selftests/resctrl: Add resctrl selftest
Subsystems (2)
v2 cover selftests/resctrl: Add resctrl selftest
With more and more resctrl features are being added by Intel, AMD and ARM, a test tool is becoming more and more useful to validate that both hardware and software functionalities work as expected.
We introduce resctrl selftest to cover resctrl features on both X86 and ARM architectures. It first implements MBM (Memory Bandwidth Monitoring) and MBA (Memory Bandwidth Allocation) tests. We can enhance the selftest tool to include more functionality tests in future.
There is an existing resctrl test suit 'intel_cmt_cat'. But the major purpose of the tool is to test Intel(R) RDT hardware via writing and reading MSR registers. It does access resctrl file system; but the functionalities are very limited. And it doesn't support automatic test and a lot of manual verifications are involved.
So the selftest tool we are introducing here provides a convenient tool which does automatic resctrl testing, is easily available in kernel tree, and will be extended to AMD QoS and ARM MPAM.
The selftest tool is in tools/testing/selftests/resctrl in order to have generic test code for all architectures.
Changelog:
v2:
- Change code based on comments from Babu Moger
- Clean up other places.
Arshiya Hayatkhan Pathan (2):
selftests/resctrl: Add mbm test
selftests/resctrl: Add mba test
Fenghua Yu (2):
selftests/resctrl: Add README for resctrl tests
selftests/resctrl: Add the test in MAINTAINERS
Sai Praneeth Prakhya (4):
selftests/resctrl: Add basic resctrl file system operations and data selftests/resctrl: Read memory bandwidth from perf IMC counter and
from resctrl file system
selftests/resctrl: Add callback to start a benchmark selftests/resctrl: Add built in benchmark
MAINTAINERS | 1 + tools/testing/selftests/resctrl/Makefile | 16 + tools/testing/selftests/resctrl/README | 53 ++ tools/testing/selftests/resctrl/fill_buf.c | 175 ++++++ tools/testing/selftests/resctrl/mba_test.c | 175 ++++++ tools/testing/selftests/resctrl/mbm_test.c | 143 +++++ tools/testing/selftests/resctrl/membw.c | 678 ++++++++++++++++++++++++ tools/testing/selftests/resctrl/resctrl.h | 88 +++ tools/testing/selftests/resctrl/resctrl_tests.c | 138 +++++ tools/testing/selftests/resctrl/resctrlfs.c | 465 ++++++++++++++++ 10 files changed, 1932 insertions(+) create mode 100644 tools/testing/selftests/resctrl/Makefile create mode 100644 tools/testing/selftests/resctrl/README create mode 100644 tools/testing/selftests/resctrl/fill_buf.c create mode 100644 tools/testing/selftests/resctrl/mba_test.c create mode 100644 tools/testing/selftests/resctrl/mbm_test.c create mode 100644 tools/testing/selftests/resctrl/membw.c create mode 100644 tools/testing/selftests/resctrl/resctrl.h create mode 100644 tools/testing/selftests/resctrl/resctrl_tests.c create mode 100644 tools/testing/selftests/resctrl/resctrlfs.c
Signature · 1 line
2.5.0
PATCH v2 1/8 selftests/resctrl: Add README for resctrl tests
resctrl tests will be implemented. README is added for the tool first.
--- tools/testing/selftests/resctrl/README | 53 ++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 tools/testing/selftests/resctrl/README
tools/testing/selftests/resctrl/README new file +53 -0
@@ -0,0 +1,53 @@ +resctrl_tests - resctrl file system test suit + +Authors: + Fenghua Yu <[email protected]> + Sai Praneeth Prakhya <[email protected]>, + Arshiya Hayatkhan Pathan <[email protected]> + +resctrl_tests tests various resctrl functionalities and interfaces including +both software and hardware. + +Currently it supports Memory Bandwidth Monitoring test and Memory Bandwidth +Allocation test on Intel RDT hardware. More tests will be added in the future. +And the test suit can be extended to cover AMD QoS and ARM MPAM hardware +as well. + +BUILD +----- + +Run "make" to build executable file "resctrl_tests". + +RUN +--- + +To use resctrl_tests, root or sudoer privileges are required. This is because +the test needs to mount resctrl file system and change contents in the file +system. + +Executing the test without any parameter will run all supported tests: + + sudo ./resctrl_tests + +OVERVIEW OF EXECUTION +--------------------- + +A test case has four stages: + + - setup: mount resctrl file system, create group, setup schemata, move test + process pids to tasks, start benchmark. + - execute: let benchmark run + - verify: get resctrl data and verify the data with another source, e.g. + perf event. + - teardown: umount resctrl and clear temporary files. + +ARGUMENTS +--------- + +Parameter '-h' shows usage information. + +usage: resctrl_tests [-h] [-b benchmark_cmd [options]] [-t test list] + -b benchmark_cmd [options]: run specified benchmark + default benchmark is builtin fill_buf + -t test list: run tests specified in the test list, e.g. -t mbm,mba + -h: help
Signature · 1 line
2.5.0
PATCH v2 2/8 selftests/resctrl: Add basic resctrl file system operations and data
In reply to Fenghua YuFrom: Sai Praneeth Prakhya <[email protected]>
The basic resctrl file system operations and data are added for future usage by resctrl selftest tool.
--- tools/testing/selftests/resctrl/Makefile | 10 + tools/testing/selftests/resctrl/resctrl.h | 53 ++++ tools/testing/selftests/resctrl/resctrlfs.c | 465 ++++++++++++++++++++++++++++ 3 files changed, 528 insertions(+) create mode 100644 tools/testing/selftests/resctrl/Makefile create mode 100644 tools/testing/selftests/resctrl/resctrl.h create mode 100644 tools/testing/selftests/resctrl/resctrlfs.c
tools/testing/selftests/resctrl/Makefile new file +10 -0
@@ -0,0 +1,10 @@ +CC = gcc +CFLAGS = -g -Wall + +*.o: *.c + $(CC) $(CFLAGS) -c *.c + +.PHONY: clean + +clean: + $(RM) *.o *~
tools/testing/selftests/resctrl/resctrl.h new file +53 -0
53 lines not on this page · raw message
tools/testing/selftests/resctrl/resctrlfs.c new file +465 -0
465 lines not on this page · raw message
Signature · 1 line
2.5.0
Moger, Babu
reviewerRE: [PATCH v2 2/8] selftests/resctrl: Add basic resctrl file system operations and data
Hi Fenghua, Sai,
Quoted 203 lines
-----Original Message-----
From: Fenghua Yu <[email protected]>
Sent: Thursday, October 25, 2018 6:07 PM
To: Thomas Gleixner <[email protected]>; Ingo Molnar <[email protected]>; H Peter Anvin <[email protected]>; Tony Luck <[email protected]>; Peter Zijlstra <[email protected]>; Reinette Chatre <[email protected]>; Moger, Babu <[email protected]>; James Morse <[email protected]>; Ravi V Shankar <[email protected]>; Sai Praneeth Prakhya <[email protected]>; Arshiya Hayatkhan Pathan <[email protected]>
Cc: linux-kernel <[email protected]>; Fenghua Yu <[email protected]>
Subject: [PATCH v2 2/8] selftests/resctrl: Add basic resctrl file system operations and dataFrom: Sai Praneeth Prakhya <[email protected]>
The basic resctrl file system operations and data are added for future usage by resctrl selftest tool.
Signed-off-by Sai Praneeth Prakhya <[email protected]>Signed-off-by Arshiya Hayatkhan PathanSigned-off-by Fenghua Yu <[email protected]>--- tools/testing/selftests/resctrl/Makefile | 10 + tools/testing/selftests/resctrl/resctrl.h | 53 ++++ tools/testing/selftests/resctrl/resctrlfs.c | 465 ++++++++++++++++++++++++++++ 3 files changed, 528 insertions(+) create mode 100644 tools/testing/selftests/resctrl/Makefile create mode 100644 tools/testing/selftests/resctrl/resctrl.h create mode 100644 tools/testing/selftests/resctrl/resctrlfs.ctools/testing/selftests/resctrl/Makefile new file +10
-0@@ -0,0 +1,10 @@ +CC = gcc +CFLAGS = -g -Wall + +*.o: *.c + $(CC) $(CFLAGS) -c *.c + +.PHONY: clean + +clean: + $(RM) *.o *~tools/testing/selftests/resctrl/resctrl.h new file +51
-0@@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#define _GNU_SOURCE +#ifndef RESCTRL_H +#define RESCTRL_H +#include <stdio.h> +#include <errno.h> +#include <sched.h> +#include <stdlib.h> +#include <unistd.h> +#include <string.h> +#include <signal.h> +#include <dirent.h> +#include <stdbool.h> +#include <sys/stat.h> +#include <sys/ioctl.h> +#include <sys/mount.h> +#include <sys/types.h> +#include <asm/unistd.h> +#include <linux/perf_event.h> + +#define MB (1024 * 1024) +#define RESCTRL_PATH "/sys/fs/resctrl" +#define PHYS_ID_PATH "/sys/devices/system/cpu/cpu" +#define RESCTRL_MBM "L3 monitoring detected" +#define RESCTRL_MBA "MB allocation detected" +#define MAX_RESCTRL_FEATURES 2 +#define RM_SIG_FILE "rm -rf sig" + +#define PARENT_EXIT (err_msg) \ + do { \ + perror(err_msg); \ + kill(ppid, SIGKILL); \ + exit(EXIT_FAILURE); \ + } while (0) + +pid_t bm_pid, ppid; +int ben_count; + +int remount_resctrlfs (bool mum_resctrlfs); +char get_sock_num (int cpu_no); +int validate_bw_report_request (char *bw_report); +int validate_resctrl_feature_request (char *resctrl_val); +int taskset_benchmark (pid_t bm_pid,int cpu_no); +void run_benchmark (int signum,siginfo_t *info,void *ucontext); +int write_schemata (char *ctrlgrp,char *schemata,int cpu_no, +char *resctrl_val); +int write_bm_pid_to_resctrl (pid_t bm_pid,char *ctrlgrp,char *mongrp, +char *resctrl_val); +int perf_event_open (struct perf_event_attr *hw_event,pid_t pid,int cpu, +int group_fd,unsigned long flags); +int run_fill_buf(int span, int malloc_and_init_memory, int memflush, intop);
tools/testing/selftests/resctrl/resctrl.h new file +2
-0+ +#endif /* RESCTRL_H */ tools/testing/selftests/resctrl/resctrlfs.c new file +47
-0@@ -0,0 +1,465 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Basic resctrl file system operations +* +* Copyright (C) 2018 Intel Corporation +* +* Authors: +* Arshiya Hayatkhan Pathan <[email protected]> +* Sai Praneeth Prakhya <[email protected]>, +* Fenghua Yu <[email protected]> +*/ +#include "resctrl.h" + +/* +* remount_resctrlfs: Remount resctrl FS at /sys/fs/resctrl +* @mum_resctrlfs: Should the resctrl FS be remounted? +* +* If not mounted, mount it. +* If mounted and mum_resctrlfs then remount resctrl FS. +* If mounted and !mum_resctrlfs then noop +* +* Return: 0 on success, non-zero on failure +*/ +int remount_resctrlfs (bool mum_resctrlfs) +{ +DIR *dp; +struct dirent *ep; +unsigned int count =0 ; + +/* +* If kernel is built with CONFIG_RESCTRL, then /sys/fs/resctrl should +* be present by default +*/ + dp =opendir (RESCTRL_PATH ); +if (dp) { +while ((ep =readdir (dp)) !=NULL ) + count++; +closedir (dp); + }else { +perror ("Unable to read /sys/fs/resctrl" ); + +return errno; + } + +/* +* If resctrl FS has more than two entries, it means that resctrl FS has +* already been mounted. The two default entries are "." and "..", these
tools/testing/selftests/resctrl/resctrlfs.c new file +35
-0+* are present even when resctrl FS is not mounted +*/ +if (count >2 ) { +if (mum_resctrlfs) { +if (umount (RESCTRL_PATH ) !=0 ) { +perror ("Unable to umount resctrl" ); + +return errno; + } +printf ("Remount: done!\n" ); + }else { +printf ("Mounted already. Not remounting!\n" ); + +return 0 ; + } + } + +if (mount ("resctrl" ,RESCTRL_PATH ,"resctrl" ,0 ,NULL ) !=0 ) { +perror ("Unable to mount resctrl FS at /sys/fs/resctrl" ); + +return errno; + } + +return 0 ; +} + +int umount_resctrlfs (void ) +{ +if (umount (RESCTRL_PATH )) { +perror ("Unable to umount resctrl" ); + +return errno; + } + +return 0 ;
tools/testing/selftests/resctrl/resctrlfs.c line 92
Quoted 10 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +10
-0+} + +char get_sock_num (int cpu_no) +{ +char sock_num, phys_pkg_path[1024 ]; +FILE *fp; + +sprintf (phys_pkg_path,"%s%d/topology/physical_package_id" , +PHYS_ID_PATH , cpu_no); + fp =fopen (phys_pkg_path,"r" );
There should corresponding fclose for this. In general, I would check all the fopens in this series. I found few of the files not closed while returning. More comments below.
Quoted 42 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +11
-0+if (!fp ||fscanf (fp,"%c" , &sock_num) <=0 ||fclose (fp) ==EOF ) { +perror ("Could not get socket number" ); + +return -1 ; + } + +return sock_num; +} + +/* +* taskset_benchmark: Taskset PID (i.e. benchmark) to a specified cpu
+ * @bm_pid: PID that should be binded
+ * @cpu_no: CPU number at which the PID would be binded
+ *
+ * Return: 0 on success, non-zero on failure
+ */tools/testing/selftests/resctrl/resctrlfs.c new file +25
-0+int taskset_benchmark (pid_t bm_pid,int cpu_no) +{ +cpu_set_t my_set; + +CPU_ZERO (&my_set); +CPU_SET (cpu_no, &my_set); + +if (sched_setaffinity (bm_pid,sizeof (cpu_set_t), &my_set)) { +perror ("Unable to taskset benchmark" ); + +return -1 ; + } + +printf ("Taskset benchmark: done!\n" ); + +return 0 ; +} + +/* +* Run a specified benchmark or fill_buf (default benchmark). Direct +* benchmark stdio to /dev/null +*/ +void run_benchmark (int signum,siginfo_t *info,void *ucontext) +{ +char **benchmark_cmd;
tools/testing/selftests/resctrl/resctrlfs.c line 143
Quoted 10 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +10
-0+int span, operation, ret; + + benchmark_cmd = info->si_ptr; + +/* +* Direct stdio of child to /dev/null, so that only parent writes to +* stdio (console) +*/ +if (!freopen ("/dev/null" ,"w" , stdout)) +PARENT_EXIT ("Unable to direct BM op to /dev/null" );
Do you need fclose for this before returning from this function?
