s390x/vfio-ap: hot plug/unplug vfio-ap device
v2 cover s390x/vfio-ap: hot plug/unplug vfio-ap device
This patch series introduces hot plug/unplug of a vfio-ap device.
A vfio-ap device can be hot plugged only if:
1. The guest does not yet have a vfio-ap device (only one is allowed per guest)
2. The guest was started with the following CPU model features enabled:
* ap=on
* apft=on
To hot plug a vfio-ap device, the QEMU device_add function may be used:
(qemu) device_add vfio-ap,sysfsdev=$path-to-mdev
Where $path-to-mdev is the absolute path to the mediated matrix device to be used to configure the guest's AP device matrix.
A vfio-ap device can be hot unplugged only if:
1. The guest was started with a vfio-ap device configured for it:
-device vfio-ap,sysfsdev=$path-to-mdev
2. The guest was started with the following CPU model features enabled:
* ap=on
Tony Krowiak (2):
s390x/vfio-ap: Implement hot plug/unplug of vfio-ap device s390x/vfio-ap: document hot plug/unplug of vfio-ap device
docs/vfio-ap.txt | 58 +++++++++++++++++++++++++++++++++++++++++++++++----- hw/s390x/ap-bridge.c | 12 ++++++++++- hw/vfio/ap.c | 2 +- 3 files changed, 65 insertions(+), 7 deletions(-)
Signature · 1 line
2.7.4
PATCH v2 1/2 s390x/vfio-ap: Implement hot plug/unplug of vfio-ap device
Introduces hot plug/unplug support for the vfio-ap device. Note that only one vfio-ap device can be attached to the ap-bus, so a vfio-ap device can only be hot plugged if the '-device vfio-ap,sysfsdev=$path_to_mdev' option is not specified on the QEMU command line.
Please note that a hot plug handler is not necessary for the vfio-ap device because the AP matrix configuration for the guest is performed by the kernel device driver when the vfio-ap device is realized. The vfio-ap device represents a VFIO mediated device created in the host sysfs for use by a guest. The mdev device is configured with an AP matrix (i.e., adapters and domains) via its sysfs attribute interfaces prior to starting the guest or plugging a vfio-ap device in. When the device is realized, a file descriptor is opened on the mdev device which results in a callback to the vfio_ap kernel device driver. The device driver then configures the AP matrix in the guest's SIE state description from the AP matrix assigned via the mdev device's sysfs interfaces. The AP devices will be created for the guest when the AP bus running on the guest subsequently performs its periodic scan for AP devices.
The qdev_simple_device_unplug_cb() callback function is used for the same reaons; namely, the vfio_ap kernel device driver will perform the AP resource de-configuration for the guest when the vfio-ap device is unplugged. When the vfio-ap device is unrealized, the mdev device file descriptor is closed which results in a callback to the vfio_ap kernel device driver. The device driver then clears the AP matrix configuration in the guest's SIE state description and resets all of the affected queues. The AP devices created for the guest will be removed when the AP bus running on the guest subsequently performs its periodic scan and finds there are no longer any AP resources assigned to the guest.
--- hw/s390x/ap-bridge.c | 12 +++++++++++- hw/vfio/ap.c | 2 +- 2 files changed, 12 insertions(+), 2 deletions(-)
hw/s390x/ap-bridge.c +11 -1
@@ -39,6 +39,7 @@ static const TypeInfo ap_bus_info = {void s390_init_ap (void ) {DeviceState *dev; +BusState *bus;/* If no AP instructions then no need for AP bridge */ if (!s390_has_feat (S390_FEAT_AP )) {
@@ -52,13 +53,18 @@ void s390_init_ap(void)qdev_init_nofail (dev);/* Create bus on bridge device */ -qbus_create (TYPE_AP_BUS , dev,TYPE_AP_BUS ); + bus =qbus_create (TYPE_AP_BUS , dev,TYPE_AP_BUS ); + +/* Enable hotplugging */ +qbus_set_hotplug_handler (bus, dev, &error_abort); }static void ap_bridge_class_init (ObjectClass *oc,void *data) {DeviceClass *dc =DEVICE_CLASS (oc); +HotplugHandlerClass *hc =HOTPLUG_HANDLER_CLASS (oc); + hc->unplug = qdev_simple_device_unplug_cb;set_bit (DEVICE_CATEGORY_BRIDGE , dc->categories); }
@@ -67,6 +73,10 @@ static const TypeInfo ap_bridge_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = 0, .class_init = ap_bridge_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_HOTPLUG_HANDLER }, + { } + } };static void ap_register (void )
hw/vfio/ap.c +1 -1
@@ -169,7 +169,7 @@ static void vfio_ap_class_init(ObjectClass *klass, void *data)set_bit (DEVICE_CATEGORY_MISC , dc->categories); dc->realize = vfio_ap_realize; dc->unrealize = vfio_ap_unrealize; - dc->hotpluggable = false; + dc->hotpluggable = true; dc->reset = vfio_ap_reset; dc->bus_type =TYPE_AP_BUS ; }
Signature · 1 line
2.7.4
PATCH v2 2/2 s390x/vfio-ap: document hot plug/unplug of vfio-ap device
In reply to Tony KrowiakLet's update the vfio-ap.txt document to include the hot plug/unplug support introduced in this patch set.
