Skip to contentSkip to conversation

selftests/resctrl: Add resctrl selftest

PATCH Superseded Fenghua Yu 4 participants 14 messages Oct 31, 2018 – Nov 21, 2018

Subsystems (2)

v3 of 9 Superseded Latest is v9 →

lore
Share & tools
lore

Fenghua Yu

author
#0 lore raw

v3 cover selftests/resctrl: Add resctrl selftest

With more and more resctrl features are being added by Intel, AMD and ARM, a test tool is becoming more and more useful to validate that both hardware and software functionalities work as expected.

We introduce resctrl selftest to cover resctrl features on both X86 and ARM architectures. It first implements MBM (Memory Bandwidth Monitoring) and MBA (Memory Bandwidth Allocation) tests. We can enhance the selftest tool to include more functionality tests in future.

There is an existing resctrl test suit 'intel_cmt_cat'. But the major purpose of the tool is to test Intel(R) RDT hardware via writing and reading MSR registers. It does access resctrl file system; but the functionalities are very limited. And it doesn't support automatic test and a lot of manual verifications are involved.

So the selftest tool we are introducing here provides a convenient tool which does automatic resctrl testing, is easily available in kernel tree, and will be extended to AMD QoS and ARM MPAM.

The selftest tool is in tools/testing/selftests/resctrl in order to have generic test code for all architectures.

Changelog:
v3:
- Change code based on comments from Babu Moger
- Remove some unnessary code and use pipe to communicate b/w processes

v2:
- Change code based on comments from Babu Moger
- Clean up other places.

Arshiya Hayatkhan Pathan (2):
selftests/resctrl: Add MBM test
selftests/resctrl: Add MBA test

Fenghua Yu (2):
selftests/resctrl: Add README for resctrl tests
selftests/resctrl: Add the test in MAINTAINERS

Sai Praneeth Prakhya (4):
selftests/resctrl: Add basic resctrl file system operations and data selftests/resctrl: Read memory bandwidth from perf IMC counter and
from resctrl file system
selftests/resctrl: Add callback to start a benchmark selftests/resctrl: Add built in benchmark

 MAINTAINERS                                     |   1 +
 tools/testing/selftests/resctrl/Makefile        |  16 +
 tools/testing/selftests/resctrl/README          |  53 ++
 tools/testing/selftests/resctrl/fill_buf.c      | 175 ++++++
 tools/testing/selftests/resctrl/mba_test.c      | 173 ++++++
 tools/testing/selftests/resctrl/mbm_test.c      | 145 +++++
 tools/testing/selftests/resctrl/membw.c         | 705 ++++++++++++++++++++++++
 tools/testing/selftests/resctrl/resctrl.h       |  79 +++
 tools/testing/selftests/resctrl/resctrl_tests.c | 136 +++++
 tools/testing/selftests/resctrl/resctrlfs.c     | 454 +++++++++++++++
 10 files changed, 1937 insertions(+)
 create mode 100644 tools/testing/selftests/resctrl/Makefile
 create mode 100644 tools/testing/selftests/resctrl/README
 create mode 100644 tools/testing/selftests/resctrl/fill_buf.c
 create mode 100644 tools/testing/selftests/resctrl/mba_test.c
 create mode 100644 tools/testing/selftests/resctrl/mbm_test.c
 create mode 100644 tools/testing/selftests/resctrl/membw.c
 create mode 100644 tools/testing/selftests/resctrl/resctrl.h
 create mode 100644 tools/testing/selftests/resctrl/resctrl_tests.c
 create mode 100644 tools/testing/selftests/resctrl/resctrlfs.c
Signature · 1 line
2.5.0
author
#1 lore raw

PATCH v3 1/8 selftests/resctrl: Add README for resctrl tests

resctrl tests will be implemented. README is added for the tool first.

---
 tools/testing/selftests/resctrl/README | 53 ++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 tools/testing/selftests/resctrl/README
tools/testing/selftests/resctrl/README new file +53 -0
new file mode 100644
index 000000000000..09851a619547
@@ -0,0 +1,53 @@
+resctrl_tests - resctrl file system test suit
+
+Authors:
+	Fenghua Yu <[email protected]>
+	Sai Praneeth Prakhya <[email protected]>,
+	Arshiya Hayatkhan Pathan <[email protected]>
+
+resctrl_tests tests various resctrl functionalities and interfaces including
+both software and hardware.
+
+Currently it supports Memory Bandwidth Monitoring test and Memory Bandwidth
+Allocation test on Intel RDT hardware. More tests will be added in the future.
+And the test suit can be extended to cover AMD QoS and ARM MPAM hardware
+as well.
+
+BUILD
+-----
+
+Run "make" to build executable file "resctrl_tests".
+
+RUN
+---
+
+To use resctrl_tests, root or sudoer privileges are required. This is because
+the test needs to mount resctrl file system and change contents in the file
+system.
+
+Executing the test without any parameter will run all supported tests:
+
+	sudo ./resctrl_tests
+
+OVERVIEW OF EXECUTION
+---------------------
+
+A test case has four stages:
+
+  - setup: mount resctrl file system, create group, setup schemata, move test
+    process pids to tasks, start benchmark.
+  - execute: let benchmark run
+  - verify: get resctrl data and verify the data with another source, e.g.
+    perf event.
+  - teardown: umount resctrl and clear temporary files.
+
+ARGUMENTS
+---------
+
+Parameter '-h' shows usage information.
+
+usage: resctrl_tests [-h] [-b benchmark_cmd [options]] [-t test list]
+        -b benchmark_cmd [options]: run specified benchmark
+         default benchmark is builtin fill_buf
+        -t test list: run tests specified in the test list, e.g. -t mbm,mba
+        -h: help
Signature · 1 line
2.5.0
#2 lore raw

Re: [PATCH v3 1/8] selftests/resctrl: Add README for resctrl tests

Quoted 3 lines · Fenghua Yu

resctrl tests will be implemented. README is added for the tool first.

Hi,

Quoted 14 lines
---
 tools/testing/selftests/resctrl/README | 53 ++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 tools/testing/selftests/resctrl/README
tools/testing/selftests/resctrl/README new file +3 -0
new file mode 100644
index 000000000000..09851a619547
@@ -0,0 +1,53 @@
+resctrl_tests - resctrl file system test suit
+
+Authors:

tools/testing/selftests/resctrl/README line 13

Quoted 10 lines
tools/testing/selftests/resctrl/README new file +10 -0
+	Fenghua Yu <[email protected]>
+	Sai Praneeth Prakhya <[email protected]>,
+	Arshiya Hayatkhan Pathan <[email protected]>
+
+resctrl_tests tests various resctrl functionalities and interfaces including
+both software and hardware.
+
+Currently it supports Memory Bandwidth Monitoring test and Memory Bandwidth
+Allocation test on Intel RDT hardware. More tests will be added in the future.
+And the test suit can be extended to cover AMD QoS and ARM MPAM hardware

suite

tools/testing/selftests/resctrl/README line 17

Quoted 4 lines
tools/testing/selftests/resctrl/README new file +4 -0
+as well.
+
+BUILD
+-----

cheers.

Signature · 1 line
~Randy
author
#3 lore raw

PATCH v3 2/8 selftests/resctrl: Add basic resctrl file system operations and data

In reply to Fenghua Yu

From: Sai Praneeth Prakhya <[email protected]>

The basic resctrl file system operations and data are added for future usage by resctrl selftest tool.

---
 tools/testing/selftests/resctrl/Makefile    |  10 +
 tools/testing/selftests/resctrl/resctrl.h   |  47 +++
 tools/testing/selftests/resctrl/resctrlfs.c | 454 ++++++++++++++++++++++++++++
 3 files changed, 511 insertions(+)
 create mode 100644 tools/testing/selftests/resctrl/Makefile
 create mode 100644 tools/testing/selftests/resctrl/resctrl.h
 create mode 100644 tools/testing/selftests/resctrl/resctrlfs.c
tools/testing/selftests/resctrl/Makefile new file +10 -0
new file mode 100644
index 000000000000..bd5c5418961e
@@ -0,0 +1,10 @@
+CC = gcc
+CFLAGS = -g -Wall
+
+*.o: *.c
+	$(CC) $(CFLAGS) -c *.c
+
+.PHONY: clean
+
+clean:
+	$(RM) *.o *~
tools/testing/selftests/resctrl/resctrl.h new file +47 -0

47 lines not on this page · raw message

tools/testing/selftests/resctrl/resctrlfs.c new file +454 -0

454 lines not on this page · raw message

Signature · 1 line
2.5.0
author
#4 lore raw

PATCH v3 3/8 selftests/resctrl: Read memory bandwidth from perf IMC counter and from resctrl file system

In reply to Fenghua Yu

From: Sai Praneeth Prakhya <[email protected]>

Total memory bandwidth can be monitored from perf IMC counter and from resctrl file system. Later the two will be compared to verify the total memory bandwidth read from resctrl is correct.