Quoted 149 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +19
-0+ +if (strcmp (benchmark_cmd[0 ],"fill_buf" ) ==0 ) { +/* Execute default fill_buf benchmark */ + span =atoi (benchmark_cmd[1 ]); + operation =atoi (benchmark_cmd[4 ]); +if (run_fill_buf (span,1 ,1 , operation)) +fprintf (stderr,"Error in running fill buffer\n" ); + }else { +/* Execute specified benchmark */ + ret =execvp (benchmark_cmd[0 ], benchmark_cmd); +if (ret) +perror ("wrong\n" ); + } + +PARENT_EXIT ("Unable to run specified benchmark" ); +} + +/* +* create_con_mon_grp: Create a con_mon group *only* if one doesn't exist
+ * @ctrlgrp: Name of thecon_mongroup
+ * @controlgroup: Path at which it should be created
+ *
+ * Return: 0 on success, non-zero on failure
+ */
+static intcreate_con_mon_grp(const char *ctrlgrp, const char *controlgroup)tools/testing/selftests/resctrl/resctrlfs.c new file +8
-0+{ +int found_ctrl_grp =0 ; +struct dirent *ep; +DIR *dp; + +/* +* At this point, we are guaranteed to have resctrl FS mounted and if +* ctrlgrp == NULL, it means, user wants to use root con_mon grp, so do
tools/testing/selftests/resctrl/resctrlfs.c new file +35
-0+* nothing +*/ +if (!ctrlgrp) +return 0 ; + +/* Check if requested con_mon grp exists or not */ + dp =opendir (RESCTRL_PATH ); +if (dp) { +while ((ep =readdir (dp)) !=NULL ) { +if (strcmp (ep->d_name, ctrlgrp) ==0 ) + found_ctrl_grp =1 ; + } +closedir (dp); + }else { +perror ("Unable to open resctrlfs for con_mon grp" ); + +return errno; + } + +/* Requested con_mon grp doesn't exist, hence create it */ +if (found_ctrl_grp ==0 ) { +if (mkdir (controlgroup,0 ) ==-1 ) { +perror ("Unable to create con_mon group" ); + +return errno; + } + } + +return 0 ; +} + +/* +* create_mon_grp: Create a monitor group *only* if one doesn't exist +* @mongrp: Name of the monitor group +* @controlgroup: Path of con_mon grp at which the mon grp will be created
+ *
+ * Return: 0 on success, non-zero on failure
+ */tools/testing/selftests/resctrl/resctrlfs.c new file +24
-0+static int create_mon_grp (const char *mongrp,const char *controlgroup) +{ +char monitorgroup[1024 ]; +int found_mon_grp =0 ; +struct dirent *ep; +DIR *dp; + +/* Check if requested mon grp exists or not */ +sprintf (monitorgroup,"%s/mon_groups" , controlgroup); + dp =opendir (monitorgroup); +if (dp) { +while ((ep =readdir (dp)) !=NULL ) { +if (strcmp (ep->d_name, mongrp) ==0 ) + found_mon_grp =1 ; + } +closedir (dp); + }else { +perror ("Unable to open resctrl FS for mon group" ); + +return -1 ; + } + +/* Requested mon grp doesn't exist, hence create it */ + sprintf(monitorgroup, "%s/mon_groups/%s", controlgroup,mongrp);
tools/testing/selftests/resctrl/resctrlfs.c new file +15
-0+if (found_mon_grp ==0 ) { +if (mkdir (monitorgroup,0 ) ==-1 ) { +perror ("Unable to create mon group" ); + +return -1 ; + } + } + +return 0 ; +} + +/* +* write_bm_pid_to_resctrl: Write a PID (i.e. benchmark) to resctrl FS +* @bm_pid: PID that should be written +* @ctrlgrp: Name of the control monitor group (
con_mongrp)
+ * @mongrp: Name of the monitor group (mon grp)
+ * @resctrl_val: Resctrl feature (Eg: mbm, mba.. etc)
+ *
+ * If acon_mongrp is requested, create it and write pid to it, otherwise
+ * write pid to rootcon_mongrp.
+ * If a mon grp is requested, create it and write pid to it, otherwise
+ * pid is not written, this means that pid is incon_mongrp and hence
+ * should consultcon_mongrp'smon_datadirectory for results.
+ *
+ * Return: 0 on success, non-zero on failure
+ */tools/testing/selftests/resctrl/resctrlfs.c new file +22
-0+int write_bm_pid_to_resctrl (pid_t bm_pid,char *ctrlgrp,char *mongrp, +char *resctrl_val) +{ +char controlgroup[1024 ], monitorgroup[1024 ]; +FILE *fp; +int ret; + +if (ctrlgrp) +sprintf (controlgroup,"%s/%s" ,RESCTRL_PATH , ctrlgrp); +else +sprintf (controlgroup,"%s" ,RESCTRL_PATH ); + + ret =create_con_mon_grp (ctrlgrp, controlgroup); +if (ret) +return ret; + +/* Create mon grp, only for monitoring features like "mbm" */ +if ((strcmp (resctrl_val,"mbm" ) ==0 )) { +if (mongrp) { + ret =create_mon_grp (mongrp, controlgroup); +if (ret) +return ret;
tools/testing/selftests/resctrl/resctrlfs.c line 296
Quoted 10 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +10
-0+ +sprintf (monitorgroup,"%s/mon_groups/%s/tasks" , + controlgroup, mongrp); + } + } + +strcat (controlgroup,"/tasks" ); + +/* Write child pid to con_mon grp */ + fp =fopen (controlgroup,"w" );
I don't see corresponding fclose.
tools/testing/selftests/resctrl/resctrlfs.c line 308
Quoted 12 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +12
-0+if (!fp ||fprintf (fp,"%d\n" , bm_pid) <=0 ||fclose (fp) ==EOF ) { +perror ("Failed to write child to con_mon grp" ); + +return errno; + } + +/* Write child pid to mon grp, only for "mbm" */ +if ((strcmp (resctrl_val,"mbm" ) ==0 )) { +if (mongrp) { + fp =fopen (monitorgroup,"w" ); +if (!fp ||fprintf (fp,"%d\n" , bm_pid) <=0 || +fclose (fp) ==EOF ) {
I feel too many checks at one place. If fprintf fails, will it fclose the file? I suggest to separate these checks.
Quoted 49 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +25
-0+perror ("Failed to write child to mon grp" ); + +return errno; + } + } + } + +printf ("Write benchmark to resctrl FS: done!\n" ); + +return 0 ; +} + +/* +* write_schemata: Update schemata of a con_mon grp +* @ctrlgrp: Name of the con_mon grp +* @schemata: Schemata that should be updated to +* @cpu_no: CPU number that the benchmark PID is binded to +* @resctrl_val: Resctrl feature (Eg: mbm, mba.. etc) +* +* Update schemata of a con_mon grp *only* if requested resctrl feature is +* allocation type +* +* Return: 0 on success, non-zero on failure +*/ +int write_schemata(char *ctrlgrp, char *schemata, int cpu_no, char
*resctrl_val)tools/testing/selftests/resctrl/resctrlfs.c new file +16
-0+{ +char sock_num, controlgroup[1024 ], schema[1024 ]; +FILE *fp; + +if (strcmp (resctrl_val,"mba" ) ==0 ) { +if (!schemata) { +printf ("Schemata empty, so not updating\n" ); + +return 0 ; + } + sock_num =get_sock_num (cpu_no); +if (sock_num <0 ) +return -1 ; + +if (ctrlgrp) + sprintf(controlgroup, "%s/%s/schemata",
RESCTRL_PATH,tools/testing/selftests/resctrl/resctrlfs.c new file +3
-0+ ctrlgrp); + else + sprintf(controlgroup, "%s/schemata",
RESCTRL_PATH);tools/testing/selftests/resctrl/resctrlfs.c new file +1
-0+ sprintf(schema, "%s%c%c%s", "MB:", sock_num, '=',schemata);
tools/testing/selftests/resctrl/resctrlfs.c line 357
Quoted 4 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +4
-0+ + fp =fopen (controlgroup,"w" ); +if (!fp ||fprintf (fp,"%s\n" , schema) <=0 || +fclose (fp) ==EOF ) {
Same comment as above.. If fprintf fails, will it fclose the file? I suggest to separate these checks.
Quoted 110 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +108
-1+perror ("Unable to write schemata to con_mon grp" ); + +return errno; + } +printf ("Write schemata to resctrl FS: done!\n" ); + } + +return 0 ; +} + +/* +* Check if the requested feature is a valid resctrl feature or not. +* If yes, check if it's supported by this platform or not. +* +* Return: 0 on success, non-zero on failure +*/ +int validate_resctrl_feature_request (char *resctrl_val) +{ +const char *resctrl_features_list[MAX_RESCTRL_FEATURES ] = { +"mbm" ,"mba" }; +int resctrl_features_supported[MAX_RESCTRL_FEATURES ] = {0 ,0 }; +int i, valid_resctrl_feature =-1 ; +char line[1024 ]; +FILE *fp; + +if (!resctrl_val) { +fprintf (stderr,"resctrl feature cannot be NULL\n" ); + +return -1 ; + } + +/* Is the resctrl feature request valid? */ +for (i =0 ; i <MAX_RESCTRL_FEATURES ; i++) { +if (strcmp (resctrl_features_list[i], resctrl_val) ==0 ) + valid_resctrl_feature = i; + } +if (valid_resctrl_feature ==-1 ) { +fprintf (stderr,"Not a valid resctrl feature request\n" ); + +return -1 ; + } + +/* Enumerate resctrl features supported by this platform */ +if (system ("dmesg > dmesg" ) !=0 ) { +perror ("Could not create custom dmesg file" ); + +return errno; + } + + fp =fopen ("dmesg" ,"r" ); +if (!fp) { +perror ("Could not read custom created dmesg" ); + +return errno; + } + +while (fgets (line,1024 , fp)) { +if ((strstr (line,RESCTRL_MBM )) !=NULL ) + resctrl_features_supported[0 ] =1 ; +if ((strstr (line,RESCTRL_MBA )) !=NULL ) + resctrl_features_supported[1 ] =1 ; + } +if (fclose (fp) ==EOF ) { +perror ("Error in closing file" ); + +return errno; + } + +if (system ("rm -rf dmesg" ) !=0 ) +perror ("Unable to remove 'dmesg' file" ); + +/* Is the resctrl feature request supported? */ +if (!resctrl_features_supported[valid_resctrl_feature]) { +fprintf (stderr,"resctrl feature not supported!" ); + +return -1 ; + } + +return 0 ; +} + +int validate_bw_report_request (char *bw_report) +{ +if (strcmp (bw_report,"reads" ) ==0 ) +return 0 ; +if (strcmp (bw_report,"writes" ) ==0 ) +return 0 ; +if (strcmp (bw_report,"nt-writes" ) ==0 ) { +strcpy (bw_report,"writes" ); +return 0 ; + } +if (strcmp (bw_report,"total" ) ==0 ) +return 0 ; + +fprintf (stderr,"Requested iMC B/W report type unavailable\n" ); + +return -1 ; +} + +int perf_event_open (struct perf_event_attr *hw_event,pid_t pid,int cpu, +int group_fd,unsigned long flags) +{ +int ret; + + ret =syscall (__NR_perf_event_open, hw_event, pid, cpu, + group_fd, flags); +return ret; +} --2.5.0
A message that is not in the archive (sent off-list or not yet received): CALBSrqDRKbth2NAUFM+emBHVv7eZPX=O9Ki-=vUxi-QQc1wVnQ@mail.gmail.com
Re: Fwd: [PATCH v2 2/8] selftests/resctrl: Add basic resctrl file system operations and data
Quoted 7 lines
From: Moger, Babu <[email protected]>
Quoted 6 lines
From: Fenghua Yu <[email protected]>
From: Sai Praneeth Prakhya <[email protected]>The basic resctrl file system operations and data are added for future usage by resctrl selftest tool.
Quoted 17 lines
tools/testing/selftests/resctrl/resctrlfs.c line 92
Quoted 11 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +11
-0+return 0 ; +} + +char get_sock_num (int cpu_no) +{ +char sock_num, phys_pkg_path[1024 ]; +FILE *fp; + +sprintf (phys_pkg_path,"%s%d/topology/physical_package_id" , +PHYS_ID_PATH , cpu_no); + fp =fopen (phys_pkg_path,"r" );There should corresponding fclose for this. In general, I would check all the fopens in this series. I found few of the files not closed while returning. More comments below.
Quoted 1 line
+ if (!fp ||
fscanf(fp, "%c", &sock_num)<= 0 || fclose(fp) == EOF) {
fclose is here.
Quoted 10 lines
tools/testing/selftests/resctrl/resctrlfs.c line 143
Quoted 8 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +8
-0+perror("Could not get socket number"); + +return -1; +} + +*/ +if (!freopen ("/dev/null" ,"w" , stdout)) +PARENT_EXIT ("Unable to direct BM op to /dev/null" );Do you need fclose for this before returning from this function?
This fclose is missing. I will add it.
Quoted 6 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ /* Write child pid to con_mon grp */ + fp = fopen(controlgroup, "w");I don't see corresponding fclose.
Quoted 1 line
+ if (!fp ||
fprintf(fp, "%d\n", bm_pid)<= 0 || fclose(fp) == EOF) {
fclose is here:)
Quoted 7 lines
Quoted 7 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +7
-0+perror ("Failed to write child to con_mon grp" ); + +return errno; + } + +/* Write child pid to mon grp, only for "mbm" */ +if ((strcmp (resctrl_val,"mbm" ) ==0 )) {
Quoted 8 lines
tools/testing/selftests/resctrl/resctrlfs.c line 308
Quoted 4 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +4
-0+if (mongrp) { + fp =fopen (monitorgroup,"w" ); +if (!fp ||fprintf (fp,"%d\n" , bm_pid) <=0 || +fclose (fp) ==EOF ) {I feel too many checks at one place. If fprintf fails, will it fclose the file? I suggest to separate these checks.
You are right. I will separate the checks in multiple lines.
Quoted 8 lines
tools/testing/selftests/resctrl/resctrlfs.c line 357
Quoted 5 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +4
-0+ + fp =fopen (controlgroup,"w" ); +if (!fp ||fprintf (fp,"%s\n" , schema) <=0 || +fclose (fp) ==EOF ) {Same comment as above.. If fprintf fails, will it fclose the file? I suggest to separate these checks.
Sure.
I will change code based on your comments.
Thanks.
-Fenghua
Moger, Babu
reviewerRE: Fwd: [PATCH v2 2/8] selftests/resctrl: Add basic resctrl file system operations and data
Fenghua,
Quoted 39 lines
-----Original Message-----
From: Fenghua Yu <[email protected]>
Sent: Tuesday, October 30, 2018 1:36 PM
To: Moger, Babu <[email protected]>; Fenghua Yu <[email protected]>
Cc: Thomas Gleixner <[email protected]>; Ingo Molnar <[email protected]>; H Peter Anvin <[email protected]>; Tony Luck <[email protected]>; Peter Zijlstra <[email protected]>; Reinette Chatre <[email protected]>; James Morse <[email protected]>; Ravi V Shankar <[email protected]>; Sai Praneeth Prakhya <[email protected]>; Arshiya Hayatkhan Pathan <[email protected]>; linux-kernel <linux- [email protected]>
Subject: Re: Fwd: [PATCH v2 2/8] selftests/resctrl: Add basic resctrl file system operations and dataQuoted 23 lines
From: Moger, Babu <[email protected]>
Quoted 7 lines
From: Fenghua Yu <[email protected]>
From: Sai Praneeth Prakhya <[email protected]>The basic resctrl file system operations and data are added for future usage by resctrl selftest tool.
tools/testing/selftests/resctrl/resctrlfs.c new file +1
-0+return 0 ;tools/testing/selftests/resctrl/resctrlfs.c line 92
Quoted 10 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +10
-0+} + +char get_sock_num (int cpu_no) +{ +char sock_num, phys_pkg_path[1024 ]; +FILE *fp; + +sprintf (phys_pkg_path,"%s%d/topology/physical_package_id" , +PHYS_ID_PATH , cpu_no); + fp =fopen (phys_pkg_path,"r" );There should corresponding fclose for this. In general, I would check all the fopens in this series. I found few of the files not closed while returning. More comments below.
