arm64: tegra: Add supply for temperature sensor on P2888
Subsystems (2)
Jon Hunter
maintainerPATCH 1/1 arm64: tegra: Add supply for temperature sensor on P2888
The VCC supply property is not populated for the temperature sensor on the P2888 board and so the following warning is observed on boot ...
lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
On the P2888 board, the VCC supply for the temperature sensor is connected to the 'vdd_1v8ls' rail. Add the 'vcc-supply' property for the temperature sensor to prevent this warning message from occurring.
--- arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +1 -0
@@ -256,6 +256,7 @@ interrupt-parent = <&gpio>; interrupts = <TEGRA194_MAIN_GPIO(H, 2) IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <&vdd_1v8ls>; #thermal-sensor-cells = <1>; };
Signature · 1 line
2.7.4
Thierry Reding
AppliedQuoted 9 lines · Jon Hunter
The VCC supply property is not populated for the temperature sensor on the P2888 board and so the following warning is observed on boot ...
lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
On the P2888 board, the VCC supply for the temperature sensor is connected to the '
vdd_1v8ls' rail. Add the 'vcc-supply' property for the temperature sensor to prevent this warning message from occurring.
Quoted 6 lines
Fixes 8b457812f54b ('arm64: tegra: Add temperature sensor on P2888')Signed-off-by Jon Hunter <[email protected]>--- arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 1 + 1 file changed, 1 insertion(+)
Applied to for-5.2/arm64/dt, thanks.
Thierry
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel