Skip to contentSkip to conversation

mx6sabre: Add DM and SPL FIT support

PATCH Superseded Abel Vesa 2 participants 28 messages Jan 30, 2019 – Jan 31, 2019

Subsystems (7)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Abel Vesa

author
#0 lore raw

v3 cover mx6sabre: Add DM and SPL FIT support

The second version is here:
https://lists.denx.de/pipermail/u-boot/2019-January/356557.html

Changes since v2:
* Removed the unecessary SYS_MALLOC_F_LEN from both defocnfig
* Fixed the copyright for all the *u-boot.dtsi files

Abel Vesa (22):
usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
usb: ehci-mx6: Make regulator DM_REGULATOR dependent
configs: imx6sabreauto: Add DM_MMC support
configs: imx6sabreauto: Add DM_USB support
mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
board: mx6sabresd: Add board_fit_config_name_match to support FIT in
SPL
board: mx6sabreauto: Add board_fit_config_name_match to support FIT in
SPL
arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
arm: imx: Add FIT SPL its
configs: mx6sabreauto: Add SPL FIT and DM support
configs: mx6sabresd: Add SPL FIT and DM support
mx6sabreauto: Add DM_GPIO support
mx6sabresd: Add DM_GPIO support
configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs
configs: mx6sabresd: Add DM_SPI_FLASH necessary configs
board: mx6sabreauto: Remove the non-DM code
board: mx6sabresd: Remove non-DM code
board: mx6sabresd: Remove the enet reset gpio handling
configs: mx6sabresd: Reduce size for SPL by disabling SPL_DOS and
SPL_EFI
board: mx6sabreauto: Update README with the SPL DM FIT info
board: mx6sabresd: Update README with the SPL DM FIT info

 arch/arm/dts/Makefile                       |   8 +-
 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi   |   6 +
 arch/arm/dts/imx6dl-sabreauto.dts           |  13 +
 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi     |   6 +
 arch/arm/dts/imx6dl-sabresd.dts             |  18 +
 arch/arm/dts/imx6dl.dtsi                    | 306 ++++++++++-
 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi    |   6 +
 arch/arm/dts/imx6q-sabreauto.dts            |  18 +
 arch/arm/dts/imx6q-sabresd-u-boot.dtsi      |   6 +
 arch/arm/dts/imx6q-sabresd.dts              |  23 +
 arch/arm/dts/imx6q.dtsi                     | 310 +++++++++--
 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi  |  21 +
 arch/arm/dts/imx6qdl-sabreauto.dtsi         | 810 ++++++++++++++++++++++++++++
 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi    |  14 +
 arch/arm/dts/imx6qdl-sabresd.dtsi           | 741 +++++++++++++++++++++++++
 arch/arm/dts/imx6qdl-u-boot.dtsi            |   4 +-
 arch/arm/dts/imx6qdl.dtsi                   | 455 +++++++++-------
 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi   |   6 +
 arch/arm/dts/imx6qp-sabreauto.dts           |  55 ++
 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi     |   6 +
 arch/arm/dts/imx6qp-sabresd.dts             |  55 ++
 arch/arm/dts/imx6qp.dtsi                    | 115 ++++
 arch/arm/include/asm/arch-am33xx/spl.h      |   2 +-
 arch/arm/mach-imx/mx6/fit_spl.its           |  41 ++
 arch/arm/mach-omap2/boot-common.c           |   2 +-
 board/freescale/mx6sabreauto/README         |   6 +-
 board/freescale/mx6sabreauto/mx6sabreauto.c |  91 +---
 board/freescale/mx6sabresd/README           |   9 +-
 board/freescale/mx6sabresd/mx6sabresd.c     |  78 +--
 common/Makefile                             |   5 +-
 common/spl/Kconfig                          |   4 +-
 common/spl/Makefile                         |   2 +-
 common/spl/spl_usb.c                        |   4 -
 configs/am43xx_evm_usbhost_boot_defconfig   |   2 +-
 configs/am43xx_hs_evm_defconfig             |   2 +-
 configs/mx6sabreauto_defconfig              |  21 +-
 configs/mx6sabresd_defconfig                |  26 +-
 drivers/mmc/fsl_esdhc.c                     |   8 +-
 drivers/usb/host/ehci-mx6.c                 |   7 +-
 39 files changed, 2900 insertions(+), 412 deletions(-)
 create mode 100644 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-sabresd.dts
 create mode 100644 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6q-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabresd.dts
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabresd.dts
 create mode 100644 arch/arm/dts/imx6qp.dtsi
 create mode 100644 arch/arm/mach-imx/mx6/fit_spl.its
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH v3 1/22 usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE

Since there is the SPL_USB_HOST_SUPPORT for enabling USB support in SPL, makes more sense to rename the SPL_USB_SUPPORT as SPL_USB_STORAGE. Everything that is not part of the usb storage support in SPL is now build under SPL_USB_HOST_SUPPORT.

---
 arch/arm/include/asm/arch-am33xx/spl.h    | 2 +-
 arch/arm/mach-omap2/boot-common.c         | 2 +-
 common/Makefile                           | 5 +++--
 common/spl/Kconfig                        | 4 ++--
 common/spl/Makefile                       | 2 +-
 common/spl/spl_usb.c                      | 4 ----
 configs/am43xx_evm_usbhost_boot_defconfig | 2 +-
 configs/am43xx_hs_evm_defconfig           | 2 +-
 8 files changed, 10 insertions(+), 13 deletions(-)
arch/arm/include/asm/arch-am33xx/spl.h +1 -1
index 0bf8c17..f3910c2 100644
@@ -62,7 +62,7 @@
 #define BOOT_DEVICE_CPGMAC	0x47
 
 #define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
-#ifdef CONFIG_SPL_USB_SUPPORT
+#ifdef CONFIG_SPL_USB_STORAGE
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_USB
 #else
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2
arch/arm/mach-omap2/boot-common.c +1 -1
index 2db1922..c8b8ac6 100644
@@ -93,7 +93,7 @@ void save_omap_boot_params(void)
 			sys_boot_device = 1;
 			break;
 #endif
-#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_SUPPORT)
+#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_STORAGE)
 		case BOOT_DEVICE_USB:
 			sys_boot_device = 1;
 			break;
common/Makefile +3 -2
index ad390d0..8c92feb 100644
@@ -75,8 +75,9 @@ obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
 
 ifdef CONFIG_SPL_USB_HOST_SUPPORT
-obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
-obj-$(CONFIG_USB_STORAGE) += usb_storage.o
+obj-y += usb.o
+obj-y += usb_hub.o
+obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o
 else
 obj-$(CONFIG_USB_MUSB_HOST) += usb.o
 endif
common/spl/Kconfig +2 -2
index 54b0dc3..8b0627e 100644
@@ -766,9 +766,9 @@ config SPL_USB_HOST_SUPPORT
 	  device can be attached. This option enables the drivers in
 	  drivers/usb/host as part of an SPL build.
 