Quoted 3 lines
Quoted 1 line
Quoted 1 line
+ if (!fp ||
fscanf(fp, "%c", &sock_num)<= 0 || fclose(fp) == EOF) {fclose is here.
Yes. It is there. Let's take a case(hypothetical) where fp is valid and fscanf returns -1.
If( false || true || fclose(fp))
Will this execute fclose? Or am I missing something here?
Quoted 57 lines
Quoted 11 lines
tools/testing/selftests/resctrl/resctrlfs.c line 143
Quoted 9 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +8
-0+perror("Could not get socket number"); + +return -1; +} + +*/ +if (!freopen ("/dev/null" ,"w" , stdout)) +PARENT_EXIT ("Unable to direct BM op to /dev/null" );Do you need fclose for this before returning from this function?
This fclose is missing. I will add it.
Quoted 6 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ /* Write child pid to con_mon grp */ + fp = fopen(controlgroup, "w");I don't see corresponding fclose.
Quoted 1 line
+ if (!fp ||
fprintf(fp, "%d\n", bm_pid)<= 0 || fclose(fp) == EOF) {fclose is here:)
Quoted 7 lines
Quoted 7 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +7
-0+perror ("Failed to write child to con_mon grp" ); + +return errno; + } + +/* Write child pid to mon grp, only for "mbm" */ +if ((strcmp (resctrl_val,"mbm" ) ==0 )) {Quoted 8 lines
tools/testing/selftests/resctrl/resctrlfs.c line 308
Quoted 4 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +4
-0+if (mongrp) { + fp =fopen (monitorgroup,"w" ); +if (!fp ||fprintf (fp,"%d\n" , bm_pid) <=0 || +fclose (fp) ==EOF ) {I feel too many checks at one place. If fprintf fails, will it fclose the file? I suggest to separate these checks.
You are right. I will separate the checks in multiple lines.
Quoted 8 lines
tools/testing/selftests/resctrl/resctrlfs.c line 357
Quoted 5 lines
tools/testing/selftests/resctrl/resctrlfs.c new file +4
-0+ + fp =fopen (controlgroup,"w" ); +if (!fp ||fprintf (fp,"%s\n" , schema) <=0 || +fclose (fp) ==EOF ) {Same comment as above.. If fprintf fails, will it fclose the file? I suggest to separate these checks.
Sure.
I will change code based on your comments.
Thanks.
-Fenghua
PATCH v2 3/8 selftests/resctrl: Read memory bandwidth from perf IMC counter and from resctrl file system
In reply to Fenghua YuFrom: Sai Praneeth Prakhya <[email protected]>
Total memory bandwidth can be monitored from perf IMC counter and from resctrl file system. Later the two will be compared to verify the total memory bandwidth read from resctrl is correct.
--- tools/testing/selftests/resctrl/membw.c | 403 ++++++++++++++++++++++++++++++++ 1 file changed, 403 insertions(+) create mode 100644 tools/testing/selftests/resctrl/membw.c
tools/testing/selftests/resctrl/membw.c new file +403 -0
@@ -0,0 +1,403 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Memory bandwidth monitoring and allocation library +* +* Copyright (C) 2018 Intel Corporation +* +* Authors: +* Arshiya Hayatkhan Pathan <[email protected]> +* Sai Praneeth Prakhya <[email protected]>, +* Fenghua Yu <[email protected]> +*/ +#include "resctrl.h" + +#define UNCORE_IMC "uncore_imc" +#define READ_FILE_NAME "events/cas_count_read" +#define WRITE_FILE_NAME "events/cas_count_write" +#define DYN_PMU_PATH "/sys/bus/event_source/devices" +#define SCALE 0.00006103515625 +#define MAX_IMCS 20 +#define MAX_TOKENS 5 +#define READ 0 +#define WRITE 1 +#define CON_MON_MBM_LOCAL_BYTES_PATH \ + "%s/%s/mon_groups/%s/mon_data/mon_L3_0%c/mbm_local_bytes" + +#define CON_MBM_LOCAL_BYTES_PATH \ + "%s/%s/mon_data/mon_L3_0%c/mbm_local_bytes" + +#define MON_MBM_LOCAL_BYTES_PATH \ + "%s/mon_groups/%s/mon_data/mon_L3_0%c/mbm_local_bytes" + +#define MBM_LOCAL_BYTES_PATH \ + "%s/mon_data/mon_L3_0%c/mbm_local_bytes" + +struct membw_read_format { +__u64 value;/* The value of the event */ +__u64 time_enabled;/* if PERF_FORMAT_TOTAL_TIME_ENABLED */ +__u64 time_running;/* if PERF_FORMAT_TOTAL_TIME_RUNNING */ +__u64 id;/* if PERF_FORMAT_ID */ +}; + +struct imc_counter_config { +__u32 type; +__u64 event; +__u64 umask; +struct perf_event_attr pe; +struct membw_read_format return_value; +int fd; +}; + +static struct imc_counter_config imc_counters_config[MAX_IMCS ][2 ]; +static char mbm_total_path[1024 ]; +static int imcs; + +void membw_initialize_perf_event_attr (int i,int j) +{ +memset (&imc_counters_config[i][j].pe,0 , +sizeof (struct perf_event_attr )); + imc_counters_config[i][j].pe.type = imc_counters_config[i][j].type; + imc_counters_config[i][j].pe.size =sizeof (struct perf_event_attr ); + imc_counters_config[i][j].pe.disabled =1 ; + imc_counters_config[i][j].pe.inherit =1 ; + imc_counters_config[i][j].pe.exclude_guest =1 ; + imc_counters_config[i][j].pe.config = + imc_counters_config[i][j].umask <<8 | + imc_counters_config[i][j].event; + imc_counters_config[i][j].pe.sample_type =PERF_SAMPLE_IDENTIFIER ; + imc_counters_config[i][j].pe.read_format = +PERF_FORMAT_TOTAL_TIME_ENABLED |PERF_FORMAT_TOTAL_TIME_RUNNING ; +} + +static int open_perf_event (int i,int cpu_no,int j) +{ + imc_counters_config[i][j].fd = +perf_event_open (&imc_counters_config[i][j].pe,-1 , cpu_no,-1 , +PERF_FLAG_FD_CLOEXEC ); + +if (imc_counters_config[i][j].fd ==-1 ) { +fprintf (stderr,"Error opening leader %llx\n" , + imc_counters_config[i][j].pe.config); + +return -1 ; + } + +return 0 ; +} + +void membw_ioctl_perf_event_ioc_reset_enable (int i,int j) +{ +ioctl (imc_counters_config[i][j].fd,PERF_EVENT_IOC_RESET ,0 ); +ioctl (imc_counters_config[i][j].fd,PERF_EVENT_IOC_ENABLE ,0 ); +} + +void membw_ioctl_perf_event_ioc_disable (int i,int j) +{ +ioctl (imc_counters_config[i][j].fd,PERF_EVENT_IOC_DISABLE ,0 ); +} + +/* +* get_event_and_umask: Parse config into event and umask +* @cas_count_cfg: Config +* @count: iMC number +* @op: Operation (read/write) +*/ +void get_event_and_umask (char *cas_count_cfg,int count,bool op) +{ +char *token[MAX_TOKENS ]; +int i =0 ; + +strcat (cas_count_cfg,"," ); + token[0 ] =strtok (cas_count_cfg,"=," ); + +for (i =1 ; i <MAX_TOKENS ; i++) + token[i] =strtok (NULL ,"=," ); + +for (i =0 ; i <MAX_TOKENS ; i++) { +if (!token[i]) +break ; +if (strcmp (token[i],"event" ) ==0 ) { +if (op ==READ ) + imc_counters_config[count][READ ].event = +strtol (token[i +1 ],NULL ,16 ); +else + imc_counters_config[count][WRITE ].event = +strtol (token[i +1 ],NULL ,16 ); + } +if (strcmp (token[i],"umask" ) ==0 ) { +if (op ==READ ) + imc_counters_config[count][READ ].umask = +strtol (token[i +1 ],NULL ,16 ); +else + imc_counters_config[count][WRITE ].umask = +strtol (token[i +1 ],NULL ,16 ); + } + } +} + +/* Get type and config (read and write) of an iMC counter */ +static int read_from_imc_dir (char *imc_dir,int count) +{ +char cas_count_cfg[1024 ], imc_counter_cfg[1024 ], imc_counter_type[1024 ]; +FILE *fp; + +/* Get type of iMC counter */ +sprintf (imc_counter_type,"%s%s" , imc_dir,"type" ); + fp =fopen (imc_counter_type,"r" ); +if (!fp || +fscanf (fp,"%u" , &imc_counters_config[count][READ ].type) <=0 || +fclose (fp) ==EOF ) { +perror ("Could not get imc type" ); + +return errno; + } + + imc_counters_config[count][WRITE ].type = + imc_counters_config[count][READ ].type; + +/* Get read config */ +sprintf (imc_counter_cfg,"%s%s" , imc_dir,READ_FILE_NAME ); + fp =fopen (imc_counter_cfg,"r" ); +if (!fp ||fscanf (fp,"%s" , cas_count_cfg) <=0 ||fclose (fp) ==EOF ) { +perror ("Could not get imc cas count read" ); + +return errno; + } + +get_event_and_umask (cas_count_cfg, count,READ ); + +/* Get write config */ +sprintf (imc_counter_cfg,"%s%s" , imc_dir,WRITE_FILE_NAME ); + fp =fopen (imc_counter_cfg,"r" ); +if (!fp ||fscanf (fp,"%s" , cas_count_cfg) <=0 ||fclose (fp) ==EOF ) { +perror ("Could not get imc cas count write" ); + +return errno; + } + +get_event_and_umask (cas_count_cfg, count,WRITE ); + +return 0 ; +} + +/* +* A system can have 'n' number of iMC (Integrated Memory Controller) +* counters, get that 'n'. For each iMC counter get it's type and config. +* Also, each counter has two configs, one for read and the other for write. +* A config again has two parts, event and umask. +* Enumerate all these details into an array of structures. +* +* Return: >= 0 on success. < 0 on failure. +*/ +static int num_of_imcs (void ) +{ +unsigned int count =0 ; +char imc_dir[1024 ]; +struct dirent *ep; +int ret; +DIR *dp; + + dp =opendir (DYN_PMU_PATH ); +if (dp) { +while ((ep =readdir (dp))) { +if (strstr (ep->d_name,UNCORE_IMC )) { +sprintf (imc_dir,"%s/%s/" ,DYN_PMU_PATH , + ep->d_name); + ret =read_from_imc_dir (imc_dir, count); +if (ret) +return ret; + + count++; + } + } +closedir (dp); +if (count ==0 ) { +perror ("Unable find iMC counters!\n" ); + +return -1 ; + } + }else { +perror ("Unable to open PMU directory!\n" ); + +return -1 ; + } + +return count; +} + +static int initialize_mem_bw_imc (void ) +{ +int imc, j; + + imcs =num_of_imcs (); +if (imcs <0 ) +return imcs; + +/* Initialize perf_event_attr structures for all iMC's */ +for (imc =0 ; imc < imcs; imc++) { +for (j =0 ; j <2 ; j++) +membw_initialize_perf_event_attr (imc, j); + } + +return 0 ; +} + +/* +* get_mem_bw_imc: Memory band width as reported by iMC counters +* @cpu_no: CPU number that the benchmark PID is binded to +* @bw_report: Bandwidth report type (reads, writes) +* +* Memory B/W utilized by a process on a socket can be calculated using +* iMC counters. Perf events are used to read these counters. +* +* Return: >= 0 on success. < 0 on failure. +*/ +static float get_mem_bw_imc (int cpu_no,char *bw_report) +{ +float reads, writes, of_mul_read, of_mul_write; +int imc, j, ret; + +/* Start all iMC counters to log values (both read and write) */ + reads =0 , writes =0 , of_mul_read =1 , of_mul_write =1 ; +for (imc =0 ; imc < imcs; imc++) { +for (j =0 ; j <2 ; j++) { + ret =open_perf_event (imc, cpu_no, j); +if (ret) +return -1 ; + } +for (j =0 ; j <2 ; j++) +membw_ioctl_perf_event_ioc_reset_enable (imc, j); + } + +sleep (1 ); + +/* Stop counters after a second to get results (both read and write) */ +for (imc =0 ; imc < imcs; imc++) { +for (j =0 ; j <2 ; j++) +membw_ioctl_perf_event_ioc_disable (imc, j); + } + +/* +* Get results which are stored in struct type imc_counter_config +* Take over flow into consideration before calculating total b/w +*/ +for (imc =0 ; imc < imcs; imc++) { +struct imc_counter_config *r = + &imc_counters_config[imc][READ ]; +struct imc_counter_config *w = + &imc_counters_config[imc][WRITE ]; + +if (read (r->fd, &r->return_value, +sizeof (struct membw_read_format )) ==-1 ) { +perror ("Couldn't get read b/w through iMC" ); + +return -1 ; + } + +if (read (w->fd, &w->return_value, +sizeof (struct membw_read_format )) ==-1 ) { +perror ("Couldn't get write bw through iMC" ); + +return -1 ; + } + +__u64 r_time_enabled = r->return_value.time_enabled; +__u64 r_time_running = r->return_value.time_running; + +if (r_time_enabled != r_time_running) + of_mul_read = (float )r_time_enabled / + (float )r_time_running; + +__u64 w_time_enabled = w->return_value.time_enabled; +__u64 w_time_running = w->return_value.time_running; + +if (w_time_enabled != w_time_running) + of_mul_write = (float )w_time_enabled / + (float )w_time_running; + reads += r->return_value.value * of_mul_read *SCALE ; + writes += w->return_value.value * of_mul_write *SCALE ; + } + +for (imc =0 ; imc < imcs; imc++) { +close (imc_counters_config[imc][READ ].fd); +close (imc_counters_config[imc][WRITE ].fd); + } + +if (strcmp (bw_report,"reads" ) ==0 ) +return reads; + +if (strcmp (bw_report,"writes" ) ==0 ) +return writes; + +return (reads + writes); +} + +void set_mbm_path (const char *ctrlgrp,const char *mongrp,char sock_num) +{ +if (ctrlgrp && mongrp) +sprintf (mbm_total_path,CON_MON_MBM_LOCAL_BYTES_PATH , +RESCTRL_PATH , ctrlgrp, mongrp, sock_num); +else if (!ctrlgrp && mongrp) +sprintf (mbm_total_path,MON_MBM_LOCAL_BYTES_PATH ,RESCTRL_PATH , + mongrp, sock_num); +else if (ctrlgrp && !mongrp) +sprintf (mbm_total_path,CON_MBM_LOCAL_BYTES_PATH ,RESCTRL_PATH , + ctrlgrp, sock_num); +else if (!ctrlgrp && !mongrp) +sprintf (mbm_total_path,MBM_LOCAL_BYTES_PATH ,RESCTRL_PATH , + sock_num); +} + +/* +* initialize_mem_bw_resctrl: Appropriately populate "mbm_total_path" +* @ctrlgrp: Name of the control monitor group (con_mon grp) +* @mongrp: Name of the monitor group (mon grp) +* @cpu_no: CPU number that the benchmark PID is binded to +* @resctrl_val: Resctrl feature (Eg: mbm, mba.. etc) +*/ +static void initialize_mem_bw_resctrl (const char *ctrlgrp,const char *mongrp, +int cpu_no,char *resctrl_val) +{ +char sock_num; + + sock_num =get_sock_num (cpu_no); +if (sock_num <0 ) +return ; + +if (strcmp (resctrl_val,"mbm" ) ==0 ) +set_mbm_path (ctrlgrp, mongrp, sock_num); + +if ((strcmp (resctrl_val,"mba" ) ==0 )) { +if (ctrlgrp) +sprintf (mbm_total_path,CON_MBM_LOCAL_BYTES_PATH , +RESCTRL_PATH , ctrlgrp, sock_num); +else +sprintf (mbm_total_path,MBM_LOCAL_BYTES_PATH , +RESCTRL_PATH , sock_num); + } +} + +/* +* Get MBM Local bytes as reported by resctrl FS +* For MBM, +* 1. If con_mon grp and mon grp are given, then read from con_mon grp's mon grp +* 2. If only con_mon grp is given, then read from con_mon grp +* 3. If both are not given, then read from root con_mon grp +* For MBA, +* 1. If con_mon grp is given, then read from it +* 2. If con_mon grp is not given, then read from root con_mon grp +*/ +static unsigned long get_mem_bw_resctrl (void ) +{ +unsigned long mbm_total =0 ; +FILE *fp; + + fp =fopen (mbm_total_path,"r" ); +if (!fp ||fscanf (fp,"%lu" , &mbm_total) <=0 ||fclose (fp) ==EOF ) { +perror ("Could not get mbm local bytes" ); + +return -1 ; + } + +return mbm_total; +}
Signature · 1 line
2.5.0
Moger, Babu
reviewerRE: [PATCH v2 3/8] selftests/resctrl: Read memory bandwidth from perf IMC counter and from resctrl file system
Fenghua, Sai
Quoted 189 lines
-----Original Message-----
From: Fenghua Yu <[email protected]>
Sent: Thursday, October 25, 2018 6:07 PM
To: Thomas Gleixner <[email protected]>; Ingo Molnar <[email protected]>; H Peter Anvin <[email protected]>; Tony Luck <[email protected]>; Peter Zijlstra <[email protected]>; Reinette Chatre <[email protected]>; Moger, Babu <[email protected]>; James Morse <[email protected]>; Ravi V Shankar <[email protected]>; Sai Praneeth Prakhya <[email protected]>; Arshiya Hayatkhan Pathan <[email protected]>
Cc: linux-kernel <[email protected]>; Fenghua Yu <[email protected]>
Subject: [PATCH v2 3/8] selftests/resctrl: Read memory bandwidth from perf IMC counter and from resctrl file systemFrom: Sai Praneeth Prakhya <[email protected]>
Total memory bandwidth can be monitored from perf IMC counter and from resctrl file system. Later the two will be compared to verify the total memory bandwidth read from resctrl is correct.
