ARM: dts: vf610-zii-cfu1: Run I2C0 at 400 kHz
PATCH 1/1 ARM: dts: vf610-zii-cfu1: Run I2C0 at 400 kHz
All the I2C devices connected to the I2C0 bus are capable of running at 400kHz, so run it at a higher frequency.
--- arch/arm/boot/dts/vf610-zii-cfu1.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/vf610-zii-cfu1.dts +1 -1
@@ -207,7 +207,7 @@ }; &i2c0 { - clock-frequency = <100000>; + clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; status = "okay";
Signature · 7 lines
2.7.4 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 13 lines
All the I2C devices connected to the I2C0 bus are capable of running at 400kHz, so run it at a higher frequency.
Signed-off-by Fabio Estevam <[email protected]>--- arch/arm/boot/dts/vf610-zii-cfu1.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/vf610-zii-cfu1.dts +0
-0
arch/arm/boot/dts/vf610-zii-cfu1.dts line 211
Quoted 6 lines
arch/arm/boot/dts/vf610-zii-cfu1.dts +1
-1@@ -207,7 +207,7 @@ }; &i2c0 { - clock-frequency = <100000>; + clock-frequency = <400000>; pinctrl-names = "default";
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 4 lines · Fabio Estevam
All the I2C devices connected to the I2C0 bus are capable of running at 400kHz, so run it at a higher frequency.
Signed-off-by Fabio Estevam <[email protected]>
Applied, thanks.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel