async: Add cmdline option to specify drivers to be async probed
RFC PATCH v2 1/1 async: Add cmdline option to specify drivers to be async probed
Asynchronous driver probing can help much on kernel fastboot, and this option can provide a flexible way to optimize and quickly verify async driver probe.
Also it will help in below cases:
* Some driver actually covers several families of HWs, some of which could use async probing while others don't. So we can't simply turn on the PROBE_PREFER_ASYNCHRONOUS flag in driver, but use this cmdline option, like igb driver async patch discussed at
https://www.spinics.net/lists/netdev/msg545986.html
* For SOC (System on Chip) with multiple spi or i2c controllers, most of the slave spi/i2c devices will be assigned with fixed controller number, while async probing may make those controllers get different index for each boot, which prevents those controller drivers to be async probed. For platforms not using these spi/i2c slave devices, they can use this cmdline option to benefit from the async probing.
--- drivers/base/dd.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
drivers/base/dd.c +23 -0
@@ -57,6 +57,10 @@ static atomic_t deferred_trigger_count = ATOMIC_INIT(0);static struct dentry *deferred_devices;static bool initcalls_done; +/* Save the async probe drivers' name from kernel cmdline */ +#define ASYNC_DRV_NAMES_MAX_LEN 256 +static char async_probe_drv_names[ASYNC_DRV_NAMES_MAX_LEN ]; +/* * In some cases, like suspend to RAM or hibernation, It might be reasonable * to prohibit probing of devices as it could be unsafe.
@@ -674,8 +678,27 @@ int driver_probe_device(struct device_driver *drv, struct device *dev)return ret; } +static inline bool cmdline_requested_async_probing (const char *drv_name) +{ +return parse_option_str (async_probe_drv_names, drv_name); +} + +/* The format is like driver_async_probe=drv_name1,drv_name2,drv_name3 */ +static int __init save_async_options (char *buf) +{ +if (strlen (buf) >=ASYNC_DRV_NAMES_MAX_LEN ) +printk (KERN_WARNING "Too long list for async_probe_drv_names!" ); + +strlcpy (async_probe_drv_names, buf,ASYNC_DRV_NAMES_MAX_LEN ); +return 0 ; +} +__setup ("driver_async_probe=" , save_async_options); +bool driver_allows_async_probing (struct device_driver *drv) { +if (cmdline_requested_async_probing (drv->name)) +return true; +switch (drv->probe_type) {case PROBE_PREFER_ASYNCHRONOUS :return true;
Signature · 1 line
2.7.4
Quoted 54 lines · Feng Tang
Asynchronous driver probing can help much on kernel fastboot, and this option can provide a flexible way to optimize and quickly verify async driver probe.
Also it will help in below cases:
* Some driver actually covers several families of HWs, some of which could use async probing while others don't. So we can't simply turn on thePROBE_PREFER_ASYNCHRONOUSflag in driver, but use this cmdline option, like igb driver async patch discussed at
https://www.spinics.net/lists/netdev/msg545986.html* For SOC (System on Chip) with multiple spi or i2c controllers, most of the slave spi/i2c devices will be assigned with fixed controller number, while async probing may make those controllers get different index for each boot, which prevents those controller drivers to be async probed. For platforms not using these spi/i2c slave devices, they can use this cmdline option to benefit from the async probing.
Suggested-by Alexander Duyck <[email protected]>Signed-off-by Feng Tang <[email protected]>--- drivers/base/dd.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)drivers/base/dd.c +15
-0@@ -57,6 +57,10 @@ static atomic_t deferred_trigger_count = ATOMIC_INIT(0);static struct dentry *deferred_devices;static bool initcalls_done; +/* Save the async probe drivers' name from kernel cmdline */ +#define ASYNC_DRV_NAMES_MAX_LEN 256 +static char async_probe_drv_names[ASYNC_DRV_NAMES_MAX_LEN ]; +/* * In some cases, like suspend to RAM or hibernation, It might be reasonable * to prohibit probing of devices as it could be unsafe. @@ -674,8 +678,27 @@ int driver_probe_device(struct device_driver *drv, struct device *dev)return ret; } +static inline bool cmdline_requested_async_probing (const char *drv_name) +{ +return parse_option_str (async_probe_drv_names, drv_name); +} + +/* The format is like driver_async_probe=drv_name1,drv_name2,drv_name3 */ +static int __init save_async_options (char *buf) +{ +if (strlen (buf) >=ASYNC_DRV_NAMES_MAX_LEN ) +printk (KERN_WARNING "Too long list for async_probe_drv_names!" ); +
drivers/base/dd.c int driver_probe_device(struct device_driver *drv, struct device *dev) · line 701
Quoted 10 lines
drivers/base/dd.c +8
-0+strlcpy (async_probe_drv_names, buf,ASYNC_DRV_NAMES_MAX_LEN ); +return 0 ; +} +__setup ("driver_async_probe=" , save_async_options); +bool driver_allows_async_probing (struct device_driver *drv) { +if (cmdline_requested_async_probing (drv->name)) +return true; +
This piece still should be moved. Ideally it should be down in the "default" case area we use to determine if the module parameter async_probe was used or not. Where you currently have this will overrride the driver behavior if it absolutely cannot use an asynchronous probe.
