Skip to contentSkip to conversation

Use interconnect API in MDSS on SDM845

PATCH Superseded Jayant Shekhar 2 participants 5 messages Jan 23, 2019

Subsystems (5)

v6 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v6 cover Use interconnect API in MDSS on SDM845

The interconnect API provides an interface for consumer drivers to express their bandwidth needs in the SoC. This data is aggregated and the on-chip interconnect hardware is configured to the appropriate power/performance profile.

MDSS is one of the interconnect consumers which uses the interconnect APIs to get the path between endpoints and set its bandwidth requirements for the given interconnected path.

Subsequently, there is a clean up patch to remove all the references of the DPU custom bus scaling.

There is corresponding DT patch with the source and destination ports defined for display driver which will be sent separately.

Changes in v2:
- Remove error log and unnecessary check (Jordan Crouse)
- Fixed build error due to partial clean up

Changes in v3:
- Remove common property definitions (Rob Herring)
- Code clean up involving variable name change, removal of extra paranthesis and variables (Matthias Kaehlcke)
- Condense multiple lines into a single line (Sean Paul)

Changes in v4:
- Add comments, spacings, tabs, proper port name and icc macro
- Use port macros and change port string names (Georgi Djakov)

Changes in v5:
- Updated commit text and parenthesis alignment (Georgi Djakov)

Changes in v6:
- Change icc_set to icc_set_bw (Doug Anderson)

Jayant Shekhar (3):
drm/msm/dpu: clean up references of DPU custom bus scaling drm/msm/dpu: Integrate interconnect API in MDSS
dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on

    SDM845
 .../devicetree/bindings/display/msm/dpu.txt        |  10 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c      | 174 ++++++++-------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h      |   4 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c           |  13 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c           |  49 +++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c   |  47 ++----
 drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h   |  68 --------
 drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h          |  22 +--
 8 files changed, 144 insertions(+), 243 deletions(-)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#1 lore raw

PATCH v6 1/3 drm/msm/dpu: clean up references of DPU custom bus scaling

Since the upstream interconnect bus framework has landed upstream, the existing references of custom bus scaling needs to be cleaned up.

Changes in v2:
- Fixed build error due to partial clean up

Changes in v3:
- Condense multiple lines into a single line (Sean Paul)

Changes in v4:
- None

Changes in v5:
- None

Changes in v6:
- None

---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c    | 174 +++++++++--------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h    |   4 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c         |  13 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c |  47 ++----
 drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h |  68 ---------
 drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h        |  22 +--
 6 files changed, 89 insertions(+), 239 deletions(-)
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c +68 -106
index 22e84b3..c75536e 100644
@@ -84,7 +84,6 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
 		struct dpu_core_perf_params *perf)
 {
 	struct dpu_crtc_state *dpu_cstate;
-	int i;
 
 	if (!kms || !kms->catalog || !crtc || !state || !perf) {
 		DPU_ERROR("invalid parameters\n");
@@ -95,35 +94,24 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
 	memset(perf, 0, sizeof(struct dpu_core_perf_params));
 
 	if (!dpu_cstate->bw_control) {
-		for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
-			perf->bw_ctl[i] = kms->catalog->perf.max_bw_high *
+		perf->bw_ctl = kms->catalog->perf.max_bw_high *
 					1000ULL;
-			perf->max_per_pipe_ib[i] = perf->bw_ctl[i];
-		}
+		perf->max_per_pipe_ib = perf->bw_ctl;
 		perf->core_clk_rate = kms->perf.max_core_clk_rate;
 	} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
-		for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
-			perf->bw_ctl[i] = 0;
-			perf->max_per_pipe_ib[i] = 0;
-		}
+		perf->bw_ctl = 0;
+		perf->max_per_pipe_ib = 0;
 		perf->core_clk_rate = 0;
 	} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
-		for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
-			perf->bw_ctl[i] = kms->perf.fix_core_ab_vote;
-			perf->max_per_pipe_ib[i] = kms->perf.fix_core_ib_vote;
-		}
+		perf->bw_ctl = kms->perf.fix_core_ab_vote;
+		perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote;
 		perf->core_clk_rate = kms->perf.fix_core_clk_rate;
 	}
 
