perf cs-etm: Add support for sample flags
v2 cover perf cs-etm: Add support for sample flags
This patch seris adds support for sample flags so can facilitate perf to print sample flags for branch instruction.
The patch 0001 is to set branch instruction flags in packet, this patch has the core code in this series to set flags according to the decoding element type, and also based on the elements including instruction type, subtype and condition flag to help making decision to set flags value.
The patch 0002 is to support sample flags by copying the flags value from packet structure to sample structure, and it includes three fixing up for TRACE_ON/TRACE_OFF and exception packets.
The patch series is based on OpenCSD v0.10.0 and Rob's patch 'perf:
Support for Arm A32/T32 instruction sets in CoreSight trace' also is prerequisite to support A32/T32 ISAs.
This patch series is applied on the acme's perf core branch [1] with the latest commit f1d23afaf677 ("perf bpf: Reduce the hardcoded .max_entries for pid_maps") and has two prerequisites:
1) It's dependent on Rob's patch 'perf: Support for Arm A32/T32 instruction sets in CoreSight trace' [2];
2) It's dependent on another patch series 'perf cs-etm: Correct packets handling' [3].
After applying the dependency patches and this patch series, we can verify sample flags with below command:
# perf script -F,-time,+flags,+ip,+sym,+dso,+addr,+symoff -k vmlinux
Changes from v1:
* Moved exception packets handling patches into patch series 'perf
cs-etm: Correct packets handling'.
* Added sample flags fixing up for TRACE_OFF packet.
* Created a new function which is used to maintain flags fixing up.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/log/?h=perf/core
[2] http://archive.armlinux.org.uk/lurker/message/20181109.091126.9d69489d.en.html
[3] http://archive.armlinux.org.uk/lurker/message/20181111.045938.782b378b.en.html
Leo Yan (2):
perf cs-etm: Set branch instruction flags in packet perf cs-etm: Add support sample flags
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 168 ++++++++++++++++++++++++ tools/perf/util/cs-etm-decoder/cs-etm-decoder.h | 1 + tools/perf/util/cs-etm.c | 43 +++++- 3 files changed, 210 insertions(+), 2 deletions(-)
Signature · 1 line
2.7.4
PATCH v2 1/2 perf cs-etm: Set branch instruction flags in packet
The perf sample data contains flags to indicate the hardware trace data is belonging to which type branch instruction, thus this can be used to print out the human readable string. Arm CoreSight ETM sample data is missed to set flags and it is always set to zeros, this results in perf tool skips to print string for instruction types.
Arm CoreSight ETM supports different kinds instruction of A64, A32 and T32; this patch is to set branch instruction flags in packet for these ISAs.
The brief idea for patch implementation is describe as below:
- For element with OCSD_GEN_TRC_ELEM_TRACE_ON type, it is taken as trace beginning packet; for element with OCSD_GEN_TRC_ELEM_NO_SYNC or OCSD_GEN_TRC_ELEM_EO_TRACE, these two kinds elements are used to set for trace end;
As Mike suggested the packet stream might have more than one two TRACE_ON packets, the first one TRACE_ON packet indicates trace end and the second one is taken as trace restarting. We will handle this special case in the upper layer with packet queue handling, which has more context so it's more suitable fix up for it. This will be accomplished in the sequential patch.
- For instruction range packet, mainly base on three factors to decide the branch instruction types:
elem->last_i_type
elem->last_i_subtype
elem->last_instr_cond
If the instruction is immediate branch but without link and return flag, we consider it as function internal branch; in fact the immediate branch also can be used to invoke the function entry, usually this is only used in assembly code to directly call a symbol and don't expect to return back; after reviewing kernel normal functions and user space programs, both of them are very seldom to use immediate branch for function call. On the other hand, if we want to decide the immediate branch is for function branch jumping or for function calling, we need to rely on the start address of next packet and check the symbol offset for the start address, this will introduce much complexity in the implementation. So for this version we simply consider immediate branch as function internal branch. Moreover, we rely on 'elem->last_instr_cond' to decide if the branch instruction is a conditional branch or not.
If the instruction is immediate branch with link, it's instruction 'BL' and which is used for function call.
If the instruction is indirect branch and with subtype OCSD_S_INSTR_V7_IMPLIED_RET, the decoders gives the hint the function return for below cases related with A32/T32 instruction; set this branch flag as function return (Thanks for Al's suggestion).
BX R14
MOV PC, LR
POP {?, PC}
LDR PC, [SP], #offset
If the instruction is indirect branch without link, this is corresponding to instruction 'BR', this instruction usually is used for dynamic link lib with below usage; so we think it's a return instruction.
0000000000000680 <.plt>:
680: a9bf7bf0 stp x16, x30, [sp, #-16]!
684: 90000090 adrp x16, 10000 <__FRAME_END__+0xf630>
688: f947fe11 ldr x17, [x16, #4088]
68c: 913fe210 add x16, x16, #0xff8
690: d61f0220 br x17If the instruction is indirect branch with link, e.g BLR, we think it's a function call.
For function return, ARMv8 introduces a dedicated instruction 'ret', which has flag of OCSD_S_INSTR_V8_RET.
- For exception packets, this patch divides into three types:
The first type of exception is caused by external logics like bus, interrupt controller, debug module or PE reset or halt; this is corresponding to flags "bcyi" which defined in doc perf-script.txt;
The second type is for system call, this is set as "bcs" by following definition in the doc;
The third type is for CPU trap, data and instruction prefetch abort, alignment abort; usually these exceptions are synchronous for CPU, so set them as "bci" type.
--- tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 168 ++++++++++++++++++++++++ tools/perf/util/cs-etm-decoder/cs-etm-decoder.h | 1 + 2 files changed, 169 insertions(+)
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +168 -0
@@ -303,6 +303,7 @@ cs_etm_decoder__buffer_packet(struct cs_etm_decoder *decoder, decoder->packet_buffer[et].instr_count =0 ; decoder->packet_buffer[et].last_instr_taken_branch = false; decoder->packet_buffer[et].last_instr_size =0 ; + decoder->packet_buffer[et].flags =0 ;if (decoder->packet_count ==MAX_BUFFER -1 )return OCSD_RESP_WAIT ;
@@ -437,6 +438,171 @@ cs_etm_decoder__buffer_exception_ret(struct cs_etm_decoder *decoder, CS_ETM_EXCEPTION_RET); } +static void cs_etm_decoder__set_sample_flags ( +const void *context, +const ocsd_generic_trace_elem *elem) +{ +struct cs_etm_decoder *decoder = (struct cs_etm_decoder *) context; +struct cs_etm_packet *packet; +u32 exc_num; + + packet = &decoder->packet_buffer[decoder->tail]; + +switch (elem->elem_type) { +case OCSD_GEN_TRC_ELEM_TRACE_ON : + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_TRACE_BEGIN ; +break ; + +case OCSD_GEN_TRC_ELEM_NO_SYNC : +case OCSD_GEN_TRC_ELEM_EO_TRACE : + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_TRACE_END ; +break ; + +case OCSD_GEN_TRC_ELEM_INSTR_RANGE : +/* +* Immediate branch instruction without neither link nor +* return flag, it's normal branch instruction within +* the function. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR && + elem->last_i_subtype ==OCSD_S_INSTR_NONE ) { + packet->flags =PERF_IP_FLAG_BRANCH ; + +if (elem->last_instr_cond) + packet->flags |=PERF_IP_FLAG_CONDITIONAL ; + } + +/* +* Immediate branch instruction with link (e.g. BL), this is +* branch instruction for function call. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR && + elem->last_i_subtype ==OCSD_S_INSTR_BR_LINK ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL ; + +/* +* Indirect branch instruction with subtype of +* OCSD_S_INSTR_V7_IMPLIED_RET, this is explicit hint for +* function return for A32/T32. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_V7_IMPLIED_RET ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN ; + +/* +* Indirect branch instruction without link (e.g. BR), usually +* this is used for function return, especially for functions +* within dynamic link lib. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_NONE ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN ; + +/* +* Indirect branch instruction with link (e.g. BLR), this is +* branch instruction for function call. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_BR_LINK ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL ; + +/* Return instruction for function return. */ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_V8_RET ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN ; + +break ; + +case OCSD_GEN_TRC_ELEM_EXCEPTION : + +#define OCSD_EXC_RESET 0 +#define OCSD_EXC_DEBUG_HALT 1 +#define OCSD_EXC_CALL 2 +#define OCSD_EXC_TRAP 3 +#define OCSD_EXC_SYSTEM_ERROR 4 +#define OCSD_EXC_INST_DEBUG 6 +#define OCSD_EXC_DATA_DEBUG 7 +#define OCSD_EXC_ALIGNMENT 10 +#define OCSD_EXC_INST_FAULT 11 +#define OCSD_EXC_DATA_FAULT 12 +#define OCSD_EXC_IRQ 14 +#define OCSD_EXC_FIQ 15 + + exc_num = decoder->exc_num[packet->cpu]; + +/* +* The exceptions are triggered by external signals +* from bus, interrupt controller, debug module, +* PE reset or halt. +*/ +if (exc_num ==OCSD_EXC_RESET || + exc_num ==OCSD_EXC_DEBUG_HALT || + exc_num ==OCSD_EXC_SYSTEM_ERROR || + exc_num ==OCSD_EXC_INST_DEBUG || + exc_num ==OCSD_EXC_DATA_DEBUG || + exc_num ==OCSD_EXC_IRQ || + exc_num ==OCSD_EXC_FIQ ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL | +PERF_IP_FLAG_ASYNC | +PERF_IP_FLAG_INTERRUPT ; + +/* The exception is for system call. */ +if (exc_num ==OCSD_EXC_CALL ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL | +PERF_IP_FLAG_SYSCALLRET ; + +/* +* The exception is introduced by trap, instruction & +* data fault or alignment errors. +*/ +if (exc_num ==OCSD_EXC_TRAP || + exc_num ==OCSD_EXC_ALIGNMENT || + exc_num ==OCSD_EXC_INST_FAULT || + exc_num ==OCSD_EXC_DATA_FAULT ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL | +PERF_IP_FLAG_INTERRUPT ; + +break ; + +case OCSD_GEN_TRC_ELEM_EXCEPTION_RET : + + exc_num = decoder->exc_num[packet->cpu]; + +if (exc_num ==OCSD_EXC_CALL ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN | +PERF_IP_FLAG_SYSCALLRET ; +else + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN | +PERF_IP_FLAG_INTERRUPT ; + +break ; + +case OCSD_GEN_TRC_ELEM_UNKNOWN : +case OCSD_GEN_TRC_ELEM_PE_CONTEXT : +case OCSD_GEN_TRC_ELEM_ADDR_NACC : +case OCSD_GEN_TRC_ELEM_TIMESTAMP : +case OCSD_GEN_TRC_ELEM_CYCLE_COUNT : +case OCSD_GEN_TRC_ELEM_ADDR_UNKNOWN : +case OCSD_GEN_TRC_ELEM_EVENT : +case OCSD_GEN_TRC_ELEM_SWTRACE : +case OCSD_GEN_TRC_ELEM_CUSTOM : +default : +break ; + } +} + static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( const void *context, const ocsd_trc_index_t indx __maybe_unused,
@@ -484,6 +650,8 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer(break ; } +cs_etm_decoder__set_sample_flags (context, elem); +return resp; }
tools/perf/util/cs-etm-decoder/cs-etm-decoder.h +1 -0
@@ -47,6 +47,7 @@ struct cs_etm_packet {u8 last_instr_taken_branch;u8 last_instr_size;int cpu; +u32 flags; };struct cs_etm_queue ;
Signature · 1 line
2.7.4
Re: [PATCH v2 1/2] perf cs-etm: Set branch instruction flags in packet
Quoted 83 lines · Leo Yan
The perf sample data contains flags to indicate the hardware trace data is belonging to which type branch instruction, thus this can be used to print out the human readable string. Arm CoreSight ETM sample data is missed to set flags and it is always set to zeros, this results in perf tool skips to print string for instruction types.
Arm CoreSight ETM supports different kinds instruction of A64, A32 and T32; this patch is to set branch instruction flags in packet for these ISAs.
The brief idea for patch implementation is describe as below:
- For element with
OCSD_GEN_TRC_ELEM_TRACE_ONtype, it is taken as trace beginning packet; for element withOCSD_GEN_TRC_ELEM_NO_SYNCorOCSD_GEN_TRC_ELEM_EO_TRACE, these two kinds elements are used to set for trace end;As Mike suggested the packet stream might have more than one two
TRACE_ONpackets, the first oneTRACE_ONpacket indicates trace end and the second one is taken as trace restarting. We will handle this special case in the upper layer with packet queue handling, which has more context so it's more suitable fix up for it. This will be accomplished in the sequential patch.- For instruction range packet, mainly base on three factors to decide the branch instruction types:
elem->last_i_type
elem->last_i_subtype
elem->last_instr_condIf the instruction is immediate branch but without link and return flag, we consider it as function internal branch; in fact the immediate branch also can be used to invoke the function entry, usually this is only used in assembly code to directly call a symbol and don't expect to return back; after reviewing kernel normal functions and user space programs, both of them are very seldom to use immediate branch for function call. On the other hand, if we want to decide the immediate branch is for function branch jumping or for function calling, we need to rely on the start address of next packet and check the symbol offset for the start address, this will introduce much complexity in the implementation. So for this version we simply consider immediate branch as function internal branch. Moreover, we rely on '
elem->last_instr_cond' to decide if the branch instruction is a conditional branch or not.If the instruction is immediate branch with link, it's instruction 'BL' and which is used for function call.
If the instruction is indirect branch and with subtype
OCSD_S_INSTR_V7_IMPLIED_RET, the decoders gives the hint the function return for below cases related with A32/T32 instruction; set this branch flag as function return (Thanks for Al's suggestion).BX R14
MOV PC, LR
POP {?, PC}
LDR PC, [SP], #offsetIf the instruction is indirect branch without link, this is corresponding to instruction 'BR', this instruction usually is used for dynamic link lib with below usage; so we think it's a return instruction.
0000000000000680 <.plt>: 680: a9bf7bf0 stp x16, x30, [sp, #-16]! 684: 90000090 adrp x16, 10000 <__FRAME_END__+0xf630> 688: f947fe11 ldr x17, [x16, #4088] 68c: 913fe210 add x16, x16, #0xff8 690: d61f0220 br x17If the instruction is indirect branch with link, e.g BLR, we think it's a function call.
For function return, ARMv8 introduces a dedicated instruction 'ret', which has flag of
OCSD_S_INSTR_V8_RET.- For exception packets, this patch divides into three types:
The first type of exception is caused by external logics like bus, interrupt controller, debug module or PE reset or halt; this is corresponding to flags "bcyi" which defined in doc perf-script.txt;
Quoted 6 lines
The second type is for system call, this is set as "bcs" by following definition in the doc;
The third type is for CPU trap, data and instruction prefetch abort, alignment abort; usually these exceptions are synchronous for CPU, so set them as "bci" type.
This is too long and needs to be broken down into pieces. I would split this patch in 3 heat, one for NO_SYNC and TRACE_ON, one for INSTR_RANGE and one for ELEM_EXCEPTION/ELEM_EXCEPTION_RET.
Quoted 19 lines
Cc Mathieu Poirier <[email protected]>Cc Mike Leach <[email protected]>Cc Robert Walker <[email protected]>Cc Al Grant <[email protected]>Cc Andi Kleen <[email protected]>Cc Adrian Hunter <[email protected]>Cc Arnaldo Carvalho de Melo <[email protected]>Signed-off-by Leo Yan <[email protected]>--- tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 168 ++++++++++++++++++++++++ tools/perf/util/cs-etm-decoder/cs-etm-decoder.h | 1 + 2 files changed, 169 insertions(+)tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +0
-0
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c cs_etm_decoder__buffer_packet(struct cs_etm_decoder *decoder, · line 306
Quoted 4 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +1
-0@@ -303,6 +303,7 @@ cs_etm_decoder__buffer_packet(struct cs_etm_decoder *decoder, decoder->packet_buffer[et].instr_count =0 ; decoder->packet_buffer[et].last_instr_taken_branch = false; decoder->packet_buffer[et].last_instr_size =0 ; + decoder->packet_buffer[et].flags =0 ;
Since PERF_IP_FLAG_BRANCH is '0', I would set this to UNINT32_MAX.