---
 tools/testing/selftests/resctrl/membw.c | 431 ++++++++++++++++++++++++++++++++
 1 file changed, 431 insertions(+)
 create mode 100644 tools/testing/selftests/resctrl/membw.c
tools/testing/selftests/resctrl/membw.c new file +431 -0
new file mode 100644
index 000000000000..3146cf8b7468
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Memory bandwidth monitoring and allocation library
+ *
+ * Copyright (C) 2018 Intel Corporation
+ *
+ * Authors:
+ *    Arshiya Hayatkhan Pathan <[email protected]>
+ *    Sai Praneeth Prakhya <[email protected]>,
+ *    Fenghua Yu <[email protected]>
+ */
+#include "resctrl.h"
+
+#define UNCORE_IMC		"uncore_imc"
+#define READ_FILE_NAME		"events/cas_count_read"
+#define WRITE_FILE_NAME		"events/cas_count_write"
+#define DYN_PMU_PATH		"/sys/bus/event_source/devices"
+#define SCALE			0.00006103515625
+#define MAX_IMCS		20
+#define MAX_TOKENS		5
+#define READ			0
+#define WRITE			1
+#define CON_MON_MBM_LOCAL_BYTES_PATH				\
+	"%s/%s/mon_groups/%s/mon_data/mon_L3_0%c/mbm_local_bytes"
+
+#define CON_MBM_LOCAL_BYTES_PATH		\
+	"%s/%s/mon_data/mon_L3_0%c/mbm_local_bytes"
+
+#define MON_MBM_LOCAL_BYTES_PATH		\
+	"%s/mon_groups/%s/mon_data/mon_L3_0%c/mbm_local_bytes"
+
+#define MBM_LOCAL_BYTES_PATH			\
+	"%s/mon_data/mon_L3_0%c/mbm_local_bytes"
+
+struct membw_read_format {
+	__u64 value;         /* The value of the event */
+	__u64 time_enabled;  /* if PERF_FORMAT_TOTAL_TIME_ENABLED */
+	__u64 time_running;  /* if PERF_FORMAT_TOTAL_TIME_RUNNING */
+	__u64 id;            /* if PERF_FORMAT_ID */
+};
+
+struct imc_counter_config {
+	__u32 type;
+	__u64 event;
+	__u64 umask;
+	struct perf_event_attr pe;
+	struct membw_read_format return_value;
+	int fd;
+};
+
+static struct imc_counter_config imc_counters_config[MAX_IMCS][2];
+static char mbm_total_path[1024];
+static int imcs;
+
+void membw_initialize_perf_event_attr(int i, int j)
+{
+	memset(&imc_counters_config[i][j].pe, 0,
+	       sizeof(struct perf_event_attr));
+	imc_counters_config[i][j].pe.type = imc_counters_config[i][j].type;
+	imc_counters_config[i][j].pe.size = sizeof(struct perf_event_attr);
+	imc_counters_config[i][j].pe.disabled = 1;
+	imc_counters_config[i][j].pe.inherit = 1;
+	imc_counters_config[i][j].pe.exclude_guest = 1;
+	imc_counters_config[i][j].pe.config =
+		imc_counters_config[i][j].umask << 8 |
+		imc_counters_config[i][j].event;
+	imc_counters_config[i][j].pe.sample_type = PERF_SAMPLE_IDENTIFIER;
+	imc_counters_config[i][j].pe.read_format =
+		PERF_FORMAT_TOTAL_TIME_ENABLED | PERF_FORMAT_TOTAL_TIME_RUNNING;
+}
+
+static int open_perf_event(int i, int cpu_no, int j)
+{
+	imc_counters_config[i][j].fd =
+		perf_event_open(&imc_counters_config[i][j].pe, -1, cpu_no, -1,
+				PERF_FLAG_FD_CLOEXEC);
+
+	if (imc_counters_config[i][j].fd == -1) {
+		fprintf(stderr, "Error opening leader %llx\n",
+			imc_counters_config[i][j].pe.config);
+
+		return -1;
+	}
+
+	return 0;
+}
+
+void membw_ioctl_perf_event_ioc_reset_enable(int i, int j)
+{
+	ioctl(imc_counters_config[i][j].fd, PERF_EVENT_IOC_RESET, 0);
+	ioctl(imc_counters_config[i][j].fd, PERF_EVENT_IOC_ENABLE, 0);
+}
+
+void membw_ioctl_perf_event_ioc_disable(int i, int j)
+{
+	ioctl(imc_counters_config[i][j].fd, PERF_EVENT_IOC_DISABLE, 0);
+}
+
+/*
+ * get_event_and_umask:	Parse config into event and umask
+ * @cas_count_cfg:	Config
+ * @count:		iMC number
+ * @op:			Operation (read/write)
+ */
+void get_event_and_umask(char *cas_count_cfg, int count, bool op)
+{
+	char *token[MAX_TOKENS];
+	int i = 0;
+
+	strcat(cas_count_cfg, ",");
+	token[0] = strtok(cas_count_cfg, "=,");
+
+	for (i = 1; i < MAX_TOKENS; i++)
+		token[i] = strtok(NULL, "=,");
+
+	for (i = 0; i < MAX_TOKENS; i++) {
+		if (!token[i])
+			break;
+		if (strcmp(token[i], "event") == 0) {
+			if (op == READ)
+				imc_counters_config[count][READ].event =
+				strtol(token[i + 1], NULL, 16);
+			else
+				imc_counters_config[count][WRITE].event =
+				strtol(token[i + 1], NULL, 16);
+		}
+		if (strcmp(token[i], "umask") == 0) {
+			if (op == READ)
+				imc_counters_config[count][READ].umask =
+				strtol(token[i + 1], NULL, 16);
+			else
+				imc_counters_config[count][WRITE].umask =
+				strtol(token[i + 1], NULL, 16);
+		}
+	}
+}
+
+/* Get type and config (read and write) of an iMC counter */
+static int read_from_imc_dir(char *imc_dir, int count)
+{
+	char cas_count_cfg[1024], imc_counter_cfg[1024], imc_counter_type[1024];
+	FILE *fp;
+
+	/* Get type of iMC counter */
+	sprintf(imc_counter_type, "%s%s", imc_dir, "type");
+	fp = fopen(imc_counter_type, "r");
+	if (!fp) {
+		perror("Failed to open imc counter type file");
+
+		return -1;
+	}
+	if (fscanf(fp, "%u", &imc_counters_config[count][READ].type) <= 0) {
+		perror("Could not get imc type");
+		fclose(fp);
+
+		return -1;
+	}
+	fclose(fp);
+
+	imc_counters_config[count][WRITE].type =
+				imc_counters_config[count][READ].type;
+
+	/* Get read config */
+	sprintf(imc_counter_cfg, "%s%s", imc_dir, READ_FILE_NAME);
+	fp = fopen(imc_counter_cfg, "r");
+	if (!fp) {
+		perror("Failed to open imc config file");
+
+		return -1;
+	}
+	if (fscanf(fp, "%s", cas_count_cfg) <= 0) {
+		perror("Could not get imc cas count read");
+		fclose(fp);
+
+		return -1;
+	}
+	fclose(fp);
+
+	get_event_and_umask(cas_count_cfg, count, READ);
+
+	/* Get write config */
+	sprintf(imc_counter_cfg, "%s%s", imc_dir, WRITE_FILE_NAME);
+	fp = fopen(imc_counter_cfg, "r");
+	if (!fp) {
+		perror("Failed to open imc config file");
+
+		return -1;
+	}
+	if  (fscanf(fp, "%s", cas_count_cfg) <= 0) {
+		perror("Could not get imc cas count write");
+		fclose(fp);
+
+		return -1;
+	}
+	fclose(fp);
+
+	get_event_and_umask(cas_count_cfg, count, WRITE);
+
+	return 0;
+}
+
+/*
+ * A system can have 'n' number of iMC (Integrated Memory Controller)
+ * counters, get that 'n'. For each iMC counter get it's type and config.
+ * Also, each counter has two configs, one for read and the other for write.
+ * A config again has two parts, event and umask.
+ * Enumerate all these details into an array of structures.
+ *
+ * Return: >= 0 on success. < 0 on failure.
+ */
+static int num_of_imcs(void)
+{
+	unsigned int count = 0;
+	char imc_dir[1024];
+	struct dirent *ep;
+	int ret;
+	DIR *dp;
+
+	dp = opendir(DYN_PMU_PATH);
+	if (dp) {
+		while ((ep = readdir(dp))) {
+			if (strstr(ep->d_name, UNCORE_IMC)) {
+				sprintf(imc_dir, "%s/%s/", DYN_PMU_PATH,
+					ep->d_name);
+				ret = read_from_imc_dir(imc_dir, count);
+				if (ret) {
+					closedir(dp);
+
+					return ret;
+				}
+				count++;
+			}
+		}
+		closedir(dp);
+		if (count == 0) {
+			perror("Unable find iMC counters!\n");
+
+			return -1;
+		}
+	} else {
+		perror("Unable to open PMU directory!\n");
+
+		return -1;
+	}
+
+	return count;
+}
+
+static int initialize_mem_bw_imc(void)
+{
+	int imc, j;
+
+	imcs = num_of_imcs();
+	if (imcs < 0)
+		return imcs;
+
+	/* Initialize perf_event_attr structures for all iMC's */
+	for (imc = 0; imc < imcs; imc++) {
+		for (j = 0; j < 2; j++)
+			membw_initialize_perf_event_attr(imc, j);
+	}
+
+	return 0;
+}
+
+/*
+ * get_mem_bw_imc:	Memory band width as reported by iMC counters
+ * @cpu_no:		CPU number that the benchmark PID is binded to
+ * @bw_report:		Bandwidth report type (reads, writes)
+ *
+ * Memory B/W utilized by a process on a socket can be calculated using
+ * iMC counters. Perf events are used to read these counters.
+ *
+ * Return: >= 0 on success. < 0 on failure.
+ */
+static float get_mem_bw_imc(int cpu_no, char *bw_report)
+{
+	float reads, writes, of_mul_read, of_mul_write;
+	int imc, j, ret;
+
+	/* Start all iMC counters to log values (both read and write) */
+	reads = 0, writes = 0, of_mul_read = 1, of_mul_write = 1;
+	for (imc = 0; imc < imcs; imc++) {
+		for (j = 0; j < 2; j++) {
+			ret = open_perf_event(imc, cpu_no, j);
+			if (ret)
+				return -1;
+		}
+		for (j = 0; j < 2; j++)
+			membw_ioctl_perf_event_ioc_reset_enable(imc, j);
+	}
+
+	sleep(1);
+
+	/* Stop counters after a second to get results (both read and write) */
+	for (imc = 0; imc < imcs; imc++) {
+		for (j = 0; j < 2; j++)
+			membw_ioctl_perf_event_ioc_disable(imc, j);
+	}
+
+	/*
+	 * Get results which are stored in struct type imc_counter_config
+	 * Take over flow into consideration before calculating total b/w
+	 */
+	for (imc = 0; imc < imcs; imc++) {
+		struct imc_counter_config *r =
+			&imc_counters_config[imc][READ];
+		struct imc_counter_config *w =
+			&imc_counters_config[imc][WRITE];
+
+		if (read(r->fd, &r->return_value,
+			 sizeof(struct membw_read_format)) == -1) {
+			perror("Couldn't get read b/w through iMC");
+
+			return -1;
+		}
+
+		if (read(w->fd, &w->return_value,
+			 sizeof(struct membw_read_format)) == -1) {
+			perror("Couldn't get write bw through iMC");
+
+			return -1;
+		}
+
+		__u64 r_time_enabled = r->return_value.time_enabled;
+		__u64 r_time_running = r->return_value.time_running;
+
+		if (r_time_enabled != r_time_running)
+			of_mul_read = (float)r_time_enabled /
+					(float)r_time_running;
+
+		__u64 w_time_enabled = w->return_value.time_enabled;
+		__u64 w_time_running = w->return_value.time_running;
+
+		if (w_time_enabled != w_time_running)
+			of_mul_write = (float)w_time_enabled /
+					(float)w_time_running;
+		reads += r->return_value.value * of_mul_read * SCALE;
+		writes += w->return_value.value * of_mul_write * SCALE;
+	}
+
+	for (imc = 0; imc < imcs; imc++) {
+		close(imc_counters_config[imc][READ].fd);
+		close(imc_counters_config[imc][WRITE].fd);
+	}
+
+	if (strcmp(bw_report, "reads") == 0)
+		return reads;
+
+	if (strcmp(bw_report, "writes") == 0)
+		return writes;
+
+	return (reads + writes);
+}
+
+void set_mbm_path(const char *ctrlgrp, const char *mongrp, char sock_num)
+{
+	if (ctrlgrp && mongrp)
+		sprintf(mbm_total_path, CON_MON_MBM_LOCAL_BYTES_PATH,
+			RESCTRL_PATH, ctrlgrp, mongrp, sock_num);
+	else if (!ctrlgrp && mongrp)
+		sprintf(mbm_total_path, MON_MBM_LOCAL_BYTES_PATH, RESCTRL_PATH,
+			mongrp, sock_num);
+	else if (ctrlgrp && !mongrp)
+		sprintf(mbm_total_path, CON_MBM_LOCAL_BYTES_PATH, RESCTRL_PATH,
+			ctrlgrp, sock_num);
+	else if (!ctrlgrp && !mongrp)
+		sprintf(mbm_total_path, MBM_LOCAL_BYTES_PATH, RESCTRL_PATH,
+			sock_num);
+}
+
+/*
+ * initialize_mem_bw_resctrl:	Appropriately populate "mbm_total_path"
+ * @ctrlgrp:			Name of the control monitor group (con_mon grp)
+ * @mongrp:			Name of the monitor group (mon grp)
+ * @cpu_no:			CPU number that the benchmark PID is binded to
+ * @resctrl_val:		Resctrl feature (Eg: mbm, mba.. etc)
+ */
+static void initialize_mem_bw_resctrl(const char *ctrlgrp, const char *mongrp,
+				      int cpu_no, char *resctrl_val)
+{
+	char sock_num;
+
+	sock_num = get_sock_num(cpu_no);
+	if (sock_num < 0)
+		return;
+
+	if (strcmp(resctrl_val, "mbm") == 0)
+		set_mbm_path(ctrlgrp, mongrp, sock_num);
+
+	if ((strcmp(resctrl_val, "mba") == 0)) {
+		if (ctrlgrp)
+			sprintf(mbm_total_path, CON_MBM_LOCAL_BYTES_PATH,
+				RESCTRL_PATH, ctrlgrp, sock_num);
+		else
+			sprintf(mbm_total_path, MBM_LOCAL_BYTES_PATH,
+				RESCTRL_PATH, sock_num);
+	}
+}
+
+/*
+ * Get MBM Local bytes as reported by resctrl FS
+ * For MBM,
+ * 1. If con_mon grp and mon grp are given, then read from con_mon grp's mon grp
+ * 2. If only con_mon grp is given, then read from con_mon grp
+ * 3. If both are not given, then read from root con_mon grp
+ * For MBA,
+ * 1. If con_mon grp is given, then read from it
+ * 2. If con_mon grp is not given, then read from root con_mon grp
+ */
+static unsigned long get_mem_bw_resctrl(void)
+{
+	unsigned long mbm_total = 0;
+	FILE *fp;
+
+	fp = fopen(mbm_total_path, "r");
+	if (!fp) {
+		perror("Failed to open total bw file");
+
+		return -1;
+	}
+	if (fscanf(fp, "%lu", &mbm_total) <= 0) {
+		perror("Could not get mbm local bytes");
+		fclose(fp);
+
+		return -1;
+	}
+	fclose(fp);
+
+	return mbm_total;
+}
Signature · 1 line
2.5.0
reviewer
#5 lore raw