 	DPU_DEBUG(
-		"crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu llcc_ib=%llu llcc_ab=%llu mem_ib=%llu mem_ab=%llu\n",
+		"crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n",
 			crtc->base.id, perf->core_clk_rate,
-			perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MNOC],
-			perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC],
-			perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_LLCC],
-			perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC],
-			perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_EBI],
-			perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI]);
+			perf->max_per_pipe_ib, perf->bw_ctl);
 }
 
 int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
@@ -136,7 +124,6 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
 	struct dpu_crtc_state *dpu_cstate;
 	struct drm_crtc *tmp_crtc;
 	struct dpu_kms *kms;
-	int i;
 
 	if (!crtc || !state) {
 		DPU_ERROR("invalid crtc\n");
@@ -158,31 +145,25 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
 	/* obtain new values */
 	_dpu_core_perf_calc_crtc(kms, crtc, state, &dpu_cstate->new_perf);
 
-	for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC;
-			i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
-		bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl[i];
-		curr_client_type = dpu_crtc_get_client_type(crtc);
+	bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl;
+	curr_client_type = dpu_crtc_get_client_type(crtc);
 
-		drm_for_each_crtc(tmp_crtc, crtc->dev) {
-			if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) &&
-			    (dpu_crtc_get_client_type(tmp_crtc) ==
-					    curr_client_type) &&
-			    (tmp_crtc != crtc)) {
-				struct dpu_crtc_state *tmp_cstate =
-					to_dpu_crtc_state(tmp_crtc->state);
-
-				DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n",
-					tmp_crtc->base.id,
-					tmp_cstate->new_perf.bw_ctl[i],
-					tmp_cstate->bw_control);
-				/*
-				 * For bw check only use the bw if the
-				 * atomic property has been already set
-				 */
-				if (tmp_cstate->bw_control)
-					bw_sum_of_intfs +=
-						tmp_cstate->new_perf.bw_ctl[i];
-			}
+	drm_for_each_crtc(tmp_crtc, crtc->dev) {
+		if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) &&
+		    (dpu_crtc_get_client_type(tmp_crtc) ==
+				curr_client_type) && (tmp_crtc != crtc)) {
+			struct dpu_crtc_state *tmp_cstate =
+				to_dpu_crtc_state(tmp_crtc->state);
+
+			DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n",
+				tmp_crtc->base.id, tmp_cstate->new_perf.bw_ctl,
+				tmp_cstate->bw_control);
+			/*
+			 * For bw check only use the bw if the
+			 * atomic property has been already set
+			 */
+			if (tmp_cstate->bw_control)
+				bw_sum_of_intfs += tmp_cstate->new_perf.bw_ctl;
 		}
 
 		/* convert bandwidth to kb */
@@ -213,9 +194,9 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
 }
 
 static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
-		struct drm_crtc *crtc, u32 bus_id)
+		struct drm_crtc *crtc)
 {
-	struct dpu_core_perf_params perf = { { 0 } };
+	struct dpu_core_perf_params perf = { 0 };
 	enum dpu_crtc_client_type curr_client_type
 					= dpu_crtc_get_client_type(crtc);
 	struct drm_crtc *tmp_crtc;
@@ -228,13 +209,11 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
 				dpu_crtc_get_client_type(tmp_crtc)) {
 			dpu_cstate = to_dpu_crtc_state(tmp_crtc->state);
 
-			perf.max_per_pipe_ib[bus_id] =
-				max(perf.max_per_pipe_ib[bus_id],
-				dpu_cstate->new_perf.max_per_pipe_ib[bus_id]);
+			perf.max_per_pipe_ib = max(perf.max_per_pipe_ib,
+					dpu_cstate->new_perf.max_per_pipe_ib);
 
-			DPU_DEBUG("crtc=%d bus_id=%d bw=%llu\n",
-				tmp_crtc->base.id, bus_id,
-				dpu_cstate->new_perf.bw_ctl[bus_id]);
+			DPU_DEBUG("crtc=%d bw=%llu\n", tmp_crtc->base.id,
+					dpu_cstate->new_perf.bw_ctl);
 		}
 	}
 	return ret;
@@ -254,7 +233,6 @@ void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc)
 	struct dpu_crtc *dpu_crtc;
 	struct dpu_crtc_state *dpu_cstate;
 	struct dpu_kms *kms;
-	int i;
 
 	if (!crtc) {
 		DPU_ERROR("invalid crtc\n");
@@ -290,10 +268,8 @@ void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc)
 	if (kms->perf.enable_bw_release) {
 		trace_dpu_cmd_release_bw(crtc->base.id);
 		DPU_DEBUG("Release BW crtc=%d\n", crtc->base.id);
-		for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
-			dpu_crtc->cur_perf.bw_ctl[i] = 0;
-			_dpu_core_perf_crtc_update_bus(kms, crtc, i);
-		}
+		dpu_crtc->cur_perf.bw_ctl = 0;
+		_dpu_core_perf_crtc_update_bus(kms, crtc);
 	}
 }
 
