Skip to contentSkip to conversation

mx6sabre: Add DM and SPL FIT support

PATCH Superseded Abel Vesa 5 participants 44 messages Jan 29, 2019 – Jan 30, 2019

Subsystems (7)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Abel Vesa

author
#0 lore raw

v2 cover mx6sabre: Add DM and SPL FIT support

The first version is here:
https://lists.denx.de/pipermail/u-boot/2019-January/355196.html

Changes since v1:
* updated all the related dts[i] files from kernel v4.20 as suggested by Fabio
* enabled multi-dtb in SPL to support one binary for all imx6[q|qp|dl]
* updated the board README files
* dropped support for EFI and DOS partition to decrease SPL size on sabresd

Abel Vesa (22):
usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
usb: ehci-mx6: Make regulator DM_REGULATOR dependent
configs: imx6sabreauto: Add DM_MMC support
configs: imx6sabreauto: Add DM_USB support
mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
board: mx6sabresd: Add board_fit_config_name_match to support FIT in
SPL
board: mx6sabreauto: Add board_fit_config_name_match to support FIT in
SPL
arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
arm: imx: Add FIT SPL its
configs: mx6sabreauto: Add SPL FIT and DM support
configs: mx6sabresd: Add SPL FIT and DM support
mx6sabreauto: Add DM_GPIO support
mx6sabresd: Add DM_GPIO support
configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs
configs: mx6sabresd: Add DM_SPI_FLASH necessary configs
board: mx6sabreauto: Remove the non-DM code
board: mx6sabresd: Remove non-DM code
board: mx6sabresd: Remove the enet reset gpio handling
configs: mx6sabresd: Reduce size for SPL by disabling SPL_DOS and
SPL_EFI
board: mx6sabreauto: Update README with the SPL DM FIT info
board: mx6sabresd: Update README with the SPL DM FIT info

 arch/arm/dts/Makefile                       |   8 +-
 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi   |   6 +
 arch/arm/dts/imx6dl-sabreauto.dts           |  13 +
 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi     |   6 +
 arch/arm/dts/imx6dl-sabresd.dts             |  18 +
 arch/arm/dts/imx6dl.dtsi                    | 306 ++++++++++-
 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi    |   6 +
 arch/arm/dts/imx6q-sabreauto.dts            |  18 +
 arch/arm/dts/imx6q-sabresd-u-boot.dtsi      |   6 +
 arch/arm/dts/imx6q-sabresd.dts              |  23 +
 arch/arm/dts/imx6q.dtsi                     | 310 +++++++++--
 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi  |  23 +
 arch/arm/dts/imx6qdl-sabreauto.dtsi         | 810 ++++++++++++++++++++++++++++
 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi    |  14 +
 arch/arm/dts/imx6qdl-sabresd.dtsi           | 741 +++++++++++++++++++++++++
 arch/arm/dts/imx6qdl-u-boot.dtsi            |   4 +-
 arch/arm/dts/imx6qdl.dtsi                   | 455 +++++++++-------
 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi   |   6 +
 arch/arm/dts/imx6qp-sabreauto.dts           |  55 ++
 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi     |   6 +
 arch/arm/dts/imx6qp-sabresd.dts             |  55 ++
 arch/arm/dts/imx6qp.dtsi                    | 115 ++++
 arch/arm/include/asm/arch-am33xx/spl.h      |   2 +-
 arch/arm/mach-imx/mx6/fit_spl.its           |  41 ++
 arch/arm/mach-omap2/boot-common.c           |   2 +-
 board/freescale/mx6sabreauto/README         |   6 +-
 board/freescale/mx6sabreauto/mx6sabreauto.c |  91 +---
 board/freescale/mx6sabresd/README           |   9 +-
 board/freescale/mx6sabresd/mx6sabresd.c     |  78 +--
 common/Makefile                             |   5 +-
 common/spl/Kconfig                          |   4 +-
 common/spl/Makefile                         |   2 +-
 common/spl/spl_usb.c                        |   4 -
 configs/am43xx_evm_usbhost_boot_defconfig   |   2 +-
 configs/am43xx_hs_evm_defconfig             |   2 +-
 configs/mx6sabreauto_defconfig              |  23 +-
 configs/mx6sabresd_defconfig                |  28 +-
 drivers/mmc/fsl_esdhc.c                     |   8 +-
 drivers/usb/host/ehci-mx6.c                 |   7 +-
 39 files changed, 2906 insertions(+), 412 deletions(-)
 create mode 100644 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-sabresd.dts
 create mode 100644 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6q-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabresd.dts
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabresd.dts
 create mode 100644 arch/arm/dts/imx6qp.dtsi
 create mode 100644 arch/arm/mach-imx/mx6/fit_spl.its
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH v2 1/22 usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE

Since there is the SPL_USB_HOST_SUPPORT for enabling USB support in SPL, makes more sense to rename the SPL_USB_SUPPORT as SPL_USB_STORAGE. Everything that is not part of the usb storage support in SPL is now build under SPL_USB_HOST_SUPPORT.

---
 arch/arm/include/asm/arch-am33xx/spl.h    | 2 +-
 arch/arm/mach-omap2/boot-common.c         | 2 +-
 common/Makefile                           | 5 +++--
 common/spl/Kconfig                        | 4 ++--
 common/spl/Makefile                       | 2 +-
 common/spl/spl_usb.c                      | 4 ----
 configs/am43xx_evm_usbhost_boot_defconfig | 2 +-
 configs/am43xx_hs_evm_defconfig           | 2 +-
 8 files changed, 10 insertions(+), 13 deletions(-)
arch/arm/include/asm/arch-am33xx/spl.h +1 -1
index 0bf8c17..f3910c2 100644
@@ -62,7 +62,7 @@
 #define BOOT_DEVICE_CPGMAC	0x47
 
 #define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
-#ifdef CONFIG_SPL_USB_SUPPORT
+#ifdef CONFIG_SPL_USB_STORAGE
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_USB
 #else
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2
arch/arm/mach-omap2/boot-common.c +1 -1
index 2db1922..c8b8ac6 100644
@@ -93,7 +93,7 @@ void save_omap_boot_params(void)
 			sys_boot_device = 1;
 			break;
 #endif
-#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_SUPPORT)
+#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_STORAGE)
 		case BOOT_DEVICE_USB:
 			sys_boot_device = 1;
 			break;
common/Makefile +3 -2
index ad390d0..8c92feb 100644
@@ -75,8 +75,9 @@ obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
 
 ifdef CONFIG_SPL_USB_HOST_SUPPORT
-obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
-obj-$(CONFIG_USB_STORAGE) += usb_storage.o
+obj-y += usb.o
+obj-y += usb_hub.o
+obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o
 else
 obj-$(CONFIG_USB_MUSB_HOST) += usb.o
 endif
common/spl/Kconfig +2 -2
index 54b0dc3..8b0627e 100644
@@ -766,9 +766,9 @@ config SPL_USB_HOST_SUPPORT
 	  device can be attached. This option enables the drivers in
 	  drivers/usb/host as part of an SPL build.
 
-config SPL_USB_SUPPORT
+config SPL_USB_STORAGE
 	bool "Support loading from USB"
-	depends on SPL_USB_HOST_SUPPORT
+	depends on SPL_USB_HOST_SUPPORT && !(BLK && !DM_USB)
 	help
 	  Enable support for USB devices in SPL. This allows use of USB
 	  devices such as hard drives and flash drivers for loading U-Boot.
common/spl/Makefile +1 -1
index 6f8d759..a3980ce 100644
@@ -22,7 +22,7 @@ obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o
 obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o
 obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o
 obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o
-obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o
+obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o
 obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o
 obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o
 obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o
common/spl/spl_usb.c +0 -4
index c8d8231..e29d579 100644
@@ -15,9 +15,7 @@
 #include <usb.h>
 #include <fat.h>
 
-#ifdef CONFIG_USB_STORAGE
 static int usb_stor_curr_dev = -1; /* current device */
-#endif
 
 static int spl_usb_load_image(struct spl_image_info *spl_image,
 			      struct spl_boot_device *bootdev)
@@ -34,13 +32,11 @@ static int spl_usb_load_image(struct spl_image_info *spl_image,
 		return err;
 	}
 
-#ifdef CONFIG_USB_STORAGE
 	/* try to recognize storage devices immediately */
 	usb_stor_curr_dev = usb_stor_scan(1);
 	stor_dev = blk_get_devnum_by_type(IF_TYPE_USB, usb_stor_curr_dev);
 	if (!stor_dev)
 		return -ENODEV;
-#endif
 
 	debug("boot mode - FAT\n");
 
configs/am43xx_evm_usbhost_boot_defconfig +1 -1
index 5131f19..5bd919b 100644
@@ -14,7 +14,7 @@ CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_USB_HOST_SUPPORT=y
-CONFIG_SPL_USB_SUPPORT=y
+CONFIG_SPL_USB_STORAGE=y
 CONFIG_CMD_SPL=y
 CONFIG_CMD_SPL_NAND_OFS=0x00100000
 CONFIG_CMD_SPL_WRITE_SIZE=0x40000
configs/am43xx_hs_evm_defconfig +1 -1
index 99e4ccb..c01fda9 100644
@@ -24,7 +24,7 @@ CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_NET_SUPPORT=y
 CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
 CONFIG_SPL_USB_HOST_SUPPORT=y
-CONFIG_SPL_USB_SUPPORT=y
+CONFIG_SPL_USB_STORAGE=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_ETHER=y
 # CONFIG_CMD_FLASH is not set
Signature · 1 line
2.7.4
author
#2 lore raw

PATCH v2 2/22 usb: ehci-mx6: Make regulator DM_REGULATOR dependent

In reply to Abel Vesa

Do the regulator related work only if the build has the DM_REGULATOR.

---
 drivers/usb/host/ehci-mx6.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/usb/host/ehci-mx6.c +6 -1
index 1acf08d..9483947 100644
@@ -404,6 +404,7 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev)
 	if (ret)
 		return ret;
 
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	if (priv->vbus_supply) {
 		ret = regulator_set_enable(priv->vbus_supply,
 					   (type == USB_INIT_DEVICE) ?
@@ -413,6 +414,7 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev)
 			return ret;
 		}
 	}
+#endif
 
 	if (type == USB_INIT_DEVICE)
 		return 0;
@@ -514,15 +516,17 @@ static int ehci_usb_probe(struct udevice *dev)
 	priv->portnr = dev->seq;
 	priv->init_type = type;
 
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	ret = device_get_supply_regulator(dev, "vbus-supply",
 					  &priv->vbus_supply);
 	if (ret)
 		debug("%s: No vbus supply\n", dev->name);
-
+#endif
 	ret = ehci_mx6_common_init(ehci, priv->portnr);
 	if (ret)
 		return ret;
 
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	if (priv->vbus_supply) {
 		ret = regulator_set_enable(priv->vbus_supply,
 					   (type == USB_INIT_DEVICE) ?
@@ -532,6 +536,7 @@ static int ehci_usb_probe(struct udevice *dev)
 			return ret;
 		}
 	}
+#endif
 
 	if (priv->init_type == USB_INIT_HOST) {
 		setbits_le32(&ehci->usbmode, CM_HOST);
Signature · 1 line
2.7.4
#3 lore raw

PATCH v2 2/22 usb: ehci-mx6: Make regulator DM_REGULATOR dependent

Quoted 67 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:31
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 02/22] usb: ehci-mx6: Make regulator DM_REGULATOR dependent

Do the regulator related work only if the build has the DM_REGULATOR.

---
 drivers/usb/host/ehci-mx6.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/usb/host/ehci-mx6.c index renamed from drivers/usb/host/ehci-mx6.c +0 -0

1acf08d..9483947 100644

drivers/usb/host/ehci-mx6.c +6 -2
@@ -404,6 +404,7 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev)
 	if (ret)
 		return ret;
 
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	if (priv->vbus_supply) {
 		ret = regulator_set_enable(priv->vbus_supply,
 					   (type == USB_INIT_DEVICE) ?
@@ -413,6 +414,7 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev)
 			return ret;
 		}
 	}
+#endif
 
 	if (type == USB_INIT_DEVICE)
 		return 0;
@@ -514,15 +516,17 @@ static int ehci_usb_probe(struct udevice *dev)
 	priv->portnr = dev->seq;
 	priv->init_type = type;
 
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	ret = device_get_supply_regulator(dev, "vbus-supply",
 					  &priv->vbus_supply);
 	if (ret)
 		debug("%s: No vbus supply\n", dev->name);
-
+#endif
 	ret = ehci_mx6_common_init(ehci, priv->portnr);
 	if (ret)
 		return ret;
 
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	if (priv->vbus_supply) {
 		ret = regulator_set_enable(priv->vbus_supply,
 					   (type == USB_INIT_DEVICE) ?
@@ -532,6 +536,7 @@ static int ehci_usb_probe(struct udevice *dev)
 			return ret;
 		}
 	}
+#endif
 
 	if (priv->init_type == USB_INIT_HOST) {
 		setbits_le32(&ehci->usbmode, CM_HOST);
--
Quoted 1 line

2.7.4

author
#4 lore raw

PATCH v2 3/22 configs: imx6sabreauto: Add DM_MMC support

In reply to Abel Vesa

Add DM_MMC config to imx6sabreauto defconfig.

---
 configs/mx6sabreauto_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/mx6sabreauto_defconfig +1 -0
index 40386c2..a3d63a2 100644
@@ -44,6 +44,7 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_SF=y
+CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_NAND=y
 CONFIG_NAND_MXS=y
Signature · 1 line
2.7.4
author
#5 lore raw

PATCH v2 4/22 configs: imx6sabreauto: Add DM_USB support

In reply to Abel Vesa

Add the DM support for USB. For that, DM_REGULATOR is needed.

---
 configs/mx6sabreauto_defconfig | 2 ++
 1 file changed, 2 insertions(+)
configs/mx6sabreauto_defconfig +2 -0
index a3d63a2..4bdcbb1 100644
@@ -52,9 +52,11 @@ CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
+CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="FSL"
Signature · 1 line
2.7.4
author
#6 lore raw

PATCH v2 5/22 mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds

In reply to Abel Vesa

Since the fsl_esdhc will also be used by SPL, make the preprocessor switches more generic to allow any kind of build.

---
 drivers/mmc/fsl_esdhc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/mmc/fsl_esdhc.c +4 -4
index b8171ba..47f2a8f 100644
@@ -804,7 +804,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
 	case MMC_SIGNAL_VOLTAGE_330:
 		if (priv->vs18_enable)
 			return -EIO;
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 		if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
 			ret = regulator_set_value(priv->vqmmc_dev, 3300000);
 			if (ret) {
@@ -823,7 +823,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_180:
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 		if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
 			ret = regulator_set_value(priv->vqmmc_dev, 1800000);
 			if (ret) {
@@ -1442,7 +1442,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 	int node = dev_of_offset(dev);
 	struct esdhc_soc_data *data =
 		(struct esdhc_soc_data *)dev_get_driver_data(dev);
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	struct udevice *vqmmc_dev;
 #endif
 	fdt_addr_t addr;
@@ -1500,7 +1500,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 
 	priv->vs18_enable = 0;
 
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	/*
 	 * If emmc I/O has a fixed voltage at 1.8V, this must be provided,
 	 * otherwise, emmc will work abnormally.
Signature · 1 line
2.7.4
#7 lore raw

PATCH v2 5/22 mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds

Hi Abel,

Quoted 23 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:31
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 05/22] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds

Since the fsl_esdhc will also be used by SPL, make the preprocessor switches more generic to allow any kind of build.

