mx27: Add basic support for Maxtrack i-MXT TD60
Subsystems (2)
PATCH v2 1/1 mx27: Add basic support for Maxtrack i-MXT TD60
--- arch/arm/mach-mx2/Kconfig | 7 ++ arch/arm/mach-mx2/Makefile | 1 + arch/arm/mach-mx2/mxt_td60.c | 245 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 253 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mx2/mxt_td60.c
arch/arm/mach-mx2/Kconfig +7 -0
@@ -104,4 +104,11 @@ config MACH_PCA100 Include support for phyCARD-s (aka pca100) platform. This includes specific configurations for the module and its peripherals. +config MACH_MXT_TD60 + bool "Maxtrack i-MXT TD60" + depends on MACH_MX27 + help + Include support for i-MXT (aka td60) platform. This + includes specific configurations for the module and its peripherals. + endif
arch/arm/mach-mx2/Makefile +1 -0
@@ -20,4 +20,5 @@ obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += pca100.o +obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
arch/arm/mach-mx2/mxt_td60.c new file +245 -0
245 lines not on this page · raw message
Signature · 1 line
1.6.0.4
PATCH v2 1/1 mx27: Add basic support for Maxtrack i-MXT TD60
Quoted 74 lines · Alan Carvalho de Assis
Signed-off-by Alan Carvalho de Assis <[email protected]>---
?arch/arm/mach-mx2/Kconfig ? ?| ? ?7 ++ ?arch/arm/mach-mx2/Makefile ? | ? ?1 + ?arch/arm/mach-mx2/mxt_td60.c | ?245 ++++++++++++++++++++++++++++++++++++++++++?3 files changed, 253 insertions(+), 0 deletions(-) ?create mode 100644
arch/arm/mach-mx2/mxt_td60.carch/arm/mach-mx2/Kconfig +0
-0@@ -104,4 +104,11 @@ config MACH_PCA100? ? ? ? ?Include support for phyCARD-s (aka pca100) platform. This ? ? ? ? ?includes specific configurations for the module and its peripherals.
arch/arm/mach-mx2/Kconfig +7
-0+config MACH_MXT_TD60 + ? ? ? bool "Maxtrack i-MXT TD60" + ? ? ? depends on MACH_MX27 + ? ? ? help + ? ? ? ? Include support for i-MXT (aka td60) platform. This + ? ? ? ? includes specific configurations for the module and its peripherals. +?endif
arch/arm/mach-mx2/Makefile +0
-0@@ -20,4 +20,5 @@ obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o?obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o ?obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o ?obj-$(CONFIG_MACH_PCA100) += pca100.o
arch/arm/mach-mx2/Makefile +1
-0+obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.oarch/arm/mach-mx2/mxt_td60.c new file +34
-0@@ -0,0 +1,245 @@ +/* +* ?Copyright (C) 2000 Deep Blue Solutions Ltd +* ?Copyright (C) 2002 Shane Nay (shane at minirl.com) +* ?Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA ?02111-1307 ?USA +*/ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <linux/gpio.h>
arch/arm/mach-mx2/mxt_td60.c line 44
Quoted 10 lines
arch/arm/mach-mx2/mxt_td60.c new file +10
-0+#include <mach/imx-uart.h> +#include <mach/iomux.h> +#include <mach/mxc_nand.h> +#include <mach/i2c.h> +#include <mach/imxfb.h> +#include <mach/mmc.h> + +#include "devices.h" + +static unsigned int mxt_td60_pins[] = {
shouldn't this be __initdata?