@@ -336,11 +312,10 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 		int params_changed, bool stop_req)
 {
 	struct dpu_core_perf_params *new, *old;
-	int update_bus = 0, update_clk = 0;
+	bool update_bus = false, update_clk = false;
 	u64 clk_rate = 0;
 	struct dpu_crtc *dpu_crtc;
 	struct dpu_crtc_state *dpu_cstate;
-	int i;
 	struct msm_drm_private *priv;
 	struct dpu_kms *kms;
 	int ret;
@@ -367,62 +342,49 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 	new = &dpu_cstate->new_perf;
 
 	if (_dpu_core_perf_crtc_is_power_on(crtc) && !stop_req) {
-		for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
-			/*
-			 * cases for bus bandwidth update.
-			 * 1. new bandwidth vote - "ab or ib vote" is higher
-			 *    than current vote for update request.
-			 * 2. new bandwidth vote - "ab or ib vote" is lower
-			 *    than current vote at end of commit or stop.
-			 */
-			if ((params_changed && ((new->bw_ctl[i] >
-						old->bw_ctl[i]) ||
-				  (new->max_per_pipe_ib[i] >
-						old->max_per_pipe_ib[i]))) ||
-			    (!params_changed && ((new->bw_ctl[i] <
-						old->bw_ctl[i]) ||
-				  (new->max_per_pipe_ib[i] <
-						old->max_per_pipe_ib[i])))) {
-				DPU_DEBUG(
-					"crtc=%d p=%d new_bw=%llu,old_bw=%llu\n",
-					crtc->base.id, params_changed,
-					new->bw_ctl[i], old->bw_ctl[i]);
-				old->bw_ctl[i] = new->bw_ctl[i];
-				old->max_per_pipe_ib[i] =
-						new->max_per_pipe_ib[i];
-				update_bus |= BIT(i);
-			}
+		/*
+		 * cases for bus bandwidth update.
+		 * 1. new bandwidth vote - "ab or ib vote" is higher
+		 *    than current vote for update request.
+		 * 2. new bandwidth vote - "ab or ib vote" is lower
+		 *    than current vote at end of commit or stop.
+		 */
+		if ((params_changed && ((new->bw_ctl > old->bw_ctl) ||
+			(new->max_per_pipe_ib > old->max_per_pipe_ib)))	||
+			(!params_changed && ((new->bw_ctl < old->bw_ctl) ||
+			(new->max_per_pipe_ib < old->max_per_pipe_ib)))) {
+			DPU_DEBUG("crtc=%d p=%d new_bw=%llu,old_bw=%llu\n",
+				crtc->base.id, params_changed,
+				new->bw_ctl, old->bw_ctl);
+			old->bw_ctl = new->bw_ctl;
+			old->max_per_pipe_ib = new->max_per_pipe_ib;
+			update_bus = true;
 		}
 
 		if ((params_changed &&
-				(new->core_clk_rate > old->core_clk_rate)) ||
-				(!params_changed &&
-				(new->core_clk_rate < old->core_clk_rate))) {
+			(new->core_clk_rate > old->core_clk_rate)) ||
+			(!params_changed &&
+			(new->core_clk_rate < old->core_clk_rate))) {
 			old->core_clk_rate = new->core_clk_rate;
-			update_clk = 1;
+			update_clk = true;
 		}
 	} else {
 		DPU_DEBUG("crtc=%d disable\n", crtc->base.id);
 		memset(old, 0, sizeof(*old));
 		memset(new, 0, sizeof(*new));
-		update_bus = ~0;
-		update_clk = 1;
+		update_bus = true;
+		update_clk = true;
 	}
-	trace_dpu_perf_crtc_update(crtc->base.id,
-				new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC],
-				new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC],
-				new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI],
-				new->core_clk_rate, stop_req,
-				update_bus, update_clk);
-
-	for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
-		if (update_bus & BIT(i)) {
-			ret = _dpu_core_perf_crtc_update_bus(kms, crtc, i);
-			if (ret) {
-				DPU_ERROR("crtc-%d: failed to update bw vote for bus-%d\n",
-					  crtc->base.id, i);
-				return ret;
-			}
+
+	trace_dpu_perf_crtc_update(crtc->base.id, new->bw_ctl,
+		new->core_clk_rate, stop_req, update_bus, update_clk);
+
+	if (update_bus) {
+		ret = _dpu_core_perf_crtc_update_bus(kms, crtc);
+		if (ret) {
+			DPU_ERROR("crtc-%d: failed to update bus bw vote\n",
+				  crtc->base.id);
+			return ret;
 		}
 	}
 