---
 drivers/mmc/fsl_esdhc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/mmc/fsl_esdhc.c index renamed from drivers/mmc/fsl_esdhc.c +0 -0

b8171ba..47f2a8f 100644

drivers/mmc/fsl_esdhc.c static int esdhc_set_voltage(struct mmc *mmc) · line 807

Quoted 5 lines
drivers/mmc/fsl_esdhc.c +1 -1
@@ -804,7 +804,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
 	case MMC_SIGNAL_VOLTAGE_330:
 		if (priv->vs18_enable)
 			return -EIO;
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)

If you need SPL DM REGULATOR, this is not enough, you might also need SPL_DM_REGULATOR.

Regards,
Peng.

Quoted 32 lines
drivers/mmc/fsl_esdhc.c +1 -1
 		if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
 			ret = regulator_set_value(priv->vqmmc_dev, 3300000);
 			if (ret) {
@@ -823,7 +823,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_180:
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 		if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
 			ret = regulator_set_value(priv->vqmmc_dev, 1800000);
 			if (ret) {
@@ -1442,7 +1442,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 	int node = dev_of_offset(dev);
 	struct esdhc_soc_data *data =
 		(struct esdhc_soc_data *)dev_get_driver_data(dev); -#ifdef

CONFIG_DM_REGULATOR

drivers/mmc/fsl_esdhc.c +2 -2
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	struct udevice *vqmmc_dev;
 #endif
 	fdt_addr_t addr;
@@ -1500,7 +1500,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 
 	priv->vs18_enable = 0;
 
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	/*
 	 * If emmc I/O has a fixed voltage at 1.8V, this must be provided,
 	 * otherwise, emmc will work abnormally.
--

2.7.4

author
#8 lore raw

PATCH v2 5/22 mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds

Quoted 20 lines · Peng Fan

Hi Abel,

Quoted 18 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:31
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 05/22] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds

Since the fsl_esdhc will also be used by SPL, make the preprocessor switches more generic to allow any kind of build.

---
 drivers/mmc/fsl_esdhc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
Quoted 13 lines

drivers/mmc/fsl_esdhc.c static int esdhc_set_voltage(struct mmc *mmc) · line 807

Quoted 10 lines
drivers/mmc/fsl_esdhc.c index renamed from drivers/mmc/fsl_esdhc.c +0 -0

b8171ba..47f2a8f 100644

drivers/mmc/fsl_esdhc.c +1 -1
@@ -804,7 +804,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
 	case MMC_SIGNAL_VOLTAGE_330:
 		if (priv->vs18_enable)
 			return -EIO;
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)

If you need SPL DM REGULATOR, this is not enough, you might also need SPL_DM_REGULATOR.

According to the definition:

/*
* CONFIG_IS_ENABLED(FOO) evaluates to

 *  1 if CONFIG_SPL_BUILD is undefined and CONFIG_FOO is set to 'y' or 'm',
 *  1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y' or 'm',
 *  0 otherwise.                                                                  
 */
#define CONFIG_IS_ENABLED(option) \
        (config_enabled(CONFIG_VAL(option)) ||          \
         config_enabled(CONFIG_VAL(option##_MODULE))

if the building for SPL and SPL_DM_REGULATOR is enabled, then build in whatever is inside.

What exactly am I missing here ?

Quoted 36 lines

Regards,
Peng.

Quoted 32 lines
drivers/mmc/fsl_esdhc.c +1 -1
 		if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
 			ret = regulator_set_value(priv->vqmmc_dev, 3300000);
 			if (ret) {
@@ -823,7 +823,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_180:
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 		if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
 			ret = regulator_set_value(priv->vqmmc_dev, 1800000);
 			if (ret) {
@@ -1442,7 +1442,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 	int node = dev_of_offset(dev);
 	struct esdhc_soc_data *data =
 		(struct esdhc_soc_data *)dev_get_driver_data(dev); -#ifdef

CONFIG_DM_REGULATOR

drivers/mmc/fsl_esdhc.c +2 -2
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	struct udevice *vqmmc_dev;
 #endif
 	fdt_addr_t addr;
@@ -1500,7 +1500,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 
 	priv->vs18_enable = 0;
 
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	/*
 	 * If emmc I/O has a fixed voltage at 1.8V, this must be provided,
 	 * otherwise, emmc will work abnormally.
--

2.7.4

#9 lore raw

PATCH v2 5/22 mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds

In reply to Abel Vesa
Quoted 4 lines · Abel Vesa

Since the fsl_esdhc will also be used by SPL, make the preprocessor switches more generic to allow any kind of build.

I have a similar patch pending wtih both DM_GPIO and DM_REGULATOR conversions.

https://patchwork.ozlabs.org/patch/1023230/

adam

Quoted 52 lines
---
 drivers/mmc/fsl_esdhc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/mmc/fsl_esdhc.c +4 -5
index b8171ba..47f2a8f 100644
@@ -804,7 +804,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
        case MMC_SIGNAL_VOLTAGE_330:
                if (priv->vs18_enable)
                        return -EIO;
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
                if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
                        ret = regulator_set_value(priv->vqmmc_dev, 3300000);
                        if (ret) {
@@ -823,7 +823,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
 
                return -EAGAIN;
        case MMC_SIGNAL_VOLTAGE_180:
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
                if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
                        ret = regulator_set_value(priv->vqmmc_dev, 1800000);
                        if (ret) {
@@ -1442,7 +1442,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
        int node = dev_of_offset(dev);
        struct esdhc_soc_data *data =
                (struct esdhc_soc_data *)dev_get_driver_data(dev);
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
        struct udevice *vqmmc_dev;
 #endif
        fdt_addr_t addr;
@@ -1500,7 +1500,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 
        priv->vs18_enable = 0;
 
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
        /*
         * If emmc I/O has a fixed voltage at 1.8V, this must be provided,
         * otherwise, emmc will work abnormally.
--

2.7.4

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot

author
#10 lore raw

PATCH v2 6/22 board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL

In reply to Abel Vesa

This matches one of the following three boards (or fails):
- imx6q-sabresd
- imx6qp-sabresd
- imx6dl-sabresd

---
 board/freescale/mx6sabresd/mx6sabresd.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
board/freescale/mx6sabresd/mx6sabresd.c +18 -0
index 0183ede..4688095 100644
@@ -1062,3 +1062,21 @@ void board_init_f(ulong dummy)
 	board_init_r(NULL, 0);
 }
 #endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+	if (is_mx6dq()) {
+		if (!strcmp(name, "imx6q-sabresd"))
+			return 0;
+	} else if (is_mx6dqp()) {
+		if (!strcmp(name, "imx6qp-sabresd"))
+			return 0;
+	} else if (is_mx6dl()) {
+		if (!strcmp(name, "imx6dl-sabresd"))
+			return 0;
+	}
+
+	return -1;
+}
+#endif
Signature · 1 line
2.7.4
#11 lore raw

PATCH v2 6/22 board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL

Quoted 38 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:31
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 06/22] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL

This matches one of the following three boards (or fails):
- imx6q-sabresd
- imx6qp-sabresd
- imx6dl-sabresd

---
 board/freescale/mx6sabresd/mx6sabresd.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
board/freescale/mx6sabresd/mx6sabresd.c +7 -0
index 0183ede..4688095 100644
@@ -1062,3 +1062,21 @@ void board_init_f(ulong dummy)
 	board_init_r(NULL, 0);
 }
 #endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name) {
+	if (is_mx6dq()) {
+		if (!strcmp(name, "imx6q-sabresd"))
+			return 0;
+	} else if (is_mx6dqp()) {

board/freescale/mx6sabresd/mx6sabresd.c void board_init_f(ulong dummy) · line 1081

Quoted 10 lines
board/freescale/mx6sabresd/mx6sabresd.c +10 -0
+		if (!strcmp(name, "imx6qp-sabresd"))
+			return 0;
+	} else if (is_mx6dl()) {
+		if (!strcmp(name, "imx6dl-sabresd"))
+			return 0;
+	}
+
+	return -1;
+}
+#endif
Quoted 2 lines

--
2.7.4

author
#12 lore raw

PATCH v2 7/22 board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL

In reply to Abel Vesa

This matches one of the following three boards (or fails):
- imx6q-sabreauto
- imx6qp-sabreauto
- imx6dl-sabreauto

---
 board/freescale/mx6sabreauto/mx6sabreauto.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
board/freescale/mx6sabreauto/mx6sabreauto.c +18 -0
index c1bef85..c8f1263 100644
@@ -1097,3 +1097,21 @@ void board_init_f(ulong dummy)
 	board_init_r(NULL, 0);
 }
 #endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+	if (is_mx6dq()) {
+		if (!strcmp(name, "imx6q-sabreauto"))
+			return 0;
+	} else if (is_mx6dqp()) {
+		if (!strcmp(name, "imx6qp-sabreauto"))
+			return 0;
+	} else if (is_mx6dl()) {
+		if (!strcmp(name, "imx6dl-sabreauto"))
+			return 0;
+	}
+
+	return -1;
+}
+#endif
Signature · 1 line
2.7.4
#13 lore raw

PATCH v2 7/22 board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL

Quoted 38 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:31
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 07/22] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL

This matches one of the following three boards (or fails):
- imx6q-sabreauto
- imx6qp-sabreauto
- imx6dl-sabreauto

---
 board/freescale/mx6sabreauto/mx6sabreauto.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
board/freescale/mx6sabreauto/mx6sabreauto.c +7 -0
index c1bef85..c8f1263 100644
@@ -1097,3 +1097,21 @@ void board_init_f(ulong dummy)
 	board_init_r(NULL, 0);
 }
 #endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name) {
+	if (is_mx6dq()) {
+		if (!strcmp(name, "imx6q-sabreauto"))
+			return 0;
+	} else if (is_mx6dqp()) {

board/freescale/mx6sabreauto/mx6sabreauto.c void board_init_f(ulong dummy) · line 1116

Quoted 10 lines
board/freescale/mx6sabreauto/mx6sabreauto.c +10 -0
+		if (!strcmp(name, "imx6qp-sabreauto"))
+			return 0;
+	} else if (is_mx6dl()) {
+		if (!strcmp(name, "imx6dl-sabreauto"))
+			return 0;
+	}
+
+	return -1;
+}
+#endif
Quoted 2 lines

--
2.7.4

author
#14 lore raw

PATCH v2 8/22 arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files

In reply to Abel Vesa

This allows us to keep the basic dts[i] files up-to-date with the ones in kernel, but at the same time allowing the u-boot to add its own properties to the existing nodes.

---
 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi  |  6 ++++++
 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi    |  6 ++++++
 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi   |  6 ++++++
 arch/arm/dts/imx6q-sabresd-u-boot.dtsi     |  6 ++++++
 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi | 23 +++++++++++++++++++++++
 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi   | 14 ++++++++++++++
 arch/arm/dts/imx6qdl-u-boot.dtsi           |  4 ++--
 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi  |  6 ++++++
 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi    |  6 ++++++
 9 files changed, 75 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi
arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000..b3f5f2d
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>
+ */
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
arch/arm/dts/imx6dl-sabresd-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000..e34cf3c
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>
+ */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
arch/arm/dts/imx6q-sabreauto-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000..b3f5f2d
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>
+ */
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
arch/arm/dts/imx6q-sabresd-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000..e34cf3c
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>
+ */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi new file +23 -0
new file mode 100644
index 0000000..3995849
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+	};
+};
+
+&usdhc3 {
+	no-1-8-v;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi new file +14 -0
new file mode 100644
index 0000000..45f02b1
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
arch/arm/dts/imx6qdl-u-boot.dtsi +2 -2
index dffc21b..45ae2fa 100644
@@ -7,11 +7,11 @@
 	soc {
 		u-boot,dm-spl;
 
-		aips-bus at 02000000 {
+		aips-bus at 2000000 {
 			u-boot,dm-spl;
 		};
 
-		aips-bus at 02100000 {
+		aips-bus at 2100000 {
 			u-boot,dm-spl;
 		};
 	};
arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000..b3f5f2d
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>
+ */
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
arch/arm/dts/imx6qp-sabresd-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000..e34cf3c
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>
+ */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
Signature · 1 line
2.7.4
#15 lore raw

PATCH v2 8/22 arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files

Hi Abel,

Quoted 43 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:31
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 08/22] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files

This allows us to keep the basic dts[i] files up-to-date with the ones in kernel, but at the same time allowing the u-boot to add its own properties to the existing nodes.

---
 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi  |  6 ++++++
 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi    |  6 ++++++
 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi   |  6 ++++++
 arch/arm/dts/imx6q-sabresd-u-boot.dtsi     |  6 ++++++
 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi | 23
+++++++++++++++++++++++
 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi   | 14 ++++++++++++++
 arch/arm/dts/imx6qdl-u-boot.dtsi           |  4 ++--
 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi  |  6 ++++++
 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi    |  6 ++++++
 9 files changed, 75 insertions(+), 2 deletions(-)  create mode 100644
arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi
arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi new file +0 -0
new file mode 100644
index 0000000..b3f5f2d

arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi line 3

Quoted 3 lines
arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi new file +3 -0
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>  */

Is this file copied from other places? Do you need to update Copyright? Same questions to the following files with Copyright.

Quoted 52 lines
arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi new file +2 -0
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
arch/arm/dts/imx6dl-sabresd-u-boot.dtsi new file +5 -0
new file mode 100644
index 0000000..e34cf3c
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>  */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
arch/arm/dts/imx6q-sabreauto-u-boot.dtsi new file +5 -0
new file mode 100644
index 0000000..b3f5f2d
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>  */
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
arch/arm/dts/imx6q-sabresd-u-boot.dtsi new file +5 -0
new file mode 100644
index 0000000..e34cf3c
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>  */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi new file +7 -0
new file mode 100644
index 0000000..3995849
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+

arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi line 17

Quoted 10 lines
arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi new file +10 -0
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+	};
+};
+
+&usdhc3 {
+	no-1-8-v;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;

You could drop the upper two lines. They are not used by U-Boot.

Regards,
Peng.