-config SPL_USB_SUPPORT
+config SPL_USB_STORAGE
 	bool "Support loading from USB"
-	depends on SPL_USB_HOST_SUPPORT
+	depends on SPL_USB_HOST_SUPPORT && !(BLK && !DM_USB)
 	help
 	  Enable support for USB devices in SPL. This allows use of USB
 	  devices such as hard drives and flash drivers for loading U-Boot.
common/spl/Makefile +1 -1
index 6f8d759..a3980ce 100644
@@ -22,7 +22,7 @@ obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o
 obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o
 obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o
 obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o
-obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o
+obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o
 obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o
 obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o
 obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o
common/spl/spl_usb.c +0 -4
index c8d8231..e29d579 100644
@@ -15,9 +15,7 @@
 #include <usb.h>
 #include <fat.h>
 
-#ifdef CONFIG_USB_STORAGE
 static int usb_stor_curr_dev = -1; /* current device */
-#endif
 
 static int spl_usb_load_image(struct spl_image_info *spl_image,
 			      struct spl_boot_device *bootdev)
@@ -34,13 +32,11 @@ static int spl_usb_load_image(struct spl_image_info *spl_image,
 		return err;
 	}
 
-#ifdef CONFIG_USB_STORAGE
 	/* try to recognize storage devices immediately */
 	usb_stor_curr_dev = usb_stor_scan(1);
 	stor_dev = blk_get_devnum_by_type(IF_TYPE_USB, usb_stor_curr_dev);
 	if (!stor_dev)
 		return -ENODEV;
-#endif
 
 	debug("boot mode - FAT\n");
 
configs/am43xx_evm_usbhost_boot_defconfig +1 -1
index 5131f19..5bd919b 100644
@@ -14,7 +14,7 @@ CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_USB_HOST_SUPPORT=y
-CONFIG_SPL_USB_SUPPORT=y
+CONFIG_SPL_USB_STORAGE=y
 CONFIG_CMD_SPL=y
 CONFIG_CMD_SPL_NAND_OFS=0x00100000
 CONFIG_CMD_SPL_WRITE_SIZE=0x40000
configs/am43xx_hs_evm_defconfig +1 -1
index 99e4ccb..c01fda9 100644
@@ -24,7 +24,7 @@ CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_NET_SUPPORT=y
 CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
 CONFIG_SPL_USB_HOST_SUPPORT=y
-CONFIG_SPL_USB_SUPPORT=y
+CONFIG_SPL_USB_STORAGE=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_ETHER=y
 # CONFIG_CMD_FLASH is not set
Signature · 1 line
2.7.4
author
#2 lore raw

PATCH v3 2/22 usb: ehci-mx6: Make regulator DM_REGULATOR dependent

In reply to Abel Vesa

Do the regulator related work only if the build has the DM_REGULATOR.

---
 drivers/usb/host/ehci-mx6.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/usb/host/ehci-mx6.c +6 -1
index 1acf08d..9483947 100644
@@ -404,6 +404,7 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev)
 	if (ret)
 		return ret;
 
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	if (priv->vbus_supply) {
 		ret = regulator_set_enable(priv->vbus_supply,
 					   (type == USB_INIT_DEVICE) ?
@@ -413,6 +414,7 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev)
 			return ret;
 		}
 	}
+#endif
 
 	if (type == USB_INIT_DEVICE)
 		return 0;
@@ -514,15 +516,17 @@ static int ehci_usb_probe(struct udevice *dev)
 	priv->portnr = dev->seq;
 	priv->init_type = type;
 
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	ret = device_get_supply_regulator(dev, "vbus-supply",
 					  &priv->vbus_supply);
 	if (ret)
 		debug("%s: No vbus supply\n", dev->name);
-
+#endif
 	ret = ehci_mx6_common_init(ehci, priv->portnr);
 	if (ret)
 		return ret;
 
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	if (priv->vbus_supply) {
 		ret = regulator_set_enable(priv->vbus_supply,
 					   (type == USB_INIT_DEVICE) ?
@@ -532,6 +536,7 @@ static int ehci_usb_probe(struct udevice *dev)
 			return ret;
 		}
 	}
+#endif
 
 	if (priv->init_type == USB_INIT_HOST) {
 		setbits_le32(&ehci->usbmode, CM_HOST);
Signature · 1 line
2.7.4
author
#3 lore raw

PATCH v3 3/22 configs: imx6sabreauto: Add DM_MMC support

In reply to Abel Vesa

Add DM_MMC config to imx6sabreauto defconfig.

---
 configs/mx6sabreauto_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/mx6sabreauto_defconfig +1 -0
index 40386c2..a3d63a2 100644
@@ -44,6 +44,7 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_SF=y
+CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_NAND=y
 CONFIG_NAND_MXS=y
Signature · 1 line
2.7.4
author
#4 lore raw

PATCH v3 4/22 configs: imx6sabreauto: Add DM_USB support

In reply to Abel Vesa

Add the DM support for USB. For that, DM_REGULATOR is needed.

---
 configs/mx6sabreauto_defconfig | 2 ++
 1 file changed, 2 insertions(+)
configs/mx6sabreauto_defconfig +2 -0
index a3d63a2..4bdcbb1 100644
@@ -52,9 +52,11 @@ CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
+CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="FSL"
Signature · 1 line
2.7.4
author
#5 lore raw

PATCH v3 5/22 mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds

In reply to Abel Vesa

Since the fsl_esdhc will also be used by SPL, make the preprocessor switches more generic to allow any kind of build.