Signed-off-by Sai Praneeth Prakhya <[email protected]>Signed-off-by Arshiya Hayatkhan PathanSigned-off-by Fenghua Yu <[email protected]>--- tools/testing/selftests/resctrl/membw.c | 403 ++++++++++++++++++++++++++++++++ 1 file changed, 403 insertions(+) create mode 100644 tools/testing/selftests/resctrl/membw.ctools/testing/selftests/resctrl/membw.c new file +23
-0@@ -0,0 +1,403 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Memory bandwidth monitoring and allocation library +* +* Copyright (C) 2018 Intel Corporation +* +* Authors: +* Arshiya Hayatkhan Pathan <[email protected]> +* Sai Praneeth Prakhya <[email protected]>, +* Fenghua Yu <[email protected]> +*/ +#include "resctrl.h" + +#define UNCORE_IMC "uncore_imc" +#define READ_FILE_NAME "events/cas_count_read" +#define WRITE_FILE_NAME "events/cas_count_write" +#define DYN_PMU_PATH "/sys/bus/event_source/devices" +#define SCALE 0.00006103515625 +#define MAX_IMCS 20 +#define MAX_TOKENS 5 +#define READ 0 +#define WRITE 1 +#define CON_MON_MBM_LOCAL_BYTES_PATH \ + "%s/%s/mon_groups/%s/mon_data/mon_L3_0%c/mbm_local_bytes"
tools/testing/selftests/resctrl/membw.c new file +13
-0+ +#define CON_MBM_LOCAL_BYTES_PATH \ + "%s/%s/mon_data/mon_L3_0%c/mbm_local_bytes" + +#define MON_MBM_LOCAL_BYTES_PATH \ + "%s/mon_groups/%s/mon_data/mon_L3_0%c/mbm_local_bytes" + +#define MBM_LOCAL_BYTES_PATH \ + "%s/mon_data/mon_L3_0%c/mbm_local_bytes" + +struct membw_read_format { +__u64 value;/* The value of the event */ +__u64 time_enabled;/* if PERF_FORMAT_TOTAL_TIME_ENABLED */
tools/testing/selftests/resctrl/membw.c new file +1
-0+__u64 time_running;/* if PERF_FORMAT_TOTAL_TIME_RUNNING */
tools/testing/selftests/resctrl/membw.c new file +29
-0+__u64 id;/* if PERF_FORMAT_ID */ +}; + +struct imc_counter_config { +__u32 type; +__u64 event; +__u64 umask; +struct perf_event_attr pe; +struct membw_read_format return_value; +int fd; +}; + +static struct imc_counter_config imc_counters_config[MAX_IMCS ][2 ]; +static char mbm_total_path[1024 ]; +static int imcs; + +void membw_initialize_perf_event_attr (int i,int j) +{ +memset (&imc_counters_config[i][j].pe,0 , +sizeof (struct perf_event_attr )); + imc_counters_config[i][j].pe.type = imc_counters_config[i][j].type; + imc_counters_config[i][j].pe.size =sizeof (struct perf_event_attr ); + imc_counters_config[i][j].pe.disabled =1 ; + imc_counters_config[i][j].pe.inherit =1 ; + imc_counters_config[i][j].pe.exclude_guest =1 ; + imc_counters_config[i][j].pe.config = + imc_counters_config[i][j].umask <<8 | + imc_counters_config[i][j].event; + imc_counters_config[i][j].pe.sample_type =
PERF_SAMPLE_IDENTIFIER;tools/testing/selftests/resctrl/membw.c new file +2
-0+ imc_counters_config[i][j].pe.read_format = + PERF_FORMAT_TOTAL_TIME_ENABLED |
PERF_FORMAT_TOTAL_TIME_RUNNING;tools/testing/selftests/resctrl/membw.c new file +6
-0+} + +static int open_perf_event (int i,int cpu_no,int j) +{ + imc_counters_config[i][j].fd = + perf_event_open(&imc_counters_config[i][j].pe, -1,
cpu_no, -1,tools/testing/selftests/resctrl/membw.c new file +66
-0+ PERF_FLAG_FD_CLOEXEC); + +if (imc_counters_config[i][j].fd ==-1 ) { +fprintf (stderr,"Error opening leader %llx\n" , + imc_counters_config[i][j].pe.config); + +return -1 ; + } + +return 0 ; +} + +void membw_ioctl_perf_event_ioc_reset_enable (int i,int j) +{ +ioctl (imc_counters_config[i][j].fd,PERF_EVENT_IOC_RESET ,0 ); +ioctl (imc_counters_config[i][j].fd,PERF_EVENT_IOC_ENABLE ,0 ); +} + +void membw_ioctl_perf_event_ioc_disable (int i,int j) +{ +ioctl (imc_counters_config[i][j].fd,PERF_EVENT_IOC_DISABLE ,0 ); +} + +/* +* get_event_and_umask: Parse config into event and umask +* @cas_count_cfg: Config +* @count: iMC number +* @op: Operation (read/write) +*/ +void get_event_and_umask (char *cas_count_cfg,int count,bool op) +{ +char *token[MAX_TOKENS ]; +int i =0 ; + +strcat (cas_count_cfg,"," ); + token[0 ] =strtok (cas_count_cfg,"=," ); + +for (i =1 ; i <MAX_TOKENS ; i++) + token[i] =strtok (NULL ,"=," ); + +for (i =0 ; i <MAX_TOKENS ; i++) { +if (!token[i]) +break ; +if (strcmp (token[i],"event" ) ==0 ) { +if (op ==READ ) + imc_counters_config[count][READ ].event = +strtol (token[i +1 ],NULL ,16 ); +else + imc_counters_config[count][WRITE ].event = +strtol (token[i +1 ],NULL ,16 ); + } +if (strcmp (token[i],"umask" ) ==0 ) { +if (op ==READ ) + imc_counters_config[count][READ ].umask = +strtol (token[i +1 ],NULL ,16 ); +else + imc_counters_config[count][WRITE ].umask = +strtol (token[i +1 ],NULL ,16 ); + } + } +} + +/* Get type and config (read and write) of an iMC counter */ +static int read_from_imc_dir (char *imc_dir,int count) +{ + char cas_count_cfg[1024], imc_counter_cfg[1024],imc_counter_type[1024];
tools/testing/selftests/resctrl/membw.c line 149
Quoted 8 lines
tools/testing/selftests/resctrl/membw.c new file +8
-0+FILE *fp; + +/* Get type of iMC counter */ +sprintf (imc_counter_type,"%s%s" , imc_dir,"type" ); + fp =fopen (imc_counter_type,"r" ); +if (!fp || +fscanf (fp,"%u" , &imc_counters_config[count][READ ].type) <=0 || +fclose (fp) ==EOF ) {
Same comment as patch 2. If fscanf fails, will it fclose the file? I suggest to separate these checks.
tools/testing/selftests/resctrl/membw.c line 161
Quoted 12 lines
tools/testing/selftests/resctrl/membw.c new file +12
-0+perror ("Could not get imc type" ); + +return errno; + } + + imc_counters_config[count][WRITE ].type = + imc_counters_config[count][READ ].type; + +/* Get read config */ +sprintf (imc_counter_cfg,"%s%s" , imc_dir,READ_FILE_NAME ); + fp =fopen (imc_counter_cfg,"r" ); +if (!fp ||fscanf (fp,"%s" , cas_count_cfg) <=0 ||fclose (fp) ==EOF ) {
Same comment as above. If fscanf fails, will it fclose the file? I suggest to separate these checks.
tools/testing/selftests/resctrl/membw.c line 172
Quoted 11 lines
tools/testing/selftests/resctrl/membw.c new file +11
-0+perror ("Could not get imc cas count read" ); + +return errno; + } + +get_event_and_umask (cas_count_cfg, count,READ ); + +/* Get write config */ +sprintf (imc_counter_cfg,"%s%s" , imc_dir,WRITE_FILE_NAME ); + fp =fopen (imc_counter_cfg,"r" ); +if (!fp ||fscanf (fp,"%s" , cas_count_cfg) <=0 ||fclose (fp) ==EOF ) {
Same comment as above.