Quoted 72 lines
arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi new file +6 -0
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi new file +14 -0
new file mode 100644
index 0000000..45f02b1
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
arch/arm/dts/imx6qdl-u-boot.dtsi +2 -2
index dffc21b..45ae2fa 100644
@@ -7,11 +7,11 @@
 	soc {
 		u-boot,dm-spl;
 
-		aips-bus at 02000000 {
+		aips-bus at 2000000 {
 			u-boot,dm-spl;
 		};
 
-		aips-bus at 02100000 {
+		aips-bus at 2100000 {
 			u-boot,dm-spl;
 		};
 	};
arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi new file +5 -0
new file mode 100644
index 0000000..b3f5f2d
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>  */
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
arch/arm/dts/imx6qp-sabresd-u-boot.dtsi new file +5 -1
new file mode 100644
index 0000000..e34cf3c
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>  */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
--

2.7.4

author
#16 lore raw

PATCH v2 8/22 arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files

Quoted 38 lines · Peng Fan

Hi Abel,

Quoted 36 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:31
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 08/22] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files

This allows us to keep the basic dts[i] files up-to-date with the ones in kernel, but at the same time allowing the u-boot to add its own properties to the existing nodes.

---
 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi  |  6 ++++++
 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi    |  6 ++++++
 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi   |  6 ++++++
 arch/arm/dts/imx6q-sabresd-u-boot.dtsi     |  6 ++++++
 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi | 23
+++++++++++++++++++++++
 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi   | 14 ++++++++++++++
 arch/arm/dts/imx6qdl-u-boot.dtsi           |  4 ++--
 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi  |  6 ++++++
 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi    |  6 ++++++
 9 files changed, 75 insertions(+), 2 deletions(-)  create mode 100644
arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi
Quoted 14 lines

arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi line 3

Quoted 10 lines
arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi new file +3 -0
new file mode 100644
index 0000000..b3f5f2d
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>  */

Is this file copied from other places? Do you need to update Copyright? Same questions to the following files with Copyright.

Oups, I took the icore implementation as example and forgot to modify the copyright header. Will do in the next version.

Quoted 141 lines
Quoted 52 lines
arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi new file +2 -0
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
arch/arm/dts/imx6dl-sabresd-u-boot.dtsi new file +5 -0
new file mode 100644
index 0000000..e34cf3c
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>  */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
arch/arm/dts/imx6q-sabreauto-u-boot.dtsi new file +5 -0
new file mode 100644
index 0000000..b3f5f2d
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>  */
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
arch/arm/dts/imx6q-sabresd-u-boot.dtsi new file +5 -0
new file mode 100644
index 0000000..e34cf3c
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>  */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi new file +7 -0
new file mode 100644
index 0000000..3995849
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+

arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi line 17

Quoted 10 lines
arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi new file +10 -0
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+	};
+};
+
+&usdhc3 {
+	no-1-8-v;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;

You could drop the upper two lines. They are not used by U-Boot.

Regards,
Peng.

Quoted 72 lines
arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi new file +6 -0
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi new file +14 -0
new file mode 100644
index 0000000..45f02b1
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
arch/arm/dts/imx6qdl-u-boot.dtsi +2 -2
index dffc21b..45ae2fa 100644
@@ -7,11 +7,11 @@
 	soc {
 		u-boot,dm-spl;
 
-		aips-bus at 02000000 {
+		aips-bus at 2000000 {
 			u-boot,dm-spl;
 		};
 
-		aips-bus at 02100000 {
+		aips-bus at 2100000 {
 			u-boot,dm-spl;
 		};
 	};
arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi new file +5 -0
new file mode 100644
index 0000000..b3f5f2d
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>  */
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
arch/arm/dts/imx6qp-sabresd-u-boot.dtsi new file +5 -1
new file mode 100644
index 0000000..e34cf3c
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <[email protected]>  */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
--

2.7.4

#17 lore raw

PATCH v2 8/22 arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files

In reply to Abel Vesa
Quoted 16 lines · Abel Vesa

This allows us to keep the basic dts[i] files up-to-date with the ones in kernel, but at the same time allowing the u-boot to add its own properties to the existing nodes.

---
 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi  |  6 ++++++
 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi    |  6 ++++++
 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi   |  6 ++++++
 arch/arm/dts/imx6q-sabresd-u-boot.dtsi     |  6 ++++++
 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi | 23 +++++++++++++++++++++++
 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi   | 14 ++++++++++++++
 arch/arm/dts/imx6qdl-u-boot.dtsi           |  4 ++--
 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi  |  6 ++++++
 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi    |  6 ++++++
 9 files changed, 75 insertions(+), 2 deletions(-)
Quoted 8 lines
 create mode 100644 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi

Since a lot of these files are just #include the main one, is there not some rule under u_boot_dtsi_options in scripts/Makefile.lib that would match and pick that main one up automatically?

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190129/2f1fa304/attachment.sig>
author
#18 lore raw

PATCH v2 8/22 arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files

Quoted 26 lines · Tom Rini
Quoted 16 lines · Abel Vesa

This allows us to keep the basic dts[i] files up-to-date with the ones in kernel, but at the same time allowing the u-boot to add its own properties to the existing nodes.

---
 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi  |  6 ++++++
 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi    |  6 ++++++
 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi   |  6 ++++++
 arch/arm/dts/imx6q-sabresd-u-boot.dtsi     |  6 ++++++
 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi | 23 +++++++++++++++++++++++
 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi   | 14 ++++++++++++++
 arch/arm/dts/imx6qdl-u-boot.dtsi           |  4 ++--
 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi  |  6 ++++++
 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi    |  6 ++++++
 9 files changed, 75 insertions(+), 2 deletions(-)
Quoted 8 lines
 create mode 100644 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi
Quoted 4 lines

Since a lot of these files are just #include the main one, is there not some rule under u_boot_dtsi_options in scripts/Makefile.lib that would match and pick that main one up automatically?

OK, so I looked into it. The thing is, the CONFIG_SYS_SOC is not generic enough. Lets take an example. For imx6dl-sabresd.dts, in order to include the most generic one (or as you named it: 'the main one'), in this case imx6qdl-sabresd-u-boot.dtsi, the CONFIG_SYS_SOC should be set to imx6qdl instead of imx6dl. I don't know the implications if we make this rename, but this is why your suggestion doesn't work as is. So I'll keep all the files for now.

Quoted 2 lines
Signature · 1 line
Tom
author
#19 lore raw

PATCH v2 9/22 arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]

In reply to Abel Vesa

Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] to the ones from kernel v4.20 (commit 8fe28cb58bcb2).

---
 arch/arm/dts/Makefile               |   8 +-
 arch/arm/dts/imx6dl-sabreauto.dts   |  13 +
 arch/arm/dts/imx6dl-sabresd.dts     |  18 +
 arch/arm/dts/imx6dl.dtsi            | 306 ++++++++++++--
 arch/arm/dts/imx6q-sabreauto.dts    |  18 +
 arch/arm/dts/imx6q-sabresd.dts      |  23 +
 arch/arm/dts/imx6q.dtsi             | 310 ++++++++++++--
 arch/arm/dts/imx6qdl-sabreauto.dtsi | 810 ++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6qdl-sabresd.dtsi   | 741 +++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6qdl.dtsi           | 455 +++++++++++---------
 arch/arm/dts/imx6qp-sabreauto.dts   |  55 +++
 arch/arm/dts/imx6qp-sabresd.dts     |  55 +++
 arch/arm/dts/imx6qp.dtsi            | 115 +++++
 13 files changed, 2669 insertions(+), 258 deletions(-)
 create mode 100644 arch/arm/dts/imx6dl-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6dl-sabresd.dts
 create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6q-sabresd.dts
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6qp-sabresd.dts
 create mode 100644 arch/arm/dts/imx6qp.dtsi
arch/arm/dts/Makefile +7 -1
index 5c3225b..c18da3d 100644
@@ -443,7 +443,13 @@ dtb-$(CONFIG_MX6QDL) += \
 	imx6q-icore.dtb \
 	imx6q-icore-mipi.dtb \
 	imx6q-icore-rqs.dtb \
-	imx6q-logicpd.dtb
+	imx6q-logicpd.dtb \
+	imx6q-sabreauto.dtb \
+	imx6q-sabresd.dtb \
+	imx6dl-sabreauto.dtb \
+	imx6dl-sabresd.dtb \
+	imx6qp-sabreauto.dtb \
+	imx6qp-sabresd.dtb
 
 dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
 
arch/arm/dts/imx6dl-sabreauto.dts new file +13 -0
new file mode 100644
index 0000000..660d52a
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
+	compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
+};
arch/arm/dts/imx6dl-sabresd.dts new file +18 -0
new file mode 100644
index 0000000..cd6bbf2
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
+	compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
arch/arm/dts/imx6dl.dtsi +282 -24

365 lines not on this page · raw message

arch/arm/dts/imx6q-sabreauto.dts new file +18 -0
new file mode 100644
index 0000000..6e981a3
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
arch/arm/dts/imx6q-sabresd.dts new file +23 -0
new file mode 100644
index 0000000..eec9446
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Smart Device Board";
+	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
arch/arm/dts/imx6q.dtsi +276 -34

450 lines not on this page · raw message

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +810 -0

810 lines not on this page · raw message

arch/arm/dts/imx6qdl-sabresd.dtsi new file +741 -0

741 lines not on this page · raw message

arch/arm/dts/imx6qdl.dtsi +256 -199

548 lines not on this page · raw message

arch/arm/dts/imx6qp-sabreauto.dts new file +55 -0

55 lines not on this page · raw message

arch/arm/dts/imx6qp-sabresd.dts new file +55 -0

55 lines not on this page · raw message

arch/arm/dts/imx6qp.dtsi new file +115 -0

115 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.7.4

Part of the diff is not shown here. View the raw message.

#20 lore raw

PATCH v2 9/22 arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]

Quoted 12 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:31
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 09/22] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]

Quoted 4 lines

Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] to the ones from kernel v4.20 (commit 8fe28cb58bcb2).

Quoted 4,052 lines
---
 arch/arm/dts/Makefile               |   8 +-
 arch/arm/dts/imx6dl-sabreauto.dts   |  13 +
 arch/arm/dts/imx6dl-sabresd.dts     |  18 +
 arch/arm/dts/imx6dl.dtsi            | 306 ++++++++++++--
 arch/arm/dts/imx6q-sabreauto.dts    |  18 +
 arch/arm/dts/imx6q-sabresd.dts      |  23 +
 arch/arm/dts/imx6q.dtsi             | 310 ++++++++++++--
 arch/arm/dts/imx6qdl-sabreauto.dtsi | 810
++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6qdl-sabresd.dtsi   | 741
+++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6qdl.dtsi           | 455 +++++++++++---------
 arch/arm/dts/imx6qp-sabreauto.dts   |  55 +++
 arch/arm/dts/imx6qp-sabresd.dts     |  55 +++
 arch/arm/dts/imx6qp.dtsi            | 115 +++++
 13 files changed, 2669 insertions(+), 258 deletions(-)
 create mode 100644 arch/arm/dts/imx6dl-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6dl-sabresd.dts
 create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6q-sabresd.dts
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6qp-sabresd.dts
 create mode 100644 arch/arm/dts/imx6qp.dtsi
arch/arm/dts/Makefile +7 -1
index 5c3225b..c18da3d 100644
@@ -443,7 +443,13 @@ dtb-$(CONFIG_MX6QDL) += \
 	imx6q-icore.dtb \
 	imx6q-icore-mipi.dtb \
 	imx6q-icore-rqs.dtb \
-	imx6q-logicpd.dtb
+	imx6q-logicpd.dtb \
+	imx6q-sabreauto.dtb \
+	imx6q-sabresd.dtb \
+	imx6dl-sabreauto.dtb \
+	imx6dl-sabresd.dtb \
+	imx6qp-sabreauto.dtb \
+	imx6qp-sabresd.dtb
 
 dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
 
arch/arm/dts/imx6dl-sabreauto.dts new file +13 -0
new file mode 100644
index 0000000..660d52a
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
+	compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
+};
arch/arm/dts/imx6dl-sabresd.dts new file +18 -0
new file mode 100644
index 0000000..cd6bbf2
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
+	compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
arch/arm/dts/imx6dl.dtsi +54 -21
index 9a4c22c..f0607eb 100644
@@ -1,12 +1,6 @@
-
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "imx6dl-pinfunc.h"
@@ -39,6 +33,7 @@
 				396000	1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6QDL_CLK_ARM>,
 				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
 				 <&clks IMX6QDL_CLK_STEP>,
@@ -56,39 +51,57 @@
 			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				996000	1175000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 	};
 
 	soc {
-		ocram: sram at 00900000 {
+		ocram: sram at 900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		aips1: aips-bus at 02000000 {
-			iomuxc: iomuxc at 020e0000 {
+		aips1: aips-bus at 2000000 {
+			iomuxc: iomuxc at 20e0000 {
 				compatible = "fsl,imx6dl-iomuxc";
 			};
 
-			pxp: pxp at 020f0000 {
+			pxp: pxp at 20f0000 {
 				reg = <0x020f0000 0x4000>;
 				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			epdc: epdc at 020f4000 {
+			epdc: epdc at 20f4000 {
 				reg = <0x020f4000 0x4000>;
 				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
 			};
-
-			lcdif: lcdif at 020f8000 {
-				reg = <0x020f8000 0x4000>;
-				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-			};
 		};
 
-		aips2: aips-bus at 02100000 {
-			i2c4: i2c at 021f8000 {
+		aips2: aips-bus at 2100000 {
+			i2c4: i2c at 21f8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -100,14 +113,177 @@
 		};
 	};
 
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu1_csi0>, <&ipu1_csi1>;
+	};
+
 	display-subsystem {
 		compatible = "fsl,imx-display-subsystem";
 		ports = <&ipu1_di0>, <&ipu1_di1>;
 	};
+};
+
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 131 2>, <&iomuxc  2 137 8>, <&iomuxc 10
 189 2>,
+		      <&iomuxc 12 194 1>, <&iomuxc 13 193 1>, <&iomuxc 14 192
 1>,
+		      <&iomuxc 15 191 1>, <&iomuxc 16 185 2>, <&iomuxc 18 184
 1>,
+		      <&iomuxc 19 187 1>, <&iomuxc 20 183 1>, <&iomuxc 21 188
 1>,
+		      <&iomuxc 22 123 3>, <&iomuxc 25 121 1>, <&iomuxc 26 127
 1>,
+		      <&iomuxc 27 126 1>, <&iomuxc 28 128 1>, <&iomuxc 29 130
 1>,
+		      <&iomuxc 30 129 1>, <&iomuxc 31 122 1>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 161 8>, <&iomuxc  8 208 8>, <&iomuxc 16
 74 1>,
+		      <&iomuxc 17  73 1>, <&iomuxc 18  72 1>, <&iomuxc 19

71 1>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc 20  70 1>, <&iomuxc 21  69 1>, <&iomuxc 22

68 1>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc 23  79 2>, <&iomuxc 25 118 2>, <&iomuxc 27

117 1>,

arch/arm/dts/imx6dl.dtsi +5 -0
+		      <&iomuxc 28 113 4>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc  0 97  2>, <&iomuxc 2 105 8>, <&iomuxc 10

99 6>,

arch/arm/dts/imx6dl.dtsi +5 -0
+		      <&iomuxc 16 81 16>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc  5 136 1>, <&iomuxc  6 145 1>, <&iomuxc  7

150 1>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc  8 146 1>, <&iomuxc  9 151 1>, <&iomuxc 10

147 1>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153

1>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16

39 7>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc 23  56 1>, <&iomuxc 24  61 7>, <&iomuxc 31