Quoted 209 lines
arch/arm/mach-mx2/mxt_td60.c new file +201
-1+ ? ? ? /* UART0 */ + ? ? ? PE12_PF_UART1_TXD, + ? ? ? PE13_PF_UART1_RXD, + ? ? ? PE14_PF_UART1_CTS, + ? ? ? PE15_PF_UART1_RTS, + ? ? ? /* UART1 */ + ? ? ? PE3_PF_UART2_CTS, + ? ? ? PE4_PF_UART2_RTS, + ? ? ? PE6_PF_UART2_TXD, + ? ? ? PE7_PF_UART2_RXD, + ? ? ? /* UART2 */ + ? ? ? PE8_PF_UART3_TXD, + ? ? ? PE9_PF_UART3_RXD, + ? ? ? PE10_PF_UART3_CTS, + ? ? ? PE11_PF_UART3_RTS, + ? ? ? /* UART3 */ + ? ? ? PB26_AF_UART4_RTS, + ? ? ? PB28_AF_UART4_TXD, + ? ? ? PB29_AF_UART4_CTS, + ? ? ? PB31_AF_UART4_RXD, + ? ? ? /* UART4 */ + ? ? ? PB18_AF_UART5_TXD, + ? ? ? PB19_AF_UART5_RXD, + ? ? ? PB20_AF_UART5_CTS, + ? ? ? PB21_AF_UART5_RTS, + ? ? ? /* UART5 */ + ? ? ? PB10_AF_UART6_TXD, + ? ? ? PB12_AF_UART6_CTS, + ? ? ? PB11_AF_UART6_RXD, + ? ? ? PB13_AF_UART6_RTS, + ? ? ? /* FEC */ + ? ? ? PD0_AIN_FEC_TXD0, + ? ? ? PD1_AIN_FEC_TXD1, + ? ? ? PD2_AIN_FEC_TXD2, + ? ? ? PD3_AIN_FEC_TXD3, + ? ? ? PD4_AOUT_FEC_RX_ER, + ? ? ? PD5_AOUT_FEC_RXD1, + ? ? ? PD6_AOUT_FEC_RXD2, + ? ? ? PD7_AOUT_FEC_RXD3, + ? ? ? PD8_AF_FEC_MDIO, + ? ? ? PD9_AIN_FEC_MDC, + ? ? ? PD10_AOUT_FEC_CRS, + ? ? ? PD11_AOUT_FEC_TX_CLK, + ? ? ? PD12_AOUT_FEC_RXD0, + ? ? ? PD13_AOUT_FEC_RX_DV, + ? ? ? PD14_AOUT_FEC_RX_CLK, + ? ? ? PD15_AOUT_FEC_COL, + ? ? ? PD16_AIN_FEC_TX_ER, + ? ? ? PF23_AIN_FEC_TX_EN, + ? ? ? /* I2C1 */ + ? ? ? PD17_PF_I2C_DATA, + ? ? ? PD18_PF_I2C_CLK, + ? ? ? /* I2C2 */ + ? ? ? PC5_PF_I2C2_SDA, + ? ? ? PC6_PF_I2C2_SCL, + ? ? ? /* FB */ + ? ? ? PA5_PF_LSCLK, + ? ? ? PA6_PF_LD0, + ? ? ? PA7_PF_LD1, + ? ? ? PA8_PF_LD2, + ? ? ? PA9_PF_LD3, + ? ? ? PA10_PF_LD4, + ? ? ? PA11_PF_LD5, + ? ? ? PA12_PF_LD6, + ? ? ? PA13_PF_LD7, + ? ? ? PA14_PF_LD8, + ? ? ? PA15_PF_LD9, + ? ? ? PA16_PF_LD10, + ? ? ? PA17_PF_LD11, + ? ? ? PA18_PF_LD12, + ? ? ? PA19_PF_LD13, + ? ? ? PA20_PF_LD14, + ? ? ? PA21_PF_LD15, + ? ? ? PA22_PF_LD16, + ? ? ? PA23_PF_LD17, + ? ? ? PA25_PF_CLS, + ? ? ? PA27_PF_SPL_SPR, + ? ? ? PA28_PF_HSYNC, + ? ? ? PA29_PF_VSYNC, + ? ? ? PA30_PF_CONTRAST, + ? ? ? PA31_PF_OE_ACD, + ? ? ? /* OWIRE */ + ? ? ? PE16_AF_OWIRE, + ? ? ? /* SDHC1*/ + ? ? ? PE18_PF_SD1_D0, + ? ? ? PE19_PF_SD1_D1, + ? ? ? PE20_PF_SD1_D2, + ? ? ? PE21_PF_SD1_D3, + ? ? ? PE22_PF_SD1_CMD, + ? ? ? PE23_PF_SD1_CLK, + ? ? ? /* SDHC2*/ + ? ? ? PB4_PF_SD2_D0, + ? ? ? PB5_PF_SD2_D1, + ? ? ? PB6_PF_SD2_D2, + ? ? ? PB7_PF_SD2_D3, + ? ? ? PB8_PF_SD2_CMD, + ? ? ? PB9_PF_SD2_CLK, +}; + +static struct mxc_nand_platform_data mxt_td60_nand_board_info = { + ? ? ? .width = 1, + ? ? ? .hw_ecc = 1, +}; + +static struct imxi2c_platform_data mxt_td60_i2c_data = { + ? ? ? .bitrate = 100000, +}; + +static struct i2c_board_info mxt_td60_i2c_devices[] = { +}; + +static struct imxi2c_platform_data mxt_td60_i2c2_data = { + ? ? ? .bitrate = 100000, +}; + +static struct i2c_board_info mxt_td60_i2c2_devices[] = { +}; + +static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? void *data) +{ + ? ? ? return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING, + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "sdhc1-card-detect", data); +} + +static void mxt_td60_sdhc1_exit(struct device *dev, void *data) +{ + ? ? ? free_irq(IRQ_GPIOE(21), data); +} + +static struct imxmmc_platform_data sdhc1_pdata = { + ? ? ? .init = mxt_td60_sdhc1_init, + ? ? ? .exit = mxt_td60_sdhc1_exit, +}; + +static struct