watchdog/core: Add watchdog_thresh command line parameter
PATCH v8 1/1 watchdog/core: Add watchdog_thresh command line parameter
The hard and soft lockup detector threshold has a default value of 10 seconds which can only be changed via sysctl.
During early boot lockup detection can trigger when noisy debugging emits a large amount of messages to the console, but there is no way to set a larger threshold on the kernel command line. The detector can only be completely disabled.
Add a new watchdog_thresh= command line parameter to allow boot time control over the threshold. It works in the same way as the sysctl and affects both the soft and the hard lockup detectors.
--- Documentation/admin-guide/kernel-parameters.txt | 8 ++++++++ kernel/watchdog.c | 7 +++++++ 2 files changed, 15 insertions(+)
Documentation/admin-guide/kernel-parameters.txt +8 -0
@@ -4932,6 +4932,14 @@ or other driver-specific files in the Documentation/watchdog/ directory. + watchdog_thresh= + [KNL] + Set the hard lockup detector stall duration + threshold in seconds. The soft lockup detector + threshold is set to twice the value. A value of 0 + disables both lockup detectors. Default is 10 + seconds. + workqueue.watchdog_thresh= If CONFIG_WQ_WATCHDOG is configured, workqueue can warn stall conditions and dump internal state to
kernel/watchdog.c +7 -0
@@ -199,6 +199,13 @@ static int __init nosoftlockup_setup(char *str) }__setup ("nosoftlockup" , nosoftlockup_setup); +static int __init watchdog_thresh_setup (char *str) +{ +get_option (&str, &watchdog_thresh); +return 1 ; +} +__setup ("watchdog_thresh=" , watchdog_thresh_setup); +#ifdef CONFIG_SMP int __read_mostly sysctl_softlockup_all_cpu_backtrace;
Signature · 1 line
1.8.3.1
tip-bot for Laurence Oberman
merge botwatchdog/core: Add watchdog_thresh command line parameter
Commit-ID: 11295055526308ee71d82dc97f0a9ca2dd61c3b9 Gitweb: https://git.kernel.org/tip/11295055526308ee71d82dc97f0a9ca2dd61c3b9 Author: Laurence Oberman <[email protected]> AuthorDate: Thu, 1 Nov 2018 09:30:18 -0400 Committer: Thomas Gleixner <[email protected]> CommitDate: Thu, 1 Nov 2018 14:33:35 +0100
watchdog/core: Add watchdog_thresh command line parameter
The hard and soft lockup detector threshold has a default value of 10 seconds which can only be changed via sysctl.
During early boot lockup detection can trigger when noisy debugging emits a large amount of messages to the console, but there is no way to set a larger threshold on the kernel command line. The detector can only be completely disabled.
Add a new watchdog_thresh= command line parameter to allow boot time control over the threshold. It works in the same way as the sysctl and affects both the soft and the hard lockup detectors.
--- Documentation/admin-guide/kernel-parameters.txt | 8 ++++++++ kernel/watchdog.c | 7 +++++++ 2 files changed, 15 insertions(+)
Documentation/admin-guide/kernel-parameters.txt +8 -0
@@ -4957,6 +4957,14 @@ or other driver-specific files in the Documentation/watchdog/ directory. + watchdog_thresh= + [KNL] + Set the hard lockup detector stall duration + threshold in seconds. The soft lockup detector + threshold is set to twice the value. A value of 0 + disables both lockup detectors. Default is 10 + seconds. + workqueue.watchdog_thresh= If CONFIG_WQ_WATCHDOG is configured, workqueue can warn stall conditions and dump internal state to
kernel/watchdog.c +7 -0
@@ -199,6 +199,13 @@ static int __init nosoftlockup_setup(char *str) }__setup ("nosoftlockup" , nosoftlockup_setup); +static int __init watchdog_thresh_setup (char *str) +{ +get_option (&str, &watchdog_thresh); +return 1 ; +} +__setup ("watchdog_thresh=" , watchdog_thresh_setup); +#ifdef CONFIG_SMP int __read_mostly sysctl_softlockup_all_cpu_backtrace;