Quoted 76 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +69
-0if (decoder->packet_count ==MAX_BUFFER -1 )return OCSD_RESP_WAIT ;@@ -437,6 +438,171 @@ cs_etm_decoder__buffer_exception_ret(struct cs_etm_decoder *decoder, CS_ETM_EXCEPTION_RET); } +static void cs_etm_decoder__set_sample_flags ( +const void *context, +const ocsd_generic_trace_elem *elem) +{ +struct cs_etm_decoder *decoder = (struct cs_etm_decoder *) context; +struct cs_etm_packet *packet; +u32 exc_num; + + packet = &decoder->packet_buffer[decoder->tail]; + +switch (elem->elem_type) { +case OCSD_GEN_TRC_ELEM_TRACE_ON : + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_TRACE_BEGIN ; +break ; + +case OCSD_GEN_TRC_ELEM_NO_SYNC : +case OCSD_GEN_TRC_ELEM_EO_TRACE : + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_TRACE_END ; +break ; + +case OCSD_GEN_TRC_ELEM_INSTR_RANGE : +/* +* Immediate branch instruction without neither link nor +* return flag, it's normal branch instruction within +* the function. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR && + elem->last_i_subtype ==OCSD_S_INSTR_NONE ) { + packet->flags =PERF_IP_FLAG_BRANCH ; + +if (elem->last_instr_cond) + packet->flags |=PERF_IP_FLAG_CONDITIONAL ; + } + +/* +* Immediate branch instruction with link (e.g. BL), this is +* branch instruction for function call. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR && + elem->last_i_subtype ==OCSD_S_INSTR_BR_LINK ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL ; + +/* +* Indirect branch instruction with subtype of +* OCSD_S_INSTR_V7_IMPLIED_RET, this is explicit hint for +* function return for A32/T32. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_V7_IMPLIED_RET ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN ; + +/* +* Indirect branch instruction without link (e.g. BR), usually +* this is used for function return, especially for functions +* within dynamic link lib. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_NONE ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN ; + +/* +* Indirect branch instruction with link (e.g. BLR), this is +* branch instruction for function call. +*/
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c cs_etm_decoder__buffer_exception_ret(struct cs_etm_decoder *decoder, · line 519
Quoted 10 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +10
-0+if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_BR_LINK ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL ; + +/* Return instruction for function return. */ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_V8_RET ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN ;
I would swap the last to if() condition so that the (BRANCH | RETURN) flags are all at the same place.
Quoted 7 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +7
-0+ +break ; + +case OCSD_GEN_TRC_ELEM_EXCEPTION : + +#define OCSD_EXC_RESET 0 +#define OCSD_EXC_DEBUG_HALT 1
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c cs_etm_decoder__buffer_exception_ret(struct cs_etm_decoder *decoder, · line 536
Quoted 10 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +10
-0+#define OCSD_EXC_CALL 2 +#define OCSD_EXC_TRAP 3 +#define OCSD_EXC_SYSTEM_ERROR 4 +#define OCSD_EXC_INST_DEBUG 6 +#define OCSD_EXC_DATA_DEBUG 7 +#define OCSD_EXC_ALIGNMENT 10 +#define OCSD_EXC_INST_FAULT 11 +#define OCSD_EXC_DATA_FAULT 12 +#define OCSD_EXC_IRQ 14 +#define OCSD_EXC_FIQ 15
Where did you get the above? To me this is something that should come from the library.
Quoted 73 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +69
-0+ + exc_num = decoder->exc_num[packet->cpu]; + +/* +* The exceptions are triggered by external signals +* from bus, interrupt controller, debug module, +* PE reset or halt. +*/ +if (exc_num ==OCSD_EXC_RESET || + exc_num ==OCSD_EXC_DEBUG_HALT || + exc_num ==OCSD_EXC_SYSTEM_ERROR || + exc_num ==OCSD_EXC_INST_DEBUG || + exc_num ==OCSD_EXC_DATA_DEBUG || + exc_num ==OCSD_EXC_IRQ || + exc_num ==OCSD_EXC_FIQ ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL | +PERF_IP_FLAG_ASYNC | +PERF_IP_FLAG_INTERRUPT ; + +/* The exception is for system call. */ +if (exc_num ==OCSD_EXC_CALL ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL | +PERF_IP_FLAG_SYSCALLRET ; + +/* +* The exception is introduced by trap, instruction & +* data fault or alignment errors. +*/ +if (exc_num ==OCSD_EXC_TRAP || + exc_num ==OCSD_EXC_ALIGNMENT || + exc_num ==OCSD_EXC_INST_FAULT || + exc_num ==OCSD_EXC_DATA_FAULT ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL | +PERF_IP_FLAG_INTERRUPT ; + +break ; + +case OCSD_GEN_TRC_ELEM_EXCEPTION_RET : + + exc_num = decoder->exc_num[packet->cpu]; + +if (exc_num ==OCSD_EXC_CALL ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN | +PERF_IP_FLAG_SYSCALLRET ; +else + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN | +PERF_IP_FLAG_INTERRUPT ; + +break ; + +case OCSD_GEN_TRC_ELEM_UNKNOWN : +case OCSD_GEN_TRC_ELEM_PE_CONTEXT : +case OCSD_GEN_TRC_ELEM_ADDR_NACC : +case OCSD_GEN_TRC_ELEM_TIMESTAMP : +case OCSD_GEN_TRC_ELEM_CYCLE_COUNT : +case OCSD_GEN_TRC_ELEM_ADDR_UNKNOWN : +case OCSD_GEN_TRC_ELEM_EVENT : +case OCSD_GEN_TRC_ELEM_SWTRACE : +case OCSD_GEN_TRC_ELEM_CUSTOM : +default : +break ; + } +} + static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( const void *context, const ocsd_trc_index_t indx __maybe_unused,
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( · line 654
Quoted 5 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +2
-0@@ -484,6 +650,8 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer(break ; } +cs_etm_decoder__set_sample_flags (context, elem); +
I was toying with the idea of setting the flags in each of the case statement found in cs_etm_decoder__gen_trace_elem_printer(). But that would move more code around and the end result would be the same so let's keep it that way until we have a good reason to split it.
Mathieu
Quoted 18 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +0
-0return resp; }tools/perf/util/cs-etm-decoder/cs-etm-decoder.h +1
-0@@ -47,6 +47,7 @@ struct cs_etm_packet {u8 last_instr_taken_branch;u8 last_instr_size;int cpu; +u32 flags; };struct cs_etm_queue ;Signature · 1 line
2.7.4
Re: [PATCH v2 1/2] perf cs-etm: Set branch instruction flags in packet
Quoted 87 lines · Mathieu Poirier
Quoted 86 lines · Leo Yan
The perf sample data contains flags to indicate the hardware trace data is belonging to which type branch instruction, thus this can be used to print out the human readable string. Arm CoreSight ETM sample data is missed to set flags and it is always set to zeros, this results in perf tool skips to print string for instruction types.
Arm CoreSight ETM supports different kinds instruction of A64, A32 and T32; this patch is to set branch instruction flags in packet for these ISAs.
The brief idea for patch implementation is describe as below:
- For element with
OCSD_GEN_TRC_ELEM_TRACE_ONtype, it is taken as trace beginning packet; for element withOCSD_GEN_TRC_ELEM_NO_SYNCorOCSD_GEN_TRC_ELEM_EO_TRACE, these two kinds elements are used to set for trace end;As Mike suggested the packet stream might have more than one two
TRACE_ONpackets, the first oneTRACE_ONpacket indicates trace end and the second one is taken as trace restarting. We will handle this special case in the upper layer with packet queue handling, which has more context so it's more suitable fix up for it. This will be accomplished in the sequential patch.- For instruction range packet, mainly base on three factors to decide the branch instruction types:
elem->last_i_type
elem->last_i_subtype
elem->last_instr_condIf the instruction is immediate branch but without link and return flag, we consider it as function internal branch; in fact the immediate branch also can be used to invoke the function entry, usually this is only used in assembly code to directly call a symbol and don't expect to return back; after reviewing kernel normal functions and user space programs, both of them are very seldom to use immediate branch for function call. On the other hand, if we want to decide the immediate branch is for function branch jumping or for function calling, we need to rely on the start address of next packet and check the symbol offset for the start address, this will introduce much complexity in the implementation. So for this version we simply consider immediate branch as function internal branch. Moreover, we rely on '
elem->last_instr_cond' to decide if the branch instruction is a conditional branch or not.If the instruction is immediate branch with link, it's instruction 'BL' and which is used for function call.
If the instruction is indirect branch and with subtype
OCSD_S_INSTR_V7_IMPLIED_RET, the decoders gives the hint the function return for below cases related with A32/T32 instruction; set this branch flag as function return (Thanks for Al's suggestion).BX R14
MOV PC, LR
POP {…, PC}
LDR PC, [SP], #offsetIf the instruction is indirect branch without link, this is corresponding to instruction 'BR', this instruction usually is used for dynamic link lib with below usage; so we think it's a return instruction.
0000000000000680 <.plt>: 680: a9bf7bf0 stp x16, x30, [sp, #-16]! 684: 90000090 adrp x16, 10000 <__FRAME_END__+0xf630> 688: f947fe11 ldr x17, [x16, #4088] 68c: 913fe210 add x16, x16, #0xff8 690: d61f0220 br x17If the instruction is indirect branch with link, e.g BLR, we think it's a function call.
For function return, ARMv8 introduces a dedicated instruction 'ret', which has flag of
OCSD_S_INSTR_V8_RET.- For exception packets, this patch divides into three types:
The first type of exception is caused by external logics like bus, interrupt controller, debug module or PE reset or halt; this is corresponding to flags "bcyi" which defined in doc perf-script.txt;
The second type is for system call, this is set as "bcs" by following definition in the doc;
Quoted 7 lines
Quoted 3 lines
The third type is for CPU trap, data and instruction prefetch abort, alignment abort; usually these exceptions are synchronous for CPU, so set them as "bci" type.
This is too long and needs to be broken down into pieces. I would split this patch in 3 heat, one for
NO_SYNCandTRACE_ON, one forINSTR_RANGEand one for ELEM_EXCEPTION/ELEM_EXCEPTION_RET.
This makes sense, will split to 3 patches.
Quoted 14 lines
Quoted 14 lines
Cc Mathieu Poirier <[email protected]>Cc Mike Leach <[email protected]>Cc Robert Walker <[email protected]>Cc Al Grant <[email protected]>Cc Andi Kleen <[email protected]>Cc Adrian Hunter <[email protected]>Cc Arnaldo Carvalho de Melo <[email protected]>Signed-off-by Leo Yan <[email protected]>--- tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 168 ++++++++++++++++++++++++ tools/perf/util/cs-etm-decoder/cs-etm-decoder.h | 1 + 2 files changed, 169 insertions(+)
Quoted 11 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c cs_etm_decoder__buffer_packet(struct cs_etm_decoder *decoder, · line 306
Quoted 9 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +1
-0@@ -303,6 +303,7 @@ cs_etm_decoder__buffer_packet(struct cs_etm_decoder *decoder, decoder->packet_buffer[et].instr_count =0 ; decoder->packet_buffer[et].last_instr_taken_branch = false; decoder->packet_buffer[et].last_instr_size =0 ; + decoder->packet_buffer[et].flags =0 ;Since
PERF_IP_FLAG_BRANCHis '0', I would set this toUNINT32_MAX.
PERF_IP_FLAG_BRANCH is bit 0 is set (so it's 1) but not 0. If initialize value to UNINT32_MAX (0xFFFF,FFFF) that means all flags has been set and this will introduce confusion. So will keep to init flags to 0.
Quoted 81 lines
Quoted 81 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +74
-0if (decoder->packet_count ==MAX_BUFFER -1 )return OCSD_RESP_WAIT ;@@ -437,6 +438,171 @@ cs_etm_decoder__buffer_exception_ret(struct cs_etm_decoder *decoder, CS_ETM_EXCEPTION_RET); } +static void cs_etm_decoder__set_sample_flags ( +const void *context, +const ocsd_generic_trace_elem *elem) +{ +struct cs_etm_decoder *decoder = (struct cs_etm_decoder *) context; +struct cs_etm_packet *packet; +u32 exc_num; + + packet = &decoder->packet_buffer[decoder->tail]; + +switch (elem->elem_type) { +case OCSD_GEN_TRC_ELEM_TRACE_ON : + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_TRACE_BEGIN ; +break ; + +case OCSD_GEN_TRC_ELEM_NO_SYNC : +case OCSD_GEN_TRC_ELEM_EO_TRACE : + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_TRACE_END ; +break ; + +case OCSD_GEN_TRC_ELEM_INSTR_RANGE : +/* +* Immediate branch instruction without neither link nor +* return flag, it's normal branch instruction within +* the function. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR && + elem->last_i_subtype ==OCSD_S_INSTR_NONE ) { + packet->flags =PERF_IP_FLAG_BRANCH ; + +if (elem->last_instr_cond) + packet->flags |=PERF_IP_FLAG_CONDITIONAL ; + } + +/* +* Immediate branch instruction with link (e.g. BL), this is +* branch instruction for function call. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR && + elem->last_i_subtype ==OCSD_S_INSTR_BR_LINK ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL ; + +/* +* Indirect branch instruction with subtype of +* OCSD_S_INSTR_V7_IMPLIED_RET, this is explicit hint for +* function return for A32/T32. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_V7_IMPLIED_RET ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN ; + +/* +* Indirect branch instruction without link (e.g. BR), usually +* this is used for function return, especially for functions +* within dynamic link lib. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_NONE ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN ; + +/* +* Indirect branch instruction with link (e.g. BLR), this is +* branch instruction for function call. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_BR_LINK ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL ; +
Quoted 8 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c cs_etm_decoder__buffer_exception_ret(struct cs_etm_decoder *decoder, · line 519
Quoted 5 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +5
-0+/* Return instruction for function return. */ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_V8_RET ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN ;I would swap the last to
if()condition so that the (BRANCH | RETURN) flags are all at the same place.
Will follow this in new patch.
Quoted 12 lines
Quoted 12 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +12
-0+ +break ; + +case OCSD_GEN_TRC_ELEM_EXCEPTION : + +#define OCSD_EXC_RESET 0 +#define OCSD_EXC_DEBUG_HALT 1 +#define OCSD_EXC_CALL 2 +#define OCSD_EXC_TRAP 3 +#define OCSD_EXC_SYSTEM_ERROR 4 +#define OCSD_EXC_INST_DEBUG 6 +#define OCSD_EXC_DATA_DEBUG 7
Quoted 8 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c cs_etm_decoder__buffer_exception_ret(struct cs_etm_decoder *decoder, · line 536
Quoted 5 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +5
-0+#define OCSD_EXC_ALIGNMENT 10 +#define OCSD_EXC_INST_FAULT 11 +#define OCSD_EXC_DATA_FAULT 12 +#define OCSD_EXC_IRQ 14 +#define OCSD_EXC_FIQ 15Where did you get the above? To me this is something that should come from the library.
The concept is coming from OpenCSD lib but OpenCSD doesn't define macros for them.
Will polish this and add these macros into OpenCSD header file.
Quoted 76 lines
Quoted 76 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +69
-0+ + exc_num = decoder->exc_num[packet->cpu]; + +/* +* The exceptions are triggered by external signals +* from bus, interrupt controller, debug module, +* PE reset or halt. +*/ +if (exc_num ==OCSD_EXC_RESET || + exc_num ==OCSD_EXC_DEBUG_HALT || + exc_num ==OCSD_EXC_SYSTEM_ERROR || + exc_num ==OCSD_EXC_INST_DEBUG || + exc_num ==OCSD_EXC_DATA_DEBUG || + exc_num ==OCSD_EXC_IRQ || + exc_num ==OCSD_EXC_FIQ ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL | +PERF_IP_FLAG_ASYNC | +PERF_IP_FLAG_INTERRUPT ; + +/* The exception is for system call. */ +if (exc_num ==OCSD_EXC_CALL ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL | +PERF_IP_FLAG_SYSCALLRET ; + +/* +* The exception is introduced by trap, instruction & +* data fault or alignment errors. +*/ +if (exc_num ==OCSD_EXC_TRAP || + exc_num ==OCSD_EXC_ALIGNMENT || + exc_num ==OCSD_EXC_INST_FAULT || + exc_num ==OCSD_EXC_DATA_FAULT ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL | +PERF_IP_FLAG_INTERRUPT ; + +break ; + +case OCSD_GEN_TRC_ELEM_EXCEPTION_RET : + + exc_num = decoder->exc_num[packet->cpu]; + +if (exc_num ==OCSD_EXC_CALL ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN | +PERF_IP_FLAG_SYSCALLRET ; +else + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN | +PERF_IP_FLAG_INTERRUPT ; + +break ; + +case OCSD_GEN_TRC_ELEM_UNKNOWN : +case OCSD_GEN_TRC_ELEM_PE_CONTEXT : +case OCSD_GEN_TRC_ELEM_ADDR_NACC : +case OCSD_GEN_TRC_ELEM_TIMESTAMP : +case OCSD_GEN_TRC_ELEM_CYCLE_COUNT : +case OCSD_GEN_TRC_ELEM_ADDR_UNKNOWN : +case OCSD_GEN_TRC_ELEM_EVENT : +case OCSD_GEN_TRC_ELEM_SWTRACE : +case OCSD_GEN_TRC_ELEM_CUSTOM : +default : +break ; + } +} + static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( const void *context, const ocsd_trc_index_t indx __maybe_unused,@@ -484,6 +650,8 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer(break ; }
Quoted 7 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( · line 654
Quoted 2 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +2
-0+cs_etm_decoder__set_sample_flags (context, elem); +I was toying with the idea of setting the flags in each of the case statement found in
cs_etm_decoder__gen_trace_elem_printer(). But that would move more code around and the end result would be the same so let's keep it that way until we have a good reason to split it.