Re: [PATCH v3 3/8] selftests/resctrl: Read memory bandwidth from perf IMC counter and from resctrl file system

Quoted 264 lines · Fenghua Yu

From: Sai Praneeth Prakhya <[email protected]>

Total memory bandwidth can be monitored from perf IMC counter and from resctrl file system. Later the two will be compared to verify the total memory bandwidth read from resctrl is correct.

---
 tools/testing/selftests/resctrl/membw.c | 431 ++++++++++++++++++++++++++++++++
 1 file changed, 431 insertions(+)
 create mode 100644 tools/testing/selftests/resctrl/membw.c
tools/testing/selftests/resctrl/membw.c new file +244 -0
new file mode 100644
index 000000000000..3146cf8b7468
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Memory bandwidth monitoring and allocation library
+ *
+ * Copyright (C) 2018 Intel Corporation
+ *
+ * Authors:
+ *    Arshiya Hayatkhan Pathan <[email protected]>
+ *    Sai Praneeth Prakhya <[email protected]>,
+ *    Fenghua Yu <[email protected]>
+ */
+#include "resctrl.h"
+
+#define UNCORE_IMC		"uncore_imc"
+#define READ_FILE_NAME		"events/cas_count_read"
+#define WRITE_FILE_NAME		"events/cas_count_write"
+#define DYN_PMU_PATH		"/sys/bus/event_source/devices"
+#define SCALE			0.00006103515625
+#define MAX_IMCS		20
+#define MAX_TOKENS		5
+#define READ			0
+#define WRITE			1
+#define CON_MON_MBM_LOCAL_BYTES_PATH				\
+	"%s/%s/mon_groups/%s/mon_data/mon_L3_0%c/mbm_local_bytes"
+
+#define CON_MBM_LOCAL_BYTES_PATH		\
+	"%s/%s/mon_data/mon_L3_0%c/mbm_local_bytes"
+
+#define MON_MBM_LOCAL_BYTES_PATH		\
+	"%s/mon_groups/%s/mon_data/mon_L3_0%c/mbm_local_bytes"
+
+#define MBM_LOCAL_BYTES_PATH			\
+	"%s/mon_data/mon_L3_0%c/mbm_local_bytes"
+
+struct membw_read_format {
+	__u64 value;         /* The value of the event */
+	__u64 time_enabled;  /* if PERF_FORMAT_TOTAL_TIME_ENABLED */
+	__u64 time_running;  /* if PERF_FORMAT_TOTAL_TIME_RUNNING */
+	__u64 id;            /* if PERF_FORMAT_ID */
+};
+
+struct imc_counter_config {
+	__u32 type;
+	__u64 event;
+	__u64 umask;
+	struct perf_event_attr pe;
+	struct membw_read_format return_value;
+	int fd;
+};
+
+static struct imc_counter_config imc_counters_config[MAX_IMCS][2];
+static char mbm_total_path[1024];
+static int imcs;
+
+void membw_initialize_perf_event_attr(int i, int j)
+{
+	memset(&imc_counters_config[i][j].pe, 0,
+	       sizeof(struct perf_event_attr));
+	imc_counters_config[i][j].pe.type = imc_counters_config[i][j].type;
+	imc_counters_config[i][j].pe.size = sizeof(struct perf_event_attr);
+	imc_counters_config[i][j].pe.disabled = 1;
+	imc_counters_config[i][j].pe.inherit = 1;
+	imc_counters_config[i][j].pe.exclude_guest = 1;
+	imc_counters_config[i][j].pe.config =
+		imc_counters_config[i][j].umask << 8 |
+		imc_counters_config[i][j].event;
+	imc_counters_config[i][j].pe.sample_type = PERF_SAMPLE_IDENTIFIER;
+	imc_counters_config[i][j].pe.read_format =
+		PERF_FORMAT_TOTAL_TIME_ENABLED | PERF_FORMAT_TOTAL_TIME_RUNNING;
+}
+
+static int open_perf_event(int i, int cpu_no, int j)
+{
+	imc_counters_config[i][j].fd =
+		perf_event_open(&imc_counters_config[i][j].pe, -1, cpu_no, -1,
+				PERF_FLAG_FD_CLOEXEC);
+
+	if (imc_counters_config[i][j].fd == -1) {
+		fprintf(stderr, "Error opening leader %llx\n",
+			imc_counters_config[i][j].pe.config);
+
+		return -1;
+	}
+
+	return 0;
+}
+
+void membw_ioctl_perf_event_ioc_reset_enable(int i, int j)
+{
+	ioctl(imc_counters_config[i][j].fd, PERF_EVENT_IOC_RESET, 0);
+	ioctl(imc_counters_config[i][j].fd, PERF_EVENT_IOC_ENABLE, 0);
+}
+
+void membw_ioctl_perf_event_ioc_disable(int i, int j)
+{
+	ioctl(imc_counters_config[i][j].fd, PERF_EVENT_IOC_DISABLE, 0);
+}
+
+/*
+ * get_event_and_umask:	Parse config into event and umask
+ * @cas_count_cfg:	Config
+ * @count:		iMC number
+ * @op:			Operation (read/write)
+ */
+void get_event_and_umask(char *cas_count_cfg, int count, bool op)
+{
+	char *token[MAX_TOKENS];
+	int i = 0;
+
+	strcat(cas_count_cfg, ",");
+	token[0] = strtok(cas_count_cfg, "=,");
+
+	for (i = 1; i < MAX_TOKENS; i++)
+		token[i] = strtok(NULL, "=,");
+
+	for (i = 0; i < MAX_TOKENS; i++) {
+		if (!token[i])
+			break;
+		if (strcmp(token[i], "event") == 0) {
+			if (op == READ)
+				imc_counters_config[count][READ].event =
+				strtol(token[i + 1], NULL, 16);
+			else
+				imc_counters_config[count][WRITE].event =
+				strtol(token[i + 1], NULL, 16);
+		}
+		if (strcmp(token[i], "umask") == 0) {
+			if (op == READ)
+				imc_counters_config[count][READ].umask =
+				strtol(token[i + 1], NULL, 16);
+			else
+				imc_counters_config[count][WRITE].umask =
+				strtol(token[i + 1], NULL, 16);
+		}
+	}
+}
+
+/* Get type and config (read and write) of an iMC counter */
+static int read_from_imc_dir(char *imc_dir, int count)
+{
+	char cas_count_cfg[1024], imc_counter_cfg[1024], imc_counter_type[1024];
+	FILE *fp;
+
+	/* Get type of iMC counter */
+	sprintf(imc_counter_type, "%s%s", imc_dir, "type");
+	fp = fopen(imc_counter_type, "r");
+	if (!fp) {
+		perror("Failed to open imc counter type file");
+
+		return -1;
+	}
+	if (fscanf(fp, "%u", &imc_counters_config[count][READ].type) <= 0) {
+		perror("Could not get imc type");
+		fclose(fp);
+
+		return -1;
+	}
+	fclose(fp);
+
+	imc_counters_config[count][WRITE].type =
+				imc_counters_config[count][READ].type;
+
+	/* Get read config */
+	sprintf(imc_counter_cfg, "%s%s", imc_dir, READ_FILE_NAME);
+	fp = fopen(imc_counter_cfg, "r");
+	if (!fp) {
+		perror("Failed to open imc config file");
+
+		return -1;
+	}
+	if (fscanf(fp, "%s", cas_count_cfg) <= 0) {
+		perror("Could not get imc cas count read");
+		fclose(fp);
+
+		return -1;
+	}
+	fclose(fp);
+
+	get_event_and_umask(cas_count_cfg, count, READ);
+
+	/* Get write config */
+	sprintf(imc_counter_cfg, "%s%s", imc_dir, WRITE_FILE_NAME);
+	fp = fopen(imc_counter_cfg, "r");
+	if (!fp) {
+		perror("Failed to open imc config file");
+
+		return -1;
+	}
+	if  (fscanf(fp, "%s", cas_count_cfg) <= 0) {
+		perror("Could not get imc cas count write");
+		fclose(fp);
+
+		return -1;
+	}
+	fclose(fp);
+
+	get_event_and_umask(cas_count_cfg, count, WRITE);
+
+	return 0;
+}
+
+/*
+ * A system can have 'n' number of iMC (Integrated Memory Controller)
+ * counters, get that 'n'. For each iMC counter get it's type and config.
+ * Also, each counter has two configs, one for read and the other for write.
+ * A config again has two parts, event and umask.
+ * Enumerate all these details into an array of structures.
+ *
+ * Return: >= 0 on success. < 0 on failure.
+ */
+static int num_of_imcs(void)
+{
+	unsigned int count = 0;
+	char imc_dir[1024];
+	struct dirent *ep;
+	int ret;
+	DIR *dp;
+
+	dp = opendir(DYN_PMU_PATH);
+	if (dp) {
+		while ((ep = readdir(dp))) {
+			if (strstr(ep->d_name, UNCORE_IMC)) {
+				sprintf(imc_dir, "%s/%s/", DYN_PMU_PATH,
+					ep->d_name);
+				ret = read_from_imc_dir(imc_dir, count);
+				if (ret) {
+					closedir(dp);
+
+					return ret;
+				}
+				count++;
+			}
+		}
+		closedir(dp);
+		if (count == 0) {
+			perror("Unable find iMC counters!\n");
+
+			return -1;
+		}
+	} else {
+		perror("Unable to open PMU directory!\n");
+
+		return -1;
+	}