--- docs/vfio-ap.txt | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 53 insertions(+), 5 deletions(-)
docs/vfio-ap.txt +53 -5
@@ -440,8 +440,7 @@ unassign_control_domain 'unassign_domain' file. This may be done multiple times to unassign more than one control domain. -Notes: Hot plug/unplug is not currently supported for mediated AP matrix -devices, so no changes to the AP matrix will be allowed while a guest using +Notes: No changes to the AP matrix will be allowed while a guest using the mediated matrix device is running. Attempts to assign an adapter, domain or control domain will be rejected and an error (EBUSY) returned.
@@ -562,6 +561,51 @@ facilities: for guest usage, no AP devices can be made accessible to a guest started without APFT installed. +Hot plug a vfio-ap device into a running guest: +============================================== +Only one vfio-ap device can be attached to the guest's ap-bus, so a vfio-ap +device can be hot plugged if and only if the +'-device vfio-ap,sysfsdev=$path-to-mdev' option was NOT specified on the QEMU +command line when the guest was started. + +To hot plug a vfio-ap device, use the QEMU device_add command: + + (qemu) device_add vfio-ap,sysfsdev="$path-to-mdev" + + Where the '$path-to-mdev' value specifies the absolute path to a mediated + device configured with an AP matrix identifying the AP resources assigned + to the guest. + +The AP devices will be created in the /sys/bus/ap/devices directory on the +guest when the AP bus subsequently performs its periodic scan, so there may be +a short delay before the AP devices are accessible on the guest. + +The command will fail if: + +* The KVM guest was started with the '-device vfio-ap,sysfs=$path-to-mdev' + QEMU command line option. + +* The CPU model features for controlling guest access to AP facilities are not + enabled (see 'CPU model features' subsection in the previous section). + +Hot unplug a vfio-ap device from a running guest: +================================================ +A vfio-ap device can be unplugged from a running KVM guest if the +'-device vfio-ap,sysfsdev=$path-to-mdev' option was specified on the QEMU +command line when the guest was started. + +To hot unplug a vfio-ap device, use the QEMU device_del command: + + (qemu) device_del vfio-ap,sysfsdev="$path-to-mdev" + +The AP devices will be removed from the /sys/bus/ap/devices directory on the +guest when the AP bus subsequently performs its periodic scan, so there may be +a short delay before the AP devices are no longer accessible by the guest. + +The command will fail if the $path-to-mdev specified on the device_del command +does not match the value specified on the '-device vfio-ap,sysfs=$path-to-mdev' +QEMU command line used to start the guest. + Example: Configure AP Matrixes for Three Linux Guests: ===================================================== Let's now provide an example to illustrate how KVM guests may be given
@@ -819,7 +863,11 @@ Limitations assigned lest the host be given access to the private data of the AP queue device, such as a private key configured specifically for the guest. -* Dynamically modifying the AP matrix for a running guest (which would amount to - hot(un)plug of AP devices for the guest) is currently not supported +* Dynamically assigning AP resources to or unassigning AP resources from a + mediated matrix device - see 'Configuring an AP matrix for a linux guest' + section above - while a running guest is using it is currently not supported. -* Live guest migration is not supported for guests using AP devices. +* Live guest migration is not supported for guests using AP devices. If a guest + is using AP devices, the vfio-ap device configured for the guest must be + unplugged before migrating the guest (see 'Hot unplug a vfio-ap device from a + running guest' section above.
Signature · 1 line
2.7.4
On 2/18/19 12:59 PM, Tony Krowiak wrote:
PLEASE IGNORE THIS PATCH SERIES. A v3 VERSION IS FORTHCOMING. VERSION v2 has already been posted and reviewed.
Quoted 36 lines
This patch series introduces hot plug/unplug of a vfio-ap device.
A vfio-ap device can be hot plugged only if:
1. The guest does not yet have a vfio-ap device (only one is allowed per guest)
2. The guest was started with the following CPU model features enabled:
* ap=on
* apft=onTo hot plug a vfio-ap device, the QEMU
device_addfunction may be used:(qemu)
device_addvfio-ap,sysfsdev=$path-to-mdevWhere $path-to-mdev is the absolute path to the mediated matrix device to be used to configure the guest's AP device matrix.
A vfio-ap device can be hot unplugged only if:
1. The guest was started with a vfio-ap device configured for it:
-device vfio-ap,sysfsdev=$path-to-mdev
2. The guest was started with the following CPU model features enabled:
* ap=onTony Krowiak (2):
s390x/vfio-ap: Implement hot plug/unplug of vfio-ap device s390x/vfio-ap: document hot plug/unplug of vfio-ap devicedocs/vfio-ap.txt | 58 +++++++++++++++++++++++++++++++++++++++++++++++----- hw/s390x/ap-bridge.c | 12 ++++++++++- hw/vfio/ap.c | 2 +- 3 files changed, 65 insertions(+), 7 deletions(-)