Do you sugguest to keep current implementation rather than to split flags setting in each of the case statement in cs_etm_decoder__gen_trace_elem_printer()?
I am not 100% sure if I understand correctly for "split it" (split flags setting vs split functions). So please correct me if I misunderstand this.
Thanks,
Leo Yan
Quoted 18 lines
Quoted 18 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +0
-0return resp; }tools/perf/util/cs-etm-decoder/cs-etm-decoder.h +1
-0@@ -47,6 +47,7 @@ struct cs_etm_packet {u8 last_instr_taken_branch;u8 last_instr_size;int cpu; +u32 flags; };struct cs_etm_queue ;Signature · 1 line
2.7.4
Re: [PATCH v2 1/2] perf cs-etm: Set branch instruction flags in packet
Quoted 125 lines · On Tue, 4 Dec 2018 at 23:26, <[email protected]> wrote:
Quoted 87 lines · Mathieu Poirier
Quoted 86 lines · Leo Yan
The perf sample data contains flags to indicate the hardware trace data is belonging to which type branch instruction, thus this can be used to print out the human readable string. Arm CoreSight ETM sample data is missed to set flags and it is always set to zeros, this results in perf tool skips to print string for instruction types.
Arm CoreSight ETM supports different kinds instruction of A64, A32 and T32; this patch is to set branch instruction flags in packet for these ISAs.
The brief idea for patch implementation is describe as below:
- For element with
OCSD_GEN_TRC_ELEM_TRACE_ONtype, it is taken as trace beginning packet; for element withOCSD_GEN_TRC_ELEM_NO_SYNCorOCSD_GEN_TRC_ELEM_EO_TRACE, these two kinds elements are used to set for trace end;As Mike suggested the packet stream might have more than one two
TRACE_ONpackets, the first oneTRACE_ONpacket indicates trace end and the second one is taken as trace restarting. We will handle this special case in the upper layer with packet queue handling, which has more context so it's more suitable fix up for it. This will be accomplished in the sequential patch.- For instruction range packet, mainly base on three factors to decide the branch instruction types:
elem->last_i_type
elem->last_i_subtype
elem->last_instr_condIf the instruction is immediate branch but without link and return flag, we consider it as function internal branch; in fact the immediate branch also can be used to invoke the function entry, usually this is only used in assembly code to directly call a symbol and don't expect to return back; after reviewing kernel normal functions and user space programs, both of them are very seldom to use immediate branch for function call. On the other hand, if we want to decide the immediate branch is for function branch jumping or for function calling, we need to rely on the start address of next packet and check the symbol offset for the start address, this will introduce much complexity in the implementation. So for this version we simply consider immediate branch as function internal branch. Moreover, we rely on '
elem->last_instr_cond' to decide if the branch instruction is a conditional branch or not.If the instruction is immediate branch with link, it's instruction 'BL' and which is used for function call.
If the instruction is indirect branch and with subtype
OCSD_S_INSTR_V7_IMPLIED_RET, the decoders gives the hint the function return for below cases related with A32/T32 instruction; set this branch flag as function return (Thanks for Al's suggestion).BX R14
MOV PC, LR
POP {…, PC}
LDR PC, [SP], #offsetIf the instruction is indirect branch without link, this is corresponding to instruction 'BR', this instruction usually is used for dynamic link lib with below usage; so we think it's a return instruction.
0000000000000680 <.plt>: 680: a9bf7bf0 stp x16, x30, [sp, #-16]! 684: 90000090 adrp x16, 10000 <__FRAME_END__+0xf630> 688: f947fe11 ldr x17, [x16, #4088] 68c: 913fe210 add x16, x16, #0xff8 690: d61f0220 br x17If the instruction is indirect branch with link, e.g BLR, we think it's a function call.
For function return, ARMv8 introduces a dedicated instruction 'ret', which has flag of
OCSD_S_INSTR_V8_RET.- For exception packets, this patch divides into three types:
The first type of exception is caused by external logics like bus, interrupt controller, debug module or PE reset or halt; this is corresponding to flags "bcyi" which defined in doc perf-script.txt;
The second type is for system call, this is set as "bcs" by following definition in the doc;
Quoted 7 lines
Quoted 3 lines
The third type is for CPU trap, data and instruction prefetch abort, alignment abort; usually these exceptions are synchronous for CPU, so set them as "bci" type.
This is too long and needs to be broken down into pieces. I would split this patch in 3 heat, one for
NO_SYNCandTRACE_ON, one forINSTR_RANGEand one for ELEM_EXCEPTION/ELEM_EXCEPTION_RET.This makes sense, will split to 3 patches.
Quoted 14 lines
Quoted 14 lines
Cc Mathieu Poirier <[email protected]>Cc Mike Leach <[email protected]>Cc Robert Walker <[email protected]>Cc Al Grant <[email protected]>Cc Andi Kleen <[email protected]>Cc Adrian Hunter <[email protected]>Cc Arnaldo Carvalho de Melo <[email protected]>Signed-off-by Leo Yan <[email protected]>--- tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 168 ++++++++++++++++++++++++ tools/perf/util/cs-etm-decoder/cs-etm-decoder.h | 1 + 2 files changed, 169 insertions(+)Quoted 11 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c cs_etm_decoder__buffer_packet(struct cs_etm_decoder *decoder, · line 306
Quoted 9 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +1
-0@@ -303,6 +303,7 @@ cs_etm_decoder__buffer_packet(struct cs_etm_decoder *decoder, decoder->packet_buffer[et].instr_count =0 ; decoder->packet_buffer[et].last_instr_taken_branch = false; decoder->packet_buffer[et].last_instr_size =0 ; + decoder->packet_buffer[et].flags =0 ;Since
PERF_IP_FLAG_BRANCHis '0', I would set this toUNINT32_MAX.
Quoted 4 lines
PERF_IP_FLAG_BRANCHis bit 0 is set (so it's 1) but not 0. If initialize value toUNINT32_MAX(0xFFFF,FFFF) that means all flags has been set and this will introduce confusion. So will keep to init flags to 0.
I just looked at this again - you are correct.
Quoted 203 lines
Quoted 82 lines
Quoted 82 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +74
-0if (decoder->packet_count ==MAX_BUFFER -1 )return OCSD_RESP_WAIT ;@@ -437,6 +438,171 @@ cs_etm_decoder__buffer_exception_ret(struct cs_etm_decoder *decoder, CS_ETM_EXCEPTION_RET); } +static void cs_etm_decoder__set_sample_flags ( +const void *context, +const ocsd_generic_trace_elem *elem) +{ +struct cs_etm_decoder *decoder = (struct cs_etm_decoder *) context; +struct cs_etm_packet *packet; +u32 exc_num; + + packet = &decoder->packet_buffer[decoder->tail]; + +switch (elem->elem_type) { +case OCSD_GEN_TRC_ELEM_TRACE_ON : + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_TRACE_BEGIN ; +break ; + +case OCSD_GEN_TRC_ELEM_NO_SYNC : +case OCSD_GEN_TRC_ELEM_EO_TRACE : + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_TRACE_END ; +break ; + +case OCSD_GEN_TRC_ELEM_INSTR_RANGE : +/* +* Immediate branch instruction without neither link nor +* return flag, it's normal branch instruction within +* the function. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR && + elem->last_i_subtype ==OCSD_S_INSTR_NONE ) { + packet->flags =PERF_IP_FLAG_BRANCH ; + +if (elem->last_instr_cond) + packet->flags |=PERF_IP_FLAG_CONDITIONAL ; + } + +/* +* Immediate branch instruction with link (e.g. BL), this is +* branch instruction for function call. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR && + elem->last_i_subtype ==OCSD_S_INSTR_BR_LINK ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL ; + +/* +* Indirect branch instruction with subtype of +* OCSD_S_INSTR_V7_IMPLIED_RET, this is explicit hint for +* function return for A32/T32. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_V7_IMPLIED_RET ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN ; + +/* +* Indirect branch instruction without link (e.g. BR), usually +* this is used for function return, especially for functions +* within dynamic link lib. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_NONE ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN ; + +/* +* Indirect branch instruction with link (e.g. BLR), this is +* branch instruction for function call. +*/ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_BR_LINK ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL ; +Quoted 8 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c cs_etm_decoder__buffer_exception_ret(struct cs_etm_decoder *decoder, · line 519
Quoted 5 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +5
-0+/* Return instruction for function return. */ +if (elem->last_i_type ==OCSD_INSTR_BR_INDIRECT && + elem->last_i_subtype ==OCSD_S_INSTR_V8_RET ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN ;I would swap the last to
if()condition so that the (BRANCH | RETURN) flags are all at the same place.Will follow this in new patch.