Quoted 228 lines
tools/testing/selftests/resctrl/membw.c new file +102
-0+perror ("Could not get imc cas count write" ); + +return errno; + } + +get_event_and_umask (cas_count_cfg, count,WRITE ); + +return 0 ; +} + +/* +* A system can have 'n' number of iMC (Integrated Memory Controller) +* counters, get that 'n'. For each iMC counter get it's type and config. +* Also, each counter has two configs, one for read and the other for write. +* A config again has two parts, event and umask. +* Enumerate all these details into an array of structures. +* +* Return: >= 0 on success. < 0 on failure. +*/ +static int num_of_imcs (void ) +{ +unsigned int count =0 ; +char imc_dir[1024 ]; +struct dirent *ep; +int ret; +DIR *dp; + + dp =opendir (DYN_PMU_PATH ); +if (dp) { +while ((ep =readdir (dp))) { +if (strstr (ep->d_name,UNCORE_IMC )) { +sprintf (imc_dir,"%s/%s/" ,DYN_PMU_PATH , + ep->d_name); + ret =read_from_imc_dir (imc_dir, count); +if (ret) +return ret; + + count++; + } + } +closedir (dp); +if (count ==0 ) { +perror ("Unable find iMC counters!\n" ); + +return -1 ; + } + }else { +perror ("Unable to open PMU directory!\n" ); + +return -1 ; + } + +return count; +} + +static int initialize_mem_bw_imc (void ) +{ +int imc, j; + + imcs =num_of_imcs (); +if (imcs <0 ) +return imcs; + +/* Initialize perf_event_attr structures for all iMC's */ +for (imc =0 ; imc < imcs; imc++) { +for (j =0 ; j <2 ; j++) +membw_initialize_perf_event_attr (imc, j); + } + +return 0 ; +} + +/* +* get_mem_bw_imc: Memory band width as reported by iMC counters +* @cpu_no: CPU number that the benchmark PID is binded to +* @bw_report: Bandwidth report type (reads, writes) +* +* Memory B/W utilized by a process on a socket can be calculated using +* iMC counters. Perf events are used to read these counters. +* +* Return: >= 0 on success. < 0 on failure. +*/ +static float get_mem_bw_imc (int cpu_no,char *bw_report) +{ +float reads, writes, of_mul_read, of_mul_write; +int imc, j, ret; + +/* Start all iMC counters to log values (both read and write) */ + reads =0 , writes =0 , of_mul_read =1 , of_mul_write =1 ; +for (imc =0 ; imc < imcs; imc++) { +for (j =0 ; j <2 ; j++) { + ret =open_perf_event (imc, cpu_no, j); +if (ret) +return -1 ; + } +for (j =0 ; j <2 ; j++) +membw_ioctl_perf_event_ioc_reset_enable (imc, j); + } + +sleep (1 ); + +/* Stop counters after a second to get results (both read and write) */
tools/testing/selftests/resctrl/membw.c new file +61
-0+for (imc =0 ; imc < imcs; imc++) { +for (j =0 ; j <2 ; j++) +membw_ioctl_perf_event_ioc_disable (imc, j); + } + +/* +* Get results which are stored in struct type imc_counter_config +* Take over flow into consideration before calculating total b/w +*/ +for (imc =0 ; imc < imcs; imc++) { +struct imc_counter_config *r = + &imc_counters_config[imc][READ ]; +struct imc_counter_config *w = + &imc_counters_config[imc][WRITE ]; + +if (read (r->fd, &r->return_value, +sizeof (struct membw_read_format )) ==-1 ) { +perror ("Couldn't get read b/w through iMC" ); + +return -1 ; + } + +if (read (w->fd, &w->return_value, +sizeof (struct membw_read_format )) ==-1 ) { +perror ("Couldn't get write bw through iMC" ); + +return -1 ; + } + +__u64 r_time_enabled = r->return_value.time_enabled; +__u64 r_time_running = r->return_value.time_running; + +if (r_time_enabled != r_time_running) + of_mul_read = (float )r_time_enabled / + (float )r_time_running; + +__u64 w_time_enabled = w->return_value.time_enabled; +__u64 w_time_running = w->return_value.time_running; + +if (w_time_enabled != w_time_running) + of_mul_write = (float )w_time_enabled / + (float )w_time_running; + reads += r->return_value.value * of_mul_read *SCALE ; + writes += w->return_value.value * of_mul_write *SCALE ; + } + +for (imc =0 ; imc < imcs; imc++) { +close (imc_counters_config[imc][READ ].fd); +close (imc_counters_config[imc][WRITE ].fd); + } + +if (strcmp (bw_report,"reads" ) ==0 ) +return reads; + +if (strcmp (bw_report,"writes" ) ==0 ) +return writes; + +return (reads + writes); +} + +void set_mbm_path(const char *ctrlgrp, const char *mongrp, char
sock_num)tools/testing/selftests/resctrl/membw.c new file +3
-0+{ +if (ctrlgrp && mongrp) + sprintf(mbm_total_path,
CON_MON_MBM_LOCAL_BYTES_PATH,tools/testing/selftests/resctrl/membw.c new file +3
-0+ RESCTRL_PATH, ctrlgrp, mongrp, sock_num); + else if (!ctrlgrp && mongrp) + sprintf(mbm_total_path, MON_MBM_LOCAL_BYTES_PATH,
RESCTRL_PATH,tools/testing/selftests/resctrl/membw.c new file +3
-0+ mongrp, sock_num); + else if (ctrlgrp && !mongrp) + sprintf(mbm_total_path, CON_MBM_LOCAL_BYTES_PATH,
RESCTRL_PATH,tools/testing/selftests/resctrl/membw.c new file +3
-0+ ctrlgrp, sock_num); + else if (!ctrlgrp && !mongrp) + sprintf(mbm_total_path, MBM_LOCAL_BYTES_PATH,
RESCTRL_PATH,tools/testing/selftests/resctrl/membw.c new file +6
-0+ sock_num); +} + +/* +* initialize_mem_bw_resctrl: Appropriately populate "mbm_total_path" +* @ctrlgrp: Name of the control monitor group (
con_mongrp)
+ * @mongrp: Name of the monitor group (mon grp)
+ * @cpu_no: CPU number that the benchmark PID is
binded to
+ * @resctrl_val: Resctrl feature (Eg: mbm, mba.. etc)
+ */
+static void initialize_mem_bw_resctrl(const char *ctrlgrp, const char *mongrp,tools/testing/selftests/resctrl/membw.c new file +14
-0+ int cpu_no, char *resctrl_val) +{ + char sock_num; + + sock_num =get_sock_num (cpu_no); +if (sock_num <0 ) +return ; + +if (strcmp (resctrl_val,"mbm" ) ==0 ) +set_mbm_path (ctrlgrp, mongrp, sock_num); + +if ((strcmp (resctrl_val,"mba" ) ==0 )) { +if (ctrlgrp) + sprintf(mbm_total_path,
CON_MBM_LOCAL_BYTES_PATH,tools/testing/selftests/resctrl/membw.c new file +11
-0+ RESCTRL_PATH, ctrlgrp, sock_num); + else +sprintf (mbm_total_path ,MBM_LOCAL_BYTES_PATH , +RESCTRL_PATH ,sock_num ); + } +} + +/* +* Get MBM Local bytes as reported by resctrl FS +* For MBM, +* 1. If con_mon grp and mon grp are given, then read from con_mon grp's mon grp
+ * 2. If onlycon_mongrp is given, then read fromcon_mongrp
+ * 3. If both are not given, then read from rootcon_mongrp
+ * For MBA,
+ * 1. Ifcon_mongrp is given, then read from it
+ * 2. Ifcon_mongrp is not given, then read from rootcon_mongrp
+ */
tools/testing/selftests/resctrl/membw.c line 396
Quoted 7 lines
tools/testing/selftests/resctrl/membw.c new file +7
-0+static unsigned long get_mem_bw_resctrl (void ) +{ +unsigned long mbm_total =0 ; +FILE *fp; + + fp =fopen (mbm_total_path,"r" ); +if (!fp ||fscanf (fp,"%lu" , &mbm_total) <=0 ||fclose (fp) ==EOF ) {
Same comment as above. If fscanf fails, will it fclose the file? I suggest to separate these checks.
Quoted 9 lines
tools/testing/selftests/resctrl/membw.c new file +7
-1+perror ("Could not get mbm local bytes" ); + +return -1 ; + } + +return mbm_total; +} --2.5.0
Moger, Babu
reviewerRE: [PATCH v2 3/8] selftests/resctrl: Read memory bandwidth from perf IMC counter and from resctrl file system
In reply to Fenghua YuFenghua/Sai,
Quoted 246 lines
-----Original Message-----
From: Fenghua Yu <[email protected]>
Sent: Thursday, October 25, 2018 6:07 PM
To: Thomas Gleixner <[email protected]>; Ingo Molnar <[email protected]>; H Peter Anvin <[email protected]>; Tony Luck <[email protected]>; Peter Zijlstra <[email protected]>; Reinette Chatre <[email protected]>; Moger, Babu <[email protected]>; James Morse <[email protected]>; Ravi V Shankar <[email protected]>; Sai Praneeth Prakhya <[email protected]>; Arshiya Hayatkhan Pathan <[email protected]>
Cc: linux-kernel <[email protected]>; Fenghua Yu <[email protected]>
Subject: [PATCH v2 3/8] selftests/resctrl: Read memory bandwidth from perf IMC counter and from resctrl file systemFrom: Sai Praneeth Prakhya <[email protected]>
Total memory bandwidth can be monitored from perf IMC counter and from resctrl file system. Later the two will be compared to verify the total memory bandwidth read from resctrl is correct.
Signed-off-by Sai Praneeth Prakhya <[email protected]>Signed-off-by Arshiya Hayatkhan PathanSigned-off-by Fenghua Yu <[email protected]>--- tools/testing/selftests/resctrl/membw.c | 403 ++++++++++++++++++++++++++++++++ 1 file changed, 403 insertions(+) create mode 100644 tools/testing/selftests/resctrl/membw.ctools/testing/selftests/resctrl/membw.c new file +23
-0@@ -0,0 +1,403 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Memory bandwidth monitoring and allocation library +* +* Copyright (C) 2018 Intel Corporation +* +* Authors: +* Arshiya Hayatkhan Pathan <[email protected]> +* Sai Praneeth Prakhya <[email protected]>, +* Fenghua Yu <[email protected]> +*/ +#include "resctrl.h" + +#define UNCORE_IMC "uncore_imc" +#define READ_FILE_NAME "events/cas_count_read" +#define WRITE_FILE_NAME "events/cas_count_write" +#define DYN_PMU_PATH "/sys/bus/event_source/devices" +#define SCALE 0.00006103515625 +#define MAX_IMCS 20 +#define MAX_TOKENS 5 +#define READ 0 +#define WRITE 1 +#define CON_MON_MBM_LOCAL_BYTES_PATH \ + "%s/%s/mon_groups/%s/mon_data/mon_L3_0%c/mbm_local_bytes"
tools/testing/selftests/resctrl/membw.c new file +13
-0+ +#define CON_MBM_LOCAL_BYTES_PATH \ + "%s/%s/mon_data/mon_L3_0%c/mbm_local_bytes" + +#define MON_MBM_LOCAL_BYTES_PATH \ + "%s/mon_groups/%s/mon_data/mon_L3_0%c/mbm_local_bytes" + +#define MBM_LOCAL_BYTES_PATH \ + "%s/mon_data/mon_L3_0%c/mbm_local_bytes" + +struct membw_read_format { +__u64 value;/* The value of the event */ +__u64 time_enabled;/* if PERF_FORMAT_TOTAL_TIME_ENABLED */
tools/testing/selftests/resctrl/membw.c new file +1
-0+__u64 time_running;/* if PERF_FORMAT_TOTAL_TIME_RUNNING */
tools/testing/selftests/resctrl/membw.c new file +29
-0+__u64 id;/* if PERF_FORMAT_ID */ +}; + +struct imc_counter_config { +__u32 type; +__u64 event; +__u64 umask; +struct perf_event_attr pe; +struct membw_read_format return_value; +int fd; +}; + +static struct imc_counter_config imc_counters_config[MAX_IMCS ][2 ]; +static char mbm_total_path[1024 ]; +static int imcs; + +void membw_initialize_perf_event_attr (int i,int j) +{ +memset (&imc_counters_config[i][j].pe,0 , +sizeof (struct perf_event_attr )); + imc_counters_config[i][j].pe.type = imc_counters_config[i][j].type; + imc_counters_config[i][j].pe.size =sizeof (struct perf_event_attr ); + imc_counters_config[i][j].pe.disabled =1 ; + imc_counters_config[i][j].pe.inherit =1 ; + imc_counters_config[i][j].pe.exclude_guest =1 ; + imc_counters_config[i][j].pe.config = + imc_counters_config[i][j].umask <<8 | + imc_counters_config[i][j].event; + imc_counters_config[i][j].pe.sample_type =
PERF_SAMPLE_IDENTIFIER;tools/testing/selftests/resctrl/membw.c new file +2
-0+ imc_counters_config[i][j].pe.read_format = + PERF_FORMAT_TOTAL_TIME_ENABLED |
PERF_FORMAT_TOTAL_TIME_RUNNING;tools/testing/selftests/resctrl/membw.c new file +6
-0+} + +static int open_perf_event (int i,int cpu_no,int j) +{ + imc_counters_config[i][j].fd = + perf_event_open(&imc_counters_config[i][j].pe, -1,
cpu_no, -1,tools/testing/selftests/resctrl/membw.c new file +66
-0+ PERF_FLAG_FD_CLOEXEC); + +if (imc_counters_config[i][j].fd ==-1 ) { +fprintf (stderr,"Error opening leader %llx\n" , + imc_counters_config[i][j].pe.config); + +return -1 ; + } + +return 0 ; +} + +void membw_ioctl_perf_event_ioc_reset_enable (int i,int j) +{ +ioctl (imc_counters_config[i][j].fd,PERF_EVENT_IOC_RESET ,0 ); +ioctl (imc_counters_config[i][j].fd,PERF_EVENT_IOC_ENABLE ,0 ); +} + +void membw_ioctl_perf_event_ioc_disable (int i,int j) +{ +ioctl (imc_counters_config[i][j].fd,PERF_EVENT_IOC_DISABLE ,0 ); +} + +/* +* get_event_and_umask: Parse config into event and umask +* @cas_count_cfg: Config +* @count: iMC number +* @op: Operation (read/write) +*/ +void get_event_and_umask (char *cas_count_cfg,int count,bool op) +{ +char *token[MAX_TOKENS ]; +int i =0 ; + +strcat (cas_count_cfg,"," ); + token[0 ] =strtok (cas_count_cfg,"=," ); + +for (i =1 ; i <MAX_TOKENS ; i++) + token[i] =strtok (NULL ,"=," ); + +for (i =0 ; i <MAX_TOKENS ; i++) { +if (!token[i]) +break ; +if (strcmp (token[i],"event" ) ==0 ) { +if (op ==READ ) + imc_counters_config[count][READ ].event = +strtol (token[i +1 ],NULL ,16 ); +else + imc_counters_config[count][WRITE ].event = +strtol (token[i +1 ],NULL ,16 ); + } +if (strcmp (token[i],"umask" ) ==0 ) { +if (op ==READ ) + imc_counters_config[count][READ ].umask = +strtol (token[i +1 ],NULL ,16 ); +else + imc_counters_config[count][WRITE ].umask = +strtol (token[i +1 ],NULL ,16 ); + } + } +} + +/* Get type and config (read and write) of an iMC counter */ +static int read_from_imc_dir (char *imc_dir,int count) +{ + char cas_count_cfg[1024], imc_counter_cfg[1024],imc_counter_type[1024];
tools/testing/selftests/resctrl/membw.c new file +57
-0+FILE *fp; + +/* Get type of iMC counter */ +sprintf (imc_counter_type,"%s%s" , imc_dir,"type" ); + fp =fopen (imc_counter_type,"r" ); +if (!fp || +fscanf (fp,"%u" , &imc_counters_config[count][READ ].type) <=0 || +fclose (fp) ==EOF ) { +perror ("Could not get imc type" ); + +return errno; + } + + imc_counters_config[count][WRITE ].type = + imc_counters_config[count][READ ].type; + +/* Get read config */ +sprintf (imc_counter_cfg,"%s%s" , imc_dir,READ_FILE_NAME ); + fp =fopen (imc_counter_cfg,"r" ); +if (!fp ||fscanf (fp,"%s" , cas_count_cfg) <=0 ||fclose (fp) ==EOF ) { +perror ("Could not get imc cas count read" ); + +return errno; + } + +get_event_and_umask (cas_count_cfg, count,READ ); + +/* Get write config */ +sprintf (imc_counter_cfg,"%s%s" , imc_dir,WRITE_FILE_NAME ); + fp =fopen (imc_counter_cfg,"r" ); +if (!fp ||fscanf (fp,"%s" , cas_count_cfg) <=0 ||fclose (fp) ==EOF ) { +perror ("Could not get imc cas count write" ); + +return errno; + } + +get_event_and_umask (cas_count_cfg, count,WRITE ); + +return 0 ; +} + +/* +* A system can have 'n' number of iMC (Integrated Memory Controller) +* counters, get that 'n'. For each iMC counter get it's type and config. +* Also, each counter has two configs, one for read and the other for write. +* A config again has two parts, event and umask. +* Enumerate all these details into an array of structures. +* +* Return: >= 0 on success. < 0 on failure. +*/ +static int num_of_imcs (void ) +{ +unsigned int count =0 ; +char imc_dir[1024 ]; +struct dirent *ep; +int ret; +DIR *dp;
tools/testing/selftests/resctrl/membw.c line 208
Quoted 10 lines
tools/testing/selftests/resctrl/membw.c new file +10
-0+ + dp =opendir (DYN_PMU_PATH ); +if (dp) { +while ((ep =readdir (dp))) { +if (strstr (ep->d_name,UNCORE_IMC )) { +sprintf (imc_dir,"%s/%s/" ,DYN_PMU_PATH , + ep->d_name); + ret =read_from_imc_dir (imc_dir, count); +if (ret) +return ret;
Missed this earlier. If read_from_imc_dir fails, then this could return without doing "closedir"
Quoted 208 lines
tools/testing/selftests/resctrl/membw.c new file +66
