Skip to contentSkip to conversation

arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186

PATCH New Jon Hunter 1 participant 1 message Feb 13, 2019

Subsystems (2)
lore
Share & tools
lore

Jon Hunter

author maintainer
#0 lore raw

PATCH 1/1 arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186

From: Jonathan Hunter <[email protected]>

Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression that is causing accesses to the file-system on the eMMC to fail. Errors such as the following have been observed ...

mmc2: running CQE recovery
mmc2: mmc_select_hs400 failed, error -110
print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700
mmc2: cqhci: CQE failed to exit halt state

For now disable CQE support for Tegra186 until this issue is resolved.

Fixes dfd3cb6feb73 arm64: tegra: Add CQE Support for SDMMC4
---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 1 -
 1 file changed, 1 deletion(-)
arch/arm64/boot/dts/nvidia/tegra186.dtsi +0 -1
index bb2045be8814..97aeb946ed5e 100644
@@ -321,7 +321,6 @@
 		nvidia,default-trim = <0x9>;
 		nvidia,dqs-trim = <63>;
 		mmc-hs400-1_8v;
-		supports-cqe;
 		status = "disabled";
 	};
 
Signature · 1 line
1.9.1