46 1>;

arch/arm/dts/imx6dl.dtsi +3 -3
+};
 
-	gpu-subsystem {
-		compatible = "fsl,imx-gpu-subsystem";
-		cores = <&gpu_2d>, <&gpu_3d>;
+&gpio5 {
+	gpio-ranges = <&iomuxc  0 120 1>, <&iomuxc  2 77 1>, <&iomuxc  4

76 1>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc  5  47 9>, <&iomuxc 14 57 4>, <&iomuxc 18 37

1>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc 19  36 1>, <&iomuxc 20 35 1>, <&iomuxc 21 38

1>,

arch/arm/dts/imx6dl.dtsi +5 -0
+		      <&iomuxc 22  29 6>, <&iomuxc 28 19 4>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0  23 6>, <&iomuxc  6  75 1>, <&iomuxc

7 156 1>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc  8 155 1>, <&iomuxc  9 170 1>, <&iomuxc 10

169 1>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc 11 157 1>, <&iomuxc 14 158 3>, <&iomuxc 17 204

1>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc 18 203 1>, <&iomuxc 19 182 1>, <&iomuxc 20 177

4>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc 24 175 1>, <&iomuxc 25 171 1>, <&iomuxc 26 181

1>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc 27 172 3>, <&iomuxc 30 176 1>, <&iomuxc 31

78 1>;

arch/arm/dts/imx6dl.dtsi +4 -0
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 202 1>, <&iomuxc  1 201 1>, <&iomuxc  2

196 1>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc 3 195 1>, <&iomuxc  4 197 4>, <&iomuxc  8 205

1>,

arch/arm/dts/imx6dl.dtsi +1 -0
+		      <&iomuxc 9 207 1>, <&iomuxc 10 206 1>, <&iomuxc 11 133

3>;

arch/arm/dts/imx6dl.dtsi +115 -0
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			reg = <0>;
+
+			ipu1_csi0_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			ipu1_csi0_mux_from_mipi_vc1: endpoint {
+				remote-endpoint = <&mipi_vc1_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port at 2 {
+			reg = <2>;
+
+			ipu1_csi0_mux_from_mipi_vc2: endpoint {
+				remote-endpoint = <&mipi_vc2_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port at 3 {
+			reg = <3>;
+
+			ipu1_csi0_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port at 4 {
+			reg = <4>;
+
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port at 5 {
+			reg = <5>;
+
+			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+			};
+		};
+	};
+
+	ipu1_csi1_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			reg = <0>;
+
+			ipu1_csi1_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			ipu1_csi1_mux_from_mipi_vc1: endpoint {
+				remote-endpoint = <&mipi_vc1_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port at 2 {
+			reg = <2>;
+
+			ipu1_csi1_mux_from_mipi_vc2: endpoint {
+				remote-endpoint = <&mipi_vc2_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port at 3 {
+			reg = <3>;
+
+			ipu1_csi1_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port at 4 {
+			reg = <4>;
+
+			ipu1_csi1_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port at 5 {
+			reg = <5>;
+
+			ipu1_csi1_mux_to_ipu1_csi1: endpoint {
+				remote-endpoint = <&ipu1_csi1_from_ipu1_csi1_mux>;
+			};
+		};
 	};
 };
@@ -119,6 +295,12 @@
 	compatible = "fsl,imx6dl-hdmi";
 };
 
+&ipu1_csi1 {
+	ipu1_csi1_from_ipu1_csi1_mux: endpoint {
+		remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>;
+	};
+};
+
 &ldb {
 	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks
 IMX6QDL_CLK_LDB_DI1_SEL>,

<&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks
IMX6QDL_CLK_IPU1_DI1_SEL>,

arch/arm/dts/imx6dl.dtsi +76 -0
@@ -128,6 +310,82 @@
 		      "di0", "di1";
 };
 
+&mipi_csi {
+	port at 1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc0_to_ipu1_csi0_mux: endpoint at 0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+		};
+
+		mipi_vc0_to_ipu1_csi1_mux: endpoint at 1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>;
+		};
+	};
+
+	port at 2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc1_to_ipu1_csi0_mux: endpoint at 0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>;
+		};
+
+		mipi_vc1_to_ipu1_csi1_mux: endpoint at 1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>;
+		};
+	};
+
+	port at 3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc2_to_ipu1_csi0_mux: endpoint at 0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>;
+		};
+
+		mipi_vc2_to_ipu1_csi1_mux: endpoint at 1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>;
+		};
+	};
+
+	port at 4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc3_to_ipu1_csi0_mux: endpoint at 0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>;
+		};
+
+		mipi_vc3_to_ipu1_csi1_mux: endpoint at 1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>;
+		};
+	};
+};
+
+&mux {
+	mux-reg-masks = <0x34 0x00000007>, /* IPU_CSI0_MUX */
+			<0x34 0x00000038>, /* IPU_CSI1_MUX */
+			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
+			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
+			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
+			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
+			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
+};
+
 &vpu {
 	compatible = "fsl,imx6dl-vpu", "cnm,coda960";
 };
arch/arm/dts/imx6q-sabreauto.dts new file +18 -0
new file mode 100644
index 0000000..6e981a3
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
arch/arm/dts/imx6q-sabresd.dts new file +23 -0
new file mode 100644
index 0000000..eec9446
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Smart Device Board";
+	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
arch/arm/dts/imx6q.dtsi +151 -31
index c30c836..8381d24 100644
@@ -1,12 +1,6 @@
-
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "imx6q-pinfunc.h"
@@ -44,6 +38,7 @@
 				396000	1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6QDL_CLK_ARM>,
 				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
 				 <&clks IMX6QDL_CLK_STEP>,
@@ -56,38 +51,119 @@
 			soc-supply = <&reg_soc>;
 		};
 
-		cpu at 1 {
+		cpu1: cpu at 1 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
-		cpu at 2 {
+		cpu2: cpu at 2 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <2>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
-		cpu at 3 {
+		cpu3: cpu at 3 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <3>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 	};
 
 	soc {
-		ocram: sram at 00900000 {
+		ocram: sram at 900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		aips-bus at 02000000 { /* AIPS1 */
-			spba-bus at 02000000 {
-				ecspi5: ecspi at 02018000 {
+		aips-bus at 2000000 { /* AIPS1 */
+			spba-bus at 2000000 {
+				ecspi5: spi at 2018000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -96,18 +172,18 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
+					dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
 
-			iomuxc: iomuxc at 020e0000 {
+			iomuxc: iomuxc at 20e0000 {
 				compatible = "fsl,imx6q-iomuxc";
 			};
 		};
 
-		sata: sata at 02200000 {
+		sata: sata at 2200000 {
 			compatible = "fsl,imx6q-ahci";
 			reg = <0x02200000 0x4000>;
 			interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
@@ -118,17 +194,17 @@
 			status = "disabled";
 		};
 
-		gpu_vg: gpu at 02204000 {
+		gpu_vg: gpu at 2204000 {
 			compatible = "vivante,gc";
 			reg = <0x02204000 0x4000>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
 				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
 			clock-names = "bus", "core";
-			power-domains = <&gpc 1>;
+			power-domains = <&pd_pu>;
 		};
 
-		ipu2: ipu at 02800000 {
+		ipu2: ipu at 2800000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,imx6q-ipu";
@@ -143,10 +219,18 @@
 
 			ipu2_csi0: port at 0 {
 				reg = <0>;
+
+				ipu2_csi0_from_mipi_vc2: endpoint {
+					remote-endpoint = <&mipi_vc2_to_ipu2_csi0>;
+				};
 			};
 
 			ipu2_csi1: port at 1 {
 				reg = <1>;
+
+				ipu2_csi1_from_ipu2_csi1_mux: endpoint {
+					remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>;
+				};
 			};
 
 			ipu2_di0: port at 2 {
@@ -154,22 +238,27 @@
 				#size-cells = <0>;
 				reg = <2>;
 
-				ipu2_di0_disp0: disp0-endpoint {
+				ipu2_di0_disp0: endpoint at 0 {
+					reg = <0>;
 				};
 
-				ipu2_di0_hdmi: hdmi-endpoint {
+				ipu2_di0_hdmi: endpoint at 1 {
+					reg = <1>;
 					remote-endpoint = <&hdmi_mux_2>;
 				};
 
-				ipu2_di0_mipi: mipi-endpoint {
+				ipu2_di0_mipi: endpoint at 2 {
+					reg = <2>;
 					remote-endpoint = <&mipi_mux_2>;
 				};
 
-				ipu2_di0_lvds0: lvds0-endpoint {
+				ipu2_di0_lvds0: endpoint at 3 {
+					reg = <3>;
 					remote-endpoint = <&lvds0_mux_2>;
 				};
 
-				ipu2_di0_lvds1: lvds1-endpoint {
+				ipu2_di0_lvds1: endpoint at 4 {
+					reg = <4>;
 					remote-endpoint = <&lvds1_mux_2>;
 				};
 			};
@@ -179,33 +268,136 @@
 				#size-cells = <0>;
 				reg = <3>;
 
-				ipu2_di1_hdmi: hdmi-endpoint {
+				ipu2_di1_hdmi: endpoint at 1 {
+					reg = <1>;
 					remote-endpoint = <&hdmi_mux_3>;
 				};
 
-				ipu2_di1_mipi: mipi-endpoint {
+				ipu2_di1_mipi: endpoint at 2 {
+					reg = <2>;
 					remote-endpoint = <&mipi_mux_3>;
 				};
 
-				ipu2_di1_lvds0: lvds0-endpoint {
+				ipu2_di1_lvds0: endpoint at 3 {
+					reg = <3>;
 					remote-endpoint = <&lvds0_mux_3>;
 				};
 
-				ipu2_di1_lvds1: lvds1-endpoint {
+				ipu2_di1_lvds1: endpoint at 4 {
+					reg = <4>;
 					remote-endpoint = <&lvds1_mux_3>;
 				};
 			};
 		};
 	};
 
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu1_csi0>, <&ipu1_csi1>, <&ipu2_csi0>, <&ipu2_csi1>;
+	};
+
 	display-subsystem {
 		compatible = "fsl,imx-display-subsystem";
 		ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
 	};
+};
+
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 136  2>, <&iomuxc  2 141 1>, <&iomuxc
 3 139 1>,
+		      <&iomuxc  4 142  2>, <&iomuxc  6 140 1>, <&iomuxc  7
 144 2>,
+		      <&iomuxc  9 138  1>, <&iomuxc 10 213 3>, <&iomuxc 13
 20 1>,
+		      <&iomuxc 14  19  1>, <&iomuxc 15  21 1>, <&iomuxc 16
 208 1>,
+		      <&iomuxc 17 207  1>, <&iomuxc 18 210 3>, <&iomuxc 21
 209 1>,
+		      <&iomuxc 22 116 10>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 191 16>, <&iomuxc 16 55 14>, <&iomuxc 30
 35 1>,
+		      <&iomuxc 31  44  1>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc 0 69 16>, <&iomuxc 16 36 8>, <&iomuxc 24 45
 8>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc 5 149 1>, <&iomuxc 6 126 10>, <&iomuxc 16 87

16>;

arch/arm/dts/imx6q.dtsi +4 -0
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc 0  85  1>, <&iomuxc  2  34  1>, <&iomuxc

4 53 1>,

arch/arm/dts/imx6q.dtsi +5 -0
+		      <&iomuxc 5 103 13>, <&iomuxc 18 150 14>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0 164 6>, <&iomuxc  6  54 1>, <&iomuxc  7

181 5>,

arch/arm/dts/imx6q.dtsi +1 -0
+		      <&iomuxc 14 186 3>, <&iomuxc 17 170 2>, <&iomuxc 19

22 12>,

arch/arm/dts/imx6q.dtsi +5 -0
+		      <&iomuxc 31  86 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146

3>;

arch/arm/dts/imx6q.dtsi +66 -3
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			reg = <0>;
+
+			ipu1_csi0_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+			};
+		};
 
-	gpu-subsystem {
-		compatible = "fsl,imx-gpu-subsystem";
-		cores = <&gpu_2d>, <&gpu_3d>, <&gpu_vg>;
+		port at 2 {
+			reg = <2>;
+
+			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+			};
+		};
+	};
+
+	ipu2_csi1_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			reg = <0>;
+
+			ipu2_csi1_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			ipu2_csi1_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port at 2 {
+			reg = <2>;
+
+			ipu2_csi1_mux_to_ipu2_csi1: endpoint {
+				remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>;
+			};
+		};
 	};
 };
@@ -229,6 +421,12 @@
 	};
 };
 
+&ipu1_csi1 {
+	ipu1_csi1_from_mipi_vc1: endpoint {
+		remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
+	};
+};
+
 &ldb {
 	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks
 IMX6QDL_CLK_LDB_DI1_SEL>,

<&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks
IMX6QDL_CLK_IPU1_DI1_SEL>,

arch/arm/dts/imx6q.dtsi +44 -0
@@ -275,6 +473,40 @@
 	};
 };
 
+&mipi_csi {
+	port at 1 {
+		reg = <1>;
+
+		mipi_vc0_to_ipu1_csi0_mux: endpoint {
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+		};
+	};
+
+	port at 2 {
+		reg = <2>;
+
+		mipi_vc1_to_ipu1_csi1: endpoint {
+			remote-endpoint = <&ipu1_csi1_from_mipi_vc1>;
+		};
+	};
+
+	port at 3 {
+		reg = <3>;
+
+		mipi_vc2_to_ipu2_csi0: endpoint {
+			remote-endpoint = <&ipu2_csi0_from_mipi_vc2>;
+		};
+	};
+
+	port at 4 {
+		reg = <4>;
+
+		mipi_vc3_to_ipu2_csi1_mux: endpoint {
+			remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>;
+		};
+	};
+};
+
 &mipi_dsi {
 	ports {
 		port at 2 {
@@ -295,6 +527,16 @@
 	};
 };
 
+&mux {
+	mux-reg-masks = <0x04 0x00080000>, /* MIPI_IPU1_MUX */
+			<0x04 0x00100000>, /* MIPI_IPU2_MUX */
+			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
+			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
+			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
+			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
+			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
+};
+
 &vpu {
 	compatible = "fsl,imx6q-vpu", "cnm,coda960";
 };
arch/arm/dts/imx6qdl-sabreauto.dtsi new file +169 -0
new file mode 100644
index 0000000..a6dc5c4
@@ -0,0 +1,810 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory at 10000000 {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		program {
+			label = "Program";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROGRAM>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	clocks {
+		codec_osc: anaclk2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_audio: regulator at 0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "cs42888_supply";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg_vbus: regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			"fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif",
+			   "fsl,imx-sabreauto-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		mux-gpios = <&gpio5 4 0>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c at 1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adv7180: camera at 21 {
+				compatible = "adi,adv7180";
+				reg = <0x21>;
+				powerdown-gpios = <&max7310_b 2

GPIO_ACTIVE_LOW>;

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +6 -0
+				interrupt-parent = <&gpio1>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+				port {
+					adv7180_to_ipu1_csi0_mux: endpoint {
+						remote-endpoint =