tools/testing/selftests/resctrl/membw.c line 254

Quoted 10 lines
tools/testing/selftests/resctrl/membw.c new file +10 -0
+
+	return count;
+}
+
+static int initialize_mem_bw_imc(void)
+{
+	int imc, j;
+
+	imcs = num_of_imcs();
+	if (imcs < 0)

I think this condition should be "<=". Pls check.

Quoted 178 lines
tools/testing/selftests/resctrl/membw.c new file +177 -0
+		return imcs;
+
+	/* Initialize perf_event_attr structures for all iMC's */
+	for (imc = 0; imc < imcs; imc++) {
+		for (j = 0; j < 2; j++)
+			membw_initialize_perf_event_attr(imc, j);
+	}
+
+	return 0;
+}
+
+/*
+ * get_mem_bw_imc:	Memory band width as reported by iMC counters
+ * @cpu_no:		CPU number that the benchmark PID is binded to
+ * @bw_report:		Bandwidth report type (reads, writes)
+ *
+ * Memory B/W utilized by a process on a socket can be calculated using
+ * iMC counters. Perf events are used to read these counters.
+ *
+ * Return: >= 0 on success. < 0 on failure.
+ */
+static float get_mem_bw_imc(int cpu_no, char *bw_report)
+{
+	float reads, writes, of_mul_read, of_mul_write;
+	int imc, j, ret;
+
+	/* Start all iMC counters to log values (both read and write) */
+	reads = 0, writes = 0, of_mul_read = 1, of_mul_write = 1;
+	for (imc = 0; imc < imcs; imc++) {
+		for (j = 0; j < 2; j++) {
+			ret = open_perf_event(imc, cpu_no, j);
+			if (ret)
+				return -1;
+		}
+		for (j = 0; j < 2; j++)
+			membw_ioctl_perf_event_ioc_reset_enable(imc, j);
+	}
+
+	sleep(1);
+
+	/* Stop counters after a second to get results (both read and write) */
+	for (imc = 0; imc < imcs; imc++) {
+		for (j = 0; j < 2; j++)
+			membw_ioctl_perf_event_ioc_disable(imc, j);
+	}
+
+	/*
+	 * Get results which are stored in struct type imc_counter_config
+	 * Take over flow into consideration before calculating total b/w
+	 */
+	for (imc = 0; imc < imcs; imc++) {
+		struct imc_counter_config *r =
+			&imc_counters_config[imc][READ];
+		struct imc_counter_config *w =
+			&imc_counters_config[imc][WRITE];
+
+		if (read(r->fd, &r->return_value,
+			 sizeof(struct membw_read_format)) == -1) {
+			perror("Couldn't get read b/w through iMC");
+
+			return -1;
+		}
+
+		if (read(w->fd, &w->return_value,
+			 sizeof(struct membw_read_format)) == -1) {
+			perror("Couldn't get write bw through iMC");
+
+			return -1;
+		}
+
+		__u64 r_time_enabled = r->return_value.time_enabled;
+		__u64 r_time_running = r->return_value.time_running;
+
+		if (r_time_enabled != r_time_running)
+			of_mul_read = (float)r_time_enabled /
+					(float)r_time_running;
+
+		__u64 w_time_enabled = w->return_value.time_enabled;
+		__u64 w_time_running = w->return_value.time_running;
+
+		if (w_time_enabled != w_time_running)
+			of_mul_write = (float)w_time_enabled /
+					(float)w_time_running;
+		reads += r->return_value.value * of_mul_read * SCALE;
+		writes += w->return_value.value * of_mul_write * SCALE;
+	}
+
+	for (imc = 0; imc < imcs; imc++) {
+		close(imc_counters_config[imc][READ].fd);
+		close(imc_counters_config[imc][WRITE].fd);
+	}
+
+	if (strcmp(bw_report, "reads") == 0)
+		return reads;
+
+	if (strcmp(bw_report, "writes") == 0)
+		return writes;
+
+	return (reads + writes);
+}
+
+void set_mbm_path(const char *ctrlgrp, const char *mongrp, char sock_num)
+{
+	if (ctrlgrp && mongrp)
+		sprintf(mbm_total_path, CON_MON_MBM_LOCAL_BYTES_PATH,
+			RESCTRL_PATH, ctrlgrp, mongrp, sock_num);
+	else if (!ctrlgrp && mongrp)
+		sprintf(mbm_total_path, MON_MBM_LOCAL_BYTES_PATH, RESCTRL_PATH,
+			mongrp, sock_num);
+	else if (ctrlgrp && !mongrp)
+		sprintf(mbm_total_path, CON_MBM_LOCAL_BYTES_PATH, RESCTRL_PATH,
+			ctrlgrp, sock_num);
+	else if (!ctrlgrp && !mongrp)
+		sprintf(mbm_total_path, MBM_LOCAL_BYTES_PATH, RESCTRL_PATH,
+			sock_num);
+}
+
+/*
+ * initialize_mem_bw_resctrl:	Appropriately populate "mbm_total_path"
+ * @ctrlgrp:			Name of the control monitor group (con_mon grp)
+ * @mongrp:			Name of the monitor group (mon grp)
+ * @cpu_no:			CPU number that the benchmark PID is binded to
+ * @resctrl_val:		Resctrl feature (Eg: mbm, mba.. etc)
+ */
+static void initialize_mem_bw_resctrl(const char *ctrlgrp, const char *mongrp,
+				      int cpu_no, char *resctrl_val)
+{
+	char sock_num;
+
+	sock_num = get_sock_num(cpu_no);
+	if (sock_num < 0)
+		return;
+
+	if (strcmp(resctrl_val, "mbm") == 0)
+		set_mbm_path(ctrlgrp, mongrp, sock_num);
+
+	if ((strcmp(resctrl_val, "mba") == 0)) {
+		if (ctrlgrp)
+			sprintf(mbm_total_path, CON_MBM_LOCAL_BYTES_PATH,
+				RESCTRL_PATH, ctrlgrp, sock_num);
+		else
+			sprintf(mbm_total_path, MBM_LOCAL_BYTES_PATH,
+				RESCTRL_PATH, sock_num);
+	}
+}
+
+/*
+ * Get MBM Local bytes as reported by resctrl FS
+ * For MBM,
+ * 1. If con_mon grp and mon grp are given, then read from con_mon grp's mon grp
+ * 2. If only con_mon grp is given, then read from con_mon grp
+ * 3. If both are not given, then read from root con_mon grp
+ * For MBA,
+ * 1. If con_mon grp is given, then read from it
+ * 2. If con_mon grp is not given, then read from root con_mon grp
+ */
+static unsigned long get_mem_bw_resctrl(void)
+{
+	unsigned long mbm_total = 0;
+	FILE *fp;
+
+	fp = fopen(mbm_total_path, "r");
+	if (!fp) {
+		perror("Failed to open total bw file");
+
+		return -1;
+	}
+	if (fscanf(fp, "%lu", &mbm_total) <= 0) {
+		perror("Could not get mbm local bytes");
+		fclose(fp);
+
+		return -1;
+	}
+	fclose(fp);
+
+	return mbm_total;
+}
#6 lore raw

RE: [PATCH v3 3/8] selftests/resctrl: Read memory bandwidth from perf IMC counter and from resctrl file system

Quoted 8 lines

tools/testing/selftests/resctrl/membw.c line 254

Quoted 6 lines
tools/testing/selftests/resctrl/membw.c new file +6 -0
+static int initialize_mem_bw_imc(void)
+{
+	int imc, j;
+
+	imcs = num_of_imcs();
+	if (imcs < 0)

I think this condition should be "<=". Pls check.

