Skip to contentSkip to conversation

doc: add missing loopback option in testpmd guide

PATCH Applied Rami Rosen 3 participants 3 messages Jan 17, 2019

lore
Share & tools
lore

Rami Rosen

author
#0 lore raw

PATCH v2 1/1 doc: add missing loopback option in testpmd guide

This patch adds a missing topology "loop" mode for port-topology option in testpmd guide. The testpmd "loop" option (PORT_TOPOLOGY_LOOP) was added to testpmd parameter port-topology back in 2014, but it seems that it was never added to the testpmd guide. This patch adds it in the testpmd guide.

v2: Change "loopback" to "loop" (following Bernard review)

Fixes 3e2006d6186c ("app/testpmd: add loopback topology")
---
 doc/guides/testpmd_app_ug/run_app.rst | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
doc/guides/testpmd_app_ug/run_app.rst +3 -1
index f717bd3..ee51b1d 100644
@@ -196,7 +196,7 @@ The commandline options are:
 
 *   ``--port-topology=mode``
 
-    Set port topology, where mode is ``paired`` (the default) or ``chained``.
+    Set port topology, where mode is ``paired`` (the default), ``chained`` or ``loop``.
 
     In ``paired`` mode, the forwarding is between pairs of ports, for example: (0,1), (2,3), (4,5).
 
@@ -204,6 +204,8 @@ The commandline options are:
 
     The ordering of the ports can be changed using the portlist testpmd runtime function.
 
+    In ``loop`` mode, ingress traffic is simply transmitted back on the same interface.
+
 *   ``--forward-mode=mode``
 
     Set the forwarding mode where ``mode`` is one of the following::
Signature · 1 line
1.8.3.1
Acked-by on v2 1/1
#1 lore raw
Quoted 15 lines

-----Original Message-----
From: Rami Rosen [mailto:[email protected]]
Sent: Thursday, January 17, 2019 11:39 AM
To: [email protected]
Cc: [email protected]; Mcnamara, John <[email protected]>; Iremonger, Bernard <[email protected]>; Rami Rosen <[email protected]>
Subject: [PATCH V2] doc: add missing loopback option in testpmd guide

This patch adds a missing topology "loop" mode for port-topology option in testpmd guide. The testpmd "loop" option
(PORT_TOPOLOGY_LOOP) was added to testpmd parameter port-topology back in 2014, but it seems that it was never added to the testpmd guide. This patch adds it in the testpmd guide.

Quoted 5 lines

v2: Change "loopback" to "loop" (following Bernard review)

Fixes 3e2006d6186c ("app/testpmd: add loopback topology")
Applied
#2 lore raw
Quoted 15 lines · Bernard
Quoted 15 lines

-----Original Message-----
From: Rami Rosen [mailto:[email protected]]
Sent: Thursday, January 17, 2019 11:39 AM
To: [email protected]
Cc: [email protected]; Mcnamara, John <[email protected]>; Iremonger, Bernard <[email protected]>; Rami Rosen <[email protected]>
Subject: [PATCH V2] doc: add missing loopback option in testpmd guide

This patch adds a missing topology "loop" mode for port-topology option in testpmd guide. The testpmd "loop" option
(PORT_TOPOLOGY_LOOP) was added to testpmd parameter port-topology back in 2014, but it seems that it was never added to the testpmd guide. This patch adds it in the testpmd guide.

Quoted 7 lines
Quoted 5 lines

v2: Change "loopback" to "loop" (following Bernard review)

Fixes 3e2006d6186c ("app/testpmd: add loopback topology")

Applied to dpdk-next-net/master, thanks.