---
 drivers/mmc/fsl_esdhc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/mmc/fsl_esdhc.c +4 -4
index b8171ba..47f2a8f 100644
@@ -804,7 +804,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
 	case MMC_SIGNAL_VOLTAGE_330:
 		if (priv->vs18_enable)
 			return -EIO;
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 		if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
 			ret = regulator_set_value(priv->vqmmc_dev, 3300000);
 			if (ret) {
@@ -823,7 +823,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_180:
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 		if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
 			ret = regulator_set_value(priv->vqmmc_dev, 1800000);
 			if (ret) {
@@ -1442,7 +1442,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 	int node = dev_of_offset(dev);
 	struct esdhc_soc_data *data =
 		(struct esdhc_soc_data *)dev_get_driver_data(dev);
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	struct udevice *vqmmc_dev;
 #endif
 	fdt_addr_t addr;
@@ -1500,7 +1500,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 
 	priv->vs18_enable = 0;
 
-#ifdef CONFIG_DM_REGULATOR
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
 	/*
 	 * If emmc I/O has a fixed voltage at 1.8V, this must be provided,
 	 * otherwise, emmc will work abnormally.
Signature · 1 line
2.7.4
author
#6 lore raw

PATCH v3 6/22 board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL

In reply to Abel Vesa

This matches one of the following three boards (or fails):
- imx6q-sabresd
- imx6qp-sabresd
- imx6dl-sabresd

---
 board/freescale/mx6sabresd/mx6sabresd.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
board/freescale/mx6sabresd/mx6sabresd.c +18 -0
index 0183ede..4688095 100644
@@ -1062,3 +1062,21 @@ void board_init_f(ulong dummy)
 	board_init_r(NULL, 0);
 }
 #endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+	if (is_mx6dq()) {
+		if (!strcmp(name, "imx6q-sabresd"))
+			return 0;
+	} else if (is_mx6dqp()) {
+		if (!strcmp(name, "imx6qp-sabresd"))
+			return 0;
+	} else if (is_mx6dl()) {
+		if (!strcmp(name, "imx6dl-sabresd"))
+			return 0;
+	}
+
+	return -1;
+}
+#endif
Signature · 1 line
2.7.4
author
#7 lore raw

PATCH v3 7/22 board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL

In reply to Abel Vesa

This matches one of the following three boards (or fails):
- imx6q-sabreauto
- imx6qp-sabreauto
- imx6dl-sabreauto

---
 board/freescale/mx6sabreauto/mx6sabreauto.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
board/freescale/mx6sabreauto/mx6sabreauto.c +18 -0
index c1bef85..c8f1263 100644
@@ -1097,3 +1097,21 @@ void board_init_f(ulong dummy)
 	board_init_r(NULL, 0);
 }
 #endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+	if (is_mx6dq()) {
+		if (!strcmp(name, "imx6q-sabreauto"))
+			return 0;
+	} else if (is_mx6dqp()) {
+		if (!strcmp(name, "imx6qp-sabreauto"))
+			return 0;
+	} else if (is_mx6dl()) {
+		if (!strcmp(name, "imx6dl-sabreauto"))
+			return 0;
+	}
+
+	return -1;
+}
+#endif
Signature · 1 line
2.7.4
author
#8 lore raw

PATCH v3 8/22 arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files

In reply to Abel Vesa

This allows us to keep the basic dts[i] files up-to-date with the ones in kernel, but at the same time allowing the u-boot to add its own properties to the existing nodes.

---
 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi  |  6 ++++++
 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi    |  6 ++++++
 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi   |  6 ++++++
 arch/arm/dts/imx6q-sabresd-u-boot.dtsi     |  6 ++++++
 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi | 21 +++++++++++++++++++++
 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi   | 14 ++++++++++++++
 arch/arm/dts/imx6qdl-u-boot.dtsi           |  4 ++--
 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi  |  6 ++++++
 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi    |  6 ++++++
 9 files changed, 73 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi
arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000..d75fcc1
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
arch/arm/dts/imx6dl-sabresd-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000..e4d7d28
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
arch/arm/dts/imx6q-sabreauto-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000..d75fcc1
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
arch/arm/dts/imx6q-sabresd-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000..e4d7d28
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi new file +21 -0
new file mode 100644
index 0000000..ea90f40
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+	};
+};
+
+&usdhc3 {
+	no-1-8-v;
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi new file +14 -0
new file mode 100644
index 0000000..45f02b1
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
arch/arm/dts/imx6qdl-u-boot.dtsi +2 -2
index dffc21b..45ae2fa 100644
@@ -7,11 +7,11 @@
 	soc {
 		u-boot,dm-spl;
 
-		aips-bus at 02000000 {
+		aips-bus at 2000000 {
 			u-boot,dm-spl;
 		};
 
-		aips-bus at 02100000 {
+		aips-bus at 2100000 {
 			u-boot,dm-spl;
 		};
 	};
arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000..d75fcc1
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-sabreauto-u-boot.dtsi"
arch/arm/dts/imx6qp-sabresd-u-boot.dtsi new file +6 -0
new file mode 100644
index 0000000..e4d7d28
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 NXP
+ */
+
+#include "imx6qdl-sabresd-u-boot.dtsi"
Signature · 1 line
2.7.4
author
#9 lore raw

PATCH v3 9/22 arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]

In reply to Abel Vesa

Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] to the ones from kernel v4.20 (commit 8fe28cb58bcb2).

---
 arch/arm/dts/Makefile               |   8 +-
 arch/arm/dts/imx6dl-sabreauto.dts   |  13 +
 arch/arm/dts/imx6dl-sabresd.dts     |  18 +
 arch/arm/dts/imx6dl.dtsi            | 306 ++++++++++++--
 arch/arm/dts/imx6q-sabreauto.dts    |  18 +
 arch/arm/dts/imx6q-sabresd.dts      |  23 +
 arch/arm/dts/imx6q.dtsi             | 310 ++++++++++++--
 arch/arm/dts/imx6qdl-sabreauto.dtsi | 810 ++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6qdl-sabresd.dtsi   | 741 +++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6qdl.dtsi           | 455 +++++++++++---------
 arch/arm/dts/imx6qp-sabreauto.dts   |  55 +++
 arch/arm/dts/imx6qp-sabresd.dts     |  55 +++
 arch/arm/dts/imx6qp.dtsi            | 115 +++++
 13 files changed, 2669 insertions(+), 258 deletions(-)
 create mode 100644 arch/arm/dts/imx6dl-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6dl-sabresd.dts
 create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6q-sabresd.dts
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6qp-sabresd.dts
 create mode 100644 arch/arm/dts/imx6qp.dtsi
arch/arm/dts/Makefile +7 -1
index 5c3225b..c18da3d 100644
@@ -443,7 +443,13 @@ dtb-$(CONFIG_MX6QDL) += \
 	imx6q-icore.dtb \
 	imx6q-icore-mipi.dtb \
 	imx6q-icore-rqs.dtb \
-	imx6q-logicpd.dtb
+	imx6q-logicpd.dtb \
+	imx6q-sabreauto.dtb \
+	imx6q-sabresd.dtb \
+	imx6dl-sabreauto.dtb \
+	imx6dl-sabresd.dtb \
+	imx6qp-sabreauto.dtb \
+	imx6qp-sabresd.dtb
 
 dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
 
arch/arm/dts/imx6dl-sabreauto.dts new file +13 -0
new file mode 100644
index 0000000..660d52a
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
+	compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
+};
arch/arm/dts/imx6dl-sabresd.dts new file +18 -0
new file mode 100644
index 0000000..cd6bbf2
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
+	compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
arch/arm/dts/imx6dl.dtsi +282 -24

365 lines not on this page · raw message

arch/arm/dts/imx6q-sabreauto.dts new file +18 -0
new file mode 100644
index 0000000..6e981a3
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
arch/arm/dts/imx6q-sabresd.dts new file +23 -0
new file mode 100644
index 0000000..eec9446
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Smart Device Board";
+	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
arch/arm/dts/imx6q.dtsi +276 -34

450 lines not on this page · raw message

arch/arm/dts/imx6qdl-sabreauto.dtsi new file +810 -0

810 lines not on this page · raw message

arch/arm/dts/imx6qdl-sabresd.dtsi new file +741 -0

741 lines not on this page · raw message

arch/arm/dts/imx6qdl.dtsi +256 -199

548 lines not on this page · raw message

arch/arm/dts/imx6qp-sabreauto.dts new file +55 -0

55 lines not on this page · raw message

arch/arm/dts/imx6qp-sabresd.dts new file +55 -0

55 lines not on this page · raw message

arch/arm/dts/imx6qp.dtsi new file +115 -0

115 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.7.4

Part of the diff is not shown here. View the raw message.

author
#10 lore raw

PATCH v3 10/22 arm: imx: Add FIT SPL its

In reply to Abel Vesa

Add simple its in order to allow SPL to boot u-boot proper via FIT table.

---
 arch/arm/mach-imx/mx6/fit_spl.its | 41 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 arch/arm/mach-imx/mx6/fit_spl.its
arch/arm/mach-imx/mx6/fit_spl.its new file +41 -0
new file mode 100644
index 0000000..bf3ffee
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2018 NXP
+ *
+ * Simple U-boot fit source file containing U-Boot (with dtb appended)
+ */
+
+/dts-v1/;
+
+/ {
+	description = "Image for u-boot proper (with dtb appended)";
+	#address-cells = <1>;
+
+	images {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		uboot at 1 {
+			reg = <0>;
+			description = "U-Boot";
+			data = /incbin/("../../../../u-boot-fit-dtb.bin");
+			type = "standalone";
+			os = "U-Boot";
+			compression = "none";
+			arch = "arm";
+			load = <0x17800000>;
+		};
+	};
+
+	configurations {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		default = "conf at 1";
+
+		conf at 1 {
+			reg = <0>;
+			description = "i.MX armv7";
+			loadables = "uboot at 1";
+		};
+	};
+};
Signature · 1 line
2.7.4
author
#11 lore raw

PATCH v3 11/22 configs: mx6sabreauto: Add SPL FIT and DM support

In reply to Abel Vesa

Enable all the necessary configs for SPL DM and FIT support for mx6sabreauto.

---
 configs/mx6sabreauto_defconfig | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
configs/mx6sabreauto_defconfig +14 -1
index 4bdcbb1..6a4d3a4 100644
@@ -11,12 +11,19 @@ CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_NXP_BOARD_REVISION=y
 CONFIG_NR_DRAM_BANKS=1
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT=y
+CONFIG_SPL_FIT_PRINT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_SOURCE="arch/arm/mach-imx/mx6/fit_spl.its"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
@@ -40,8 +47,15 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabreauto"
+CONFIG_OF_LIST="imx6dl-sabreauto imx6q-sabreauto imx6qp-sabreauto"
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_SF=y
 CONFIG_DM_MMC=y
@@ -68,4 +82,3 @@ CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_VIDEO=y
 # CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
Signature · 1 line
2.7.4
author
#12 lore raw

PATCH v3 12/22 configs: mx6sabresd: Add SPL FIT and DM support

In reply to Abel Vesa

Enable all the necessary configs for SPL DM and FIT support for mx6sabresd.

---
 configs/mx6sabresd_defconfig | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)
configs/mx6sabresd_defconfig +19 -2
index 3babfd5..d5a4365 100644
@@ -10,12 +10,19 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT=y
+CONFIG_SPL_FIT_PRINT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_SOURCE="arch/arm/mach-imx/mx6/fit_spl.its"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
@@ -47,23 +54,34 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_EFI_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd"
+CONFIG_OF_LIST="imx6q-sabresd imx6qp-sabresd imx6dl-sabresd"
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_OF_LIST="imx6dl-sabresd imx6q-sabresd imx6qp-sabresd"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SPL_DM=y
 CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_FASTBOOT_BUF_SIZE=0x10000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=2
+CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
-CONFIG_USB_STORAGE=y
+CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
@@ -73,4 +91,3 @@ CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_VIDEO=y
 # CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
Signature · 1 line
2.7.4
author
#13 lore raw

PATCH v3 13/22 mx6sabreauto: Add DM_GPIO support

In reply to Abel Vesa

Add the DM_GPIO related config for mx6sabreauto.
Also add the gpio request calls.

---
 board/freescale/mx6sabreauto/mx6sabreauto.c | 3 +++
 configs/mx6sabreauto_defconfig              | 1 +
 2 files changed, 4 insertions(+)
board/freescale/mx6sabreauto/mx6sabreauto.c +3 -0
index c8f1263..c7e3e67 100644
@@ -501,6 +501,7 @@ iomux_v3_cfg_t const backlight_pads[] = {
 
 static void setup_iomux_backlight(void)
 {
+	gpio_request(IMX_GPIO_NR(2, 9), "backlight");
 	gpio_direction_output(IMX_GPIO_NR(2, 9), 1);
 	SETUP_IOMUX_PADS(backlight_pads);
 }
@@ -594,6 +595,7 @@ int board_init(void)
 	else
 		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
 	/* I2C 3 Steer */
+	gpio_request(IMX_GPIO_NR(5, 4), "steer logic");
 	gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
 	SETUP_IOMUX_PADS(i2c3_pads);
 #ifndef CONFIG_SYS_FLASH_CFI
@@ -602,6 +604,7 @@ int board_init(void)
 	else
 		setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info2);
 #endif
+	gpio_request(IMX_GPIO_NR(1, 15), "expander en");
 	gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
 	SETUP_IOMUX_PADS(port_exp);
 
configs/mx6sabreauto_defconfig +1 -0
index 6a4d3a4..31e8153 100644
@@ -58,6 +58,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_SF=y
+CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_NAND=y
Signature · 1 line
2.7.4
author
#14 lore raw

PATCH v3 14/22 mx6sabresd: Add DM_GPIO support

In reply to Abel Vesa

Add the DM_GPIO related config for mx6sabresd.
Also add the gpio request calls.