Thank you for pointing it out. It makes sense to change it to "<=". Will fix it in next version.

Quoted 10 lines

tools/testing/selftests/resctrl/membw.c line 264

Quoted 10 lines
tools/testing/selftests/resctrl/membw.c new file +10 -0
+		return imcs;
+
+	/* Initialize perf_event_attr structures for all iMC's */
+	for (imc = 0; imc < imcs; imc++) {
+		for (j = 0; j < 2; j++)
+			membw_initialize_perf_event_attr(imc, j);
+	}
+
+	return 0;
+}

Thanks and Regards,
Arshiya

author
#7 lore raw

PATCH v3 4/8 selftests/resctrl: Add callback to start a benchmark

In reply to Fenghua Yu

From: Sai Praneeth Prakhya <[email protected]>

The callback starts a child process and puts the child pid in created resctrl group with specified memory bandwidth in schemata. The child starts running benchmark.

---
 tools/testing/selftests/resctrl/membw.c   | 272 ++++++++++++++++++++++++++++++
 tools/testing/selftests/resctrl/resctrl.h |  27 +++
 2 files changed, 299 insertions(+)
tools/testing/selftests/resctrl/membw.c +272 -0
index 3146cf8b7468..75a20de0ff71 100644
@@ -11,6 +11,7 @@
  */
 #include "resctrl.h"
 
+#define MB			(1024 * 1024)
 #define UNCORE_IMC		"uncore_imc"
 #define READ_FILE_NAME		"events/cas_count_read"
 #define WRITE_FILE_NAME		"events/cas_count_write"
@@ -429,3 +430,274 @@ static unsigned long get_mem_bw_resctrl(void)
 
 	return mbm_total;
 }
+
+pid_t bm_pid, ppid;
+
+static void ctrlc_handler(int signum, siginfo_t *info, void *ptr)
+{
+	kill(bm_pid, SIGKILL);
+	printf("Ending\n\n");
+
+	exit(EXIT_SUCCESS);
+}
+
+/*
+ * print_results_bw:	the memory bandwidth results are stored in a file
+ * @filename:		file that stores the results
+ * @bm_pid:		child pid that runs benchmark
+ * @bw_imc:		perf imc counter value
+ * @bw_resc:		memory bandwidth value
+ *
+ * Return:		0 on success. non-zero on failure.
+ */
+static int print_results_bw(char *filename,  int bm_pid, float bw_imc,
+			    unsigned long bw_resc)
+{
+	unsigned long diff = labs(bw_imc - bw_resc);
+	FILE *fp;
+
+	if (strcmp(filename, "stdio") == 0 || strcmp(filename, "stderr") == 0) {
+		printf("Pid: %d \t Mem_BW_iMC: %f \t ", bm_pid, bw_imc);
+		printf("Mem_BW_resc: %lu \t Difference: %lu\n", bw_resc, diff);
+	} else {
+		fp = fopen(filename, "a");
+		if (!fp) {
+			perror("Cannot open results file");
+
+			return errno;
+		}
+		if (fprintf(fp, "Pid: %d \t Mem_BW_iMC: %f \t Mem_BW_resc: %lu \t Difference: %lu\n",
+			    bm_pid, bw_imc, bw_resc, diff) <= 0) {
+			fclose(fp);
+			perror("Could not log results.");
+
+			return errno;
+		}
+		fclose(fp);
+	}
+
+	return 0;
+}
+
+static int
+measure_vals(struct resctrl_val_param *param, unsigned long *bw_resc_start)
+{
+	unsigned long bw_imc, bw_resc, bw_resc_end;
+	int ret;
+
+	/*
+	 * Measure memory bandwidth from resctrl and from
+	 * another source which is perf imc value or could
+	 * be something else if perf imc event is not available.
+	 * Compare the two values to validate resctrl value.
+	 * It takes 1sec to measure the data.
+	 */
+	bw_imc = get_mem_bw_imc(param->cpu_no, param->bw_report);
+	if (bw_imc < 0)
+		return bw_imc;
+
+	bw_resc_end = get_mem_bw_resctrl();
+	if (bw_resc_end < 0)
+		return bw_resc_end;
+
+	bw_resc = (bw_resc_end - *bw_resc_start) / MB;
+	ret = print_results_bw(param->filename, bm_pid, bw_imc, bw_resc);
+	if (ret)
+		return ret;
+
+	*bw_resc_start = bw_resc_end;
+
+	return 0;
+}
+
+/*
+ * membw_val:		execute benchmark and measure memory bandwidth on
+ *			the benchmark
+ * @benchmark_cmd:	benchmark command and its arguments
+ * @param:		parameters passed to membw_val()
+ *
+ * Return:		0 on success. non-zero on failure.
+ */
+int membw_val(char **benchmark_cmd, struct resctrl_val_param *param)
+{
+	int ret = 0, pipefd[2], pipe_message = 0;
+	char *resctrl_val = param->resctrl_val;
+	unsigned long bw_resc_start = 0;
+	struct sigaction sigact;
+	union sigval value;
+	FILE *fp;
+
+	if (strcmp(param->filename, "") == 0)
+		sprintf(param->filename, "stdio");
+
+	if (strcmp(param->bw_report, "") == 0)
+		param->bw_report = "total";
+
+	ret = validate_resctrl_feature_request(resctrl_val);
+	if (ret)
+		return ret;
+
+	if ((strcmp(resctrl_val, "mba")) == 0 ||
+	    (strcmp(resctrl_val, "mbm")) == 0) {
+		ret = validate_bw_report_request(param->bw_report);
+		if (ret)
+			return ret;
+	}
+
+	ret = remount_resctrlfs(param->mum_resctrlfs);
+	if (ret)
+		return ret;
+
+	/*
+	 * If benchmark wasn't successfully started by child, then child should
+	 * kill parent, so save parent's pid
+	 */
+	ppid = getpid();
+
+	/* File based synchronization between parent and child */
+	fp = fopen("sig", "w");
+	if (!fp) {
+		perror("Failed to open sig file");
+
+		return -1;
+	}
+	if (fprintf(fp, "%d\n", 0) <= 0) {
+		perror("Unable to establish sync bw parent & child");
+		fclose(fp);
+
+		return -1;
+	}
+	fclose(fp);
+
+	if (pipe(pipefd)) {
+		perror("Unable to create pipe");
+
+		return -1;
+	}
+
+	/*
+	 * Fork to start benchmark, save child's pid so that it can be killed
+	 * when needed
+	 */
+	bm_pid = fork();
+	if (bm_pid == -1) {
+		perror("Unable to fork");
+
+		return -1;
+	}
+
+	if (bm_pid == 0) {
+		/*
+		 * Mask all signals except SIGUSR1, parent uses SIGUSR1 to
+		 * start benchmark
+		 */
+		sigfillset(&sigact.sa_mask);
+		sigdelset(&sigact.sa_mask, SIGUSR1);
+
+		sigact.sa_sigaction = run_benchmark;
+		sigact.sa_flags = SA_SIGINFO;
+
+		/* Register for "SIGUSR1" signal from parent */
+		if (sigaction(SIGUSR1, &sigact, NULL))
+			PARENT_EXIT("Can't register child for signal");
+
+		/* Tell parent that child is ready */
+		close(pipefd[0]);
+		pipe_message = 1;
+		write(pipefd[1], &pipe_message, sizeof(pipe_message));
+		close(pipefd[1]);
+
+		/* Suspend child until delivery of "SIGUSR1" from parent */
+		sigsuspend(&sigact.sa_mask);
+
+		PARENT_EXIT("Child is done");
+	}
+
+	printf("Benchmark PID: %d\n", bm_pid);
+
+	/*
+	 * Register CTRL-C handler for parent, as it has to kill benchmark
+	 * before exiting
+	 */
+	sigact.sa_sigaction = ctrlc_handler;
+	sigemptyset(&sigact.sa_mask);
+	sigact.sa_flags = SA_SIGINFO;
+	if (sigaction(SIGINT, &sigact, NULL) ||
+	    sigaction(SIGHUP, &sigact, NULL)) {
+		perror("Can't register parent for CTRL-C handler");
+		ret = errno;
+		goto out;
+	}
+
+	value.sival_ptr = benchmark_cmd;
+
+	/* Taskset benchmark to specified cpu */
+	ret = taskset_benchmark(bm_pid, param->cpu_no);
+	if (ret)
+		goto out;
+
+	/* Write benchmark to specified control&monitoring grp in resctrl FS */
+	ret = write_bm_pid_to_resctrl(bm_pid, param->ctrlgrp, param->mongrp,
+				      resctrl_val);
+	if (ret)
+		goto out;
+
+	if ((strcmp(resctrl_val, "mbm") == 0) ||
+	    (strcmp(resctrl_val, "mba") == 0)) {
+		ret = initialize_mem_bw_imc();
+		if (ret)
+			goto out;
+
+		initialize_mem_bw_resctrl(param->ctrlgrp, param->mongrp,
+					  param->cpu_no, resctrl_val);
+	}
+
+	/* Parent waits for child to be ready. */
+	close(pipefd[1]);
+	while (pipe_message != 1)
+		read(pipefd[0], &pipe_message, sizeof(pipe_message));
+	close(pipefd[0]);
+
+	/* Signal child to start benchmark */
+	if (sigqueue(bm_pid, SIGUSR1, value) == -1) {
+		perror("Unable to signal child to start execution");
+		ret = errno;
+		goto out;
+	}
+
+	/* Give benchmark enough time to fully run */
+	sleep(1);
+
+	/* Test runs until the callback setup() tells the test to stop. */
+	while (1) {
+		if (strcmp(resctrl_val, "mbm") == 0) {
+			ret = param->setup(1, param);
+			if (ret) {
+				ret = 0;
+				break;
+			}
+
+			ret = measure_vals(param, &bw_resc_start);
+			if (ret)
+				break;
+		} else if ((strcmp(resctrl_val, "mba") == 0)) {
+			ret = param->setup(1, param);
+			if (ret) {
+				ret = 0;
+				break;
+			}
+
+			ret = measure_vals(param, &bw_resc_start);
+			if (ret)
+				break;
+		} else {
+			break;
+		}
+	}
+
+out:
+	kill(bm_pid, SIGKILL);
+	umount_resctrlfs();
+
+	return ret;
+}
tools/testing/selftests/resctrl/resctrl.h +27 -0
index 01822f6258af..9820af253d4d 100644
@@ -3,6 +3,7 @@
 #ifndef RESCTRL_H
 #define RESCTRL_H
 #include <stdio.h>
+#include <stdarg.h>
 #include <errno.h>
 #include <sched.h>
 #include <stdlib.h>
@@ -28,9 +29,34 @@
 		exit(EXIT_FAILURE);		\
 	} while (0)
 
