reset: Add Broadcom STB SW_INIT reset controller driver
Subsystems (2)
PATCH 1/1 reset: Add Broadcom STB SW_INIT reset controller driver
Add support for resetting blocks through the Linux reset controller subsystem when reset lines are provided through a SW_INIT-style reset controller on Broadcom STB SoCs.
Signed-off-by Florian Fainelli <[email protected]>
Signed-off-by Philipp Zabel <[email protected]>
---
Philipp,
This is a replacement patch for what is currently in your reset/next branch.
Thank you!
drivers/reset/Kconfig | 8 +++ drivers/reset/Makefile | 1 + drivers/reset/reset-brcmstb.c | 132 ++++++++++++++++++++++++++++++++++ 3 files changed, 141 insertions(+) create mode 100644 drivers/reset/reset-brcmstb.c
drivers/reset/Kconfig +8 -0
@@ -40,6 +40,14 @@ config RESET_BERLIN help This enables the reset controller driver for Marvell Berlin SoCs. +config RESET_BRCMSTB + tristate "Broadcom STB reset controller" + depends on ARCH_BRCMSTB || COMPILE_TEST + default ARCH_BRCMSTB + help + This enables the reset controller driver for Broadcom STB SoCs using + a SUN_TOP_CTRL_SW_INIT style controller. + config RESET_HSDK bool "Synopsys HSDK Reset Driver" depends on HAS_IOMEM
drivers/reset/Makefile +1 -0
@@ -7,6 +7,7 @@ obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o obj-$(CONFIG_RESET_ATH79) += reset-ath79.o obj-$(CONFIG_RESET_AXS10X) += reset-axs10x.o obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o +obj-$(CONFIG_RESET_BRCMSTB) += reset-brcmstb.o obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o obj-$(CONFIG_RESET_IMX7) += reset-imx7.o obj-$(CONFIG_RESET_LANTIQ) += reset-lantiq.o
drivers/reset/reset-brcmstb.c new file +132 -0
132 lines not on this page · raw message
Signature · 1 line
2.17.1
Hi Florian,
Quoted 6 lines · Florian Fainelli
Add support for resetting blocks through the Linux reset controller subsystem when reset lines are provided through a SW_INIT-style reset controller on Broadcom STB SoCs.
Signed-off-by Florian Fainelli <[email protected]>Signed-off-by Philipp Zabel <[email protected]>
Quoted 7 lines
---
Philipp,This is a replacement patch for what is currently in your reset/next branch.
Thank you!
Applied to reset/next, thank you.
regards
Philipp