---
 board/freescale/mx6sabresd/mx6sabresd.c | 5 +++++
 configs/mx6sabresd_defconfig            | 1 +
 2 files changed, 6 insertions(+)
board/freescale/mx6sabresd/mx6sabresd.c +5 -0
index 4688095..99002bd 100644
@@ -96,6 +96,7 @@ static void setup_iomux_enet(void)
 	SETUP_IOMUX_PADS(enet_pads);
 
 	/* Reset AR8031 PHY */
+	gpio_request(IMX_GPIO_NR(1, 25), "ENET PHY Reset");
 	gpio_direction_output(IMX_GPIO_NR(1, 25) , 0);
 	mdelay(10);
 	gpio_set_value(IMX_GPIO_NR(1, 25), 1);
@@ -189,6 +190,7 @@ static iomux_v3_cfg_t const bl_pads[] = {
 static void enable_backlight(void)
 {
 	SETUP_IOMUX_PADS(bl_pads);
+	gpio_request(DISP0_PWR_EN, "Display Power Enable");
 	gpio_direction_output(DISP0_PWR_EN, 1);
 }
 
@@ -307,11 +309,13 @@ int board_mmc_init(bd_t *bis)
 		switch (i) {
 		case 0:
 			SETUP_IOMUX_PADS(usdhc2_pads);
+			gpio_request(USDHC2_CD_GPIO, "USDHC2 CD");
 			gpio_direction_input(USDHC2_CD_GPIO);
 			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 			break;
 		case 1:
 			SETUP_IOMUX_PADS(usdhc3_pads);
+			gpio_request(USDHC3_CD_GPIO, "USDHC3 CD");
 			gpio_direction_input(USDHC3_CD_GPIO);
 			usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 			break;
@@ -729,6 +733,7 @@ int checkboard(void)
 #ifdef CONFIG_SPL_OS_BOOT
 int spl_start_uboot(void)
 {
+	gpio_request(KEY_VOL_UP, "KEY Volume UP");
 	gpio_direction_input(KEY_VOL_UP);
 
 	/* Only enter in Falcon mode if KEY_VOL_UP is pressed */
configs/mx6sabresd_defconfig +1 -0
index d5a4365..1f4c5c5 100644
@@ -69,6 +69,7 @@ CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_FASTBOOT_BUF_SIZE=0x10000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=2
+CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
Signature · 1 line
2.7.4
author
#15 lore raw

PATCH v3 15/22 configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs

In reply to Abel Vesa

Enable all neceassary configs to support DM_SPI_FLASH on mx6sabreauto.

---
 configs/mx6sabreauto_defconfig | 2 ++
 1 file changed, 2 insertions(+)
configs/mx6sabreauto_defconfig +2 -0
index 31e8153..34fb9d04 100644
@@ -63,12 +63,14 @@ CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_NAND=y
 CONFIG_NAND_MXS=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
 CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
Signature · 1 line
2.7.4
author
#16 lore raw

PATCH v3 16/22 configs: mx6sabresd: Add DM_SPI_FLASH necessary configs

In reply to Abel Vesa

Enable all neceassary configs to support DM_SPI_FLASH on mx6sabresd.

---
 configs/mx6sabresd_defconfig | 2 ++
 1 file changed, 2 insertions(+)
configs/mx6sabresd_defconfig +2 -0
index 1f4c5c5..b26e764 100644
@@ -72,6 +72,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=2
 CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
@@ -79,6 +80,7 @@ CONFIG_MII=y
 CONFIG_PCI=y
 CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
Signature · 1 line
2.7.4
author
#17 lore raw

PATCH v3 17/22 board: mx6sabreauto: Remove the non-DM code

In reply to Abel Vesa

Since the mx6sabreauto has DM support, remove the unused non-DM code from mx6sabreauto board file.

---
 board/freescale/mx6sabreauto/mx6sabreauto.c | 70 -----------------------------
 1 file changed, 70 deletions(-)
board/freescale/mx6sabreauto/mx6sabreauto.c +0 -70
index c7e3e67..dd72de9 100644
@@ -159,44 +159,6 @@ static iomux_v3_cfg_t const port_exp[] = {
 	IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15	| MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
-/*Define for building port exp gpio, pin starts from 0*/
-#define PORTEXP_IO_NR(chip, pin) \
-	((chip << 5) + pin)
-
-/*Get the chip addr from a ioexp gpio*/
-#define PORTEXP_IO_TO_CHIP(gpio_nr) \
-	(gpio_nr >> 5)
-
-/*Get the pin number from a ioexp gpio*/
-#define PORTEXP_IO_TO_PIN(gpio_nr) \
-	(gpio_nr & 0x1f)
-
-static int port_exp_direction_output(unsigned gpio, int value)
-{
-	int ret;
-
-	i2c_set_bus_num(2);
-	ret = i2c_probe(PORTEXP_IO_TO_CHIP(gpio));
-	if (ret)
-		return ret;
-
-	ret = pca953x_set_dir(PORTEXP_IO_TO_CHIP(gpio),
-		(1 << PORTEXP_IO_TO_PIN(gpio)),
-		(PCA953X_DIR_OUT << PORTEXP_IO_TO_PIN(gpio)));
-
-	if (ret)
-		return ret;
-
-	ret = pca953x_set_val(PORTEXP_IO_TO_CHIP(gpio),
-		(1 << PORTEXP_IO_TO_PIN(gpio)),
-		(value << PORTEXP_IO_TO_PIN(gpio)));
-
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
 #ifdef CONFIG_MTD_NOR_FLASH
 static iomux_v3_cfg_t const eimnor_pads[] = {
 	IOMUX_PADS(PAD_EIM_D16__EIM_DATA16	| MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
@@ -681,19 +643,10 @@ int checkboard(void)
 }
 
 #ifdef CONFIG_USB_EHCI_MX6
-#define USB_HOST1_PWR     PORTEXP_IO_NR(0x32, 7)
-#define USB_OTG_PWR       PORTEXP_IO_NR(0x34, 1)
-
-iomux_v3_cfg_t const usb_otg_pads[] = {
-	IOMUX_PADS(PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
 int board_ehci_hcd_init(int port)
 {
 	switch (port) {
 	case 0:
-		SETUP_IOMUX_PADS(usb_otg_pads);
-
 		/*
 		  * Set daisy chain for otg_pin_id on 6q.
 		 *  For 6dl, this bit is reserved.
@@ -708,29 +661,6 @@ int board_ehci_hcd_init(int port)
 	}
 	return 0;
 }
-
-int board_ehci_power(int port, int on)
-{
-	switch (port) {
-	case 0:
-		if (on)
-			port_exp_direction_output(USB_OTG_PWR, 1);
-		else
-			port_exp_direction_output(USB_OTG_PWR, 0);
-		break;
-	case 1:
-		if (on)
-			port_exp_direction_output(USB_HOST1_PWR, 1);
-		else
-			port_exp_direction_output(USB_HOST1_PWR, 0);
-		break;
-	default:
-		printf("MXC USB port %d not yet supported\n", port);
-		return -EINVAL;
-	}
-
-	return 0;
-}
 #endif
 
 #ifdef CONFIG_SPL_BUILD
Signature · 1 line
2.7.4
author
#18 lore raw

PATCH v3 18/22 board: mx6sabresd: Remove non-DM code

In reply to Abel Vesa

Since the mx6sabreauto has DM support, remove the unused non-DM code from mx6sabresd board file.

---
 board/freescale/mx6sabresd/mx6sabresd.c | 50 ---------------------------------
 1 file changed, 50 deletions(-)
board/freescale/mx6sabresd/mx6sabresd.c +0 -50
index 99002bd..0824a05 100644
@@ -563,63 +563,13 @@ int board_eth_init(bd_t *bis)
 }
 
 #ifdef CONFIG_USB_EHCI_MX6
-#define USB_OTHERREGS_OFFSET	0x800
-#define UCTRL_PWR_POL		(1 << 9)
-
-static iomux_v3_cfg_t const usb_otg_pads[] = {
-	IOMUX_PADS(PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)),
-	IOMUX_PADS(PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usb_hc1_pads[] = {
-	IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
 static void setup_usb(void)
 {
-	SETUP_IOMUX_PADS(usb_otg_pads);
-
 	/*
 	 * set daisy chain for otg_pin_id on 6q.
 	 * for 6dl, this bit is reserved
 	 */
 	imx_iomux_set_gpr_register(1, 13, 1, 0);
-
-	SETUP_IOMUX_PADS(usb_hc1_pads);
-}
-
-int board_ehci_hcd_init(int port)
-{
-	u32 *usbnc_usb_ctrl;
-
-	if (port > 1)
-		return -EINVAL;
-
-	usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
-				 port * 4);
-
-	setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
-
-	return 0;
-}
-
-int board_ehci_power(int port, int on)
-{
-	switch (port) {
-	case 0:
-		break;
-	case 1:
-		if (on)
-			gpio_direction_output(IMX_GPIO_NR(1, 29), 1);
-		else
-			gpio_direction_output(IMX_GPIO_NR(1, 29), 0);
-		break;
-	default:
-		printf("MXC USB port %d not yet supported\n", port);
-		return -EINVAL;
-	}
-
-	return 0;
 }
 #endif
 
Signature · 1 line
2.7.4
author
#19 lore raw

PATCH v3 19/22 board: mx6sabresd: Remove the enet reset gpio handling

In reply to Abel Vesa

Rely on the phy-reset-gpios which is set in imx6qdl-sabresd dtsi and get rid of the enet reset gpio handling from the board file.

---
 board/freescale/mx6sabresd/mx6sabresd.c | 7 -------
 1 file changed, 7 deletions(-)
board/freescale/mx6sabresd/mx6sabresd.c +0 -7
index 0824a05..385a18e 100644
@@ -94,13 +94,6 @@ static iomux_v3_cfg_t const enet_pads[] = {
 static void setup_iomux_enet(void)
 {
 	SETUP_IOMUX_PADS(enet_pads);
-
-	/* Reset AR8031 PHY */
-	gpio_request(IMX_GPIO_NR(1, 25), "ENET PHY Reset");
-	gpio_direction_output(IMX_GPIO_NR(1, 25) , 0);
-	mdelay(10);
-	gpio_set_value(IMX_GPIO_NR(1, 25), 1);
-	udelay(100);
 }
 
 static iomux_v3_cfg_t const usdhc2_pads[] = {
Signature · 1 line
2.7.4
author
#20 lore raw

PATCH v3 20/22 configs: mx6sabresd: Reduce size for SPL by disabling SPL_DOS and SPL_EFI

In reply to Abel Vesa

With DM and FIT enabled in SPL, there is an sram overflow. By disabling CONFIG_SPL_DOS_PARTITION and CONFIG_SPL_EFI_PARTITION, we get to keep the 'one binary to fit all' for imx6[q|qp|dl] on sabresd since the final SPL image is now under 64KB.

---
 configs/mx6sabresd_defconfig | 2 ++
 1 file changed, 2 insertions(+)
configs/mx6sabresd_defconfig +2 -0
index b26e764..84840fe 100644
@@ -54,6 +54,8 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_EFI_PARTITION=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd"
Signature · 1 line
2.7.4
author
#21 lore raw

PATCH v3 21/22 board: mx6sabreauto: Update README with the SPL DM FIT info

In reply to Abel Vesa

There is a new step now. The need to build the u-boot.itb. And instead of flashing the .img file, now the .itb file needs to be flashed.

---
 board/freescale/mx6sabreauto/README | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
board/freescale/mx6sabreauto/README +4 -2
index e8c589b..960a7d7 100644
@@ -8,6 +8,7 @@ In order to build it:
 $ make mx6sabreauto_defconfig
 
 $ make
+$ make u-boot.itb
 
 This will generate the SPL and u-boot.img binaries.
 