+/*
+ * resctrl_val_param:	resctrl test parameters
+ * @resctrl_val:	Resctrl feature (Eg: mbm, mba.. etc)
+ * @ctrlgrp:		Name of the control monitor group (con_mon grp)
+ * @mongrp:		Name of the monitor group (mon grp)
+ * @cpu_no:		CPU number to which the benchmark would be binded
+ * @span:		Memory bytes accessed in each benchmark iteration
+ * @mum_resctrlfs:	Should the resctrl FS be remounted?
+ * @filename:		Name of file to which the o/p should be written
+ * @bw_report:		Bandwidth report type (reads vs writes)
+ * @setup:		Call back function to setup test environment
+ */
+struct resctrl_val_param {
+	char	*resctrl_val;
+	char	ctrlgrp[64];
+	char	mongrp[64];
+	int	cpu_no;
+	int	span;
+	int	mum_resctrlfs;
+	char	filename[64];
+	char	*bw_report;
+	int	(*setup)(int num, ...);
+};
+
 pid_t bm_pid, ppid;
 
 int remount_resctrlfs(bool mum_resctrlfs);
+int umount_resctrlfs(void);
 char get_sock_num(int cpu_no);
 int validate_bw_report_request(char *bw_report);
 int validate_resctrl_feature_request(char *resctrl_val);
@@ -43,5 +69,6 @@ int write_bm_pid_to_resctrl(pid_t bm_pid, char *ctrlgrp, char *mongrp,
 int perf_event_open(struct perf_event_attr *hw_event, pid_t pid, int cpu,
 		    int group_fd, unsigned long flags);
 int run_fill_buf(int span, int malloc_and_init_memory, int memflush, int op);
+int membw_val(char **benchmark_cmd, struct resctrl_val_param *param);
 
 #endif /* RESCTRL_H */
Signature · 1 line
2.5.0
reviewer
#8 lore raw

Re: [PATCH v3 4/8] selftests/resctrl: Add callback to start a benchmark

Quoted 84 lines · Fenghua Yu

From: Sai Praneeth Prakhya <[email protected]>

The callback starts a child process and puts the child pid in created resctrl group with specified memory bandwidth in schemata. The child starts running benchmark.

---
 tools/testing/selftests/resctrl/membw.c   | 272 ++++++++++++++++++++++++++++++
 tools/testing/selftests/resctrl/resctrl.h |  27 +++
 2 files changed, 299 insertions(+)
tools/testing/selftests/resctrl/membw.c +55 -0
index 3146cf8b7468..75a20de0ff71 100644
@@ -11,6 +11,7 @@
  */
 #include "resctrl.h"
 
+#define MB			(1024 * 1024)
 #define UNCORE_IMC		"uncore_imc"
 #define READ_FILE_NAME		"events/cas_count_read"
 #define WRITE_FILE_NAME		"events/cas_count_write"
@@ -429,3 +430,274 @@ static unsigned long get_mem_bw_resctrl(void)
 
 	return mbm_total;
 }
+
+pid_t bm_pid, ppid;
+
+static void ctrlc_handler(int signum, siginfo_t *info, void *ptr)
+{
+	kill(bm_pid, SIGKILL);
+	printf("Ending\n\n");
+
+	exit(EXIT_SUCCESS);
+}
+
+/*
+ * print_results_bw:	the memory bandwidth results are stored in a file
+ * @filename:		file that stores the results
+ * @bm_pid:		child pid that runs benchmark
+ * @bw_imc:		perf imc counter value
+ * @bw_resc:		memory bandwidth value
+ *
+ * Return:		0 on success. non-zero on failure.
+ */
+static int print_results_bw(char *filename,  int bm_pid, float bw_imc,
+			    unsigned long bw_resc)
+{
+	unsigned long diff = labs(bw_imc - bw_resc);
+	FILE *fp;
+
+	if (strcmp(filename, "stdio") == 0 || strcmp(filename, "stderr") == 0) {
+		printf("Pid: %d \t Mem_BW_iMC: %f \t ", bm_pid, bw_imc);
+		printf("Mem_BW_resc: %lu \t Difference: %lu\n", bw_resc, diff);
+	} else {
+		fp = fopen(filename, "a");
+		if (!fp) {
+			perror("Cannot open results file");
+
+			return errno;
+		}
+		if (fprintf(fp, "Pid: %d \t Mem_BW_iMC: %f \t Mem_BW_resc: %lu \t Difference: %lu\n",
+			    bm_pid, bw_imc, bw_resc, diff) <= 0) {
+			fclose(fp);
+			perror("Could not log results.");
+
+			return errno;
+		}
+		fclose(fp);
+	}
+
+	return 0;
+}
+
+static int
+measure_vals(struct resctrl_val_param *param, unsigned long *bw_resc_start)
+{
+	unsigned long bw_imc, bw_resc, bw_resc_end;
+	int ret;

tools/testing/selftests/resctrl/membw.c static unsigned long get_mem_bw_resctrl(void) · line 496

Quoted 10 lines
tools/testing/selftests/resctrl/membw.c +10 -0
+
+	/*
+	 * Measure memory bandwidth from resctrl and from
+	 * another source which is perf imc value or could
+	 * be something else if perf imc event is not available.
+	 * Compare the two values to validate resctrl value.
+	 * It takes 1sec to measure the data.
+	 */
+	bw_imc = get_mem_bw_imc(param->cpu_no, param->bw_report);
+	if (bw_imc < 0)

I think this condition should be "<=". If the value is zero, it should exit.

tools/testing/selftests/resctrl/membw.c static unsigned long get_mem_bw_resctrl(void) · line 500

Quoted 4 lines
tools/testing/selftests/resctrl/membw.c +4 -0
+		return bw_imc;
+
+	bw_resc_end = get_mem_bw_resctrl();
+	if (bw_resc_end < 0)

I am not very sure about this. Please check if it should be "<=" 0.

Quoted 258 lines
tools/testing/selftests/resctrl/membw.c +203 -0
+		return bw_resc_end;
+
+	bw_resc = (bw_resc_end - *bw_resc_start) / MB;
+	ret = print_results_bw(param->filename, bm_pid, bw_imc, bw_resc);
+	if (ret)
+		return ret;
+
+	*bw_resc_start = bw_resc_end;
+
+	return 0;
+}
+
+/*
+ * membw_val:		execute benchmark and measure memory bandwidth on
+ *			the benchmark
+ * @benchmark_cmd:	benchmark command and its arguments
+ * @param:		parameters passed to membw_val()
+ *
+ * Return:		0 on success. non-zero on failure.
+ */
+int membw_val(char **benchmark_cmd, struct resctrl_val_param *param)
+{
+	int ret = 0, pipefd[2], pipe_message = 0;
+	char *resctrl_val = param->resctrl_val;
+	unsigned long bw_resc_start = 0;
+	struct sigaction sigact;
+	union sigval value;
+	FILE *fp;
+
+	if (strcmp(param->filename, "") == 0)
+		sprintf(param->filename, "stdio");
+
+	if (strcmp(param->bw_report, "") == 0)
+		param->bw_report = "total";
+
+	ret = validate_resctrl_feature_request(resctrl_val);
+	if (ret)
+		return ret;
+
+	if ((strcmp(resctrl_val, "mba")) == 0 ||
+	    (strcmp(resctrl_val, "mbm")) == 0) {
+		ret = validate_bw_report_request(param->bw_report);
+		if (ret)
+			return ret;
+	}
+
+	ret = remount_resctrlfs(param->mum_resctrlfs);
+	if (ret)
+		return ret;
+
+	/*
+	 * If benchmark wasn't successfully started by child, then child should
+	 * kill parent, so save parent's pid
+	 */
+	ppid = getpid();
+
+	/* File based synchronization between parent and child */
+	fp = fopen("sig", "w");
+	if (!fp) {
+		perror("Failed to open sig file");
+
+		return -1;
+	}
+	if (fprintf(fp, "%d\n", 0) <= 0) {
+		perror("Unable to establish sync bw parent & child");
+		fclose(fp);
+
+		return -1;
+	}
+	fclose(fp);
+
+	if (pipe(pipefd)) {
+		perror("Unable to create pipe");
+
+		return -1;
+	}
+
+	/*
+	 * Fork to start benchmark, save child's pid so that it can be killed
+	 * when needed
+	 */
+	bm_pid = fork();
+	if (bm_pid == -1) {
+		perror("Unable to fork");
+
+		return -1;
+	}
+
+	if (bm_pid == 0) {
+		/*
+		 * Mask all signals except SIGUSR1, parent uses SIGUSR1 to
+		 * start benchmark
+		 */
+		sigfillset(&sigact.sa_mask);
+		sigdelset(&sigact.sa_mask, SIGUSR1);
+
+		sigact.sa_sigaction = run_benchmark;
+		sigact.sa_flags = SA_SIGINFO;
+
+		/* Register for "SIGUSR1" signal from parent */
+		if (sigaction(SIGUSR1, &sigact, NULL))
+			PARENT_EXIT("Can't register child for signal");
+
+		/* Tell parent that child is ready */
+		close(pipefd[0]);
+		pipe_message = 1;
+		write(pipefd[1], &pipe_message, sizeof(pipe_message));
+		close(pipefd[1]);
+
+		/* Suspend child until delivery of "SIGUSR1" from parent */
+		sigsuspend(&sigact.sa_mask);
+
+		PARENT_EXIT("Child is done");
+	}
+
+	printf("Benchmark PID: %d\n", bm_pid);
+
+	/*
+	 * Register CTRL-C handler for parent, as it has to kill benchmark
+	 * before exiting
+	 */
+	sigact.sa_sigaction = ctrlc_handler;
+	sigemptyset(&sigact.sa_mask);
+	sigact.sa_flags = SA_SIGINFO;
+	if (sigaction(SIGINT, &sigact, NULL) ||
+	    sigaction(SIGHUP, &sigact, NULL)) {
+		perror("Can't register parent for CTRL-C handler");
+		ret = errno;
+		goto out;
+	}
+
+	value.sival_ptr = benchmark_cmd;
+
+	/* Taskset benchmark to specified cpu */
+	ret = taskset_benchmark(bm_pid, param->cpu_no);
+	if (ret)
+		goto out;
+
+	/* Write benchmark to specified control&monitoring grp in resctrl FS */
+	ret = write_bm_pid_to_resctrl(bm_pid, param->ctrlgrp, param->mongrp,
+				      resctrl_val);
+	if (ret)
+		goto out;
+
+	if ((strcmp(resctrl_val, "mbm") == 0) ||
+	    (strcmp(resctrl_val, "mba") == 0)) {
+		ret = initialize_mem_bw_imc();
+		if (ret)
+			goto out;
+
+		initialize_mem_bw_resctrl(param->ctrlgrp, param->mongrp,
+					  param->cpu_no, resctrl_val);
+	}
+
+	/* Parent waits for child to be ready. */
+	close(pipefd[1]);
+	while (pipe_message != 1)
+		read(pipefd[0], &pipe_message, sizeof(pipe_message));
+	close(pipefd[0]);
+
+	/* Signal child to start benchmark */
+	if (sigqueue(bm_pid, SIGUSR1, value) == -1) {
+		perror("Unable to signal child to start execution");
+		ret = errno;
+		goto out;
+	}
+
+	/* Give benchmark enough time to fully run */
+	sleep(1);
+
+	/* Test runs until the callback setup() tells the test to stop. */
+	while (1) {
+		if (strcmp(resctrl_val, "mbm") == 0) {
+			ret = param->setup(1, param);
+			if (ret) {
+				ret = 0;
+				break;
+			}
+
+			ret = measure_vals(param, &bw_resc_start);
+			if (ret)
+				break;
+		} else if ((strcmp(resctrl_val, "mba") == 0)) {
+			ret = param->setup(1, param);
+			if (ret) {
+				ret = 0;
+				break;
+			}
+
+			ret = measure_vals(param, &bw_resc_start);
+			if (ret)
+				break;
+		} else {
+			break;
+		}
+	}
+
+out:
+	kill(bm_pid, SIGKILL);
+	umount_resctrlfs();
+
+	return ret;
+}
tools/testing/selftests/resctrl/resctrl.h +27 -0
index 01822f6258af..9820af253d4d 100644
@@ -3,6 +3,7 @@
 #ifndef RESCTRL_H
 #define RESCTRL_H
 #include <stdio.h>
+#include <stdarg.h>
 #include <errno.h>
 #include <sched.h>
 #include <stdlib.h>
@@ -28,9 +29,34 @@
 		exit(EXIT_FAILURE);		\
 	} while (0)
 