Quoted 12 lines
Quoted 12 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +12
-0+ +break ; + +case OCSD_GEN_TRC_ELEM_EXCEPTION : + +#define OCSD_EXC_RESET 0 +#define OCSD_EXC_DEBUG_HALT 1 +#define OCSD_EXC_CALL 2 +#define OCSD_EXC_TRAP 3 +#define OCSD_EXC_SYSTEM_ERROR 4 +#define OCSD_EXC_INST_DEBUG 6 +#define OCSD_EXC_DATA_DEBUG 7Quoted 8 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c cs_etm_decoder__buffer_exception_ret(struct cs_etm_decoder *decoder, · line 536
Quoted 5 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +5
-0+#define OCSD_EXC_ALIGNMENT 10 +#define OCSD_EXC_INST_FAULT 11 +#define OCSD_EXC_DATA_FAULT 12 +#define OCSD_EXC_IRQ 14 +#define OCSD_EXC_FIQ 15Where did you get the above? To me this is something that should come from the library.
The concept is coming from OpenCSD lib but OpenCSD doesn't define macros for them.
Will polish this and add these macros into OpenCSD header file.
Quoted 76 lines
Quoted 76 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +69
-0+ + exc_num = decoder->exc_num[packet->cpu]; + +/* +* The exceptions are triggered by external signals +* from bus, interrupt controller, debug module, +* PE reset or halt. +*/ +if (exc_num ==OCSD_EXC_RESET || + exc_num ==OCSD_EXC_DEBUG_HALT || + exc_num ==OCSD_EXC_SYSTEM_ERROR || + exc_num ==OCSD_EXC_INST_DEBUG || + exc_num ==OCSD_EXC_DATA_DEBUG || + exc_num ==OCSD_EXC_IRQ || + exc_num ==OCSD_EXC_FIQ ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL | +PERF_IP_FLAG_ASYNC | +PERF_IP_FLAG_INTERRUPT ; + +/* The exception is for system call. */ +if (exc_num ==OCSD_EXC_CALL ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL | +PERF_IP_FLAG_SYSCALLRET ; + +/* +* The exception is introduced by trap, instruction & +* data fault or alignment errors. +*/ +if (exc_num ==OCSD_EXC_TRAP || + exc_num ==OCSD_EXC_ALIGNMENT || + exc_num ==OCSD_EXC_INST_FAULT || + exc_num ==OCSD_EXC_DATA_FAULT ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_CALL | +PERF_IP_FLAG_INTERRUPT ; + +break ; + +case OCSD_GEN_TRC_ELEM_EXCEPTION_RET : + + exc_num = decoder->exc_num[packet->cpu]; + +if (exc_num ==OCSD_EXC_CALL ) + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN | +PERF_IP_FLAG_SYSCALLRET ; +else + packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_RETURN | +PERF_IP_FLAG_INTERRUPT ; + +break ; + +case OCSD_GEN_TRC_ELEM_UNKNOWN : +case OCSD_GEN_TRC_ELEM_PE_CONTEXT : +case OCSD_GEN_TRC_ELEM_ADDR_NACC : +case OCSD_GEN_TRC_ELEM_TIMESTAMP : +case OCSD_GEN_TRC_ELEM_CYCLE_COUNT : +case OCSD_GEN_TRC_ELEM_ADDR_UNKNOWN : +case OCSD_GEN_TRC_ELEM_EVENT : +case OCSD_GEN_TRC_ELEM_SWTRACE : +case OCSD_GEN_TRC_ELEM_CUSTOM : +default : +break ; + } +} + static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( const void *context, const ocsd_trc_index_t indx __maybe_unused,@@ -484,6 +650,8 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer(break ; }Quoted 7 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( · line 654
Quoted 2 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +2
-0+cs_etm_decoder__set_sample_flags (context, elem); +I was toying with the idea of setting the flags in each of the case statement found in
cs_etm_decoder__gen_trace_elem_printer(). But that would move more code around and the end result would be the same so let's keep it that way until we have a good reason to split it.
Quoted 7 lines
Do you sugguest to keep current implementation rather than to split flags setting in each of the case statement in
cs_etm_decoder__gen_trace_elem_printer()?I am not 100% sure if I understand correctly for "split it" (split flags setting vs split functions). So please correct me if I misunderstand this.
I find function cs_etm_decoder__set_sample_flags() overly long. Since the case statements in it are the same as the ones in cs_etm_decoder__gen_trace_elem_printer() a different way to proceed would be to do flag setting there rather than all in cs_etm_decoder__set_sample_flags(). But that would introduce more code modification and tighter coupling. Since I don't have another alternative I am suggesting to keep the current implementation.
Quoted 22 lines
Thanks,
Leo YanQuoted 18 lines
Quoted 18 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +0
-0return resp; }tools/perf/util/cs-etm-decoder/cs-etm-decoder.h +1
-1@@ -47,6 +47,7 @@ struct cs_etm_packet {u8 last_instr_taken_branch;u8 last_instr_size;int cpu; +u32 flags; };struct cs_etm_queue ; --2.7.4
Re: [PATCH v2 1/2] perf cs-etm: Set branch instruction flags in packet
On Wed, Dec 05, 2018 at 10:40:07AM -0700, Mathieu Poirier wrote:
[...]
Quoted 23 lines
Quoted 15 lines
Quoted 7 lines
Quoted 7 lines
static
ocsd_datapath_resp_tcs_etm_decoder__gen_trace_elem_printer(
const void *context,
constocsd_trc_index_tindx__maybe_unused,(quoted diff) +0
-0@@ -484,6 +650,8 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( break; }Quoted 7 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( · line 654
Quoted 2 lines
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +2
-0+cs_etm_decoder__set_sample_flags (context, elem); +I was toying with the idea of setting the flags in each of the case statement found in
cs_etm_decoder__gen_trace_elem_printer(). But that would move more code around and the end result would be the same so let's keep it that way until we have a good reason to split it.Quoted 7 lines
Do you sugguest to keep current implementation rather than to split flags setting in each of the case statement in
cs_etm_decoder__gen_trace_elem_printer()?I am not 100% sure if I understand correctly for "split it" (split flags setting vs split functions). So please correct me if I misunderstand this.
Quoted 7 lines
I find function
cs_etm_decoder__set_sample_flags()overly long. Since the case statements in it are the same as the ones incs_etm_decoder__gen_trace_elem_printer()a different way to proceed would be to do flag setting there rather than all incs_etm_decoder__set_sample_flags(). But that would introduce more code modification and tighter coupling. Since I don't have another alternative I am suggesting to keep the current implementation.
Thanks for clarification.
PATCH v2 2/2 perf cs-etm: Add support sample flags
In reply to Leo YanWe have prepared the flags in the packet structure, so need to copy the related value into sample structure thus perf tool can facilitate sample flags.
The PREV_PACKET contains the branch instruction flags and PACKET actually contains the flags for next branch instruction. So this patch is to set sample flags with 'etmq->prev_packet->flags'.
This patch includes three fixing up for sample flags based on the packets context:
- If the packet is exception packet or exception return packet, update the previous packet for exception specific flags;
- If there has TRACE_ON or TRACE_OFF packet in the middle of instruction packets, this indicates the trace is discontinuous, so append the flag PERF_IP_FLAG_TRACE_END to the previous packet to indicate the trace has been ended;
- If one instruction packet is behind TRACE_OFF packet, this instruction is restarting trace packet. So set flag PERF_IP_FLAG_TRACE_START to TRACE_OFF packet if one, this flag isn't used by TRACE_OFF packet but used to indicate trace restarting when generate sample.