@@ -17,7 +18,7 @@ $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
 
 - Flash the u-boot.img binary into the SD card:
 
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
+$ sudo dd if=u-boot.itb of=/dev/sdX bs=1K seek=69 && sync
 
 Booting via Falcon mode
 -----------------------
@@ -31,6 +32,7 @@ In order to build it:
 $ make mx6sabreauto_defconfig
 
 $ make
+$ make u-boot.itb
 
 This will generate the SPL image called SPL and the u-boot.img.
 
@@ -40,7 +42,7 @@ $ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync
 
 - Flash the u-boot.img image into the SD card:
 
-$ sudo dd if=u-boot.img of=/dev/sdb bs=1K seek=69 && sync
+$ sudo dd if=u-boot.itb of=/dev/sdb bs=1K seek=69 && sync
 
 Create a FAT16 boot partition to store uImage and the dtb file, then copy the files there:
 
Signature · 1 line
2.7.4
author
#22 lore raw

PATCH v3 22/22 board: mx6sabresd: Update README with the SPL DM FIT info

In reply to Abel Vesa

There is a new step now. The need to build the u-boot.itb. And instead of flashing the .img file, now the .itb file needs to be flashed.

---
 board/freescale/mx6sabresd/README | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
board/freescale/mx6sabresd/README +6 -3
index 4b4df06..9b7f7cd 100644
@@ -20,6 +20,7 @@ In order to build it:
 $ make mx6sabresd_defconfig
 
 $ make
+$ make u-boot.itb
 
 This will generate the SPL and u-boot.img binaries.
 
@@ -29,7 +30,7 @@ $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
 
 - Flash the u-boot.img binary into the SD card:
 
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
+$ sudo dd if=u-boot.itb of=/dev/sdX bs=1K seek=69 && sync
 
 
 2. Booting from eMMC
@@ -38,6 +39,7 @@ $ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
 $ make mx6sabresd_defconfig
 
 $ make
+$ make u-boot.itb
 
 This will generate the SPL and u-boot.img binaries.
 
@@ -54,7 +56,7 @@ Mount the eMMC in the host PC:
 - Flash SPL and u-boot.img binaries into the eMMC:
 
 $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
+$ sudo dd if=u-boot.itb of=/dev/sdX bs=1K seek=69 && sync
 
 Set SW6 to eMMC 8-bit boot: 11010110
 
@@ -64,6 +66,7 @@ Set SW6 to eMMC 8-bit boot: 11010110
 
 $ make mx6sabresd_defconfig
 $ make
+$ make u-boot.itb
 
 This will generate the SPL image called SPL and the u-boot.img.
 
@@ -73,7 +76,7 @@ $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none && sync
 
 - Flash the u-boot.img image into the SD card:
 
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none && sync
+$ sudo dd if=u-boot.itb of=/dev/sdX bs=1K seek=69 oflag=sync status=none && sync
 
 Create a partition for root file system and extract it there:
 
Signature · 1 line
2.7.4
#23 lore raw

v3 cover mx6sabre: Add DM and SPL FIT support

In reply to Abel Vesa
Quoted 6 lines · Abel Vesa

The second version is here:
https://lists.denx.de/pipermail/u-boot/2019-January/356557.html

Changes since v2:
* Removed the unecessary SYS_MALLOC_F_LEN from both defocnfig
* Fixed the copyright for all the *u-boot.dtsi files

OK, but you didn't answer why you need to specify your own its file when the TI examples show how to have mkimage generate this for you, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190130/abf2964d/attachment.sig>
author
#24 lore raw

v3 cover mx6sabre: Add DM and SPL FIT support

Quoted 5 lines · Tom Rini
Quoted 3 lines · Abel Vesa

The second version is here:
https://lists.denx.de/pipermail/u-boot/2019-January/356557.html

Quoted 7 lines
Quoted 3 lines

Changes since v2:
* Removed the unecessary SYS_MALLOC_F_LEN from both defocnfig
* Fixed the copyright for all the *u-boot.dtsi files

OK, but you didn't answer why you need to specify your own its file when the TI examples show how to have mkimage generate this for you, thanks!

I might be wrong here but TI is doing this for MLO, which AFAIU, it's for SPL. The fit_spl.its I'm adding here is actually for u-boot proper.

SPL expects descriptions in the configurations and that can't be done without its file, again, AFAIK.

Please let me know what exactly am I missing here.

Quoted 2 lines
Signature · 1 line
Tom
#25 lore raw

v3 cover mx6sabre: Add DM and SPL FIT support

Quoted 14 lines · Abel Vesa
Quoted 5 lines · Tom Rini
Quoted 3 lines · Abel Vesa

The second version is here:
https://lists.denx.de/pipermail/u-boot/2019-January/356557.html

Quoted 7 lines
Quoted 3 lines

Changes since v2:
* Removed the unecessary SYS_MALLOC_F_LEN from both defocnfig
* Fixed the copyright for all the *u-boot.dtsi files

OK, but you didn't answer why you need to specify your own its file when the TI examples show how to have mkimage generate this for you, thanks!

Quoted 7 lines

I might be wrong here but TI is doing this for MLO, which AFAIU, it's for SPL. The fit_spl.its I'm adding here is actually for u-boot proper.

SPL expects descriptions in the configurations and that can't be done without its file, again, AFAIK.

Please let me know what exactly am I missing here.

The flag to mkimage is not about SPL but rather "create a single configurations its file on the fly". This should also be fine for the its file in patch 10/22 (of v2, don't have v3 in front of me in patchwork).

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190131/be25699e/attachment.sig>
author
#26 lore raw

v3 cover mx6sabre: Add DM and SPL FIT support

Quoted 21 lines · Tom Rini
Quoted 20 lines · Abel Vesa
Quoted 5 lines · Tom Rini
Quoted 3 lines · Abel Vesa

The second version is here:
https://lists.denx.de/pipermail/u-boot/2019-January/356557.html

Quoted 7 lines
Quoted 3 lines

Changes since v2:
* Removed the unecessary SYS_MALLOC_F_LEN from both defocnfig
* Fixed the copyright for all the *u-boot.dtsi files

OK, but you didn't answer why you need to specify your own its file when the TI examples show how to have mkimage generate this for you, thanks!

I might be wrong here but TI is doing this for MLO, which AFAIU, it's for SPL. The fit_spl.its I'm adding here is actually for u-boot proper.

SPL expects descriptions in the configurations and that can't be done without its file, again, AFAIK.

Quoted 7 lines
Quoted 1 line

Please let me know what exactly am I missing here.

The flag to mkimage is not about SPL but rather "create a single configurations its file on the fly". This should also be fine for the its file in patch 10/22 (of v2, don't have v3 in front of me in patchwork).