<&ipu1_csi0_mux_from_parallel_sensor>;

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +311 -0
+						bus-width = <8>;
+					};
+				};
+			};
+
+			max7310_a: gpio at 30 {
+				compatible = "maxim,max7310";
+				reg = <0x30>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			max7310_b: gpio at 32 {
+				compatible = "maxim,max7310";
+				reg = <0x32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_max7310>;
+				reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			};
+
+			max7310_c: gpio at 34 {
+				compatible = "maxim,max7310";
+				reg = <0x34>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			light-sensor at 44 {
+				compatible = "isil,isl29023";
+				reg = <0x44>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+			};
+
+			magnetometer at e {
+				compatible = "fsl,mag3110";
+				reg = <0x0e>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			accelerometer at 1c {
+				compatible = "fsl,mma8451";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+			  <&clks IMX6QDL_PLL4_BYPASS>,
+			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
+				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	status = "disabled"; /* pin conflict with WEIM NOR */
+
+	flash: m25p80 at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
+			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100 at 8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: cs42888 at 48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&codec_osc>;
+		clock-names = "mclk";
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+	};
+
+	touchscreen at 4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_egalax_int>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-sabreauto {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
+				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			>;
+		};
+
+		pinctrl_ecspi1_cs: ecspi1cs {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+			>;
+		};
+
+		pinctrl_egalax_int: egalax-intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL
	0x1b030
arch/arm/dts/imx6qdl-sabreauto.dtsi new file +32 -0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_esai: esaigrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+			>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
+				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b0
+				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15
	0x80000000
arch/arm/dts/imx6qdl-sabreauto.dtsi new file +54 -0
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3mux: i2c3muxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12

0x1b0b0

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13

0x1b0b0

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14

0x1b0b0

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15

0x1b0b0

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16

0x1b0b0

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17

0x1b0b0

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18

0x1b0b0

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19

0x1b0b0

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +2 -0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC

0x1b0b0

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC

0x1b0b0

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +228 -0
+			>;
+		};
+
+		pinctrl_max7310: max7310grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
+			>;
+		};
+
+		pinctrl_pwm3: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_gpt_input_capture0: gptinputcapture0grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpt_input_capture1: gptinputcapture1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2	0x1b0b0
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_weim_cs0: weimcs0grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+			>;
+		};
+
+		pinctrl_weim_nor: weimnorgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
+				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel at 0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	status = "disabled"; /* pin conflict with SPI NOR */
+
+	nor at 0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x02000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+				0x0000c000 0x1404a38e 0x00000000>;
+	};
+};
arch/arm/dts/imx6qdl-sabresd.dtsi new file +264 -0
new file mode 100644
index 0000000..2cd5a9f
@@ -0,0 +1,741 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory at 10000000 {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg_vbus: regulator at 0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+			vin-supply = <&swbst_reg>;
+		};
+
+		reg_usb_h1_vbus: regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 29 0>;
+			enable-active-high;
+			vin-supply = <&swbst_reg>;
+		};
+
+		reg_audio: regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "wm8962-supply";
+			gpio = <&gpio4 10 0>;
+			enable-active-high;
+		};
+
+		reg_pcie: regulator at 3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pcie_reg>;
+			regulator-name = "MPCIE_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 19 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabresd-wm8962",
+			   "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		red {
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
+		};
+	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port at 0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80 at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: wm8962 at 1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0013 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x8014 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	ov5642: camera at 3c {
+		compatible = "ovti,ov5642";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		reg = <0x3c>;
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5642_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint =

<&ipu1_csi0_mux_from_parallel_sensor>;

arch/arm/dts/imx6qdl-sabresd.dtsi new file +208 -0
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ov5640: camera at 3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	pmic: pfuze100 at 8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts at 4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 2>;
+		wakeup-gpios = <&gpio6 7 0>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-sabresd {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL
	0x1b030
arch/arm/dts/imx6qdl-sabresd.dtsi new file +15 -0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
+			>;
+		};
+
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE
	0x1f8b0
arch/arm/dts/imx6qdl-sabresd.dtsi new file +6 -0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA
	0x4001b8b1
arch/arm/dts/imx6qdl-sabresd.dtsi new file +8 -0
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA
	0x4001b8b1
arch/arm/dts/imx6qdl-sabresd.dtsi new file +13 -0
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12

0x1b0b0

arch/arm/dts/imx6qdl-sabresd.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13

0x1b0b0

arch/arm/dts/imx6qdl-sabresd.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14

0x1b0b0

arch/arm/dts/imx6qdl-sabresd.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15

0x1b0b0

arch/arm/dts/imx6qdl-sabresd.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16

0x1b0b0

arch/arm/dts/imx6qdl-sabresd.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17

0x1b0b0

arch/arm/dts/imx6qdl-sabresd.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18

0x1b0b0

arch/arm/dts/imx6qdl-sabresd.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19

0x1b0b0

arch/arm/dts/imx6qdl-sabresd.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK

0x1b0b0

arch/arm/dts/imx6qdl-sabresd.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC

0x1b0b0

arch/arm/dts/imx6qdl-sabresd.dtsi new file +1 -0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC

0x1b0b0

arch/arm/dts/imx6qdl-sabresd.dtsi new file +217 -0
+			>;
+		};
+
+		pinctrl_ov5640: ov5640grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
+				MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
+			>;
+		};
+
+		pinctrl_ov5642: ov5642grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+			>;
+		};
+
+		pinctrl_pcie_reg: pciereggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
+			>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel at 1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port at 4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&reg_arm {
+       vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+       vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+       vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
arch/arm/dts/imx6qdl.dtsi +96 -27
index b13b0b2..e4daf15 100644
@@ -1,21 +1,23 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
 
 #include <dt-bindings/clock/imx6qdl-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; };
+
 	aliases {
 		ethernet0 = &fec;
 		can0 = &can1;
@@ -49,9 +51,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		ckil {
 			compatible = "fsl,imx-ckil", "fixed-clock";
 			#clock-cells = <0>;
@@ -71,6 +70,75 @@
 		};
 	};
 
+	tempmon: tempmon {
+		compatible = "fsl,imx6q-tempmon";
+		interrupt-parent = <&gpc>;
+		interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,tempmon = <&anatop>;
+		fsl,tempmon-data = <&ocotp>;
+		clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	};
+
+	ldb: ldb {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
+		gpr = <&gpr>;
+		status = "disabled";
+
+		lvds-channel at 0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			status = "disabled";
+
+			port at 0 {
+				reg = <0>;
+
+				lvds0_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_lvds0>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+
+				lvds0_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_lvds0>;
+				};
+			};
+		};
+
+		lvds-channel at 1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			status = "disabled";
+
+			port at 0 {
+				reg = <0>;
+
+				lvds1_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_lvds1>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+
+				lvds1_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_lvds1>;
+				};
+			};
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -78,7 +146,7 @@
 		interrupt-parent = <&gpc>;
 		ranges;
 
-		dma_apbh: dma-apbh at 00110000 {
+		dma_apbh: dma-apbh at 110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x00110000 0x2000>;
 			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -91,7 +159,7 @@
 			clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
 		};
 
-		gpmi: gpmi-nand at 00112000 {
+		gpmi: gpmi-nand at 112000 {
 			compatible = "fsl,imx6q-gpmi-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -111,7 +179,7 @@
 			status = "disabled";
 		};
 
-		hdmi: hdmi at 0120000 {
+		hdmi: hdmi at 120000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x00120000 0x9000>;
@@ -139,7 +207,7 @@
 			};
 		};
 
-		gpu_3d: gpu at 00130000 {
+		gpu_3d: gpu at 130000 {
 			compatible = "vivante,gc";
 			reg = <0x00130000 0x4000>;
 			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -147,20 +215,20 @@
 				 <&clks IMX6QDL_CLK_GPU3D_CORE>,
 				 <&clks IMX6QDL_CLK_GPU3D_SHADER>;
 			clock-names = "bus", "core", "shader";
-			power-domains = <&gpc 1>;
+			power-domains = <&pd_pu>;
 		};
 
-		gpu_2d: gpu at 00134000 {
+		gpu_2d: gpu at 134000 {
 			compatible = "vivante,gc";
 			reg = <0x00134000 0x4000>;
 			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
 				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
 			clock-names = "bus", "core";
-			power-domains = <&gpc 1>;
+			power-domains = <&pd_pu>;
 		};
 
-		timer at 00a00600 {
+		timer at a00600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
 			interrupts = <1 13 0xf01>;
@@ -168,7 +236,7 @@
 			clocks = <&clks IMX6QDL_CLK_TWD>;
 		};
 
-		intc: interrupt-controller at 00a01000 {
+		intc: interrupt-controller at a01000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
@@ -177,7 +245,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache at 00a02000 {
+		L2: l2-cache at a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -188,7 +256,7 @@
 			arm,shared-override;
 		};
 
-		pcie: pcie at 0x01000000 {
+		pcie: pcie at 1ffc000 {
 			compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
 			reg = <0x01ffc000 0x04000>,
 			      <0x01f00000 0x80000>;
@@ -196,6 +264,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			bus-range = <0x00 0xff>;
 			ranges = <0x81000000 0 0          0x01f80000 0

0x00010000 /* downstream I/O */
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>;
/* non-prefetchable memory */

arch/arm/dts/imx6qdl.dtsi +0 -3
 			num-lanes = <1>;
@@ -204,9 +273,9 @@
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123
 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 2 &gpc GIC_SPI 122
 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 3 &gpc GIC_SPI 121
 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 4 &gpc GIC_SPI 120

IRQ_TYPE_LEVEL_HIGH>;

arch/arm/dts/imx6qdl.dtsi +160 -169
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
 				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
 				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
@@ -214,26 +283,21 @@
 			status = "disabled";
 		};
 
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		aips-bus at 02000000 { /* AIPS1 */
+		aips-bus at 2000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x02000000 0x100000>;
 			ranges;
 
-			spba-bus at 02000000 {
+			spba-bus at 2000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x02000000 0x40000>;
 				ranges;
 
-				spdif: spdif at 02004000 {
+				spdif: spdif at 2004000 {
 					compatible = "fsl,imx35-spdif";
 					reg = <0x02004000 0x4000>;
 					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -253,7 +317,7 @@
 					status = "disabled";
 				};
 
-				ecspi1: ecspi at 02008000 {
+				ecspi1: spi at 2008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -267,7 +331,7 @@
 					status = "disabled";
 				};
 
-				ecspi2: ecspi at 0200c000 {
+				ecspi2: spi at 200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -281,7 +345,7 @@
 					status = "disabled";
 				};
 
-				ecspi3: ecspi at 02010000 {
+				ecspi3: spi at 2010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -295,7 +359,7 @@
 					status = "disabled";
 				};
 
-				ecspi4: ecspi at 02014000 {
+				ecspi4: spi at 2014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -309,7 +373,7 @@
 					status = "disabled";
 				};
 
-				uart1: serial at 02020000 {
+				uart1: serial at 2020000 {
 					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -321,7 +385,7 @@
 					status = "disabled";
 				};
 
-				esai: esai at 02024000 {
+				esai: esai at 2024000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx35-esai";
 					reg = <0x02024000 0x4000>;
@@ -337,7 +401,7 @@
 					status = "disabled";
 				};
 
-				ssi1: ssi at 02028000 {
+				ssi1: ssi at 2028000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6q-ssi",
 							"fsl,imx51-ssi";
@@ -353,7 +417,7 @@
 					status = "disabled";
 				};
 
-				ssi2: ssi at 0202c000 {
+				ssi2: ssi at 202c000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6q-ssi",
 							"fsl,imx51-ssi";
@@ -369,7 +433,7 @@
 					status = "disabled";
 				};
 
-				ssi3: ssi at 02030000 {
+				ssi3: ssi at 2030000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6q-ssi",
 							"fsl,imx51-ssi";
@@ -385,7 +449,7 @@
 					status = "disabled";
 				};
 
-				asrc: asrc at 02034000 {
+				asrc: asrc at 2034000 {
 					compatible = "fsl,imx53-asrc";
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
@@ -410,12 +474,12 @@
 					status = "okay";
 				};
 
-				spba at 0203c000 {
+				spba at 203c000 {
 					reg = <0x0203c000 0x4000>;
 				};
 			};
 
-			vpu: vpu at 02040000 {
+			vpu: vpu at 2040000 {
 				compatible = "cnm,coda960";
 				reg = <0x02040000 0x3c000>;
 				interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
@@ -424,16 +488,16 @@
 				clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
 					 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
 				clock-names = "per", "ahb";
-				power-domains = <&gpc 1>;
+				power-domains = <&pd_pu>;
 				resets = <&src 1>;
 				iram = <&ocram>;
 			};
 
-			aipstz at 0207c000 { /* AIPSTZ1 */
+			aipstz at 207c000 { /* AIPSTZ1 */
 				reg = <0x0207c000 0x4000>;
 			};
 
-			pwm1: pwm at 02080000 {
+			pwm1: pwm at 2080000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
@@ -444,7 +508,7 @@
 				status = "disabled";
 			};
 
-			pwm2: pwm at 02084000 {
+			pwm2: pwm at 2084000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
@@ -455,7 +519,7 @@
 				status = "disabled";
 			};
 
-			pwm3: pwm at 02088000 {
+			pwm3: pwm at 2088000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
@@ -466,7 +530,7 @@
 				status = "disabled";
 			};
 
-			pwm4: pwm at 0208c000 {
+			pwm4: pwm at 208c000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
@@ -477,7 +541,7 @@
 				status = "disabled";
 			};
 
-			can1: flexcan at 02090000 {
+			can1: flexcan at 2090000 {
 				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02090000 0x4000>;
 				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -487,7 +551,7 @@
 				status = "disabled";
 			};
 
-			can2: flexcan at 02094000 {
+			can2: flexcan at 2094000 {
 				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02094000 0x4000>;
 				interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
@@ -497,7 +561,7 @@
 				status = "disabled";
 			};
 
-			gpt: gpt at 02098000 {
+			gpt: gpt at 2098000 {
 				compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -507,7 +571,7 @@
 				clock-names = "ipg", "per", "osc_per";
 			};
 
-			gpio1: gpio at 0209c000 {
+			gpio1: gpio at 209c000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x0209c000 0x4000>;
 				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
@@ -518,7 +582,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			gpio2: gpio at 020a0000 {
+			gpio2: gpio at 20a0000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a0000 0x4000>;
 				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
@@ -529,7 +593,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			gpio3: gpio at 020a4000 {
+			gpio3: gpio at 20a4000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a4000 0x4000>;
 				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
@@ -540,7 +604,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			gpio4: gpio at 020a8000 {
+			gpio4: gpio at 20a8000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a8000 0x4000>;
 				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
@@ -551,7 +615,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			gpio5: gpio at 020ac000 {
+			gpio5: gpio at 20ac000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020ac000 0x4000>;
 				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
@@ -562,7 +626,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			gpio6: gpio at 020b0000 {
+			gpio6: gpio at 20b0000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020b0000 0x4000>;
 				interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -573,7 +637,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			gpio7: gpio at 020b4000 {
+			gpio7: gpio at 20b4000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020b4000 0x4000>;
 				interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
@@ -584,7 +648,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			kpp: kpp at 020b8000 {
+			kpp: kpp at 20b8000 {
 				compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -592,14 +656,14 @@
 				status = "disabled";
 			};
 