--- tools/perf/util/cs-etm.c | 43 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 41 insertions(+), 2 deletions(-)
tools/perf/util/cs-etm.c +41 -2
@@ -676,7 +676,7 @@ static int cs_etm__synth_instruction_sample(struct cs_etm_queue *etmq, sample.stream_id = etmq->etm->instructions_id; sample.period = period; sample.cpu = etmq->packet->cpu; - sample.flags =0 ; + sample.flags = etmq->prev_packet->flags; sample.insn_len =1 ; sample.cpumode = event->sample.header.misc;
@@ -735,7 +735,7 @@ static int cs_etm__synth_branch_sample(struct cs_etm_queue *etmq) sample.stream_id = etmq->etm->branches_id; sample.period =1 ; sample.cpu = etmq->packet->cpu; - sample.flags =0 ; + sample.flags = etmq->prev_packet->flags; sample.cpumode = event->sample.header.misc;/*
@@ -878,6 +878,43 @@ static int cs_etm__synth_events(struct cs_etm_auxtrace *etm,return 0 ; } +static void cs_etm__fixup_flags (struct cs_etm_queue *etmq) +{ +/* +* Decoding stream might insert one TRACE_OFF packet in the +* middle of instruction packets, this means it doesn't +* contain the pair packets with TRACE_OFF and TRACE_ON. +* For this case, the instruction packet follows with +* TRACE_OFF packet so we need to fixup prev_packet with flag +* PERF_IP_FLAG_TRACE_BEGIN, this flag finally is used by the +* instruction packet to generate samples. +*/ +if (etmq->prev_packet->sample_type ==CS_ETM_TRACE_OFF && + etmq->packet->sample_type ==CS_ETM_RANGE ) + etmq->prev_packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_TRACE_BEGIN ; + +if (etmq->prev_packet->sample_type ==CS_ETM_RANGE ) { +/* +* When the exception packet is inserted, update flags +* so tell perf it is exception related branches. +*/ +if (etmq->packet->sample_type ==CS_ETM_EXCEPTION || + etmq->packet->sample_type ==CS_ETM_EXCEPTION_RET ) + etmq->prev_packet->flags = etmq->packet->flags; + +/* +* The trace is discontinuous, weather this is caused by +* TRACE_ON packet or TRACE_OFF packet is coming, if the +* previous packet is instruction packet, simply set flag +* PERF_IP_FLAG_TRACE_END for previous packet. +*/ +if (etmq->packet->sample_type ==CS_ETM_TRACE_ON || + etmq->packet->sample_type ==CS_ETM_TRACE_OFF ) + etmq->prev_packet->flags |=PERF_IP_FLAG_TRACE_END ; + } +} +static int cs_etm__sample (struct cs_etm_queue *etmq) {struct cs_etm_auxtrace *etm = etmq->etm;
@@ -1100,6 +1137,8 @@ static int cs_etm__run_decoder(struct cs_etm_queue *etmq)*/ break ; +cs_etm__fixup_flags (etmq); +switch (etmq->packet->sample_type) {case CS_ETM_RANGE :/*
Signature · 1 line
2.7.4
Re: [PATCH v2 2/2] perf cs-etm: Add support sample flags
Quoted 80 lines · Leo Yan
We have prepared the flags in the packet structure, so need to copy the related value into sample structure thus perf tool can facilitate sample flags.
The
PREV_PACKETcontains the branch instruction flags and PACKET actually contains the flags for next branch instruction. So this patch is to set sample flags with 'etmq->prev_packet->flags'.This patch includes three fixing up for sample flags based on the packets context:
- If the packet is exception packet or exception return packet, update the previous packet for exception specific flags;
- If there hasTRACE_ONorTRACE_OFFpacket in the middle of instruction packets, this indicates the trace is discontinuous, so append the flagPERF_IP_FLAG_TRACE_ENDto the previous packet to indicate the trace has been ended;
- If one instruction packet is behindTRACE_OFFpacket, this instruction is restarting trace packet. So set flagPERF_IP_FLAG_TRACE_STARTtoTRACE_OFFpacket if one, this flag isn't used byTRACE_OFFpacket but used to indicate trace restarting when generate sample.Signed-off-by Leo Yan <[email protected]>--- tools/perf/util/cs-etm.c | 43 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 41 insertions(+), 2 deletions(-)tools/perf/util/cs-etm.c +29
-2@@ -676,7 +676,7 @@ static int cs_etm__synth_instruction_sample(struct cs_etm_queue *etmq, sample.stream_id = etmq->etm->instructions_id; sample.period = period; sample.cpu = etmq->packet->cpu; - sample.flags =0 ; + sample.flags = etmq->prev_packet->flags; sample.insn_len =1 ; sample.cpumode = event->sample.header.misc;@@ -735,7 +735,7 @@ static int cs_etm__synth_branch_sample(struct cs_etm_queue *etmq) sample.stream_id = etmq->etm->branches_id; sample.period =1 ; sample.cpu = etmq->packet->cpu; - sample.flags =0 ; + sample.flags = etmq->prev_packet->flags; sample.cpumode = event->sample.header.misc;/* @@ -878,6 +878,43 @@ static int cs_etm__synth_events(struct cs_etm_auxtrace *etm,return 0 ; } +static void cs_etm__fixup_flags (struct cs_etm_queue *etmq) +{ +/* +* Decoding stream might insert one TRACE_OFF packet in the +* middle of instruction packets, this means it doesn't +* contain the pair packets with TRACE_OFF and TRACE_ON. +* For this case, the instruction packet follows with +* TRACE_OFF packet so we need to fixup prev_packet with flag +* PERF_IP_FLAG_TRACE_BEGIN, this flag finally is used by the +* instruction packet to generate samples. +*/ +if (etmq->prev_packet->sample_type ==CS_ETM_TRACE_OFF && + etmq->packet->sample_type ==CS_ETM_RANGE ) + etmq->prev_packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_TRACE_BEGIN ; + +if (etmq->prev_packet->sample_type ==CS_ETM_RANGE ) { +/* +* When the exception packet is inserted, update flags +* so tell perf it is exception related branches. +*/ +if (etmq->packet->sample_type ==CS_ETM_EXCEPTION || + etmq->packet->sample_type ==CS_ETM_EXCEPTION_RET ) + etmq->prev_packet->flags = etmq->packet->flags; + +/* +* The trace is discontinuous, weather this is caused by
tools/perf/util/cs-etm.c static int cs_etm__synth_events(struct cs_etm_auxtrace *etm, · line 917
Quoted 10 lines
tools/perf/util/cs-etm.c +10
-0+* TRACE_ON packet or TRACE_OFF packet is coming, if the +* previous packet is instruction packet, simply set flag +* PERF_IP_FLAG_TRACE_END for previous packet. +*/ +if (etmq->packet->sample_type ==CS_ETM_TRACE_ON || + etmq->packet->sample_type ==CS_ETM_TRACE_OFF ) + etmq->prev_packet->flags |=PERF_IP_FLAG_TRACE_END ; + } +} +
I think it would be better to keep all the flag related processing in cs-etm-decoder.c so that things in cs-etm.c are only concered with dealing with perf.
Look at function cs_etm__alloc_queue(), there you'll find "d_params.data = etmq".
In function cs_etm_decoder__new(), decoder->data = d_params->data;
This means that anywhere you have a decoder, decoder->data is an etmq. I've used this profusely in my work on CPU-wide trace scenarios. Because you're getting there ahead of me you'll need to fix the declaration of struct cs_etm_queue but that's easy.
Regards,
Mathieu
Quoted 15 lines
tools/perf/util/cs-etm.c +2
-0static int cs_etm__sample (struct cs_etm_queue *etmq) {struct cs_etm_auxtrace *etm = etmq->etm;@@ -1100,6 +1137,8 @@ static int cs_etm__run_decoder(struct cs_etm_queue *etmq)*/ break ; +cs_etm__fixup_flags (etmq); +switch (etmq->packet->sample_type) {case CS_ETM_RANGE :/* Signature · 1 line
2.7.4
Re: [PATCH v2 2/2] perf cs-etm: Add support sample flags
Quoted 97 lines · Mathieu Poirier
Quoted 80 lines · Leo Yan
We have prepared the flags in the packet structure, so need to copy the related value into sample structure thus perf tool can facilitate sample flags.