Well, I tried something like this (manually):

$ ./tools/mkimage -f auto -C none -A ARM -T standalone -a 0x17800000 -e 0x17800000 -d u-boot-fit-dtb.bin -n "U-Boot" u-boot.itb -E

and the output was:

FIT description: Standalone Program image with one or more FDT blobs                  
Created:         Thu Jan 31 13:58:01 2019                                             
 Image 0 (standalone-1)                                                               
  Description:  U-Boot                                                                
  Created:      Thu Jan 31 13:58:01 2019                                              
  Type:         Standalone Program                                                    
  Compression:  uncompressed                                                          
  Data Size:    646400 Bytes = 631.25 KiB = 0.62 MiB                                  

Architecture: ARM
Load Address: 0x17800000
Entry Point: 0x17800000
Default Configuration: 'conf-1'
Configuration 0 (conf-1)
Description: unavailable
Kernel: unavailable

And then the SPL complains about the configuration description:

U-Boot SPL 2019.01-00374-gbe79a83 (Jan 31 2019 - 13:56:01 +0200) Trying to boot from MMC1
fit_find_config_node: Missing FDT description in DTB No matching DT out of these options:
Firmware image with one or more FDT blobs
fit_find_config_node: Missing FDT description in DTB No matching DT out of these options:
Firmware image with one or more FDT blobs
fit_find_config_node: Missing FDT description in DTB No matching DT out of these options:
Firmware image with one or more FDT blobs
mmc_load_image_raw_sector: mmc block read error
spl: no partition table found
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

But with the fit_spl.its file I added I have this and works:

FIT description: Image for u-boot proper (with dtb appended)    
Created:         Thu Jan 31 13:57:02 2019                       
 Image 0 (uboot at 1)                                              
  Description:  U-Boot                                          
  Created:      Thu Jan 31 13:57:02 2019                        
  Type:         Standalone Program                              
  Compression:  uncompressed                                    
  Data Size:    646400 Bytes = 631.25 KiB = 0.62 MiB            
  Architecture: ARM                                             
  Load Address: 0x17800000                                      
  Entry Point:  unavailable                                     
 Default Configuration: 'conf at 1'                                
 Configuration 0 (conf at 1)                                       
  Description:  i.MX armv7                                      
  Kernel:       unavailable                                     
  Loadables:    uboot at 1                                         

So the differences between this and the one generated with mkimage+flags are the loadables and the description in the configuration 0.

Can I specify those through flags ?

Quoted 2 lines
Signature · 1 line
Tom
#27 lore raw

v3 cover mx6sabre: Add DM and SPL FIT support

Quoted 89 lines · Abel Vesa
Quoted 21 lines · Tom Rini
Quoted 20 lines · Abel Vesa
Quoted 5 lines · Tom Rini
Quoted 3 lines · Abel Vesa

The second version is here:
https://lists.denx.de/pipermail/u-boot/2019-January/356557.html

Quoted 7 lines
Quoted 3 lines

Changes since v2:
* Removed the unecessary SYS_MALLOC_F_LEN from both defocnfig
* Fixed the copyright for all the *u-boot.dtsi files

OK, but you didn't answer why you need to specify your own its file when the TI examples show how to have mkimage generate this for you, thanks!

I might be wrong here but TI is doing this for MLO, which AFAIU, it's for SPL. The fit_spl.its I'm adding here is actually for u-boot proper.

SPL expects descriptions in the configurations and that can't be done without its file, again, AFAIK.

Quoted 7 lines
Quoted 1 line

Please let me know what exactly am I missing here.

The flag to mkimage is not about SPL but rather "create a single configurations its file on the fly". This should also be fine for the its file in patch 10/22 (of v2, don't have v3 in front of me in patchwork).

Well, I tried something like this (manually):

$ ./tools/mkimage -f auto -C none -A ARM -T standalone -a 0x17800000 -e 0x17800000 -d u-boot-fit-dtb.bin -n "U-Boot" u-boot.itb -E

and the output was:

FIT description: Standalone Program image with one or more FDT blobs                  
Created:         Thu Jan 31 13:58:01 2019                                             
 Image 0 (standalone-1)                                                               
  Description:  U-Boot                                                                
  Created:      Thu Jan 31 13:58:01 2019                                              
  Type:         Standalone Program                                                    
  Compression:  uncompressed                                                          
  Data Size:    646400 Bytes = 631.25 KiB = 0.62 MiB                                  

Architecture: ARM
Load Address: 0x17800000
Entry Point: 0x17800000
Default Configuration: 'conf-1'
Configuration 0 (conf-1)
Description: unavailable
Kernel: unavailable

And then the SPL complains about the configuration description:

U-Boot SPL 2019.01-00374-gbe79a83 (Jan 31 2019 - 13:56:01 +0200) Trying to boot from MMC1
fit_find_config_node: Missing FDT description in DTB No matching DT out of these options:
Firmware image with one or more FDT blobs
fit_find_config_node: Missing FDT description in DTB No matching DT out of these options:
Firmware image with one or more FDT blobs
fit_find_config_node: Missing FDT description in DTB No matching DT out of these options:
Firmware image with one or more FDT blobs
mmc_load_image_raw_sector: mmc block read error
spl: no partition table found
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

But with the fit_spl.its file I added I have this and works:

FIT description: Image for u-boot proper (with dtb appended)    
Created:         Thu Jan 31 13:57:02 2019                       
 Image 0 (uboot at 1)                                              
  Description:  U-Boot                                          
  Created:      Thu Jan 31 13:57:02 2019                        
  Type:         Standalone Program                              
  Compression:  uncompressed                                    
  Data Size:    646400 Bytes = 631.25 KiB = 0.62 MiB            
  Architecture: ARM                                             
  Load Address: 0x17800000                                      
  Entry Point:  unavailable                                     
 Default Configuration: 'conf at 1'                                
 Configuration 0 (conf at 1)                                       
  Description:  i.MX armv7                                      
  Kernel:       unavailable                                     
  Loadables:    uboot at 1                                         
Quoted 4 lines

So the differences between this and the one generated with mkimage+flags are the loadables and the description in the configuration 0.

Can I specify those through flags ?

Off the top of my head, I'm not sure what's going on, but thanks for digging at it more. I would say that this case not working is a bug, not a feature, so please figure out what's needed such that mkimage does the right thing in this case. The intention is that for a single configuration FIT we should not have to write the its file by hand. Thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190131/de5c3828/attachment.sig>