Skip to contentSkip to conversation

xhci: remove the unused sw_lpm_support

PATCH New Mathias Nyman 1 participant 1 message Dec 7, 2018

Subsystems (2)
USB USB xHCI driver
lore
Share & tools
lore

Mathias Nyman

author
#0 lore raw

PATCH 1/8 xhci: remove the unused sw_lpm_support

From: Zeng Tao <[email protected]>

It is introduced for the pre-0.96 xHC controllers, and the driver only support HW LPM for 1.0 and later controllers.It's not actually used now and is thought not to be used in the future any more, so just remove it.

Signed-off-by Zeng Tao <[email protected]>
Signed-off-by Mathias Nyman <[email protected]>
---
 drivers/usb/host/xhci-mem.c | 20 ++++----------------
 drivers/usb/host/xhci.c     |  3 +--
 drivers/usb/host/xhci.h     |  2 --
 3 files changed, 5 insertions(+), 20 deletions(-)
drivers/usb/host/xhci-mem.c +4 -16
index b1f27aa..791c5d8 100644
@@ -2181,23 +2181,11 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 	if (major_revision < 0x03 && xhci->num_ext_caps < max_caps)
 		xhci->ext_caps[xhci->num_ext_caps++] = temp;
 
-	/* Check the host's USB2 LPM capability */
-	if ((xhci->hci_version == 0x96) && (major_revision != 0x03) &&
-			(temp & XHCI_L1C)) {
+	if ((xhci->hci_version >= 0x100) && (major_revision != 0x03) &&
+		 (temp & XHCI_HLC)) {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
-				"xHCI 0.96: support USB2 software lpm");
-		xhci->sw_lpm_support = 1;
-	}
-
-	if ((xhci->hci_version >= 0x100) && (major_revision != 0x03)) {
-		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
-				"xHCI 1.0: support USB2 software lpm");
-		xhci->sw_lpm_support = 1;
-		if (temp & XHCI_HLC) {
-			xhci_dbg_trace(xhci, trace_xhci_dbg_init,
-					"xHCI 1.0: support USB2 hardware lpm");
-			xhci->hw_lpm_support = 1;
-		}
+			       "xHCI 1.0: support USB2 hardware lpm");
+		xhci->hw_lpm_support = 1;
 	}
 
 	port_offset--;
drivers/usb/host/xhci.c +1 -2
index c928dbb..553e974 100644
@@ -4370,8 +4370,7 @@ static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	int		portnum = udev->portnum - 1;
 
-	if (hcd->speed >= HCD_USB3 || !xhci->sw_lpm_support ||
-			!udev->lpm_capable)
+	if (hcd->speed >= HCD_USB3 || !udev->lpm_capable)
 		return 0;
 
 	/* we only support lpm for non-hub device connected to root hub yet */
drivers/usb/host/xhci.h +0 -2
index 260b259..59b8562 100644
@@ -1858,8 +1858,6 @@ struct xhci_hcd {
 	struct xhci_port	*hw_ports;
 	struct xhci_hub		usb2_rhub;
 	struct xhci_hub		usb3_rhub;
-	/* support xHCI 0.96 spec USB2 software LPM */
-	unsigned		sw_lpm_support:1;
 	/* support xHCI 1.0 spec USB2 hardware LPM */
 	unsigned		hw_lpm_support:1;
 	/* cached usb2 extened protocol capabilites */