-			wdog1: wdog at 020bc000 {
+			wdog1: wdog at 20bc000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_DUMMY>;
 			};
 
-			wdog2: wdog at 020c0000 {
+			wdog2: wdog at 20c0000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -607,7 +671,7 @@
 				status = "disabled";
 			};
 
-			clks: ccm at 020c4000 {
+			clks: ccm at 20c4000 {
 				compatible = "fsl,imx6q-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -615,7 +679,7 @@
 				#clock-cells = <1>;
 			};
 
-			anatop: anatop at 020c8000 {
+			anatop: anatop at 20c8000 {
 				compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
 				reg = <0x020c8000 0x1000>;
 				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
@@ -625,8 +689,8 @@
 				regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1375000>;
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x110>;
 					anatop-vol-bit-shift = <8>;
@@ -634,6 +698,7 @@
 					anatop-min-bit-val = <4>;
 					anatop-min-voltage = <800000>;
 					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-3p0 {
@@ -648,20 +713,22 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2625000>;
 					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
-					regulator-min-microvolt = <2000000>;
+					regulator-min-microvolt = <2250000>;
 					regulator-max-microvolt = <2750000>;
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

arch/arm/dts/imx6qp-sabreauto.dts new file +28 -0
new file mode 100644
index 0000000..d4caeeb

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b0b0

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b0b0

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b018

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b018

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b018

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b018

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b018

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b018

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b018

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b018

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b018

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b018

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b018

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x1b018

arch/arm/dts/imx6qp-sabreauto.dts new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

0x4001b0a8

arch/arm/dts/imx6qp-sabreauto.dts new file +13 -0

Lines of this file are not shown. View the raw message.

arch/arm/dts/imx6qp-sabresd.dts new file +55 -0
new file mode 100644
index 0000000..f1b9cb1

Lines of this file are not shown. View the raw message.

arch/arm/dts/imx6qp.dtsi new file +100 -0
new file mode 100644
index 0000000..5f51f8e

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

IMX6QDL_CLK_LDB_DI1_SEL>,

arch/arm/dts/imx6qp.dtsi new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

IMX6QDL_CLK_IPU1_DI1_SEL>,

arch/arm/dts/imx6qp.dtsi new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

IMX6QDL_CLK_IPU2_DI1_SEL>,

arch/arm/dts/imx6qp.dtsi new file +1 -0

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

IMX6QDL_CLK_LDB_DI1_PODF>;

arch/arm/dts/imx6qp.dtsi new file +12 -1

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

2.7.4

Part of the diff is not shown here. View the raw message.

author
#21 lore raw

PATCH v2 10/22 arm: imx: Add FIT SPL its

In reply to Abel Vesa

Add simple its in order to allow SPL to boot u-boot proper via FIT table.

---
 arch/arm/mach-imx/mx6/fit_spl.its | 41 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 arch/arm/mach-imx/mx6/fit_spl.its
arch/arm/mach-imx/mx6/fit_spl.its new file +41 -0
new file mode 100644
index 0000000..bf3ffee
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2018 NXP
+ *
+ * Simple U-boot fit source file containing U-Boot (with dtb appended)
+ */
+
+/dts-v1/;
+
+/ {
+	description = "Image for u-boot proper (with dtb appended)";
+	#address-cells = <1>;
+
+	images {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		uboot at 1 {
+			reg = <0>;
+			description = "U-Boot";
+			data = /incbin/("../../../../u-boot-fit-dtb.bin");
+			type = "standalone";
+			os = "U-Boot";
+			compression = "none";
+			arch = "arm";
+			load = <0x17800000>;
+		};
+	};
+
+	configurations {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		default = "conf at 1";
+
+		conf at 1 {
+			reg = <0>;
+			description = "i.MX armv7";
+			loadables = "uboot at 1";
+		};
+	};
+};
Signature · 1 line
2.7.4
author
#22 lore raw

PATCH v2 11/22 configs: mx6sabreauto: Add SPL FIT and DM support

Enable all the necessary configs for SPL DM and FIT support for mx6sabreauto.

---
 configs/mx6sabreauto_defconfig | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)
configs/mx6sabreauto_defconfig +16 -1
index 4bdcbb1..c64ec66 100644
@@ -4,19 +4,28 @@ CONFIG_SYS_TEXT_BASE=0x17800000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_MX6SABREAUTO=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_NXP_BOARD_REVISION=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x400
+CONFIG_FIT=y
+CONFIG_SPL_FIT_PRINT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_SOURCE="arch/arm/mach-imx/mx6/fit_spl.its"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
@@ -40,8 +49,15 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabreauto"
+CONFIG_OF_LIST="imx6dl-sabreauto imx6q-sabreauto imx6qp-sabreauto"
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_SF=y
 CONFIG_DM_MMC=y
@@ -68,4 +84,3 @@ CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_VIDEO=y
 # CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
Signature · 1 line
2.7.4
#23 lore raw

PATCH v2 11/22 configs: mx6sabreauto: Add SPL FIT and DM support

Quoted 27 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:35
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 11/22] configs: mx6sabreauto: Add SPL FIT and DM support

Enable all the necessary configs for SPL DM and FIT support for mx6sabreauto.

---
 configs/mx6sabreauto_defconfig | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)
(quoted diff) +0 -0

b/configs/mx6sabreauto_defconfig index 4bdcbb1..c64ec66 100644

configs/mx6sabreauto_defconfig +0 -0
@@ -4,19 +4,28 @@ CONFIG_SYS_TEXT_BASE=0x17800000

CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y

configs/mx6sabreauto_defconfig CONFIG_SYS_TEXT_BASE=0x17800000 · line 16

Quoted 10 lines
configs/mx6sabreauto_defconfig +3 -0
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_MX6SABREAUTO=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_NXP_BOARD_REVISION=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x400

Do we need this macro?

Regards,
Peng.

Quoted 38 lines
configs/mx6sabreauto_defconfig +4 -0
+CONFIG_FIT=y
+CONFIG_SPL_FIT_PRINT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_SOURCE="arch/arm/mach-imx/mx6/fit_spl.its"

CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cf g"
# CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y

configs/mx6sabreauto_defconfig +9 -0
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
@@ -40,8 +49,15 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabreauto"
+CONFIG_OF_LIST="imx6dl-sabreauto imx6q-sabreauto imx6qp-sabreauto"
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_SF=y
 CONFIG_DM_MMC=y
@@ -68,4 +84,3 @@ CONFIG_USB_HOST_ETHER=y

CONFIG_USB_ETHER_ASIX=y CONFIG_VIDEO=y # CONFIG_VIDEO_SW_CURSOR is not set -CONFIG_OF_LIBFDT=y --
2.7.4

author
#24 lore raw

PATCH v2 12/22 configs: mx6sabresd: Add SPL FIT and DM support

In reply to Abel Vesa

Enable all the necessary configs for SPL DM and FIT support for mx6sabresd.

---
 configs/mx6sabresd_defconfig | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)
configs/mx6sabresd_defconfig +21 -2
index 3babfd5..2b585b2 100644
@@ -4,18 +4,27 @@ CONFIG_SYS_TEXT_BASE=0x17800000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_MX6SABRESD=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x400
+CONFIG_FIT=y
+CONFIG_SPL_FIT_PRINT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_SOURCE="arch/arm/mach-imx/mx6/fit_spl.its"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
@@ -47,23 +56,34 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_EFI_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd"
+CONFIG_OF_LIST="imx6q-sabresd imx6qp-sabresd imx6dl-sabresd"
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_OF_LIST="imx6dl-sabresd imx6q-sabresd imx6qp-sabresd"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SPL_DM=y
 CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_FASTBOOT_BUF_SIZE=0x10000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=2
+CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
-CONFIG_USB_STORAGE=y
+CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
@@ -73,4 +93,3 @@ CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_VIDEO=y
 # CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
Signature · 1 line
2.7.4
#25 lore raw

PATCH v2 12/22 configs: mx6sabresd: Add SPL FIT and DM support

Quoted 25 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:35
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 12/22] configs: mx6sabresd: Add SPL FIT and DM support

Enable all the necessary configs for SPL DM and FIT support for mx6sabresd.

---
 configs/mx6sabresd_defconfig | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)
configs/mx6sabresd_defconfig +0 -0
index 3babfd5..2b585b2 100644
@@ -4,18 +4,27 @@ CONFIG_SYS_TEXT_BASE=0x17800000

CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y

configs/mx6sabresd_defconfig CONFIG_SYS_TEXT_BASE=0x17800000 · line 15

Quoted 9 lines
configs/mx6sabresd_defconfig +3 -0
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_MX6SABRESD=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x400

Do we need this macro?

Regards,
Peng

Quoted 57 lines
configs/mx6sabresd_defconfig +4 -0
+CONFIG_FIT=y
+CONFIG_SPL_FIT_PRINT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_SOURCE="arch/arm/mach-imx/mx6/fit_spl.its"

CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cf g"
# CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y

configs/mx6sabresd_defconfig +2 -0
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
@@ -47,23 +56,34 @@ CONFIG_CMD_EXT4_WRITE=y

CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y
CONFIG_EFI_PARTITION=y

configs/mx6sabresd_defconfig +12 -1
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd"
+CONFIG_OF_LIST="imx6q-sabresd imx6qp-sabresd imx6dl-sabresd"
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_OF_LIST="imx6dl-sabresd imx6q-sabresd imx6qp-sabresd"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SPL_DM=y
 CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_FASTBOOT_BUF_SIZE=0x10000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=2
+CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
-CONFIG_USB_STORAGE=y
+CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
@@ -73,4 +93,3 @@ CONFIG_USB_HOST_ETHER=y

CONFIG_USB_ETHER_ASIX=y CONFIG_VIDEO=y # CONFIG_VIDEO_SW_CURSOR is not set -CONFIG_OF_LIBFDT=y --
2.7.4

author
#26 lore raw

PATCH v2 13/22 mx6sabreauto: Add DM_GPIO support

In reply to Abel Vesa

Add the DM_GPIO related config for mx6sabreauto.
Also add the gpio request calls.

---
 board/freescale/mx6sabreauto/mx6sabreauto.c | 3 +++
 configs/mx6sabreauto_defconfig              | 1 +
 2 files changed, 4 insertions(+)
board/freescale/mx6sabreauto/mx6sabreauto.c +3 -0
index c8f1263..c7e3e67 100644
@@ -501,6 +501,7 @@ iomux_v3_cfg_t const backlight_pads[] = {
 
 static void setup_iomux_backlight(void)
 {
+	gpio_request(IMX_GPIO_NR(2, 9), "backlight");
 	gpio_direction_output(IMX_GPIO_NR(2, 9), 1);
 	SETUP_IOMUX_PADS(backlight_pads);
 }
@@ -594,6 +595,7 @@ int board_init(void)
 	else
 		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
 	/* I2C 3 Steer */
+	gpio_request(IMX_GPIO_NR(5, 4), "steer logic");
 	gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
 	SETUP_IOMUX_PADS(i2c3_pads);
 #ifndef CONFIG_SYS_FLASH_CFI
@@ -602,6 +604,7 @@ int board_init(void)
 	else
 		setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info2);
 #endif
+	gpio_request(IMX_GPIO_NR(1, 15), "expander en");
 	gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
 	SETUP_IOMUX_PADS(port_exp);
 
configs/mx6sabreauto_defconfig +1 -0
index c64ec66..4a9739c 100644
@@ -60,6 +60,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_SF=y
+CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_NAND=y
Signature · 1 line
2.7.4
#27 lore raw

PATCH v2 13/22 mx6sabreauto: Add DM_GPIO support

Quoted 54 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:35
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 13/22] mx6sabreauto: Add DM_GPIO support

Add the DM_GPIO related config for mx6sabreauto.
Also add the gpio request calls.

---
 board/freescale/mx6sabreauto/mx6sabreauto.c | 3 +++
 configs/mx6sabreauto_defconfig              | 1 +
 2 files changed, 4 insertions(+)
board/freescale/mx6sabreauto/mx6sabreauto.c +2 -0
index c8f1263..c7e3e67 100644
@@ -501,6 +501,7 @@ iomux_v3_cfg_t const backlight_pads[] = {
 
 static void setup_iomux_backlight(void)  {
+	gpio_request(IMX_GPIO_NR(2, 9), "backlight");
 	gpio_direction_output(IMX_GPIO_NR(2, 9), 1);
 	SETUP_IOMUX_PADS(backlight_pads);
 }
@@ -594,6 +595,7 @@ int board_init(void)
 	else
 		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f,
 &mx6dl_i2c_pad_info1);
 	/* I2C 3 Steer */
+	gpio_request(IMX_GPIO_NR(5, 4), "steer logic");
 	gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
 	SETUP_IOMUX_PADS(i2c3_pads);

#ifndef CONFIG_SYS_FLASH_CFI

board/freescale/mx6sabreauto/mx6sabreauto.c +1 -0
@@ -602,6 +604,7 @@ int board_init(void)
 	else
 		setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info2);
 #endif
+	gpio_request(IMX_GPIO_NR(1, 15), "expander en");
 	gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
 	SETUP_IOMUX_PADS(port_exp);
 
(quoted diff) +0 -0

b/configs/mx6sabreauto_defconfig index c64ec66..4a9739c 100644

configs/mx6sabreauto_defconfig CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y · line 66

Quoted 7 lines
configs/mx6sabreauto_defconfig +1 -0
@@ -60,6 +60,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_SF=y
+CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_NAND=y
Quoted 2 lines

--
2.7.4

author
#28 lore raw

PATCH v2 14/22 mx6sabresd: Add DM_GPIO support

In reply to Abel Vesa

Add the DM_GPIO related config for mx6sabresd.
Also add the gpio request calls.