+/*
+ * resctrl_val_param:	resctrl test parameters
+ * @resctrl_val:	Resctrl feature (Eg: mbm, mba.. etc)
+ * @ctrlgrp:		Name of the control monitor group (con_mon grp)
+ * @mongrp:		Name of the monitor group (mon grp)
+ * @cpu_no:		CPU number to which the benchmark would be binded
+ * @span:		Memory bytes accessed in each benchmark iteration
+ * @mum_resctrlfs:	Should the resctrl FS be remounted?
+ * @filename:		Name of file to which the o/p should be written
+ * @bw_report:		Bandwidth report type (reads vs writes)
+ * @setup:		Call back function to setup test environment
+ */
+struct resctrl_val_param {
+	char	*resctrl_val;
+	char	ctrlgrp[64];
+	char	mongrp[64];
+	int	cpu_no;
+	int	span;
+	int	mum_resctrlfs;
+	char	filename[64];
+	char	*bw_report;
+	int	(*setup)(int num, ...);
+};
+
 pid_t bm_pid, ppid;
 
 int remount_resctrlfs(bool mum_resctrlfs);
+int umount_resctrlfs(void);
 char get_sock_num(int cpu_no);
 int validate_bw_report_request(char *bw_report);
 int validate_resctrl_feature_request(char *resctrl_val);
@@ -43,5 +69,6 @@ int write_bm_pid_to_resctrl(pid_t bm_pid, char *ctrlgrp, char *mongrp,
 int perf_event_open(struct perf_event_attr *hw_event, pid_t pid, int cpu,
 		    int group_fd, unsigned long flags);
 int run_fill_buf(int span, int malloc_and_init_memory, int memflush, int op);
+int membw_val(char **benchmark_cmd, struct resctrl_val_param *param);
 
 #endif /* RESCTRL_H */
#9 lore raw

RE: [PATCH v3 4/8] selftests/resctrl: Add callback to start a benchmark

Quoted 9 lines
Quoted 9 lines
tools/testing/selftests/resctrl/membw.c +9 -0
+static int
+measure_vals(struct resctrl_val_param *param, unsigned long
+*bw_resc_start) {
+	unsigned long bw_imc, bw_resc, bw_resc_end;
+	int ret;
+
+	/*
+	 * Measure memory bandwidth from resctrl and from
+	 * another source which is perf imc value or could
Quoted 8 lines

tools/testing/selftests/resctrl/membw.c static unsigned long get_mem_bw_resctrl(void) · line 496

Quoted 6 lines
tools/testing/selftests/resctrl/membw.c +6 -0
+	 * be something else if perf imc event is not available.
+	 * Compare the two values to validate resctrl value.
+	 * It takes 1sec to measure the data.
+	 */
+	bw_imc = get_mem_bw_imc(param->cpu_no, param->bw_report);
+	if (bw_imc < 0)

I think this condition should be "<=". If the value is zero, it should exit.

Yes, it should be changed. Will fix it in next version.

Quoted 7 lines

tools/testing/selftests/resctrl/membw.c static unsigned long get_mem_bw_resctrl(void) · line 500

Quoted 5 lines
tools/testing/selftests/resctrl/membw.c +4 -0
+		return bw_imc;
+
+	bw_resc_end = get_mem_bw_resctrl();
+	if (bw_resc_end < 0)

I am not very sure about this. Please check if it should be "<=" 0.

This one should also be changed. Will fix it too.

Quoted 12 lines

tools/testing/selftests/resctrl/membw.c static unsigned long get_mem_bw_resctrl(void) · line 511

Quoted 12 lines
tools/testing/selftests/resctrl/membw.c +11 -0
+		return bw_resc_end;
+
+	bw_resc = (bw_resc_end - *bw_resc_start) / MB;
+	ret = print_results_bw(param->filename, bm_pid, bw_imc, bw_resc);
+	if (ret)
+		return ret;
+
+	*bw_resc_start = bw_resc_end;
+
+	return 0;
+}

Thanks and Regards,
Arshiya

author
#10 lore raw

PATCH v3 5/8 selftests/resctrl: Add built in benchmark

In reply to Fenghua Yu

From: Sai Praneeth Prakhya <[email protected]>

Built-in benchmark fill_buf generates stressful memory bandwidth and cache traffic.

Later it will be used as a default benchmark by various resctrl tests such as MBA (Memory Bandwidth Allocation) and MBM (Memory Bandwidth Monitoring) tests.

---
 tools/testing/selftests/resctrl/fill_buf.c | 175 +++++++++++++++++++++++++++++
 1 file changed, 175 insertions(+)
 create mode 100644 tools/testing/selftests/resctrl/fill_buf.c
tools/testing/selftests/resctrl/fill_buf.c new file +175 -0
new file mode 100644
index 000000000000..d9950b5d068d
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * fill_buf benchmark
+ *
+ * Copyright (C) 2018 Intel Corporation
+ *
+ * Authors:
+ *    Arshiya Hayatkhan Pathan <[email protected]>
+ *    Sai Praneeth Prakhya <[email protected]>,
+ *    Fenghua Yu <[email protected]>
+ */
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <inttypes.h>
+#include <malloc.h>
+#include <string.h>
+
+#include "resctrl.h"
+
+#define CL_SIZE			(64)
+#define PAGE_SIZE		(4 * 1024)
+#define MB			(1024 * 1024)
+
+static unsigned char *startptr;
+
+static void sb(void)
+{
+	asm volatile("sfence\n\t"
+		     : : : "memory");
+}
+
+static void ctrl_handler(int signo)
+{
+	free(startptr);
+	printf("\nEnding\n");
+	sb();
+	exit(EXIT_SUCCESS);
+}
+
+static void cl_flush(void *p)
+{
+	asm volatile("clflush (%0)\n\t"
+		     : : "r"(p) : "memory");
+}
+
+static void mem_flush(void *p, size_t s)
+{
+	char *cp = (char *)p;
+	size_t i = 0;
+
+	s = s / CL_SIZE; /* mem size in cache llines */
+
+	for (i = 0; i < s; i++)
+		cl_flush(&cp[i * CL_SIZE]);
+
+	sb();
+}
+
+static void *malloc_and_init_memory(size_t s)
+{
+	uint64_t *p64;
+	size_t s64;
+
+	void *p = memalign(PAGE_SIZE, s);
+
+	p64 = (uint64_t *)p;
+	s64 = s / sizeof(uint64_t);
+
+	while (s64 > 0) {
+		*p64 = (uint64_t)rand();
+		p64 += (CL_SIZE / sizeof(uint64_t));
+		s64 -= (CL_SIZE / sizeof(uint64_t));
+	}
+
+	return p;
+}
+
+static void fill_cache_read(unsigned char *start_ptr, unsigned char *end_ptr)
+{
+	while (1) {
+		unsigned char sum, *p;
+
+		p = start_ptr;
+		/* Read two chars in each cache line to stress cache */
+		while (p < (end_ptr - 1024)) {
+			sum += p[0] + p[32] + p[64] + p[96] + p[128] +
+			       p[160] + p[192] + p[224] + p[256] + p[288] +
+			       p[320] + p[352] + p[384] + p[416] + p[448] +
+			       p[480] + p[512] + p[544] + p[576] + p[608] +
+			       p[640] + p[672] + p[704] + p[736] + p[768] +
+			       p[800] + p[832] + p[864] + p[896] + p[928] +
+			       p[960] + p[992];
+			p += 1024;
+		}
+	}
+}
+
+static void fill_cache_write(unsigned char *start_ptr, unsigned char *end_ptr)
+{
+	while (1) {
+		while (start_ptr < end_ptr) {
+			*start_ptr = '1';
+			start_ptr += (CL_SIZE / 2);
+		}
+		start_ptr = startptr;
+	}
+}
+
+static void
+fill_cache(unsigned long long buf_size, int malloc_and_init,
+	   int memflush, int op)
+{
+	unsigned char *start_ptr, *end_ptr;
+	unsigned long long i;
+
+	if (malloc_and_init) {
+		start_ptr = malloc_and_init_memory(buf_size);
+		printf("Started benchmark with memalign\n");
+	} else {
+		start_ptr = malloc(buf_size);
+		printf("Started benchmark with malloc\n");
+	}
+
+	if (!start_ptr)
+		return;
+
+	startptr = start_ptr;
+	end_ptr = start_ptr + buf_size;
+
+	/*
+	 * It's better to touch the memory once to avoid any compiler
+	 * optimizations
+	 */
+	if (!malloc_and_init) {
+		for (i = 0; i < buf_size; i++)
+			*start_ptr++ = (unsigned char)rand();
+	}
+
+	start_ptr = startptr;
+
+	/* Flush the memory before using to avoid "cache hot pages" effect */
+	if (memflush) {
+		mem_flush(start_ptr, buf_size);
+		printf("Started benchmark with memflush\n");
+	} else {
+		printf("Started benchmark *without* memflush\n");
+	}
+
+	if (op == 0)
+		fill_cache_read(start_ptr, end_ptr);
+	else
+		fill_cache_write(start_ptr, end_ptr);
+
+	free(startptr);
+}
+
+int run_fill_buf(int span, int malloc_and_init_memory, int memflush, int op)
+{
+	unsigned long long cache_size = span * MB;
+
+	/* set up ctrl-c handler */
+	if (signal(SIGINT, ctrl_handler) == SIG_ERR)
+		printf("Failed to catch SIGINT!\n");
+	if (signal(SIGHUP, ctrl_handler) == SIG_ERR)
+		printf("Failed to catch SIGHUP!\n");
+
+	printf("Cache size in Bytes = %llu\n", cache_size);
+
+	fill_cache(cache_size, malloc_and_init_memory, memflush, op);
+
+	return -1;
+}
Signature · 1 line
2.5.0
author
#11 lore raw

