;
maintainer
#9 lore raw

[SPAM]Re: [PATCH v1 3/3] clk: mediatek: mt2712: add pll reference support

Quoting Weiyi Lu (2018-10-17 23:00:17)

Quoted 45 lines · Stephen Boyd
Quoted 38 lines

Quoting Weiyi Lu (2018-10-17 06:53:12)

Quoted 11 lines · Stephen Boyd
Quoted 10 lines

Quoting Weiyi Lu (2018-09-20 02:57:27)

Quoted 8 lines
drivers/clk/mediatek/clk-mt2712.c +8 -0
+
+       rc = of_parse_phandle_with_args(node, "mediatek,refclk",
+                       "#clock-cells", 0, &refclk);
+       if (!rc) {
+               of_property_read_string(refclk.np, "clock-output-names",
+                               &refclk_name);
+               for (i = 0; i < num_plls; i++)
+                       plls[i].parent_name = refclk_name;
Quoted 6 lines
Quoted 2 lines

Use of_clk_parent_fill()?

Thanks for the hint, i might use of_clk_get_parent_name() instead like below to get each parent clock name.
refclk_name = of_clk_get_parent_name(node, 0); refclk_aud_name = of_clk_get_parent_name(node, 1);

Alright.

Quoted 8 lines
Quoted 8 lines

drivers/clk/mediatek/clk-mt2712.c static const struct mtk_pll_div_table mmpll_div_table[] = { · line 1299

Quoted 5 lines
drivers/clk/mediatek/clk-mt2712.c +4 -0
+       }
+
+       rc = of_parse_phandle_with_args(node, "mediatek,refclk-aud",
+                       "#clock-cells", 0, &refclk_aud);

This is odd. Is this a custom 'clocks' property? What's going on here? Why can't we use assigned clock parents for this?

Quoted 8 lines

Yes. both the reference clock of all PLL and the reference clock of audio PLL could be customized.These two reference clocks shall be provided by some component like crystal oscillators on the board. So we might unable to switch the PLL reference source at runtime, in other words, it should be set statically. That's why we didn't provide the set_parent ops for pll clock type. It's also the main reason we choose not to use assigned-clock-parents for this requirement.

Quoted 6 lines

Ok. Do you need some new software clk flag that indicates we should "lock" the parent or rate configured at boot time? I would like to see this driver implement the clk_ops for the hardware and have the framework be the one that configures the tree, instead of doing it some custom way for this single driver.

Quoted 5 lines

Hi Stephen, do you mean we might be able to add a flag just like CLK_IS_CRITICAL and how it works on clk_enable & clk_disable ops? And should we make this new flag to allow to set parent before clock is registered and prohibit from changing the rate and parent after clock registration. If my understanding is correct, I'll give a try.

Mostly, yes. It would be similar to CLK_IS_CRITICAL, like CLK_CONFIGURE_ONCE or something like that. It would effectively lock the configuration after the clk is registered and any assigned parents or rates are applied.

Quoted 3 lines

BTW, how about the two patch for the ECO change before this patch. Is there any problem on those two patches?

No, those look fine. I just thought you would resend the whole series again.