---
 board/freescale/mx6sabresd/mx6sabresd.c | 5 +++++
 configs/mx6sabresd_defconfig            | 1 +
 2 files changed, 6 insertions(+)
board/freescale/mx6sabresd/mx6sabresd.c +5 -0
index 4688095..99002bd 100644
@@ -96,6 +96,7 @@ static void setup_iomux_enet(void)
 	SETUP_IOMUX_PADS(enet_pads);
 
 	/* Reset AR8031 PHY */
+	gpio_request(IMX_GPIO_NR(1, 25), "ENET PHY Reset");
 	gpio_direction_output(IMX_GPIO_NR(1, 25) , 0);
 	mdelay(10);
 	gpio_set_value(IMX_GPIO_NR(1, 25), 1);
@@ -189,6 +190,7 @@ static iomux_v3_cfg_t const bl_pads[] = {
 static void enable_backlight(void)
 {
 	SETUP_IOMUX_PADS(bl_pads);
+	gpio_request(DISP0_PWR_EN, "Display Power Enable");
 	gpio_direction_output(DISP0_PWR_EN, 1);
 }
 
@@ -307,11 +309,13 @@ int board_mmc_init(bd_t *bis)
 		switch (i) {
 		case 0:
 			SETUP_IOMUX_PADS(usdhc2_pads);
+			gpio_request(USDHC2_CD_GPIO, "USDHC2 CD");
 			gpio_direction_input(USDHC2_CD_GPIO);
 			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 			break;
 		case 1:
 			SETUP_IOMUX_PADS(usdhc3_pads);
+			gpio_request(USDHC3_CD_GPIO, "USDHC3 CD");
 			gpio_direction_input(USDHC3_CD_GPIO);
 			usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 			break;
@@ -729,6 +733,7 @@ int checkboard(void)
 #ifdef CONFIG_SPL_OS_BOOT
 int spl_start_uboot(void)
 {
+	gpio_request(KEY_VOL_UP, "KEY Volume UP");
 	gpio_direction_input(KEY_VOL_UP);
 
 	/* Only enter in Falcon mode if KEY_VOL_UP is pressed */
configs/mx6sabresd_defconfig +1 -0
index 2b585b2..4f3a619 100644
@@ -71,6 +71,7 @@ CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_FASTBOOT_BUF_SIZE=0x10000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=2
+CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
Signature · 1 line
2.7.4
#29 lore raw

PATCH v2 14/22 mx6sabresd: Add DM_GPIO support

Quoted 63 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:35
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 14/22] mx6sabresd: Add DM_GPIO support

Add the DM_GPIO related config for mx6sabresd.
Also add the gpio request calls.

---
 board/freescale/mx6sabresd/mx6sabresd.c | 5 +++++
 configs/mx6sabresd_defconfig            | 1 +
 2 files changed, 6 insertions(+)
board/freescale/mx6sabresd/mx6sabresd.c +1 -0
index 4688095..99002bd 100644
@@ -96,6 +96,7 @@ static void setup_iomux_enet(void)
 	SETUP_IOMUX_PADS(enet_pads);
 
 	/* Reset AR8031 PHY */
+	gpio_request(IMX_GPIO_NR(1, 25), "ENET PHY Reset");
 	gpio_direction_output(IMX_GPIO_NR(1, 25) , 0);
 	mdelay(10);
 	gpio_set_value(IMX_GPIO_NR(1, 25), 1); @@ -189,6 +190,7 @@ static

iomux_v3_cfg_t const bl_pads[] = { static void enable_backlight(void) {

board/freescale/mx6sabresd/mx6sabresd.c +4 -0
 	SETUP_IOMUX_PADS(bl_pads);
+	gpio_request(DISP0_PWR_EN, "Display Power Enable");
 	gpio_direction_output(DISP0_PWR_EN, 1);  }
@@ -307,11 +309,13 @@ int board_mmc_init(bd_t *bis)
 		switch (i) {
 		case 0:
 			SETUP_IOMUX_PADS(usdhc2_pads);
+			gpio_request(USDHC2_CD_GPIO, "USDHC2 CD");
 			gpio_direction_input(USDHC2_CD_GPIO);
 			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 			break;
 		case 1:
 			SETUP_IOMUX_PADS(usdhc3_pads);
+			gpio_request(USDHC3_CD_GPIO, "USDHC3 CD");
 			gpio_direction_input(USDHC3_CD_GPIO);
 			usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 			break;
@@ -729,6 +733,7 @@ int checkboard(void)  #ifdef CONFIG_SPL_OS_BOOT
 int spl_start_uboot(void)  {
+	gpio_request(KEY_VOL_UP, "KEY Volume UP");
 	gpio_direction_input(KEY_VOL_UP);
 
 	/* Only enter in Falcon mode if KEY_VOL_UP is pressed */ diff --git

a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index 2b585b2..4f3a619 100644

configs/mx6sabresd_defconfig CONFIG_FASTBOOT_BUF_ADDR=0x12000000 · line 77

Quoted 7 lines
configs/mx6sabresd_defconfig +1 -0
@@ -71,6 +71,7 @@ CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_FASTBOOT_BUF_SIZE=0x10000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=2
+CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
Quoted 2 lines

--
2.7.4

author
#30 lore raw

PATCH v2 15/22 configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs

In reply to Abel Vesa

Enable all neceassary configs to support DM_SPI_FLASH on mx6sabreauto.

---
 configs/mx6sabreauto_defconfig | 2 ++
 1 file changed, 2 insertions(+)
configs/mx6sabreauto_defconfig +2 -0
index 4a9739c..e1b4b2f 100644
@@ -65,12 +65,14 @@ CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_NAND=y
 CONFIG_NAND_MXS=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
 CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
Signature · 1 line
2.7.4
#31 lore raw

PATCH v2 15/22 configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs

Quoted 28 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:35
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 15/22] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs

Enable all neceassary configs to support DM_SPI_FLASH on mx6sabreauto.

---
 configs/mx6sabreauto_defconfig | 2 ++
 1 file changed, 2 insertions(+)
(quoted diff) +0 -0

b/configs/mx6sabreauto_defconfig index 4a9739c..e1b4b2f 100644

configs/mx6sabreauto_defconfig +1 -0
@@ -65,12 +65,14 @@ CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_NAND=y
 CONFIG_NAND_MXS=y
+CONFIG_DM_SPI_FLASH=y

configs/mx6sabreauto_defconfig CONFIG_DM_MMC=y · line 78

Quoted 10 lines
configs/mx6sabreauto_defconfig +1 -0
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
 CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
Quoted 2 lines

--
2.7.4

author
#32 lore raw

PATCH v2 16/22 configs: mx6sabresd: Add DM_SPI_FLASH necessary configs

In reply to Abel Vesa

Enable all neceassary configs to support DM_SPI_FLASH on mx6sabresd.

---
 configs/mx6sabresd_defconfig | 2 ++
 1 file changed, 2 insertions(+)
configs/mx6sabresd_defconfig +2 -0
index 4f3a619..14adf65 100644
@@ -74,6 +74,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=2
 CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
@@ -81,6 +82,7 @@ CONFIG_MII=y
 CONFIG_PCI=y
 CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
Signature · 1 line
2.7.4
#33 lore raw

PATCH v2 16/22 configs: mx6sabresd: Add DM_SPI_FLASH necessary configs

Quoted 30 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:35
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 16/22] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs

Enable all neceassary configs to support DM_SPI_FLASH on mx6sabresd.

---
 configs/mx6sabresd_defconfig | 2 ++
 1 file changed, 2 insertions(+)
configs/mx6sabresd_defconfig +0 -0
index 4f3a619..14adf65 100644
@@ -74,6 +74,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=2

CONFIG_DM_GPIO=y CONFIG_DM_MMC=y CONFIG_FSL_ESDHC=y

configs/mx6sabresd_defconfig +1 -0
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y

configs/mx6sabresd_defconfig CONFIG_MII=y · line 88

Quoted 7 lines
configs/mx6sabresd_defconfig +1 -0
@@ -81,6 +82,7 @@ CONFIG_MII=y
 CONFIG_PCI=y
 CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
Quoted 2 lines

--
2.7.4

author
#34 lore raw

PATCH v2 17/22 board: mx6sabreauto: Remove the non-DM code

In reply to Abel Vesa

Since the mx6sabreauto has DM support, remove the unused non-DM code from mx6sabreauto board file.

---
 board/freescale/mx6sabreauto/mx6sabreauto.c | 70 -----------------------------
 1 file changed, 70 deletions(-)
board/freescale/mx6sabreauto/mx6sabreauto.c +0 -70
index c7e3e67..dd72de9 100644
@@ -159,44 +159,6 @@ static iomux_v3_cfg_t const port_exp[] = {
 	IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15	| MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
-/*Define for building port exp gpio, pin starts from 0*/
-#define PORTEXP_IO_NR(chip, pin) \
-	((chip << 5) + pin)
-
-/*Get the chip addr from a ioexp gpio*/
-#define PORTEXP_IO_TO_CHIP(gpio_nr) \
-	(gpio_nr >> 5)
-
-/*Get the pin number from a ioexp gpio*/
-#define PORTEXP_IO_TO_PIN(gpio_nr) \
-	(gpio_nr & 0x1f)
-
-static int port_exp_direction_output(unsigned gpio, int value)
-{
-	int ret;
-
-	i2c_set_bus_num(2);
-	ret = i2c_probe(PORTEXP_IO_TO_CHIP(gpio));
-	if (ret)
-		return ret;
-
-	ret = pca953x_set_dir(PORTEXP_IO_TO_CHIP(gpio),
-		(1 << PORTEXP_IO_TO_PIN(gpio)),
-		(PCA953X_DIR_OUT << PORTEXP_IO_TO_PIN(gpio)));
-
-	if (ret)
-		return ret;
-
-	ret = pca953x_set_val(PORTEXP_IO_TO_CHIP(gpio),
-		(1 << PORTEXP_IO_TO_PIN(gpio)),
-		(value << PORTEXP_IO_TO_PIN(gpio)));
-
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
 #ifdef CONFIG_MTD_NOR_FLASH
 static iomux_v3_cfg_t const eimnor_pads[] = {
 	IOMUX_PADS(PAD_EIM_D16__EIM_DATA16	| MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
@@ -681,19 +643,10 @@ int checkboard(void)
 }
 
 #ifdef CONFIG_USB_EHCI_MX6
-#define USB_HOST1_PWR     PORTEXP_IO_NR(0x32, 7)
-#define USB_OTG_PWR       PORTEXP_IO_NR(0x34, 1)
-
-iomux_v3_cfg_t const usb_otg_pads[] = {
-	IOMUX_PADS(PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
 int board_ehci_hcd_init(int port)
 {
 	switch (port) {
 	case 0:
-		SETUP_IOMUX_PADS(usb_otg_pads);
-
 		/*
 		  * Set daisy chain for otg_pin_id on 6q.
 		 *  For 6dl, this bit is reserved.
@@ -708,29 +661,6 @@ int board_ehci_hcd_init(int port)
 	}
 	return 0;
 }
-
-int board_ehci_power(int port, int on)
-{
-	switch (port) {
-	case 0:
-		if (on)
-			port_exp_direction_output(USB_OTG_PWR, 1);
-		else
-			port_exp_direction_output(USB_OTG_PWR, 0);
-		break;
-	case 1:
-		if (on)
-			port_exp_direction_output(USB_HOST1_PWR, 1);
-		else
-			port_exp_direction_output(USB_HOST1_PWR, 0);
-		break;
-	default:
-		printf("MXC USB port %d not yet supported\n", port);
-		return -EINVAL;
-	}
-
-	return 0;
-}
 #endif
 
 #ifdef CONFIG_SPL_BUILD
Signature · 1 line
2.7.4
#35 lore raw

PATCH v2 17/22 board: mx6sabreauto: Remove the non-DM code

Quoted 11 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:35
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 17/22] board: mx6sabreauto: Remove the non-DM code

Quoted 2 lines

Since the mx6sabreauto has DM support, remove the unused non-DM code from mx6sabreauto board file.

Has DM_PCA953X been enabled?

Regards,
Peng.

Quoted 110 lines
---
 board/freescale/mx6sabreauto/mx6sabreauto.c | 70
-----------------------------
 1 file changed, 70 deletions(-)
board/freescale/mx6sabreauto/mx6sabreauto.c +0 -7
index c7e3e67..dd72de9 100644
@@ -159,44 +159,6 @@ static iomux_v3_cfg_t const port_exp[] = {
 	IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15	|
 MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
-/*Define for building port exp gpio, pin starts from 0*/ -#define
 PORTEXP_IO_NR(chip, pin) \
-	((chip << 5) + pin)
-
-/*Get the chip addr from a ioexp gpio*/ -#define
 PORTEXP_IO_TO_CHIP(gpio_nr) \
-	(gpio_nr >> 5)
-
-/*Get the pin number from a ioexp gpio*/ -#define

PORTEXP_IO_TO_PIN(gpio_nr) \

board/freescale/mx6sabreauto/mx6sabreauto.c +0 -27
-	(gpio_nr & 0x1f)
-
-static int port_exp_direction_output(unsigned gpio, int value) -{
-	int ret;
-
-	i2c_set_bus_num(2);
-	ret = i2c_probe(PORTEXP_IO_TO_CHIP(gpio));
-	if (ret)
-		return ret;
-
-	ret = pca953x_set_dir(PORTEXP_IO_TO_CHIP(gpio),
-		(1 << PORTEXP_IO_TO_PIN(gpio)),
-		(PCA953X_DIR_OUT << PORTEXP_IO_TO_PIN(gpio)));
-
-	if (ret)
-		return ret;
-
-	ret = pca953x_set_val(PORTEXP_IO_TO_CHIP(gpio),
-		(1 << PORTEXP_IO_TO_PIN(gpio)),
-		(value << PORTEXP_IO_TO_PIN(gpio)));
-
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
 #ifdef CONFIG_MTD_NOR_FLASH
 static iomux_v3_cfg_t const eimnor_pads[] = {
 	IOMUX_PADS(PAD_EIM_D16__EIM_DATA16	|

MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),

board/freescale/mx6sabreauto/mx6sabreauto.c +0 -33
@@ -681,19 +643,10 @@ int checkboard(void)  }
 
 #ifdef CONFIG_USB_EHCI_MX6
-#define USB_HOST1_PWR     PORTEXP_IO_NR(0x32, 7)
-#define USB_OTG_PWR       PORTEXP_IO_NR(0x34, 1)
-
-iomux_v3_cfg_t const usb_otg_pads[] = {
-	IOMUX_PADS(PAD_ENET_RX_ER__USB_OTG_ID |
 MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
 int board_ehci_hcd_init(int port)
 {
 	switch (port) {
 	case 0:
-		SETUP_IOMUX_PADS(usb_otg_pads);
-
 		/*
 		  * Set daisy chain for otg_pin_id on 6q.
 		 *  For 6dl, this bit is reserved.
@@ -708,29 +661,6 @@ int board_ehci_hcd_init(int port)
 	}
 	return 0;
 }
-
-int board_ehci_power(int port, int on)
-{
-	switch (port) {
-	case 0:
-		if (on)
-			port_exp_direction_output(USB_OTG_PWR, 1);
-		else
-			port_exp_direction_output(USB_OTG_PWR, 0);
-		break;
-	case 1:
-		if (on)
-			port_exp_direction_output(USB_HOST1_PWR, 1);
-		else
-			port_exp_direction_output(USB_HOST1_PWR, 0);
-		break;
-	default:
-		printf("MXC USB port %d not yet supported\n", port);
-		return -EINVAL;
-	}
-
-	return 0;
-}
 #endif
 
 #ifdef CONFIG_SPL_BUILD
--

2.7.4

author
#36 lore raw

PATCH v2 17/22 board: mx6sabreauto: Remove the non-DM code

Quoted 11 lines · Peng Fan
Quoted 11 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:35
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 17/22] board: mx6sabreauto: Remove the non-DM code

Quoted 5 lines
Quoted 2 lines

Since the mx6sabreauto has DM support, remove the unused non-DM code from mx6sabreauto board file.

Has DM_PCA953X been enabled?

No. Why?

Quoted 114 lines

Regards,
Peng.