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h +2 -2
index fbcbe0c..0fb2769 100644
@@ -30,8 +30,8 @@
  * @core_clk_rate: core clock rate request
  */
 struct dpu_core_perf_params {
-	u64 max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MAX];
-	u64 bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MAX];
+	u64 max_per_pipe_ib;
+	u64 bw_ctl;
 	u64 core_clk_rate;
 };
 
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c +3 -10
index d27ea2a..d34ec9f 100644
@@ -1389,21 +1389,14 @@ static int dpu_crtc_debugfs_state_show(struct seq_file *s, void *v)
 {
 	struct drm_crtc *crtc = (struct drm_crtc *) s->private;
 	struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
-	int i;
 
 	seq_printf(s, "client type: %d\n", dpu_crtc_get_client_type(crtc));
 	seq_printf(s, "intf_mode: %d\n", dpu_crtc_get_intf_mode(crtc));
 	seq_printf(s, "core_clk_rate: %llu\n",
 			dpu_crtc->cur_perf.core_clk_rate);
-	for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC;
-			i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
-		seq_printf(s, "bw_ctl[%s]: %llu\n",
-				dpu_power_handle_get_dbus_name(i),
-				dpu_crtc->cur_perf.bw_ctl[i]);
-		seq_printf(s, "max_per_pipe_ib[%s]: %llu\n",
-				dpu_power_handle_get_dbus_name(i),
-				dpu_crtc->cur_perf.max_per_pipe_ib[i]);
-	}
+	seq_printf(s, "bw_ctl: %llu\n", dpu_crtc->cur_perf.bw_ctl);
+	seq_printf(s, "max_per_pipe_ib: %llu\n",
+				dpu_crtc->cur_perf.max_per_pipe_ib);
 
 	return 0;
 }
drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c +9 -38

75 lines not on this page · raw message

drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h +0 -68

117 lines not on this page · raw message

drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h +7 -15
index 0c122e1..7c8a92d 100644
@@ -167,16 +167,12 @@
 )
 
 TRACE_EVENT(dpu_perf_crtc_update,
-	TP_PROTO(u32 crtc, u64 bw_ctl_mnoc, u64 bw_ctl_llcc,
-			u64 bw_ctl_ebi, u32 core_clk_rate,
-			bool stop_req, u32 update_bus, u32 update_clk),
-	TP_ARGS(crtc, bw_ctl_mnoc, bw_ctl_llcc, bw_ctl_ebi, core_clk_rate,
-		stop_req, update_bus, update_clk),
+	TP_PROTO(u32 crtc, u64 bw_ctl, u32 core_clk_rate,
+			bool stop_req, bool update_bus, bool update_clk),
+	TP_ARGS(crtc, bw_ctl, core_clk_rate, stop_req, update_bus, update_clk),
 	TP_STRUCT__entry(
 			__field(u32, crtc)
-			__field(u64, bw_ctl_mnoc)
-			__field(u64, bw_ctl_llcc)
-			__field(u64, bw_ctl_ebi)
+			__field(u64, bw_ctl)
 			__field(u32, core_clk_rate)
 			__field(bool, stop_req)
 			__field(u32, update_bus)
@@ -184,20 +180,16 @@
 	),
 	TP_fast_assign(
 			__entry->crtc = crtc;
-			__entry->bw_ctl_mnoc = bw_ctl_mnoc;
-			__entry->bw_ctl_llcc = bw_ctl_llcc;
-			__entry->bw_ctl_ebi = bw_ctl_ebi;
+			__entry->bw_ctl = bw_ctl;
 			__entry->core_clk_rate = core_clk_rate;
 			__entry->stop_req = stop_req;
 			__entry->update_bus = update_bus;
 			__entry->update_clk = update_clk;
 	),
 	 TP_printk(
-		"crtc=%d bw_mnoc=%llu bw_llcc=%llu bw_ebi=%llu clk_rate=%u stop_req=%d u_bus=%d u_clk=%d",
+		"crtc=%d bw_ctl=%llu clk_rate=%u stop_req=%d u_bus=%d u_clk=%d",
 			__entry->crtc,
-			__entry->bw_ctl_mnoc,
-			__entry->bw_ctl_llcc,
-			__entry->bw_ctl_ebi,
+			__entry->bw_ctl,
 			__entry->core_clk_rate,
 			__entry->stop_req,
 			__entry->update_bus,
Signature · 7 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/freedreno
#2 lore raw