Quoted 3 lines
drivers/base/dd.c +0
-0switch (drv->probe_type) {case PROBE_PREFER_ASYNCHRONOUS :return true;
Hi Alexander,
Thanks for the review.
Quoted 63 lines · Alexander Duyck
Quoted 62 lines · Feng Tang
Asynchronous driver probing can help much on kernel fastboot, and this option can provide a flexible way to optimize and quickly verify async driver probe.
Also it will help in below cases:
* Some driver actually covers several families of HWs, some of which could use async probing while others don't. So we can't simply turn on thePROBE_PREFER_ASYNCHRONOUSflag in driver, but use this cmdline option, like igb driver async patch discussed at
https://www.spinics.net/lists/netdev/msg545986.html* For SOC (System on Chip) with multiple spi or i2c controllers, most of the slave spi/i2c devices will be assigned with fixed controller number, while async probing may make those controllers get different index for each boot, which prevents those controller drivers to be async probed. For platforms not using these spi/i2c slave devices, they can use this cmdline option to benefit from the async probing.
Suggested-by Alexander Duyck <[email protected]>Signed-off-by Feng Tang <[email protected]>--- drivers/base/dd.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)drivers/base/dd.c +21
-0@@ -57,6 +57,10 @@ static atomic_t deferred_trigger_count = ATOMIC_INIT(0);static struct dentry *deferred_devices;static bool initcalls_done; +/* Save the async probe drivers' name from kernel cmdline */ +#define ASYNC_DRV_NAMES_MAX_LEN 256 +static char async_probe_drv_names[ASYNC_DRV_NAMES_MAX_LEN ]; +/* * In some cases, like suspend to RAM or hibernation, It might be reasonable * to prohibit probing of devices as it could be unsafe. @@ -674,8 +678,27 @@ int driver_probe_device(struct device_driver *drv, struct device *dev)return ret; } +static inline bool cmdline_requested_async_probing (const char *drv_name) +{ +return parse_option_str (async_probe_drv_names, drv_name); +} + +/* The format is like driver_async_probe=drv_name1,drv_name2,drv_name3 */ +static int __init save_async_options (char *buf) +{ +if (strlen (buf) >=ASYNC_DRV_NAMES_MAX_LEN ) +printk (KERN_WARNING "Too long list for async_probe_drv_names!" ); + +strlcpy (async_probe_drv_names, buf,ASYNC_DRV_NAMES_MAX_LEN ); +return 0 ; +} +__setup ("driver_async_probe=" , save_async_options); +bool driver_allows_async_probing (struct device_driver *drv) { +if (cmdline_requested_async_probing (drv->name))
Quoted 8 lines
drivers/base/dd.c int driver_probe_device(struct device_driver *drv, struct device *dev) · line 701
Quoted 2 lines
drivers/base/dd.c +2
-0+return true; +This piece still should be moved. Ideally it should be down in the "default" case area we use to determine if the module parameter
async_probewas used or not. Where you currently have this will overrride the driver behavior if it absolutely cannot use an asynchronous probe.
I thought this option could also be used as a flexible option to test and try some drivers what we used to think not appropriate for async probing (including drivers with PROBE_FORCE_SYNCHRONOUS flag). But if people think we should enforce this PROBE_FORCE_SYNCHRONOUS check, I can move the cmdline_requested_async_probing() check into the "default:" segment.
Thanks,
Feng