platform_device *platform_devices[] __initdata = { + ? ? ? &mxc_fec_device, +}; + +static struct imxuart_platform_data uart_pdata[] = { + ? ? ? { + ? ? ? ? ? ? ? .flags = IMXUART_HAVE_RTSCTS, + ? ? ? }, { + ? ? ? ? ? ? ? .flags = IMXUART_HAVE_RTSCTS, + ? ? ? }, { + ? ? ? ? ? ? ? .flags = IMXUART_HAVE_RTSCTS, + ? ? ? }, { + ? ? ? ? ? ? ? .flags = IMXUART_HAVE_RTSCTS, + ? ? ? }, { + ? ? ? ? ? ? ? .flags = IMXUART_HAVE_RTSCTS, + ? ? ? }, { + ? ? ? ? ? ? ? .flags = IMXUART_HAVE_RTSCTS, + ? ? ? }, +}; + +static void __init mxt_td60_board_init(void) +{ + ? ? ? mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins), + ? ? ? ? ? ? ? ? ? ? ? "mxt_td60"); + + ? ? ? mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); + ? ? ? mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); + ? ? ? mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); + ? ? ? mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); + ? ? ? mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); + ? ? ? mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); + ? ? ? mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info); + + ? ? ? i2c_register_board_info(0, mxt_td60_i2c_devices, + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ARRAY_SIZE(mxt_td60_i2c_devices)); + + ? ? ? i2c_register_board_info(1, mxt_td60_i2c2_devices, + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ARRAY_SIZE(mxt_td60_i2c2_devices)); + + ? ? ? mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data); + ? ? ? mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data); + ? ? ? mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); + + ? ? ? platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mxt_td60_timer_init(void) +{ + ? ? ? mx27_clocks_init(26000000); +} + +static struct sys_timer mxt_td60_timer = { + ? ? ? .init ? = mxt_td60_timer_init, +}; + +MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") + ? ? ? /* maintainer: Maxtrack Industrial */ + ? ? ? .phys_io ? ? ? ?= AIPI_BASE_ADDR, + ? ? ? .io_pg_offst ? ?= ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + ? ? ? .boot_params ? ?= PHYS_OFFSET + 0x100, + ? ? ? .map_io ? ? ? ? = mx27_map_io, + ? ? ? .init_irq ? ? ? = mx27_init_irq, + ? ? ? .init_machine ? = mxt_td60_board_init, + ? ? ? .timer ? ? ? ? ?= &mxt_td60_timer, +MACHINE_END + --1.6.0.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v2 1/1 mx27: Add basic support for Maxtrack i-MXT TD60
Hi Saeed,
Quoted 9 lines · saeed bishara
arch/arm/mach-mx2/mxt_td60.c line 44
Quoted 8 lines
...
arch/arm/mach-mx2/mxt_td60.c new file +7
-0+#include <mach/i2c.h> +#include <mach/imxfb.h> +#include <mach/mmc.h> + +#include "devices.h" + +static unsigned int mxt_td60_pins[] = {shouldn't this be
__initdata?
I think it could be used, but I don't see others MX27 boards using it.
Sascha, what you think?
Regards,
Alan
PATCH v2 1/1 mx27: Add basic support for Maxtrack i-MXT TD60
Quoted 13 lines · Alan Carvalho de Assis
Hi Saeed,
Quoted 9 lines · saeed bishara
arch/arm/mach-mx2/mxt_td60.c line 44
Quoted 8 lines
...
arch/arm/mach-mx2/mxt_td60.c new file +7
-0+#include <mach/i2c.h> +#include <mach/imxfb.h> +#include <mach/mmc.h> + +#include "devices.h" + +static unsigned int mxt_td60_pins[] = {shouldn't this be
__initdata?
Quoted 3 lines
I think it could be used, but I don't see others MX27 boards using it.