PATCH v6 2/3 drm/msm/dpu: Integrate interconnect API in MDSS

In reply to Jayant Shekhar

The interconnect framework is designed to provide a standard kernel interface to control the settings of the interconnects on a SoC.

The interconnect API uses a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers.

MDSS is one of the interconnect consumers which uses the interconnect APIs to get the path between endpoints and set its bandwidth requirement for the given interconnected path.

Changes in v2:
- Remove error log and unnecessary check (Jordan Crouse)

Changes in v3:
- Code clean involving variable name change, removal of extra paranthesis and variables (Matthias Kaehlcke)

Changes in v4:
- Add comments, spacings, tabs, proper port name and icc macro (Georgi Djakov)

Changes in v5:
- Commit text and parenthesis alignment (Georgi Djakov)

Changes in v6:
- Change to new icc_set API's (Doug Anderson)

---
 drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 +++++++++++++++++++++++++++++---
 1 file changed, 45 insertions(+), 4 deletions(-)
drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +45 -4
index 38576f8..38daf8a 100644
@@ -4,11 +4,15 @@
  */
 
 #include "dpu_kms.h"
+#include <linux/interconnect.h>
 
 #define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
 
 #define HW_INTR_STATUS			0x0010
 
+/* Max BW defined in KBps */
+#define MAX_BW				6800000
+
 struct dpu_mdss {
 	struct msm_mdss base;
 	void __iomem *mmio;
@@ -16,8 +20,30 @@ struct dpu_mdss {
 	u32 hwversion;
 	struct dss_module_power mp;
 	struct dpu_irq_controller irq_controller;
+	struct icc_path *path[2];
+	u32 num_paths;
 };
 
+static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
+						struct dpu_mdss *dpu_mdss)
+{
+	struct icc_path *path0 = of_icc_get(dev->dev, "mdp0-mem");
+	struct icc_path *path1 = of_icc_get(dev->dev, "mdp1-mem");
+
+	if (IS_ERR(path0))
+		return PTR_ERR(path0);
+
+	dpu_mdss->path[0] = path0;
+	dpu_mdss->num_paths = 1;
+
+	if (!IS_ERR(path1)) {
+		dpu_mdss->path[1] = path1;
+		dpu_mdss->num_paths++;
+	}
+
+	return 0;
+}
+
 static irqreturn_t dpu_mdss_irq(int irq, void *arg)
 {
 	struct dpu_mdss *dpu_mdss = arg;
@@ -127,7 +153,11 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
 {
 	struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
 	struct dss_module_power *mp = &dpu_mdss->mp;
-	int ret;
+	int ret, i;
+	u64 avg_bw = dpu_mdss->num_paths ? MAX_BW / dpu_mdss->num_paths : 0;
+
+	for (i = 0; i < dpu_mdss->num_paths; i++)
+		icc_set_bw(dpu_mdss->path[i], avg_bw, kBps_to_icc(MAX_BW));
 
 	ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
 	if (ret)
@@ -140,12 +170,15 @@ static int dpu_mdss_disable(struct msm_mdss *mdss)
 {
 	struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
 	struct dss_module_power *mp = &dpu_mdss->mp;
-	int ret;
+	int ret, i;
 
 	ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
 	if (ret)
 		DPU_ERROR("clock disable failed, ret:%d\n", ret);
 
+	for (i = 0; i < dpu_mdss->num_paths; i++)
+		icc_set_bw(dpu_mdss->path[i], 0, 0);
+
 	return ret;
 }
 