The
PREV_PACKETcontains the branch instruction flags and PACKET actually contains the flags for next branch instruction. So this patch is to set sample flags with 'etmq->prev_packet->flags'.This patch includes three fixing up for sample flags based on the packets context:
- If the packet is exception packet or exception return packet, update the previous packet for exception specific flags;
- If there hasTRACE_ONorTRACE_OFFpacket in the middle of instruction packets, this indicates the trace is discontinuous, so append the flagPERF_IP_FLAG_TRACE_ENDto the previous packet to indicate the trace has been ended;
- If one instruction packet is behindTRACE_OFFpacket, this instruction is restarting trace packet. So set flagPERF_IP_FLAG_TRACE_STARTtoTRACE_OFFpacket if one, this flag isn't used byTRACE_OFFpacket but used to indicate trace restarting when generate sample.Signed-off-by Leo Yan <[email protected]>--- tools/perf/util/cs-etm.c | 43 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 41 insertions(+), 2 deletions(-)tools/perf/util/cs-etm.c +29
-2@@ -676,7 +676,7 @@ static int cs_etm__synth_instruction_sample(struct cs_etm_queue *etmq, sample.stream_id = etmq->etm->instructions_id; sample.period = period; sample.cpu = etmq->packet->cpu; - sample.flags =0 ; + sample.flags = etmq->prev_packet->flags; sample.insn_len =1 ; sample.cpumode = event->sample.header.misc;@@ -735,7 +735,7 @@ static int cs_etm__synth_branch_sample(struct cs_etm_queue *etmq) sample.stream_id = etmq->etm->branches_id; sample.period =1 ; sample.cpu = etmq->packet->cpu; - sample.flags =0 ; + sample.flags = etmq->prev_packet->flags; sample.cpumode = event->sample.header.misc;/* @@ -878,6 +878,43 @@ static int cs_etm__synth_events(struct cs_etm_auxtrace *etm,return 0 ; } +static void cs_etm__fixup_flags (struct cs_etm_queue *etmq) +{ +/* +* Decoding stream might insert one TRACE_OFF packet in the +* middle of instruction packets, this means it doesn't +* contain the pair packets with TRACE_OFF and TRACE_ON. +* For this case, the instruction packet follows with +* TRACE_OFF packet so we need to fixup prev_packet with flag +* PERF_IP_FLAG_TRACE_BEGIN, this flag finally is used by the +* instruction packet to generate samples. +*/ +if (etmq->prev_packet->sample_type ==CS_ETM_TRACE_OFF && + etmq->packet->sample_type ==CS_ETM_RANGE ) + etmq->prev_packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_TRACE_BEGIN ; + +if (etmq->prev_packet->sample_type ==CS_ETM_RANGE ) { +/* +* When the exception packet is inserted, update flags +* so tell perf it is exception related branches. +*/ +if (etmq->packet->sample_type ==CS_ETM_EXCEPTION || + etmq->packet->sample_type ==CS_ETM_EXCEPTION_RET ) + etmq->prev_packet->flags = etmq->packet->flags; + +/* +* The trace is discontinuous, weather this is caused by tools/perf/util/cs-etm.c static int cs_etm__synth_events(struct cs_etm_auxtrace *etm, · line 917
Quoted 10 lines
tools/perf/util/cs-etm.c +10
-0+* TRACE_ON packet or TRACE_OFF packet is coming, if the +* previous packet is instruction packet, simply set flag +* PERF_IP_FLAG_TRACE_END for previous packet. +*/ +if (etmq->packet->sample_type ==CS_ETM_TRACE_ON || + etmq->packet->sample_type ==CS_ETM_TRACE_OFF ) + etmq->prev_packet->flags |=PERF_IP_FLAG_TRACE_END ; + } +} +I think it would be better to keep all the flag related processing in
cs-etm-decoder.cso that things incs-etm.care only concered with dealing with perf.
Quoted 8 lines
Look at function
cs_etm__alloc_queue(), there you'll find "d_params.data = etmq".In function
cs_etm_decoder__new(),decoder->data=d_params->data;This means that anywhere you have a decoder,
decoder->datais an etmq. I've used this profusely in my work on CPU-wide trace scenarios. Because you're getting there ahead of me you'll need to fix the declaration of structcs_etm_queuebut that's easy.
I've been thinking further about this and manipulating the etmq packet and prev_packet from the cs-etm-decoder.c won't work because all we have at that time is the decoder's packet queue. My goal is to manipulate the flags in only one place - either in cs-etm.c or cs-etm-decoder.c but not in both. It might be worth trying to do the implementation in cs-etm.c since there is already a lot of packet flow intelligence happening there.
Quoted 19 lines
Regards,
MathieuQuoted 15 lines
tools/perf/util/cs-etm.c +2
-1static int cs_etm__sample (struct cs_etm_queue *etmq) {struct cs_etm_auxtrace *etm = etmq->etm;@@ -1100,6 +1137,8 @@ static int cs_etm__run_decoder(struct cs_etm_queue *etmq)*/ break ; +cs_etm__fixup_flags (etmq); +switch (etmq->packet->sample_type) {case CS_ETM_RANGE :/* -- 2.7.4
Re: [PATCH v2 2/2] perf cs-etm: Add support sample flags
On Tue, Nov 20, 2018 at 09:53:41AM -0700, Mathieu Poirier wrote:
[...]
Quoted 51 lines
Quoted 42 lines
Quoted 27 lines
tools/perf/util/cs-etm.c +27
-0+static void cs_etm__fixup_flags (struct cs_etm_queue *etmq) +{ +/* +* Decoding stream might insert one TRACE_OFF packet in the +* middle of instruction packets, this means it doesn't +* contain the pair packets with TRACE_OFF and TRACE_ON. +* For this case, the instruction packet follows with +* TRACE_OFF packet so we need to fixup prev_packet with flag +* PERF_IP_FLAG_TRACE_BEGIN, this flag finally is used by the +* instruction packet to generate samples. +*/ +if (etmq->prev_packet->sample_type ==CS_ETM_TRACE_OFF && + etmq->packet->sample_type ==CS_ETM_RANGE ) + etmq->prev_packet->flags =PERF_IP_FLAG_BRANCH | +PERF_IP_FLAG_TRACE_BEGIN ; + +if (etmq->prev_packet->sample_type ==CS_ETM_RANGE ) { +/* +* When the exception packet is inserted, update flags +* so tell perf it is exception related branches. +*/ +if (etmq->packet->sample_type ==CS_ETM_EXCEPTION || + etmq->packet->sample_type ==CS_ETM_EXCEPTION_RET ) + etmq->prev_packet->flags = etmq->packet->flags; + +/* +* The trace is discontinuous, weather this is caused by tools/perf/util/cs-etm.c static int cs_etm__synth_events(struct cs_etm_auxtrace *etm, · line 917
Quoted 10 lines
tools/perf/util/cs-etm.c +10
-0+* TRACE_ON packet or TRACE_OFF packet is coming, if the +* previous packet is instruction packet, simply set flag +* PERF_IP_FLAG_TRACE_END for previous packet. +*/ +if (etmq->packet->sample_type ==CS_ETM_TRACE_ON || + etmq->packet->sample_type ==CS_ETM_TRACE_OFF ) + etmq->prev_packet->flags |=PERF_IP_FLAG_TRACE_END ; + } +} +I think it would be better to keep all the flag related processing in
cs-etm-decoder.cso that things incs-etm.care only concered with dealing with perf.Quoted 8 lines
Look at function
cs_etm__alloc_queue(), there you'll find "d_params.data = etmq".In function
cs_etm_decoder__new(),decoder->data=d_params->data;This means that anywhere you have a decoder,
decoder->datais an etmq. I've used this profusely in my work on CPU-wide trace scenarios. Because you're getting there ahead of me you'll need to fix the declaration of structcs_etm_queuebut that's easy.
Quoted 7 lines
I've been thinking further about this and manipulating the etmq packet and
prev_packetfrom thecs-etm-decoder.cwon't work because all we have at that time is the decoder's packet queue. My goal is to manipulate the flags in only one place - either incs-etm.corcs-etm-decoder.cbut not in both. It might be worth trying to do the implementation incs-etm.csince there is already a lot of packet flow intelligence happening there.
Agree. cs-etm.c has more context info than cs-etm-decoder.c, will try to refactor in single place in cs-etm.c.
[...]
Thanks,
Leo Yan