-0+ + count++; + } + } +closedir (dp); +if (count ==0 ) { +perror ("Unable find iMC counters!\n" ); + +return -1 ; + } + }else { +perror ("Unable to open PMU directory!\n" ); + +return -1 ; + } + +return count; +} + +static int initialize_mem_bw_imc (void ) +{ +int imc, j; + + imcs =num_of_imcs (); +if (imcs <0 ) +return imcs; + +/* Initialize perf_event_attr structures for all iMC's */ +for (imc =0 ; imc < imcs; imc++) { +for (j =0 ; j <2 ; j++) +membw_initialize_perf_event_attr (imc, j); + } + +return 0 ; +} + +/* +* get_mem_bw_imc: Memory band width as reported by iMC counters +* @cpu_no: CPU number that the benchmark PID is binded to +* @bw_report: Bandwidth report type (reads, writes) +* +* Memory B/W utilized by a process on a socket can be calculated using +* iMC counters. Perf events are used to read these counters. +* +* Return: >= 0 on success. < 0 on failure. +*/ +static float get_mem_bw_imc (int cpu_no,char *bw_report) +{ +float reads, writes, of_mul_read, of_mul_write; +int imc, j, ret; + +/* Start all iMC counters to log values (both read and write) */ + reads =0 , writes =0 , of_mul_read =1 , of_mul_write =1 ; +for (imc =0 ; imc < imcs; imc++) { +for (j =0 ; j <2 ; j++) { + ret =open_perf_event (imc, cpu_no, j); +if (ret) +return -1 ; + } +for (j =0 ; j <2 ; j++) +membw_ioctl_perf_event_ioc_reset_enable (imc, j); + } + +sleep (1 ); + +/* Stop counters after a second to get results (both read and write) */
tools/testing/selftests/resctrl/membw.c new file +61
-0+for (imc =0 ; imc < imcs; imc++) { +for (j =0 ; j <2 ; j++) +membw_ioctl_perf_event_ioc_disable (imc, j); + } + +/* +* Get results which are stored in struct type imc_counter_config +* Take over flow into consideration before calculating total b/w +*/ +for (imc =0 ; imc < imcs; imc++) { +struct imc_counter_config *r = + &imc_counters_config[imc][READ ]; +struct imc_counter_config *w = + &imc_counters_config[imc][WRITE ]; + +if (read (r->fd, &r->return_value, +sizeof (struct membw_read_format )) ==-1 ) { +perror ("Couldn't get read b/w through iMC" ); + +return -1 ; + } + +if (read (w->fd, &w->return_value, +sizeof (struct membw_read_format )) ==-1 ) { +perror ("Couldn't get write bw through iMC" ); + +return -1 ; + } + +__u64 r_time_enabled = r->return_value.time_enabled; +__u64 r_time_running = r->return_value.time_running; + +if (r_time_enabled != r_time_running) + of_mul_read = (float )r_time_enabled / + (float )r_time_running; + +__u64 w_time_enabled = w->return_value.time_enabled; +__u64 w_time_running = w->return_value.time_running; + +if (w_time_enabled != w_time_running) + of_mul_write = (float )w_time_enabled / + (float )w_time_running; + reads += r->return_value.value * of_mul_read *SCALE ; + writes += w->return_value.value * of_mul_write *SCALE ; + } + +for (imc =0 ; imc < imcs; imc++) { +close (imc_counters_config[imc][READ ].fd); +close (imc_counters_config[imc][WRITE ].fd); + } + +if (strcmp (bw_report,"reads" ) ==0 ) +return reads; + +if (strcmp (bw_report,"writes" ) ==0 ) +return writes; + +return (reads + writes); +} + +void set_mbm_path(const char *ctrlgrp, const char *mongrp, char
sock_num)tools/testing/selftests/resctrl/membw.c new file +3
-0+{ +if (ctrlgrp && mongrp) + sprintf(mbm_total_path,
CON_MON_MBM_LOCAL_BYTES_PATH,tools/testing/selftests/resctrl/membw.c new file +3
-0+ RESCTRL_PATH, ctrlgrp, mongrp, sock_num); + else if (!ctrlgrp && mongrp) + sprintf(mbm_total_path, MON_MBM_LOCAL_BYTES_PATH,
RESCTRL_PATH,tools/testing/selftests/resctrl/membw.c new file +3
-0+ mongrp, sock_num); + else if (ctrlgrp && !mongrp) + sprintf(mbm_total_path, CON_MBM_LOCAL_BYTES_PATH,
RESCTRL_PATH,tools/testing/selftests/resctrl/membw.c new file +3
-0+ ctrlgrp, sock_num); + else if (!ctrlgrp && !mongrp) + sprintf(mbm_total_path, MBM_LOCAL_BYTES_PATH,
RESCTRL_PATH,tools/testing/selftests/resctrl/membw.c new file +6
-0+ sock_num); +} + +/* +* initialize_mem_bw_resctrl: Appropriately populate "mbm_total_path" +* @ctrlgrp: Name of the control monitor group (
con_mongrp)
+ * @mongrp: Name of the monitor group (mon grp)
+ * @cpu_no: CPU number that the benchmark PID is
binded to
+ * @resctrl_val: Resctrl feature (Eg: mbm, mba.. etc)
+ */
+static void initialize_mem_bw_resctrl(const char *ctrlgrp, const char *mongrp,tools/testing/selftests/resctrl/membw.c new file +14
-0+ int cpu_no, char *resctrl_val) +{ + char sock_num; + + sock_num =get_sock_num (cpu_no); +if (sock_num <0 ) +return ; + +if (strcmp (resctrl_val,"mbm" ) ==0 ) +set_mbm_path (ctrlgrp, mongrp, sock_num); + +if ((strcmp (resctrl_val,"mba" ) ==0 )) { +if (ctrlgrp) + sprintf(mbm_total_path,
CON_MBM_LOCAL_BYTES_PATH,tools/testing/selftests/resctrl/membw.c new file +11
-0+ RESCTRL_PATH, ctrlgrp, sock_num); + else +sprintf (mbm_total_path ,MBM_LOCAL_BYTES_PATH , +RESCTRL_PATH ,sock_num ); + } +} + +/* +* Get MBM Local bytes as reported by resctrl FS +* For MBM, +* 1. If con_mon grp and mon grp are given, then read from con_mon grp's mon grp
+ * 2. If onlycon_mongrp is given, then read fromcon_mongrp
+ * 3. If both are not given, then read from rootcon_mongrp
+ * For MBA,
+ * 1. Ifcon_mongrp is given, then read from it
+ * 2. Ifcon_mongrp is not given, then read from rootcon_mongrp
+ */tools/testing/selftests/resctrl/membw.c new file +14
-1+static unsigned long get_mem_bw_resctrl (void ) +{ +unsigned long mbm_total =0 ; +FILE *fp; + + fp =fopen (mbm_total_path,"r" ); +if (!fp ||fscanf (fp,"%lu" , &mbm_total) <=0 ||fclose (fp) ==EOF ) { +perror ("Could not get mbm local bytes" ); + +return -1 ; + } + +return mbm_total; +} --2.5.0
PATCH v2 4/8 selftests/resctrl: Add callback to start a benchmark
In reply to Fenghua YuFrom: Sai Praneeth Prakhya <[email protected]>
The callback starts a child process and puts the child pid in created resctrl group with specified memory bandwidth in schemata. The child starts running benchmark.
--- tools/testing/selftests/resctrl/membw.c | 273 ++++++++++++++++++++++++++++++ tools/testing/selftests/resctrl/resctrl.h | 27 +++ 2 files changed, 300 insertions(+)
tools/testing/selftests/resctrl/membw.c +273 -0
@@ -401,3 +401,276 @@ static unsigned long get_mem_bw_resctrl(void)return mbm_total; } + +pid_t bm_pid, ppid; + +static void ctrlc_handler (int signum,siginfo_t *info,void *ptr) +{ +kill (bm_pid,SIGKILL ); +printf ("Ending\n\n" ); + +exit (EXIT_SUCCESS ); +} + +/* +* print_results_bw: the memory bandwidth results are stored in a file +* @filename: file that stores the results +* @bm_pid: child pid that runs benchmark +* @bw_imc: perf imc counter value +* @bw_resc: memory bandwidth value +* +* Return: 0 on success. non-zero on failure. +*/ +static int print_results_bw (char *filename,int bm_pid,float bw_imc, +unsigned long bw_resc) +{ +int diff =abs (bw_imc - bw_resc); +FILE *fp; + +if (strcmp (filename,"stdio" ) ==0 ||strcmp (filename,"stderr" ) ==0 ) { +printf ("Pid: %d \t Mem_BW_iMC: %f \t " , bm_pid, bw_imc); +printf ("Mem_BW_resc: %lu \t Difference: %d\n" , bw_resc, diff); + }else { + fp =fopen (filename,"a" ); +if (!fp) { +perror ("Cannot open results file" ); + +return errno; + } +if (fprintf (fp,"Pid: %d \t Mem_BW_iMC: %f \t " , + bm_pid, bw_imc) <=0 || +fprintf (fp,"Mem_BW_resc: %lu \t Difference: %d\n" , + bw_resc, diff) <=0 ) { +fclose (fp); +perror ("Could not log results." ); + +return errno; + } +fclose (fp); + } + +return 0 ; +} + +static int +measure_vals (struct resctrl_val_param *param,unsigned long *bw_resc_start) +{ +unsigned long bw_imc, bw_resc, bw_resc_end; +int ret; + +/* +* Measure memory bandwidth from resctrl and from +* another source which is perf imc value or could +* be something else if perf imc event is not available. +* Compare the two values to validate resctrl value. +* It takes 1sec to measure the data. +*/ + bw_imc =get_mem_bw_imc (param->cpu_no, param->bw_report); +if (bw_imc <0 ) +return bw_imc; + + bw_resc_end =get_mem_bw_resctrl (); +if (bw_resc_end <0 ) +return bw_resc_end; + + bw_resc = (bw_resc_end - *bw_resc_start) /MB ; + ret =print_results_bw (param->filename, bm_pid, bw_imc, bw_resc); +if (ret) +return ret; + + *bw_resc_start = bw_resc_end; + +return 0 ; +} + +/* +* membw_val: execute benchmark and measure memory bandwidth on +* the benchmark +* @benchmark_cmd: benchmark command and its arguments +* @param: parameters passed to membw_val() +* +* Return: 0 on success. non-zero on failure. +*/ +int membw_val (char **benchmark_cmd,struct resctrl_val_param *param) +{ +char *resctrl_val = param->resctrl_val; +unsigned long bw_resc_start =0 ; +struct sigaction sigact; +union sigval value; +int sig =0 , ret =0 ; +FILE *fp; + +if (strcmp (param->filename,"" ) ==0 ) +sprintf (param->filename,"stdio" ); + +if (strcmp (param->bw_report,"" ) ==0 ) + param->bw_report ="total" ; + + ret =validate_resctrl_feature_request (resctrl_val); +if (ret) +return ret; + +if ((strcmp (resctrl_val,"mba" )) ==0 || + (strcmp (resctrl_val,"mbm" )) ==0 ) { + ret =validate_bw_report_request (param->bw_report); +if (ret) +return ret; + } + + ret =remount_resctrlfs (param->mum_resctrlfs); +if (ret) +return ret; + +/* +* If benchmark wasn't successfully started by child, then child should +* kill parent, so save parent's pid +*/ + ppid =getpid (); + +/* File based synchronization between parent and child */ + fp =fopen ("sig" ,"w" ); +if (!fp || (fprintf (fp,"%d\n" ,0 ) <=0 ) || (fclose (fp) ==EOF )) { +perror ("Unable to establish sync bw parent & child" ); + +return errno; + } + +/* +* Fork to start benchmark, save child's pid so that it can be killed +* when needed +*/ + bm_pid =fork (); +if (bm_pid ==-1 ) { +perror ("Unable to fork" ); + +return errno; + } + +if (bm_pid ==0 ) { +/* +* Mask all signals except SIGUSR1, parent uses SIGUSR1 to +* start benchmark +*/ +sigfillset (&sigact.sa_mask); +sigdelset (&sigact.sa_mask,SIGUSR1 ); + + sigact.sa_sigaction = run_benchmark; + sigact.sa_flags =SA_SIGINFO ; + +/* Register for "SIGUSR1" signal from parent */ +if (sigaction (SIGUSR1 , &sigact,NULL )) +PARENT_EXIT ("Can't register child for signal" ); + +/* Signal parent that child is ready */ + fp =fopen ("sig" ,"w" ); +if (!fp || (fprintf (fp,"%d\n" ,1 ) <=0 ) || + (fclose (fp) ==EOF )) +PARENT_EXIT ("can't signal that child is ready" ); + +/* Suspend child until delivery of "SIGUSR1" from parent */ +sigsuspend (&sigact.sa_mask); + } + +printf ("Benchmark PID: %d\n" , bm_pid); + +/* +* Register CTRL-C handler for parent, as it has to kill benchmark +* before exiting +*/ + sigact.sa_sigaction = ctrlc_handler; +sigemptyset (&sigact.sa_mask); + sigact.sa_flags =SA_SIGINFO ; +if (sigaction (SIGINT , &sigact,NULL ) || +sigaction (SIGHUP , &sigact,NULL )) { +perror ("Can't register parent for CTRL-C handler" ); + ret = errno; + goto out; + } + + value.sival_ptr = benchmark_cmd; + +/* Taskset benchmark to specified cpu */ + ret =taskset_benchmark (bm_pid, param->cpu_no); +if (ret) + goto out; + +/* Write benchmark to specified con_mon grp, mon_grp in resctrl FS*/ + ret =write_bm_pid_to_resctrl (bm_pid, param->ctrlgrp, param->mongrp, + resctrl_val); +if (ret) + goto out; + +if ((strcmp (resctrl_val,"mbm" ) ==0 ) || + (strcmp (resctrl_val,"mba" ) ==0 )) { + ret =initialize_mem_bw_imc (); +if (ret) + goto out; + +initialize_mem_bw_resctrl (param->ctrlgrp, param->mongrp, + param->cpu_no, resctrl_val); + } + +/* +* Parent should signal child to start executing benchmark only upon +* receiving a signal from child saying that it's ready +*/ +while (sig ==0 ) { + fp =fopen ("sig" ,"r" ); +if (!fp) { +perror ("Unable to open 'sig' file" ); + ret = errno; + goto out; + } +fscanf (fp,"%d\n" , &sig); +if (fclose (fp) ==EOF ) { +perror ("Unable to close 'sig' file" ); + ret = errno; + goto out; + } + } +if (system (RM_SIG_FILE ) !=0 ) +perror ("Unable to remove 'sig' file" ); + +/* Signal child to start benchmark */ +if (sigqueue (bm_pid,SIGUSR1 , value) ==-1 ) { +perror ("Unable to signal child to start execution" ); + ret = errno; + goto out; + } + +/* Give benchmark enough time to fully run */ +sleep (1 ); + +/* Test runs until the callback setup() tells the test to stop. */ +while (1 ) { +if (strcmp (resctrl_val,"mbm" ) ==0 ) { + ret = param->setup (1 , param); +if (ret) { + ret =0 ; +break ; + } + + ret =measure_vals (param, &bw_resc_start); +if (ret) +break ; + }else if ((strcmp (resctrl_val,"mba" ) ==0 )) { + ret = param->setup (1 , param->cpu_no); +if (ret) { + ret =0 ; +break ; + } + + ret =measure_vals (param, &bw_resc_start); +if (ret) +break ; + }else { +break ; + } + } + +out: +kill (bm_pid,SIGKILL ); +umount_resctrlfs (); + +return ret; +}
tools/testing/selftests/resctrl/resctrl.h +27 -0
@@ -3,6 +3,7 @@#ifndef RESCTRL_H #define RESCTRL_H #include <stdio.h> +#include <stdarg.h> #include <errno.h> #include <sched.h> #include <stdlib.h>
@@ -33,10 +34,35 @@exit (EXIT_FAILURE ); \ }while (0 ) +/* +* resctrl_val_param: resctrl test parameters +* @resctrl_val: Resctrl feature (Eg: mbm, mba.. etc) +* @ctrlgrp: Name of the control monitor group (con_mon grp) +* @mongrp: Name of the monitor group (mon grp) +* @cpu_no: CPU number to which the benchmark would be binded +* @mum_resctrlfs: Should the resctrl FS be remounted? +* @filename: Name of file to which the o/p should be written +* @bw_report: Bandwidth report type (reads vs writes) +* @setup: Call back function to setup test environment +*/ +struct resctrl_val_param { +char *resctrl_val; +char ctrlgrp[64 ]; +char mongrp[64 ]; +int cpu_no; +int span; +int mum_resctrlfs; +char filename[64 ]; +char *bw_report; +char *bm_type; +int (*setup)(int num, ...); +}; +pid_t bm_pid, ppid;int ben_count;int remount_resctrlfs (bool mum_resctrlfs); +int umount_resctrlfs (void );char get_sock_num (int cpu_no);int validate_bw_report_request (char *bw_report);int validate_resctrl_feature_request (char *resctrl_val);
@@ -49,5 +75,6 @@ int write_bm_pid_to_resctrl(pid_t bm_pid, char *ctrlgrp, char *mongrp,int perf_event_open (struct perf_event_attr *hw_event,pid_t pid,int cpu,int group_fd,unsigned long flags);int run_fill_buf (int span,int malloc_and_init_memory,int memflush,int op); +int membw_val (char **benchmark_cmd,struct resctrl_val_param *param);#endif /* RESCTRL_H */
Signature · 1 line
2.5.0
Moger, Babu
reviewerRE: [PATCH v2 4/8] selftests/resctrl: Add callback to start a benchmark
Hi Fenghua/Sai,
Quoted 164 lines
-----Original Message-----
From: Fenghua Yu <[email protected]>
Sent: Thursday, October 25, 2018 6:07 PM
To: Thomas Gleixner <[email protected]>; Ingo Molnar <[email protected]>; H Peter Anvin <[email protected]>; Tony Luck <[email protected]>; Peter Zijlstra <[email protected]>; Reinette Chatre <[email protected]>; Moger, Babu <[email protected]>; James Morse <[email protected]>; Ravi V Shankar <[email protected]>; Sai Praneeth Prakhya <[email protected]>; Arshiya Hayatkhan Pathan <[email protected]>
Cc: linux-kernel <[email protected]>; Fenghua Yu <[email protected]>
Subject: [PATCH v2 4/8] selftests/resctrl: Add callback to start a benchmarkFrom: Sai Praneeth Prakhya <[email protected]>
The callback starts a child process and puts the child pid in created resctrl group with specified memory bandwidth in schemata. The child starts running benchmark.