@@ -155,6 +188,7 @@ static void dpu_mdss_destroy(struct drm_device *dev)
 	struct msm_drm_private *priv = dev->dev_private;
 	struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss);
 	struct dss_module_power *mp = &dpu_mdss->mp;
+	int i;
 
 	pm_runtime_disable(dev->dev);
 	_dpu_mdss_irq_domain_fini(dpu_mdss);
@@ -162,6 +196,9 @@ static void dpu_mdss_destroy(struct drm_device *dev)
 	msm_dss_put_clk(mp->clk_config, mp->num_clk);
 	devm_kfree(&pdev->dev, mp->clk_config);
 
+	for (i = 0; i < dpu_mdss->num_paths; i++)
+		icc_put(dpu_mdss->path[i]);
+
 	if (dpu_mdss->mmio)
 		devm_iounmap(&pdev->dev, dpu_mdss->mmio);
 	dpu_mdss->mmio = NULL;
@@ -200,6 +237,10 @@ int dpu_mdss_init(struct drm_device *dev)
 	}
 	dpu_mdss->mmio_len = resource_size(res);
 
+	ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
+	if (ret)
+		return ret;
+
 	mp = &dpu_mdss->mp;
 	ret = msm_dss_parse_clock(pdev, mp);
 	if (ret) {
@@ -221,14 +262,14 @@ int dpu_mdss_init(struct drm_device *dev)
 		goto irq_error;
 	}
 
+	priv->mdss = &dpu_mdss->base;
+
 	pm_runtime_enable(dev->dev);
 
 	pm_runtime_get_sync(dev->dev);
 	dpu_mdss->hwversion = readl_relaxed(dpu_mdss->mmio);
 	pm_runtime_put_sync(dev->dev);
 
-	priv->mdss = &dpu_mdss->base;
-
 	return ret;
 
 irq_error:
Signature · 7 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/freedreno
Reviewed-by on v6 2/3
#3 lore raw

Re: [v6 2/3] drm/msm/dpu: Integrate interconnect API in MDSS

Quoted 25 lines · Jayant Shekhar

The interconnect framework is designed to provide a standard kernel interface to control the settings of the interconnects on a SoC.

The interconnect API uses a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers.

MDSS is one of the interconnect consumers which uses the interconnect APIs to get the path between endpoints and set its bandwidth requirement for the given interconnected path.

Changes in v2:
- Remove error log and unnecessary check (Jordan Crouse)

Changes in v3:
- Code clean involving variable name change, removal of extra paranthesis and variables (Matthias Kaehlcke)

Changes in v4:
- Add comments, spacings, tabs, proper port name and icc macro (Georgi Djakov)

Quoted 7 lines

Changes in v5:
- Commit text and parenthesis alignment (Georgi Djakov)

Changes in v6:
- Change to new icc_set API's (Doug Anderson)

...weird that there's a 1 in your name.

Quoted 1 line

_______________________________________________
Freedreno mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/freedreno

#4 lore raw

PATCH v6 3/3 dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845

In reply to Jayant Shekhar

Add interconnect properties such as interconnect provider specifier , the edge source and destination ports which are required by the interconnect API to configure interconnect path for MDSS.

Changes in v2:
- none

Changes in v3:
- Remove common property definitions (Rob Herring)

Changes in v4:
- Use port macros and change port string names (Georgi Djakov)

Changes in v5:
- None

Changes in v6:
- None

---
 Documentation/devicetree/bindings/display/msm/dpu.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)
Documentation/devicetree/bindings/display/msm/dpu.txt +10 -0
index ad2e883..a61dd40 100644
@@ -28,6 +28,11 @@ Required properties:
 - #address-cells: number of address cells for the MDSS children. Should be 1.
 - #size-cells: Should be 1.
 - ranges: parent bus address space is the same as the child bus address space.
+- interconnects : interconnect path specifier for MDSS according to
+  Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be
+  2 paths corresponding to 2 AXI ports.
+- interconnect-names : MDSS will have 2 port names to differentiate between the
+  2 interconnect paths defined with interconnect specifier.
 
 Optional properties:
 - assigned-clocks: list of clock specifiers for clocks needing rate assignment
@@ -86,6 +91,11 @@ Example:
 		interrupt-controller;
 		#interrupt-cells = <1>;
 
+		interconnects = <&rsc_hlos MASTER_MDP0 &rsc_hlos SLAVE_EBI1>,
+				<&rsc_hlos MASTER_MDP1 &rsc_hlos SLAVE_EBI1>;
+
+		interconnect-names = "mdp0-mem", "mdp1-mem";
+
 		iommus = <&apps_iommu 0>;
 
 		#address-cells = <2>;
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project