Skip to contentSkip to conversation

ASoC: fsl-sai: Fix typo in "transmitter"

PATCH In review Fabio Estevam 2 participants 2 messages Dec 13, 2018

Subsystems (2)
Device tree bindings ASoC
lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH 1/1 ASoC: fsl-sai: Fix typo in "transmitter"

Fix the spelling of "transmitter".

Signed-off-by Fabio Estevam <[email protected]>
---
 Documentation/devicetree/bindings/sound/fsl-sai.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/sound/fsl-sai.txt +4 -4
index dd9e597..2e726b9 100644
@@ -35,13 +35,13 @@ Required properties:
 
   - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
 			  that SAI will work in the synchronous mode (sync Tx
-			  with Rx) which means both the transimitter and the
+			  with Rx) which means both the transmitter and the
 			  receiver will send and receive data by following
 			  receiver's bit clocks and frame sync clocks.
 
   - fsl,sai-asynchronous: This is a boolean property. If present, indicating
 			  that SAI will work in the asynchronous mode, which
-			  means both transimitter and receiver will send and
+			  means both transmitter and receiver will send and
 			  receive data by following their own bit clocks and
 			  frame sync clocks separately.
 

@@ -58,8 +58,8 @@ Optional properties (for mx6ul):
 Note:
 - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
   default synchronous mode (sync Rx with Tx) will be used, which means both
-  transimitter and receiver will send and receive data by following clocks
-  of transimitter.
+  transmitter and receiver will send and receive data by following clocks
+  of transmitter.
 - fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive.
 
 Example:
Signature · 1 line
2.7.4
maintainer
#1 lore raw

Applied "ASoC: fsl-sai: Fix typo in "transmitter"" to the asoc tree

The patch

ASoC: fsl-sai: Fix typo in "transmitter"

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From f0b3f8418711d2e482bd57d6c0b5790947ca6863 Mon Sep 17 00:00:00 2001

From: Fabio Estevam <[email protected]>
Date: Thu, 13 Dec 2018 08:36:38 -0200
Subject: [PATCH] ASoC: fsl-sai: Fix typo in "transmitter"

Fix the spelling of "transmitter".

Signed-off-by Fabio Estevam <[email protected]>
Signed-off-by Mark Brown <[email protected]>
---
 Documentation/devicetree/bindings/sound/fsl-sai.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/sound/fsl-sai.txt +4 -4
index dd9e59738e08..2e726b983845 100644
@@ -35,13 +35,13 @@ Required properties:
 
   - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
 			  that SAI will work in the synchronous mode (sync Tx
-			  with Rx) which means both the transimitter and the
+			  with Rx) which means both the transmitter and the
 			  receiver will send and receive data by following
 			  receiver's bit clocks and frame sync clocks.
 
   - fsl,sai-asynchronous: This is a boolean property. If present, indicating
 			  that SAI will work in the asynchronous mode, which
-			  means both transimitter and receiver will send and
+			  means both transmitter and receiver will send and
 			  receive data by following their own bit clocks and
 			  frame sync clocks separately.
 

@@ -58,8 +58,8 @@ Optional properties (for mx6ul):
 Note:
 - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
   default synchronous mode (sync Rx with Tx) will be used, which means both
-  transimitter and receiver will send and receive data by following clocks
-  of transimitter.
+  transmitter and receiver will send and receive data by following clocks
+  of transmitter.
 - fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive.
 
 Example:
Signature · 1 line
2.19.0.rc2