iw: Add support for controlling tx power for per station
PATCH v2 1/1 iw: Add support for controlling tx power for per station
From: Ashok Raj Nagarajan <[email protected]>
This patch allows userspace to set transmit power, in dBm units, to a station associated to the AP.
To set a limit tx power of 20 dBm:
iw wlan0 station set <mac-addr> txpwr limit 20
To revert the user defined tx power for a station:
iw wlan0 station set <mac-addr> txpwr auto
Co-developed-by Balaji Pothunoori <[email protected]>
Signed-off-by Ashok Raj Nagarajan <[email protected]>
Signed-off-by Balaji Pothunoori <[email protected]>
---
v2: tx power set unit modified from mBm to dBm
replaced NLA_PUT_U32 with NLA_PUT_U8/U16
station.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+)
station.c +71 -0
@@ -651,6 +651,7 @@ COMMAND(station, del, "<MAC address> [subtype <subtype>] [reason-code <code>]",static const struct cmd *station_set_plink;static const struct cmd *station_set_vlan;static const struct cmd *station_set_mesh_power_mode; +static const struct cmd *station_set_txpwr;static const struct cmd *select_station_cmd (int argc,char **argv) {
@@ -662,6 +663,8 @@ static const struct cmd *select_station_cmd(int argc, char **argv)return station_set_vlan;if (strcmp (argv[1 ],"mesh_power_mode" ) ==0 )return station_set_mesh_power_mode; +if (strcmp (argv[1 ],"txpwr" ) ==0 ) +return station_set_txpwr;return NULL ; }
@@ -813,6 +816,74 @@ COMMAND_ALIAS(station, set, "<MAC address> mesh_power_mode ""Set link-specific mesh power mode for this station" , select_station_cmd, station_set_mesh_power_mode); +static int handle_station_set_txpwr (struct nl80211_state *state, +struct nl_msg *msg, +int argc,char **argv, +enum id_input id) +{ +enum nl80211_tx_power_setting type; +unsigned char mac_addr[ETH_ALEN ]; +int sta_txpwr =0 ; +char *err =NULL ; + +if (argc !=3 && argc !=4 ) +return 1 ; + +if (mac_addr_a2n (mac_addr, argv[0 ])) { +fprintf (stderr,"invalid mac address\n" ); +return 2 ; + } + +NLA_PUT (msg,NL80211_ATTR_MAC ,ETH_ALEN , mac_addr); + argc--; + argv++; + +if (strcmp ("txpwr" , argv[0 ]) !=0 ) +return 1 ; + argc--; + argv++; + +if (!strcmp (argv[0 ],"auto" )) + type =NL80211_TX_POWER_AUTOMATIC ; +else if (!strcmp (argv[0 ],"limit" )) + type =NL80211_TX_POWER_LIMITED ; +else { +printf ("Invalid parameter: %s\n" , argv[0 ]); +return 2 ; + } + +NLA_PUT_U8 (msg,NL80211_ATTR_STA_TX_POWER_SETTING , type); + +if (type !=NL80211_TX_POWER_AUTOMATIC ) { +if (argc !=2 ) { +printf ("Missing TX power level argument.\n" ); +return 2 ; + } + + argc--; + argv++; + + sta_txpwr =strtoul (argv[0 ], &err,0 ); + +if (sta_txpwr) +NLA_PUT_U16 (msg,NL80211_ATTR_STA_TX_POWER , sta_txpwr); + } + + argc--; + argv++; + +if (argc) +return 1 ; + +return 0 ; + nla_put_failure: +return -ENOBUFS ; +} +COMMAND_ALIAS (station, set,"<MAC address> txpwr <auto|limit> [<tx power dBm>]" , +NL80211_CMD_SET_STATION ,0 ,CIB_NETDEV , handle_station_set_txpwr, +"Set Tx power for this station." , + select_station_cmd, station_set_txpwr); + static int handle_station_dump(struct nl80211_state *state, struct nl_msg *msg, int argc, char **argv,
Signature · 7 lines
2.7.4 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k