PATCH v3 6/8 selftests/resctrl: Add MBM test

In reply to Fenghua Yu

From: Arshiya Hayatkhan Pathan <[email protected]>

MBM (Memory Bandwidth Monitoring) test is the first implemented selftest. It starts a stressful memory bandwidth benchmark and assigns the bandwidth pid in a resctrl monitoring group. Read and compare perf IMC counter and MBM total bytes for the benchmark. The numbers should be close enough to pass the test.

Default benchmark is built-in fill_buf. But users can specify their own benchmark by option "-b".

We can add memory bandwidth monitoring for multiple processes in the future.

---
 tools/testing/selftests/resctrl/Makefile        |   8 +-
 tools/testing/selftests/resctrl/mbm_test.c      | 145 ++++++++++++++++++++++++
 tools/testing/selftests/resctrl/membw.c         |   2 +
 tools/testing/selftests/resctrl/resctrl.h       |   3 +
 tools/testing/selftests/resctrl/resctrl_tests.c | 123 ++++++++++++++++++++
 5 files changed, 280 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/resctrl/mbm_test.c
 create mode 100644 tools/testing/selftests/resctrl/resctrl_tests.c
tools/testing/selftests/resctrl/Makefile +7 -1
index bd5c5418961e..51165f9f8a9d 100644
@@ -1,10 +1,16 @@
 CC = gcc
 CFLAGS = -g -Wall
 
+all: resctrl_tests
+
 *.o: *.c
 	$(CC) $(CFLAGS) -c *.c
 
+resctrl_tests: *.o
+	$(CC) $(CFLAGS) -o resctrl_tests resctrl_tests.o resctrlfs.o \
+		 membw.o fill_buf.o mbm_test.o
+
 .PHONY: clean
 
 clean:
-	$(RM) *.o *~
+	$(RM) *.o *~ resctrl_tests
tools/testing/selftests/resctrl/mbm_test.c new file +145 -0

145 lines not on this page · raw message

tools/testing/selftests/resctrl/membw.c +2 -0
index 75a20de0ff71..607e764a7b7a 100644
@@ -436,6 +436,8 @@ pid_t bm_pid, ppid;
 static void ctrlc_handler(int signum, siginfo_t *info, void *ptr)
 {
 	kill(bm_pid, SIGKILL);
+	umount_resctrlfs();
+	tests_cleanup();
 	printf("Ending\n\n");
 
 	exit(EXIT_SUCCESS);
tools/testing/selftests/resctrl/resctrl.h +3 -0
index 9820af253d4d..231c1eac54e0 100644
@@ -70,5 +70,8 @@ int perf_event_open(struct perf_event_attr *hw_event, pid_t pid, int cpu,
 		    int group_fd, unsigned long flags);
 int run_fill_buf(int span, int malloc_and_init_memory, int memflush, int op);
 int membw_val(char **benchmark_cmd, struct resctrl_val_param *param);
+int mbm_bw_change(int span, int core_id, char *bw_report, char **benchmark_cmd);
+void tests_cleanup(void);
+void mbm_test_cleanup(void);
 
 #endif /* RESCTRL_H */
tools/testing/selftests/resctrl/resctrl_tests.c new file +123 -0

123 lines not on this page · raw message

Signature · 1 line
2.5.0
author
#12 lore raw

PATCH v3 7/8 selftests/resctrl: Add MBA test

In reply to Fenghua Yu

From: Arshiya Hayatkhan Pathan <[email protected]>

MBA (Memory Bandwidth Allocation) test starts a stressful memory bandwidth benchmark and allocates memory bandwidth from 100% down to 10% for the benchmark process. For each allocation, compare perf IMC counter and mbm total bytes from resctrl. The difference between the two values should be within a threshold to pass the test.

Default benchmark is built-in fill_buf. But users can specify their own benchmark by option "-b".

We can add memory bandwidth allocation for multiple processes in the future.

---
 tools/testing/selftests/resctrl/Makefile        |   2 +-
 tools/testing/selftests/resctrl/mba_test.c      | 173 ++++++++++++++++++++++++
 tools/testing/selftests/resctrl/resctrl.h       |   2 +
 tools/testing/selftests/resctrl/resctrl_tests.c |  15 +-
 4 files changed, 190 insertions(+), 2 deletions(-)
 create mode 100644 tools/testing/selftests/resctrl/mba_test.c
tools/testing/selftests/resctrl/Makefile +1 -1
index 51165f9f8a9d..bf9f55e71d0c 100644
@@ -8,7 +8,7 @@ all: resctrl_tests
 
 resctrl_tests: *.o
 	$(CC) $(CFLAGS) -o resctrl_tests resctrl_tests.o resctrlfs.o \
-		 membw.o fill_buf.o mbm_test.o
+		 membw.o fill_buf.o mbm_test.o mba_test.o
 
 .PHONY: clean
 
tools/testing/selftests/resctrl/mba_test.c new file +173 -0

173 lines not on this page · raw message

tools/testing/selftests/resctrl/resctrl.h +2 -0
index 231c1eac54e0..fce01c827d81 100644
@@ -73,5 +73,7 @@ int membw_val(char **benchmark_cmd, struct resctrl_val_param *param);
 int mbm_bw_change(int span, int core_id, char *bw_report, char **benchmark_cmd);
 void tests_cleanup(void);
 void mbm_test_cleanup(void);
+int mba_schemata_change(int core_id, char *bw_report, char **benchmark_cmd);
+void mba_test_cleanup(void);
 
 #endif /* RESCTRL_H */
tools/testing/selftests/resctrl/resctrl_tests.c +14 -1
index 8a33809ee196..e4d00fb63769 100644
@@ -29,13 +29,14 @@ static void cmd_help(void)
 void tests_cleanup(void)
 {
 	mbm_test_cleanup();
+	mba_test_cleanup();
 }
 
 int main(int argc, char **argv)
 {
 	char benchmark_cmd_area[BENCHMARK_ARGS][BENCHMARK_ARG_SIZE];
 	int res, c, core_id = 0, span = 250, argc_new = argc, i;
-	bool has_ben = false, mbm_test = true;
+	bool has_ben = false, mbm_test = true, mba_test = true;
 	char *benchmark_cmd[BENCHMARK_ARGS];
 	char bw_report[64], bm_type[64];
 
@@ -47,9 +48,12 @@ int main(int argc, char **argv)
 			token = strtok(optarg, ",");
 
 			mbm_test = false;
+			mba_test = false;
 			while (token) {
 				if (!strcmp(token, "mbm")) {
 					mbm_test = true;
+				} else if (!strcmp(token, "mba")) {
+					mba_test = true;
 				} else {
 					printf("invalid argument\n");
 
@@ -119,5 +123,14 @@ int main(int argc, char **argv)
 			printf("Error in running tests for mbm bw change!\n");
 	}
 
+	if (mba_test) {
+		printf("\nMBA Schemata Change Starting..\n");
+		if (!has_ben)
+			sprintf(benchmark_cmd[1], "%d", span);
+		res = mba_schemata_change(core_id, bw_report, benchmark_cmd);
+		if (res)
+			printf("Error in tests for mba-change-schemata!\n");
+	}
+
 	return 0;
 }
Signature · 1 line
2.5.0
author
#13 lore raw

PATCH v3 8/8 selftests/resctrl: Add the test in MAINTAINERS

In reply to Fenghua Yu

The resctrl selftest will be maintained by RDT maintainers.

---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)
MAINTAINERS +1 -0
index 48a65c3a4189..ecd1369ef761 100644
@@ -12270,6 +12270,7 @@ S:	Supported
 F:	arch/x86/kernel/cpu/intel_rdt*
 F:	arch/x86/include/asm/intel_rdt_sched.h
 F:	Documentation/x86/intel_rdt*
+F:	tools/testing/selftests/resctrl
 
 READ-COPY UPDATE (RCU)
 M:	"Paul E. McKenney" <[email protected]>
Signature · 1 line
2.5.0