Signed-off-by Sai Praneeth Prakhya <[email protected]>Signed-off-by Arshiya Hayatkhan PathanSigned-off-by Fenghua Yu <[email protected]>--- tools/testing/selftests/resctrl/membw.c | 273 ++++++++++++++++++++++++++++++ tools/testing/selftests/resctrl/resctrl.h | 27 +++ 2 files changed, 300 insertions(+)tools/testing/selftests/resctrl/membw.c +27
-0@@ -401,3 +401,276 @@ static unsigned long get_mem_bw_resctrl(void)return mbm_total; } + +pid_t bm_pid, ppid; + +static void ctrlc_handler (int signum,siginfo_t *info,void *ptr) +{ +kill (bm_pid,SIGKILL ); +printf ("Ending\n\n" ); + +exit (EXIT_SUCCESS ); +} + +/* +* print_results_bw: the memory bandwidth results are stored in a file +* @filename: file that stores the results +* @bm_pid: child pid that runs benchmark +* @bw_imc: perf imc counter value +* @bw_resc: memory bandwidth value +* +* Return: 0 on success. non-zero on failure. +*/ +static int print_results_bw (char *filename,int bm_pid,float bw_imc, +unsigned long bw_resc) +{ +int diff =abs (bw_imc - bw_resc); +FILE *fp; + +if (strcmp (filename,"stdio" ) ==0 ||strcmp (filename,"stderr" ) ==0 ){
tools/testing/selftests/resctrl/membw.c +2
-0+printf ("Pid: %d \t Mem_BW_iMC: %f \t " , bm_pid, bw_imc); + printf("Mem_BW_resc: %lu \t Difference: %d\n", bw_resc,diff);
tools/testing/selftests/resctrl/membw.c +24
-0+ }else { + fp =fopen (filename,"a" ); +if (!fp) { +perror ("Cannot open results file" ); + +return errno; + } +if (fprintf (fp,"Pid: %d \t Mem_BW_iMC: %f \t " , + bm_pid, bw_imc) <=0 || +fprintf (fp,"Mem_BW_resc: %lu \t Difference: %d\n" , + bw_resc, diff) <=0 ) { +fclose (fp); +perror ("Could not log results." ); + +return errno; + } +fclose (fp); + } + +return 0 ; +} + +static int +measure_vals(struct resctrl_val_param *param, unsigned long
*bw_resc_start)tools/testing/selftests/resctrl/membw.c +21
-0+{ +unsigned long bw_imc, bw_resc, bw_resc_end; +int ret; + +/* +* Measure memory bandwidth from resctrl and from +* another source which is perf imc value or could +* be something else if perf imc event is not available. +* Compare the two values to validate resctrl value. +* It takes 1sec to measure the data. +*/ + bw_imc =get_mem_bw_imc (param->cpu_no, param->bw_report); +if (bw_imc <0 ) +return bw_imc; + + bw_resc_end =get_mem_bw_resctrl (); +if (bw_resc_end <0 ) +return bw_resc_end; + + bw_resc = (bw_resc_end - *bw_resc_start) /MB ; + ret = print_results_bw(param->filename, bm_pid, bw_imc,
bw_resc);tools/testing/selftests/resctrl/membw.c +10
-0+if (ret) +return ret; + + *bw_resc_start = bw_resc_end; + +return 0 ; +} + +/* +* membw_val: execute benchmark and measure memory bandwidth on
+ * the benchmark
+ * @benchmark_cmd: benchmark command and its arguments
+ * @param: parameters passed tomembw_val()
+ *
+ * Return: 0 on success. non-zero on failure.
+ */tools/testing/selftests/resctrl/membw.c +29
-0+int membw_val (char **benchmark_cmd,struct resctrl_val_param *param) +{ +char *resctrl_val = param->resctrl_val; +unsigned long bw_resc_start =0 ; +struct sigaction sigact; +union sigval value; +int sig =0 , ret =0 ; +FILE *fp; + +if (strcmp (param->filename,"" ) ==0 ) +sprintf (param->filename,"stdio" ); + +if (strcmp (param->bw_report,"" ) ==0 ) + param->bw_report ="total" ; + + ret =validate_resctrl_feature_request (resctrl_val); +if (ret) +return ret; + +if ((strcmp (resctrl_val,"mba" )) ==0 || + (strcmp (resctrl_val,"mbm" )) ==0 ) { + ret =validate_bw_report_request (param->bw_report); +if (ret) +return ret; + } + + ret =remount_resctrlfs (param->mum_resctrlfs); +if (ret) +return ret;
tools/testing/selftests/resctrl/membw.c static unsigned long get_mem_bw_resctrl(void) · line 532
Quoted 10 lines
tools/testing/selftests/resctrl/membw.c +10
-0+ +/* +* If benchmark wasn't successfully started by child, then child should +* kill parent, so save parent's pid +*/ + ppid =getpid (); + +/* File based synchronization between parent and child */ + fp =fopen ("sig" ,"w" ); +if (!fp || (fprintf (fp,"%d\n" ,0 ) <=0 ) || (fclose (fp) ==EOF )) {
Same comment as patch 2. If fprintf fails, will it fclose the file? I suggest to separate these checks.
Quoted 25 lines
tools/testing/selftests/resctrl/membw.c +25
-0+perror ("Unable to establish sync bw parent & child" ); + +return errno; + } + +/* +* Fork to start benchmark, save child's pid so that it can be killed +* when needed +*/ + bm_pid =fork (); +if (bm_pid ==-1 ) { +perror ("Unable to fork" ); + +return errno; + } + +if (bm_pid ==0 ) { +/* +* Mask all signals except SIGUSR1, parent uses SIGUSR1 to +* start benchmark +*/ +sigfillset (&sigact.sa_mask); +sigdelset (&sigact.sa_mask,SIGUSR1 ); + + sigact.sa_sigaction = run_benchmark;
tools/testing/selftests/resctrl/membw.c static unsigned long get_mem_bw_resctrl(void) · line 567
Quoted 10 lines
tools/testing/selftests/resctrl/membw.c +10
-0+ sigact.sa_flags =SA_SIGINFO ; + +/* Register for "SIGUSR1" signal from parent */ +if (sigaction (SIGUSR1 , &sigact,NULL )) +PARENT_EXIT ("Can't register child for signal" ); + +/* Signal parent that child is ready */ + fp =fopen ("sig" ,"w" ); +if (!fp || (fprintf (fp,"%d\n" ,1 ) <=0 ) || + (fclose (fp) ==EOF ))
Same comment as above. If fprintf fails, will it fclose the file? I suggest to separate these checks.
Quoted 171 lines
tools/testing/selftests/resctrl/membw.c +30
-0+PARENT_EXIT ("can't signal that child is ready" ); + +/* Suspend child until delivery of "SIGUSR1" from parent */ +sigsuspend (&sigact.sa_mask); + } + +printf ("Benchmark PID: %d\n" , bm_pid); + +/* +* Register CTRL-C handler for parent, as it has to kill benchmark +* before exiting +*/ + sigact.sa_sigaction = ctrlc_handler; +sigemptyset (&sigact.sa_mask); + sigact.sa_flags =SA_SIGINFO ; +if (sigaction (SIGINT , &sigact,NULL ) || +sigaction (SIGHUP , &sigact,NULL )) { +perror ("Can't register parent for CTRL-C handler" ); + ret = errno; + goto out; + } + + value.sival_ptr = benchmark_cmd; + +/* Taskset benchmark to specified cpu */ + ret =taskset_benchmark (bm_pid, param->cpu_no); +if (ret) + goto out; + +/* Write benchmark to specified con_mon grp, mon_grp in resctrl FS*/
tools/testing/selftests/resctrl/membw.c +1
-0+ ret = write_bm_pid_to_resctrl(bm_pid, param->ctrlgrp, param-Quoted 1 line
mongrp,
tools/testing/selftests/resctrl/membw.c +78
-0+ resctrl_val); +if (ret) + goto out; + +if ((strcmp (resctrl_val,"mbm" ) ==0 ) || + (strcmp (resctrl_val,"mba" ) ==0 )) { + ret =initialize_mem_bw_imc (); +if (ret) + goto out; + +initialize_mem_bw_resctrl (param->ctrlgrp, param->mongrp, + param->cpu_no, resctrl_val); + } + +/* +* Parent should signal child to start executing benchmark only upon +* receiving a signal from child saying that it's ready +*/ +while (sig ==0 ) { + fp =fopen ("sig" ,"r" ); +if (!fp) { +perror ("Unable to open 'sig' file" ); + ret = errno; + goto out; + } +fscanf (fp,"%d\n" , &sig); +if (fclose (fp) ==EOF ) { +perror ("Unable to close 'sig' file" ); + ret = errno; + goto out; + } + } +if (system (RM_SIG_FILE ) !=0 ) +perror ("Unable to remove 'sig' file" ); + +/* Signal child to start benchmark */ +if (sigqueue (bm_pid,SIGUSR1 , value) ==-1 ) { +perror ("Unable to signal child to start execution" ); + ret = errno; + goto out; + } + +/* Give benchmark enough time to fully run */ +sleep (1 ); + +/* Test runs until the callback setup() tells the test to stop. */ +while (1 ) { +if (strcmp (resctrl_val,"mbm" ) ==0 ) { + ret = param->setup (1 , param); +if (ret) { + ret =0 ; +break ; + } + + ret =measure_vals (param, &bw_resc_start); +if (ret) +break ; + }else if ((strcmp (resctrl_val,"mba" ) ==0 )) { + ret = param->setup (1 , param->cpu_no); +if (ret) { + ret =0 ; +break ; + } + + ret =measure_vals (param, &bw_resc_start); +if (ret) +break ; + }else { +break ; + } + } + +out: +kill (bm_pid,SIGKILL ); +umount_resctrlfs (); + +return ret; +}tools/testing/selftests/resctrl/resctrl.h +7
-0@@ -3,6 +3,7 @@#ifndef RESCTRL_H #define RESCTRL_H #include <stdio.h> +#include <stdarg.h> #include <errno.h> #include <sched.h> #include <stdlib.h> @@ -33,10 +34,35 @@exit (EXIT_FAILURE ); \ }while (0 ) +/* +* resctrl_val_param: resctrl test parameters +* @resctrl_val: Resctrl feature (Eg: mbm, mba.. etc) +* @ctrlgrp: Name of the control monitor group (con_mon grp) +* @mongrp: Name of the monitor group (mon grp) +* @cpu_no: CPU number to which the benchmark would be binded
+ * @mum_resctrlfs: Should the resctrl FS be remounted?
+ * @filename: Name of file to which the o/p should be written
+ * @bw_report: Bandwidth report type (reads vs writes)
+ * @setup: Call back function to setup test environment
+ */tools/testing/selftests/resctrl/resctrl.h +15
-0+struct resctrl_val_param { +char *resctrl_val; +char ctrlgrp[64 ]; +char mongrp[64 ]; +int cpu_no; +int span; +int mum_resctrlfs; +char filename[64 ]; +char *bw_report; +char *bm_type; +int (*setup)(int num, ...); +}; +pid_t bm_pid, ppid;int ben_count;int remount_resctrlfs (bool mum_resctrlfs); +int umount_resctrlfs (void );char get_sock_num (int cpu_no);int validate_bw_report_request (char *bw_report);int validate_resctrl_feature_request (char *resctrl_val);@@ -49,5 +75,6 @@ int write_bm_pid_to_resctrl(pid_t bm_pid, char *ctrlgrp, char *mongrp, int perf_event_open(struct perf_event_attr *hw_event, pid_t pid, int cpu, int group_fd, unsigned long flags);int run_fill_buf (int span,int malloc_and_init_memory,int memflush,int op); +int membw_val (char **benchmark_cmd,struct resctrl_val_param *param);#endif /*
RESCTRL_H*/
--
2.5.0
PATCH v2 5/8 selftests/resctrl: Add built in benchmark
In reply to Fenghua YuFrom: Sai Praneeth Prakhya <[email protected]>
Built-in benchmark fill_buf generates stressful memory bandwidth and cache traffic.
Later it will be used as a default benchmark by various resctrl tests such as MBA (Memory Bandwidth Allocation) and MBM (Memory Bandwidth Monitoring) tests.