Sascha, what you think?
Yes, it should be __initdata
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
PATCH v2 1/1 mx27: Add basic support for Maxtrack i-MXT TD60
In reply to Alan Carvalho de AssisHi Alan,
Quoted 14 lines · Alan Carvalho de Assis
From: Alan Carvalho de Assis <[email protected]>
Subject: [PATCH v2] mx27: Add basic support for Maxtrack i-MXT TD60
To: "linux-arm-kernel" <[email protected]>
Cc: "Sascha Hauer" <[email protected]>, "Russell King - ARM Linux" <[email protected]>, "Daniel Mack" <[email protected]>
Date: Tuesday, November 24, 2009, 4:21 PM
Signed-off-by: Alan Carvalho de Assis
<[email protected]>
---
arch/arm/mach-mx2/Kconfig? ? |? ? 7
++
arch/arm/mach-mx2/Makefile???|? ?
1 +
arch/arm/mach-mx2/mxt_td60.c|? 245
++++++++++++++++++++++++++++++++++++++++++
Quoted 2 lines
3 files changed, 253 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mx2/mxt_td60.c
Don't you need to add entries to include/asm-arm/arch-mxc/debug-macro.S and arch /arm/plat-mxc/include/mach/board-mxt_td60.h like other MX27 based boards?
Regards,
Fabio Estevam
PATCH v2 1/1 mx27: Add basic support for Maxtrack i-MXT TD60
Quoted 21 lines · Fabio Estevam
Hi Alan,
Quoted 14 lines · Alan Carvalho de Assis
From: Alan Carvalho de Assis <[email protected]>
Subject: [PATCH v2] mx27: Add basic support for Maxtrack i-MXT TD60
To: "linux-arm-kernel" <[email protected]>
Cc: "Sascha Hauer" <[email protected]>, "Russell King - ARM Linux" <[email protected]>, "Daniel Mack" <[email protected]>
Date: Tuesday, November 24, 2009, 4:21 PM
Signed-off-by: Alan Carvalho de Assis
<[email protected]>
---
arch/arm/mach-mx2/Kconfig? ? |? ? 7
++
arch/arm/mach-mx2/Makefile???|? ?
1 +
arch/arm/mach-mx2/mxt_td60.c|? 245
++++++++++++++++++++++++++++++++++++++++++Quoted 2 lines
3 files changed, 253 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mx2/mxt_td60.c
Quoted 4 lines
Don't you need to add entries to
include/asm-arm/arch-mxc/debug-macro.Sand arch /arm/plat-mxc/include/mach/board-mxt_td60.h like other MX27 based boards?
There is no board specific code in debug-macro.S any more. board-mxt_td60.h is not needed, too. However, adding the board to uncompress.h might be a good idea to see the "uncompressing Linux" string.
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
PATCH v2 1/1 mx27: Add basic support for Maxtrack i-MXT TD60
In reply to Fabio EstevamHi Fabio,
Quoted 22 lines · Fabio Estevam
Hi Alan,
Quoted 8 lines · Alan Carvalho de Assis
From: Alan Carvalho de Assis <[email protected]>
Subject: [PATCH v2] mx27: Add basic support for Maxtrack i-MXT TD60
To: "linux-arm-kernel" <[email protected]>
Cc: "Sascha Hauer" <[email protected]>, "Russell King - ARM Linux" <[email protected]>, "Daniel Mack" <[email protected]>
Date: Tuesday, November 24, 2009, 4:21 PM
Signed-off-by: Alan Carvalho de Assis
<[email protected]>Quoted 9 lines
--- arch/arm/mach-mx2/Kconfig | 7 ++ arch/arm/mach-mx2/Makefile | 1 + arch/arm/mach-mx2/mxt_td60.c | 245 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 253 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mx2/mxt_td60.c
Quoted 4 lines
Don't you need to add entries to
include/asm-arm/arch-mxc/debug-macro.Sand arch /arm/plat-mxc/include/mach/board-mxt_td60.h like other MX27 based boards?
No, it is not necessary, see:
http://www.spinics.net/lists/arm-kernel/msg72159.html
Best Regards,
Alan