Quoted 110 lines
---
 board/freescale/mx6sabreauto/mx6sabreauto.c | 70
-----------------------------
 1 file changed, 70 deletions(-)
board/freescale/mx6sabreauto/mx6sabreauto.c +0 -7
index c7e3e67..dd72de9 100644
@@ -159,44 +159,6 @@ static iomux_v3_cfg_t const port_exp[] = {
 	IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15	|
 MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
-/*Define for building port exp gpio, pin starts from 0*/ -#define
 PORTEXP_IO_NR(chip, pin) \
-	((chip << 5) + pin)
-
-/*Get the chip addr from a ioexp gpio*/ -#define
 PORTEXP_IO_TO_CHIP(gpio_nr) \
-	(gpio_nr >> 5)
-
-/*Get the pin number from a ioexp gpio*/ -#define

PORTEXP_IO_TO_PIN(gpio_nr) \

board/freescale/mx6sabreauto/mx6sabreauto.c +0 -27
-	(gpio_nr & 0x1f)
-
-static int port_exp_direction_output(unsigned gpio, int value) -{
-	int ret;
-
-	i2c_set_bus_num(2);
-	ret = i2c_probe(PORTEXP_IO_TO_CHIP(gpio));
-	if (ret)
-		return ret;
-
-	ret = pca953x_set_dir(PORTEXP_IO_TO_CHIP(gpio),
-		(1 << PORTEXP_IO_TO_PIN(gpio)),
-		(PCA953X_DIR_OUT << PORTEXP_IO_TO_PIN(gpio)));
-
-	if (ret)
-		return ret;
-
-	ret = pca953x_set_val(PORTEXP_IO_TO_CHIP(gpio),
-		(1 << PORTEXP_IO_TO_PIN(gpio)),
-		(value << PORTEXP_IO_TO_PIN(gpio)));
-
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
 #ifdef CONFIG_MTD_NOR_FLASH
 static iomux_v3_cfg_t const eimnor_pads[] = {
 	IOMUX_PADS(PAD_EIM_D16__EIM_DATA16	|

MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),

board/freescale/mx6sabreauto/mx6sabreauto.c +0 -33
@@ -681,19 +643,10 @@ int checkboard(void)  }
 
 #ifdef CONFIG_USB_EHCI_MX6
-#define USB_HOST1_PWR     PORTEXP_IO_NR(0x32, 7)
-#define USB_OTG_PWR       PORTEXP_IO_NR(0x34, 1)
-
-iomux_v3_cfg_t const usb_otg_pads[] = {
-	IOMUX_PADS(PAD_ENET_RX_ER__USB_OTG_ID |
 MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
 int board_ehci_hcd_init(int port)
 {
 	switch (port) {
 	case 0:
-		SETUP_IOMUX_PADS(usb_otg_pads);
-
 		/*
 		  * Set daisy chain for otg_pin_id on 6q.
 		 *  For 6dl, this bit is reserved.
@@ -708,29 +661,6 @@ int board_ehci_hcd_init(int port)
 	}
 	return 0;
 }
-
-int board_ehci_power(int port, int on)
-{
-	switch (port) {
-	case 0:
-		if (on)
-			port_exp_direction_output(USB_OTG_PWR, 1);
-		else
-			port_exp_direction_output(USB_OTG_PWR, 0);
-		break;
-	case 1:
-		if (on)
-			port_exp_direction_output(USB_HOST1_PWR, 1);
-		else
-			port_exp_direction_output(USB_HOST1_PWR, 0);
-		break;
-	default:
-		printf("MXC USB port %d not yet supported\n", port);
-		return -EINVAL;
-	}
-
-	return 0;
-}
 #endif
 
 #ifdef CONFIG_SPL_BUILD
--

2.7.4

author
#37 lore raw

PATCH v2 18/22 board: mx6sabresd: Remove non-DM code

In reply to Abel Vesa

Since the mx6sabreauto has DM support, remove the unused non-DM code from mx6sabresd board file.

---
 board/freescale/mx6sabresd/mx6sabresd.c | 50 ---------------------------------
 1 file changed, 50 deletions(-)
board/freescale/mx6sabresd/mx6sabresd.c +0 -50
index 99002bd..0824a05 100644
@@ -563,63 +563,13 @@ int board_eth_init(bd_t *bis)
 }
 
 #ifdef CONFIG_USB_EHCI_MX6
-#define USB_OTHERREGS_OFFSET	0x800
-#define UCTRL_PWR_POL		(1 << 9)
-
-static iomux_v3_cfg_t const usb_otg_pads[] = {
-	IOMUX_PADS(PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)),
-	IOMUX_PADS(PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usb_hc1_pads[] = {
-	IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
 static void setup_usb(void)
 {
-	SETUP_IOMUX_PADS(usb_otg_pads);
-
 	/*
 	 * set daisy chain for otg_pin_id on 6q.
 	 * for 6dl, this bit is reserved
 	 */
 	imx_iomux_set_gpr_register(1, 13, 1, 0);
-
-	SETUP_IOMUX_PADS(usb_hc1_pads);
-}
-
-int board_ehci_hcd_init(int port)
-{
-	u32 *usbnc_usb_ctrl;
-
-	if (port > 1)
-		return -EINVAL;
-
-	usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
-				 port * 4);
-
-	setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
-
-	return 0;
-}
-
-int board_ehci_power(int port, int on)
-{
-	switch (port) {
-	case 0:
-		break;
-	case 1:
-		if (on)
-			gpio_direction_output(IMX_GPIO_NR(1, 29), 1);
-		else
-			gpio_direction_output(IMX_GPIO_NR(1, 29), 0);
-		break;
-	default:
-		printf("MXC USB port %d not yet supported\n", port);
-		return -EINVAL;
-	}
-
-	return 0;
 }
 #endif
 
Signature · 1 line
2.7.4
author
#38 lore raw

PATCH v2 19/22 board: mx6sabresd: Remove the enet reset gpio handling

In reply to Abel Vesa

Rely on the phy-reset-gpios which is set in imx6qdl-sabresd dtsi and get rid of the enet reset gpio handling from the board file.

---
 board/freescale/mx6sabresd/mx6sabresd.c | 7 -------
 1 file changed, 7 deletions(-)
board/freescale/mx6sabresd/mx6sabresd.c +0 -7
index 0824a05..385a18e 100644
@@ -94,13 +94,6 @@ static iomux_v3_cfg_t const enet_pads[] = {
 static void setup_iomux_enet(void)
 {
 	SETUP_IOMUX_PADS(enet_pads);
-
-	/* Reset AR8031 PHY */
-	gpio_request(IMX_GPIO_NR(1, 25), "ENET PHY Reset");
-	gpio_direction_output(IMX_GPIO_NR(1, 25) , 0);
-	mdelay(10);
-	gpio_set_value(IMX_GPIO_NR(1, 25), 1);
-	udelay(100);
 }
 
 static iomux_v3_cfg_t const usdhc2_pads[] = {
Signature · 1 line
2.7.4
author
#39 lore raw

PATCH v2 20/22 configs: mx6sabresd: Reduce size for SPL by disabling SPL_DOS and SPL_EFI

In reply to Abel Vesa

With DM and FIT enabled in SPL, there is an sram overflow. By disabling CONFIG_SPL_DOS_PARTITION and CONFIG_SPL_EFI_PARTITION, we get to keep the 'one binary to fit all' for imx6[q|qp|dl] on sabresd since the final SPL image is now under 64KB.

---
 configs/mx6sabresd_defconfig | 2 ++
 1 file changed, 2 insertions(+)
configs/mx6sabresd_defconfig +2 -0
index 14adf65..26d30fd 100644
@@ -56,6 +56,8 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_EFI_PARTITION=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd"
Signature · 1 line
2.7.4
author
#40 lore raw

PATCH v2 21/22 board: mx6sabreauto: Update README with the SPL DM FIT info

In reply to Abel Vesa

There is a new step now. The need to build the u-boot.itb. And instead of flashing the .img file, now the .itb file needs to be flashed.

---
 board/freescale/mx6sabreauto/README | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
board/freescale/mx6sabreauto/README +4 -2
index e8c589b..960a7d7 100644
@@ -8,6 +8,7 @@ In order to build it:
 $ make mx6sabreauto_defconfig
 
 $ make
+$ make u-boot.itb
 
 This will generate the SPL and u-boot.img binaries.
 
@@ -17,7 +18,7 @@ $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
 
 - Flash the u-boot.img binary into the SD card:
 
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
+$ sudo dd if=u-boot.itb of=/dev/sdX bs=1K seek=69 && sync
 
 Booting via Falcon mode
 -----------------------
@@ -31,6 +32,7 @@ In order to build it:
 $ make mx6sabreauto_defconfig
 
 $ make
+$ make u-boot.itb
 
 This will generate the SPL image called SPL and the u-boot.img.
 
@@ -40,7 +42,7 @@ $ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync
 
 - Flash the u-boot.img image into the SD card:
 
-$ sudo dd if=u-boot.img of=/dev/sdb bs=1K seek=69 && sync
+$ sudo dd if=u-boot.itb of=/dev/sdb bs=1K seek=69 && sync
 
 Create a FAT16 boot partition to store uImage and the dtb file, then copy the files there:
 
Signature · 1 line
2.7.4
author
#41 lore raw

PATCH v2 22/22 board: mx6sabresd: Update README with the SPL DM FIT info

In reply to Abel Vesa

There is a new step now. The need to build the u-boot.itb. And instead of flashing the .img file, now the .itb file needs to be flashed.

---
 board/freescale/mx6sabresd/README | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
board/freescale/mx6sabresd/README +6 -3
index 4b4df06..9b7f7cd 100644
@@ -20,6 +20,7 @@ In order to build it:
 $ make mx6sabresd_defconfig
 
 $ make
+$ make u-boot.itb
 
 This will generate the SPL and u-boot.img binaries.
 
@@ -29,7 +30,7 @@ $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
 
 - Flash the u-boot.img binary into the SD card:
 
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
+$ sudo dd if=u-boot.itb of=/dev/sdX bs=1K seek=69 && sync
 
 
 2. Booting from eMMC
@@ -38,6 +39,7 @@ $ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
 $ make mx6sabresd_defconfig
 
 $ make
+$ make u-boot.itb
 
 This will generate the SPL and u-boot.img binaries.
 
@@ -54,7 +56,7 @@ Mount the eMMC in the host PC:
 - Flash SPL and u-boot.img binaries into the eMMC:
 
 $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
+$ sudo dd if=u-boot.itb of=/dev/sdX bs=1K seek=69 && sync
 
 Set SW6 to eMMC 8-bit boot: 11010110
 
@@ -64,6 +66,7 @@ Set SW6 to eMMC 8-bit boot: 11010110
 
 $ make mx6sabresd_defconfig
 $ make
+$ make u-boot.itb
 
 This will generate the SPL image called SPL and the u-boot.img.
 
@@ -73,7 +76,7 @@ $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none && sync
 
 - Flash the u-boot.img image into the SD card:
 
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none && sync
+$ sudo dd if=u-boot.itb of=/dev/sdX bs=1K seek=69 oflag=sync status=none && sync
 
 Create a partition for root file system and extract it there:
 
Signature · 1 line
2.7.4
#42 lore raw

PATCH v2 10/22 arm: imx: Add FIT SPL its

In reply to Abel Vesa
Quoted 58 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:35
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 10/22] arm: imx: Add FIT SPL its

Add simple its in order to allow SPL to boot u-boot proper via FIT table.

---
 arch/arm/mach-imx/mx6/fit_spl.its | 41
+++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 arch/arm/mach-imx/mx6/fit_spl.its
arch/arm/mach-imx/mx6/fit_spl.its new file +31 -0
new file mode 100644
index 0000000..bf3ffee
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2018 NXP
+ *
+ * Simple U-boot fit source file containing U-Boot (with dtb appended)
+*/
+
+/dts-v1/;
+
+/ {
+	description = "Image for u-boot proper (with dtb appended)";
+	#address-cells = <1>;
+
+	images {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		uboot at 1 {
+			reg = <0>;
+			description = "U-Boot";
+			data = /incbin/("../../../../u-boot-fit-dtb.bin");
+			type = "standalone";
+			os = "U-Boot";
+			compression = "none";
+			arch = "arm";
+			load = <0x17800000>;
+		};
+	};
+
+	configurations {
+		#address-cells = <1>;
+		#size-cells = <0>;

arch/arm/mach-imx/mx6/fit_spl.its line 41

Quoted 10 lines
arch/arm/mach-imx/mx6/fit_spl.its new file +10 -0
+
+		default = "conf at 1";
+
+		conf at 1 {
+			reg = <0>;
+			description = "i.MX armv7";
+			loadables = "uboot at 1";
+		};
+	};
+};
Quoted 2 lines

--
2.7.4

#43 lore raw

PATCH v2 10/22 arm: imx: Add FIT SPL its

Quoted 61 lines · On Tue, 29 Jan 2019 13:37:46 +0000 Peng Fan <[email protected]> wrote:
Quoted 61 lines

-----Original Message-----
From: Abel Vesa
Sent: 2019年1月29日 19:35
To: Tom Rini <[email protected]>; Fabio Estevam <[email protected]>; u-boot at lists.denx.de; dl-uboot-imx <[email protected]>; Peng Fan <[email protected]>
Cc: Nitin Garg <[email protected]>; Abel Vesa <[email protected]>
Subject: [PATCH v2 10/22] arm: imx: Add FIT SPL its

Add simple its in order to allow SPL to boot u-boot proper via FIT table.

---
 arch/arm/mach-imx/mx6/fit_spl.its | 41
+++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 arch/arm/mach-imx/mx6/fit_spl.its
arch/arm/mach-imx/mx6/fit_spl.its new file +4 -0
new file mode 100644
index 0000000..bf3ffee
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2018 NXP
+ *
+ * Simple U-boot fit source file containing U-Boot (with dtb

appended) +*/

arch/arm/mach-imx/mx6/fit_spl.its new file +5 -0
+
+/dts-v1/;
+
+/ {
+	description = "Image for u-boot proper (with dtb

appended)";

arch/arm/mach-imx/mx6/fit_spl.its new file +10 -0
+	#address-cells = <1>;
+
+	images {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		uboot at 1 {
+			reg = <0>;
+			description = "U-Boot";
+			data

= /incbin/("../../../../u-boot-fit-dtb.bin");

arch/arm/mach-imx/mx6/fit_spl.its new file +13 -0
+			type = "standalone";
+			os = "U-Boot";
+			compression = "none";
+			arch = "arm";
+			load = <0x17800000>;
+		};
+	};
+
+	configurations {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		default = "conf at 1";
Quoted 9 lines

arch/arm/mach-imx/mx6/fit_spl.its line 41

Quoted 8 lines
arch/arm/mach-imx/mx6/fit_spl.its new file +8 -0
+
+		conf at 1 {
+			reg = <0>;
+			description = "i.MX armv7";
+			loadables = "uboot at 1";
+		};
+	};
+};  

Sorry to ask, but why do we need this patch/file?

The fit image for single configuration can be generated with mkimage (and proper flag). TI for example uses it to generate fitImage wrapped u-boot for MLO.

Quoted 9 lines
Quoted 2 lines

--
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190129/713a53cb/attachment.sig>