--- tools/testing/selftests/resctrl/fill_buf.c | 175 +++++++++++++++++++++++++++++ 1 file changed, 175 insertions(+) create mode 100644 tools/testing/selftests/resctrl/fill_buf.c
tools/testing/selftests/resctrl/fill_buf.c new file +175 -0
@@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* fill_buf benchmark +* +* Copyright (C) 2018 Intel Corporation +* +* Authors: +* Arshiya Hayatkhan Pathan <[email protected]> +* Sai Praneeth Prakhya <[email protected]>, +* Fenghua Yu <[email protected]> +*/ +#include <stdio.h> +#include <unistd.h> +#include <stdlib.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <inttypes.h> +#include <malloc.h> +#include <string.h> + +#include "resctrl.h" + +#define CL_SIZE (64) +#define PAGE_SIZE (4 * 1024) +#define MB (1024 * 1024) + +static unsigned char *startptr; + +static void sb (void ) +{ + asmvolatile ("sfence\n\t" + : : :"memory" ); +} + +static void ctrl_handler (int signo) +{ +free (startptr); +printf ("\nEnding\n" ); +sb (); +exit (EXIT_SUCCESS ); +} + +static void cl_flush (void *p) +{ + asmvolatile ("clflush (%0)\n\t" + : :"r" (p) :"memory" ); +} + +static void mem_flush (void *p,size_t s) +{ +char *cp = (char *)p; +size_t i =0 ; + + s = s /CL_SIZE ;/* mem size in cache llines */ + +for (i =0 ; i < s; i++) +cl_flush (&cp[i *CL_SIZE ]); + +sb (); +} + +static void *malloc_and_init_memory (size_t s) +{ +uint64_t *p64; +size_t s64; + +void *p =memalign (PAGE_SIZE , s); + + p64 = (uint64_t *)p; + s64 = s /sizeof (uint64_t ); + +while (s64 >0 ) { + *p64 = (uint64_t )rand (); + p64 += (CL_SIZE /sizeof (uint64_t )); + s64 -= (CL_SIZE /sizeof (uint64_t )); + } + +return p; +} + +static void fill_cache_read (unsigned char *start_ptr,unsigned char *end_ptr) +{ +while (1 ) { +unsigned char sum, *p; + + p = start_ptr; +/* Read two chars in each cache line to stress cache */ +while (p < (end_ptr -1024 )) { + sum += p[0 ] + p[32 ] + p[64 ] + p[96 ] + p[128 ] + + p[160 ] + p[192 ] + p[224 ] + p[256 ] + p[288 ] + + p[320 ] + p[352 ] + p[384 ] + p[416 ] + p[448 ] + + p[480 ] + p[512 ] + p[544 ] + p[576 ] + p[608 ] + + p[640 ] + p[672 ] + p[704 ] + p[736 ] + p[768 ] + + p[800 ] + p[832 ] + p[864 ] + p[896 ] + p[928 ] + + p[960 ] + p[992 ]; + p +=1024 ; + } + } +} + +static void fill_cache_write (unsigned char *start_ptr,unsigned char *end_ptr) +{ +while (1 ) { +while (start_ptr < end_ptr) { + *start_ptr ='1' ; + start_ptr += (CL_SIZE /2 ); + } + start_ptr = startptr; + } +} + +static void +fill_cache (unsigned long long buf_size,int malloc_and_init, +int memflush,int op) +{ +unsigned char *start_ptr, *end_ptr; +unsigned long long i; + +if (malloc_and_init) { + start_ptr =malloc_and_init_memory (buf_size); +printf ("Started benchmark with memalign\n" ); + }else { + start_ptr =malloc (buf_size); +printf ("Started benchmark with malloc\n" ); + } + +if (!start_ptr) +return ; + + startptr = start_ptr; + end_ptr = start_ptr + buf_size; + +/* +* It's better to touch the memory once to avoid any compiler +* optimizations +*/ +if (!malloc_and_init) { +for (i =0 ; i < buf_size; i++) + *start_ptr++ = (unsigned char )rand (); + } + + start_ptr = startptr; + +/* Flush the memory before using to avoid "cache hot pages" effect */ +if (memflush) { +mem_flush (start_ptr, buf_size); +printf ("Started benchmark with memflush\n" ); + }else { +printf ("Started benchmark *without* memflush\n" ); + } + +if (op ==0 ) +fill_cache_read (start_ptr, end_ptr); +else +fill_cache_write (start_ptr, end_ptr); + +free (startptr); +} + +int run_fill_buf (int span,int malloc_and_init_memory,int memflush,int op) +{ +unsigned long long cache_size = span *MB ; + +/* set up ctrl-c handler */ +if (signal (SIGINT , ctrl_handler) ==SIG_ERR ) +printf ("Failed to catch SIGINT!\n" ); +if (signal (SIGHUP , ctrl_handler) ==SIG_ERR ) +printf ("Failed to catch SIGHUP!\n" ); + +printf ("Cache size in Bytes = %llu\n" , cache_size); + +fill_cache (cache_size, malloc_and_init_memory, memflush, op); + +return -1 ; +}
Signature · 1 line
2.5.0
PATCH v2 6/8 selftests/resctrl: Add mbm test
In reply to Fenghua YuFrom: Arshiya Hayatkhan Pathan <[email protected]>
mbm test is the first implemented selftest. It starts a stressful memory bandwidth benchmark and assigns the bandwidth pid in a resctrl monitoring group. Read and compare perf IMC counter and mbm total bytes for the benchmark. The numbers should be close enough to pass the test.
Default benchmark is built-in fill_buf. But users can specify their own benchmark by option "-b".
We can add memory bandwidth monitoring for multiple processes in the future.
--- tools/testing/selftests/resctrl/Makefile | 8 +- tools/testing/selftests/resctrl/mbm_test.c | 143 ++++++++++++++++++++++++ tools/testing/selftests/resctrl/membw.c | 2 + tools/testing/selftests/resctrl/resctrl.h | 4 + tools/testing/selftests/resctrl/resctrl_tests.c | 124 ++++++++++++++++++++ 5 files changed, 280 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/resctrl/mbm_test.c create mode 100644 tools/testing/selftests/resctrl/resctrl_tests.c
tools/testing/selftests/resctrl/Makefile +7 -1
@@ -1,10 +1,16 @@ CC = gcc CFLAGS = -g -Wall +all: resctrl_tests + *.o: *.c $(CC) $(CFLAGS) -c *.c +resctrl_tests: *.o + $(CC) $(CFLAGS) -o resctrl_tests resctrl_tests.o resctrlfs.o \ + membw.o fill_buf.o mbm_test.o + .PHONY: clean clean: - $(RM) *.o *~ + $(RM) *.o *~ resctrl_tests
tools/testing/selftests/resctrl/mbm_test.c new file +143 -0
143 lines not on this page · raw message
tools/testing/selftests/resctrl/membw.c +2 -0
@@ -407,6 +407,8 @@ pid_t bm_pid, ppid;static void ctrlc_handler (int signum,siginfo_t *info,void *ptr) {kill (bm_pid,SIGKILL ); +umount_resctrlfs (); +tests_cleanup ();printf ("Ending\n\n" );exit (EXIT_SUCCESS );
tools/testing/selftests/resctrl/resctrl.h +4 -0
@@ -76,5 +76,9 @@ int perf_event_open(struct perf_event_attr *hw_event, pid_t pid, int cpu, int group_fd, unsigned long flags);int run_fill_buf (int span,int malloc_and_init_memory,int memflush,int op);int membw_val (char **benchmark_cmd,struct resctrl_val_param *param); +int mbm_bw_change (char *resctrl_val_type,int core_id,int span, +char *bw_report,char *bm_type,char **benchmark_cmd); +void tests_cleanup (void ); +void mbm_test_cleanup (void );#endif /* RESCTRL_H */
tools/testing/selftests/resctrl/resctrl_tests.c new file +124 -0
124 lines not on this page · raw message
Signature · 1 line
2.5.0
PATCH v2 7/8 selftests/resctrl: Add mba test
In reply to Fenghua YuFrom: Arshiya Hayatkhan Pathan <[email protected]>
mba test starts a stressful memory bandwidth benchmark and allocates memory bandwidth from 100% down to 10% for the benchmark process. For each allocation, compare perf IMC counter and mbm total bytes from resctrl. The difference between the two values should be within a threshold to pass the test.
Default benchmark is built-in fill_buf. But users can specify their own benchmark by option "-b".
We can add memory bandwidth allocation for multiple processes in the future.
--- tools/testing/selftests/resctrl/Makefile | 2 +- tools/testing/selftests/resctrl/mba_test.c | 175 ++++++++++++++++++++++++ tools/testing/selftests/resctrl/resctrl.h | 4 + tools/testing/selftests/resctrl/resctrl_tests.c | 16 ++- 4 files changed, 195 insertions(+), 2 deletions(-) create mode 100644 tools/testing/selftests/resctrl/mba_test.c
tools/testing/selftests/resctrl/Makefile +1 -1
@@ -8,7 +8,7 @@ all: resctrl_tests resctrl_tests: *.o $(CC) $(CFLAGS) -o resctrl_tests resctrl_tests.o resctrlfs.o \ - membw.o fill_buf.o mbm_test.o + membw.o fill_buf.o mbm_test.o mba_test.o .PHONY: clean
tools/testing/selftests/resctrl/mba_test.c new file +175 -0
175 lines not on this page · raw message
tools/testing/selftests/resctrl/resctrl.h +4 -0
@@ -80,5 +80,9 @@ int mbm_bw_change(char *resctrl_val_type, int core_id, int span, char *bw_report, char *bm_type, char **benchmark_cmd);void tests_cleanup (void );void mbm_test_cleanup (void ); +int mba_schemata_change (char *resctrl_val_type,int core_id,int span, +char *bw_report,char *bm_type, +char **benchmark_cmd); +void mba_test_cleanup (void );#endif /* RESCTRL_H */
tools/testing/selftests/resctrl/resctrl_tests.c +15 -1
@@ -29,13 +29,14 @@ static void cmd_help(void)void tests_cleanup (void ) {mbm_test_cleanup (); +mba_test_cleanup (); }int main (int argc,char **argv) {char benchmark_cmd_area[BENCHMARK_ARGS ][BENCHMARK_ARG_SIZE ];int res, c, core_id =0 , span =250 , argc_new = argc, i; -bool has_ben = false, mbm_test = true; +bool has_ben = false, mbm_test = true, mba_test = true;char *benchmark_cmd[BENCHMARK_ARGS ];char bw_report[64 ], bm_type[64 ];
@@ -47,9 +48,12 @@ int main(int argc, char **argv) token =strtok (optarg,"," ); mbm_test = false; + mba_test = false;while (token) {if (!strcmp (token,"mbm" )) { mbm_test = true; + }else if (!strcmp (token,"mba" )) { + mba_test = true; }else {printf ("invalid argument\n" );
@@ -120,5 +124,15 @@ int main(int argc, char **argv)printf ("Error in running tests for mbm bw change!\n" ); } +if (mba_test) { +printf ("\nMBA Schemata Change Starting..\n" ); +if (!has_ben) +sprintf (benchmark_cmd[1 ],"%d" , span); + res =mba_schemata_change ("mba" , core_id, span, bw_report, + bm_type, benchmark_cmd); +if (res) +printf ("Error in tests for mba-change-schemata!\n" ); + } +return 0 ; }
Signature · 1 line
2.5.0
PATCH v2 8/8 selftests/resctrl: Add the test in MAINTAINERS
In reply to Fenghua YuThe resctrl selftests will be maintained by RDT maintainers.
--- MAINTAINERS | 1 + 1 file changed, 1 insertion(+)
MAINTAINERS +1 -0
@@ -12270,6 +12270,7 @@ S: Supported F: arch/x86/kernel/cpu/intel_rdt* F: arch/x86/include/asm/intel_rdt_sched.h F: Documentation/x86/intel_rdt* +F: tools/testing/selftests/resctrl READ-COPY UPDATE (RCU) M: "Paul E. McKenney" <[email protected]>
Signature · 1 line
2.5.0
Moger, Babu
reviewerHi Fenghua,
Quoted 39 lines
-----Original Message-----
From: [email protected] <linux-kernel- [email protected]> On Behalf Of Fenghua Yu
Sent: Thursday, October 25, 2018 6:07 PM
To: Thomas Gleixner <[email protected]>; Ingo Molnar <[email protected]>; H Peter Anvin <[email protected]>; Tony Luck <[email protected]>; Peter Zijlstra <[email protected]>; Reinette Chatre <[email protected]>; Moger, Babu <[email protected]>; James Morse <[email protected]>; Ravi V Shankar <[email protected]>; Sai Praneeth Prakhya <[email protected]>; Arshiya Hayatkhan Pathan <[email protected]>
Cc: linux-kernel <[email protected]>; Fenghua Yu <[email protected]>
Subject: [PATCH v2 0/8] selftests/resctrl: Add resctrl selftestWith more and more resctrl features are being added by Intel, AMD and ARM, a test tool is becoming more and more useful to validate that both hardware and software functionalities work as expected.
We introduce resctrl selftest to cover resctrl features on both X86 and ARM architectures. It first implements MBM (Memory Bandwidth Monitoring) and MBA (Memory Bandwidth Allocation) tests. We can enhance
the selftest tool to include more functionality tests in future.There is an existing resctrl test suit '
intel_cmt_cat'. But the major purpose of the tool is to test Intel(R) RDT hardware via writing and reading MSR registers. It does access resctrl file system; but the functionalities are very limited. And it doesn't support automatic test and a lot of manual verifications are involved.So the selftest tool we are introducing here provides a convenient tool which does automatic resctrl testing, is easily available in kernel tree, and will be extended to AMD QoS and ARM MPAM.
The selftest tool is in
tools/testing/selftests/resctrlin order to have generic test code for all architectures.
Quoted 8 lines
Changelog:
v2:
- Change code based on comments from Babu Moger
- Clean up other places.Arshiya Hayatkhan Pathan (2):
selftests/resctrl: Add mbm test
selftests/resctrl: Add mba test
I suggest to use MBM and MBA(all caps) while talking about these features. Same applies in each individual patches.
Quoted 36 lines
Fenghua Yu (2):
selftests/resctrl: Add README for resctrl tests
selftests/resctrl: Add the test inMAINTAINERSSai Praneeth Prakhya (4):
selftests/resctrl: Add basic resctrl file system operations and data selftests/resctrl: Read memory bandwidth from perf IMC counter and
from resctrl file system
selftests/resctrl: Add callback to start a benchmark selftests/resctrl: Add built in benchmarkMAINTAINERS | 1 + tools/testing/selftests/resctrl/Makefile | 16 + tools/testing/selftests/resctrl/README | 53 ++ tools/testing/selftests/resctrl/fill_buf.c | 175 ++++++ tools/testing/selftests/resctrl/mba_test.c | 175 ++++++ tools/testing/selftests/resctrl/mbm_test.c | 143 +++++ tools/testing/selftests/resctrl/membw.c | 678 ++++++++++++++++++++++++ tools/testing/selftests/resctrl/resctrl.h | 88 +++ tools/testing/selftests/resctrl/resctrl_tests.c | 138 +++++ tools/testing/selftests/resctrl/resctrlfs.c | 465 ++++++++++++++++ 10 files changed, 1932 insertions(+) create mode 100644 tools/testing/selftests/resctrl/Makefile create mode 100644 tools/testing/selftests/resctrl/README create mode 100644 tools/testing/selftests/resctrl/fill_buf.c create mode 100644 tools/testing/selftests/resctrl/mba_test.c create mode 100644 tools/testing/selftests/resctrl/mbm_test.c create mode 100644 tools/testing/selftests/resctrl/membw.c create mode 100644 tools/testing/selftests/resctrl/resctrl.h create mode 100644 tools/testing/selftests/resctrl/resctrl_tests.c create mode 100644 tools/testing/selftests/resctrl/resctrlfs.c--
2.5.0