Skip to contentSkip to conversation

patch "tty: serial: 8250_mtk: always resume the device in probe." added to tty-linus

PATCH [email protected] 1 participant 1 message Dec 5, 2018

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

tty: serial: 8250_mtk: always resume the device in probe.

to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

Quoted 1 line

From 100bc3e2bebf95506da57cbdf5f26b25f6da4c81 Mon Sep 17 00:00:00 2001

From: Peter Shih <[email protected]>
Date: Tue, 27 Nov 2018 12:49:50 +0800
Subject: tty: serial: 8250_mtk: always resume the device in probe.

serial8250_register_8250_port calls uart_config_port, which calls config_port on the port before it tries to power on the port. So we need the port to be on before calling serial8250_register_8250_port. Change the code to always do a runtime resume in probe before registering port, and always do a runtime suspend in remove.

This basically reverts the change in commit 68e5fc4a255a ("tty: serial:
8250_mtk: use pm_runtime callbacks for enabling"), but still use pm_runtime callbacks.

Fixes 68e5fc4a255a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling")
Cc stable <[email protected]>
---
 drivers/tty/serial/8250/8250_mtk.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)
drivers/tty/serial/8250/8250_mtk.c +7 -9
index dd5e1cede2b5..c3f933d10295 100644
@@ -213,17 +213,17 @@ static int mtk8250_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
-	pm_runtime_enable(&pdev->dev);
-	if (!pm_runtime_enabled(&pdev->dev)) {
-		err = mtk8250_runtime_resume(&pdev->dev);
-		if (err)
-			return err;
-	}
+	err = mtk8250_runtime_resume(&pdev->dev);
+	if (err)
+		return err;
 
 	data->line = serial8250_register_8250_port(&uart);
 	if (data->line < 0)
 		return data->line;
 
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	return 0;
 }
 
@@ -234,13 +234,11 @@ static int mtk8250_remove(struct platform_device *pdev)
 	pm_runtime_get_sync(&pdev->dev);
 
 	serial8250_unregister_port(data->line);
+	mtk8250_runtime_suspend(&pdev->dev);
 
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
 
-	if (!pm_runtime_status_suspended(&pdev->dev))
-		mtk8250_runtime_suspend(&pdev->dev);
-
 	return 0;
 }
 
Signature · 1 line
2.19.2