selftests/ima: add kexec and kernel module tests
Subsystems (2)
Mimi Zohar
maintainerv2 cover selftests/ima: add kexec and kernel module tests
The kernel can be configured to require kexec kernel images and kernel modules are signed. An IMA policy can be specified on the boot command line or a custom IMA policy loaded requiring the kexec kernel image and kernel modules be signed. In addition, systems booted in secure boot mode with the IMA architecture specific policy enabled, require validly signed kexec kernel images and kernel modules.
There are two methods of signing kernel images and two methods of signing kernel modules. In addition, there are two syscalls for each.
kernel image: PE signature, IMA signature
kexec syscalls: kexec_load, kexec_file_load
Both the PE and IMA kernel image signature can only be verified when loaded via the kexec_file_load syscall.
kernel moodule: appended signature, IMA signature
kernel module syscalls: init_module, finit_module
The appended kernel module signature can be verified when the kernel module is loaded via either syscall. The IMA kernel module signature can only be verified when the kernel module is loaded via the finit_module syscall.
The selftests in this patch set verify that only signed kernel images and kernel modules are loaded as required, based on the kernel config, the secure boot mode, and the IMA runtime policy.
Loading a kernel image or kernel module requires root privileges. To run just the IMA selftests: sudo make TARGETS=ima kselftest
Mimi Zohar (5):
selftests/ima: cleanup the kexec selftest
selftests/ima: define a set of common functions
selftests/ima: define common logging functions
selftests/ima: kexec_file_load syscall test
selftests/ima: loading kernel modules
tools/testing/selftests/ima/Makefile | 3 +- tools/testing/selftests/ima/common_lib.sh | 154 ++++++++++++++++ tools/testing/selftests/ima/test_kernel_module.sh | 96 ++++++++++ .../testing/selftests/ima/test_kexec_file_load.sh | 195 +++++++++++++++++++++ tools/testing/selftests/ima/test_kexec_load.sh | 53 ++---- 5 files changed, 463 insertions(+), 38 deletions(-) create mode 100755 tools/testing/selftests/ima/common_lib.sh create mode 100755 tools/testing/selftests/ima/test_kernel_module.sh create mode 100755 tools/testing/selftests/ima/test_kexec_file_load.sh
Signature · 1 line
2.7.5
Mimi Zohar
maintainerPATCH v2 1/5 selftests/ima: cleanup the kexec selftest
Remove the few bashisms and use the complete option name for clarity.
--- tools/testing/selftests/ima/test_kexec_load.sh | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
tools/testing/selftests/ima/test_kexec_load.sh +9 -9
@@ -1,7 +1,7 @@ #!/bin/sh -# SPDX-License-Identifier: GPL-2.0+ +# SPDX-License-Identifier: GPL-2.0-or-later # Loading a kernel image via the kexec_load syscall should fail -# when the kerne is CONFIG_KEXEC_VERIFY_SIG enabled and the system +# when the kernel is CONFIG_KEXEC_VERIFY_SIG enabled and the system # is booted in secureboot mode. TEST="$0"
@@ -12,8 +12,8 @@ rc=0 ksft_skip=4 # kexec requires root privileges -if [ $UID != 0 ]; then - echo "$TEST: must be run as root" >&2 +if [ $(id -ru) -ne 0 ]; then + echo "$TEST: requires root privileges" >&2 exit $ksft_skip fi
@@ -33,17 +33,17 @@ secureboot=`hexdump $file | awk '{print substr($4,length($4),1)}'` # kexec_load should fail in secure boot mode KERNEL_IMAGE="/boot/vmlinuz-`uname -r`" -kexec -l $KERNEL_IMAGE &>> /dev/null -if [ $? == 0 ]; then - kexec -u - if [ "$secureboot" == "1" ]; then +kexec --load $KERNEL_IMAGE 2>&1 > /dev/null +if [ $? -eq 0 ]; then + kexec --unload + if [ $secureboot -eq 1 ]; then echo "$TEST: kexec_load succeeded [FAIL]" rc=1 else echo "$TEST: kexec_load succeeded [PASS]" fi else - if [ "$secureboot" == "1" ]; then + if [ $secureboot -eq 1 ]; then echo "$TEST: kexec_load failed [PASS]" else echo "$TEST: kexec_load failed [FAIL]"
Signature · 1 line
2.7.5
shuah
maintainerRe: [PATCH v2 1/5] selftests/ima: cleanup the kexec selftest
Hi Mimi,
Thanks for the patches.
Quoted 13 lines · Mimi Zohar
Remove the few bashisms and use the complete option name for clarity.
Signed-off-by Mimi Zohar <zohar at linux.ibm.com>Reviewed-by Petr Vorel <pvorel at suse.cz>--- tools/testing/selftests/ima/test_kexec_load.sh | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)tools/testing/selftests/ima/test_kexec_load.sh +0
-0
tools/testing/selftests/ima/test_kexec_load.sh line 2
Quoted 3 lines
tools/testing/selftests/ima/test_kexec_load.sh +1
-1@@ -1,7 +1,7 @@ #!/bin/sh -# SPDX-License-Identifier: GPL-2.0+ +# SPDX-License-Identifier: GPL-2.0-or-later
# SPDX-License-Identifier: GPL-2.0
Quoted 31 lines
tools/testing/selftests/ima/test_kexec_load.sh +7
-7# Loading a kernel image via the kexec_load syscall should fail -# when the kerne is CONFIG_KEXEC_VERIFY_SIG enabled and the system +# when the kernel is CONFIG_KEXEC_VERIFY_SIG enabled and the system # is booted in secureboot mode. TEST="$0"@@ -12,8 +12,8 @@ rc=0 ksft_skip=4 # kexec requires root privileges -if [ $UID != 0 ]; then - echo "$TEST: must be run as root" >&2 +if [ $(id -ru) -ne 0 ]; then + echo "$TEST: requires root privileges" >&2 exit $ksft_skip fi@@ -33,17 +33,17 @@ secureboot=`hexdump $file | awk '{print substr($4,length($4),1)}'` # kexec_load should fail in secure boot mode KERNEL_IMAGE="/boot/vmlinuz-`uname -r`" -kexec -l $KERNEL_IMAGE &>> /dev/null -if [ $? == 0 ]; then - kexec -u - if [ "$secureboot" == "1" ]; then +kexec --load $KERNEL_IMAGE 2>&1 > /dev/null +if [ $? -eq 0 ]; then + kexec --unload + if [ $secureboot -eq 1 ]; then echo "$TEST: kexec_load succeeded [FAIL]"
tools/testing/selftests/ima/test_kexec_load.sh secureboot=`hexdump $file | awk '{print substr($4,length($4),1)}'` · line 49
Quoted 10 lines
tools/testing/selftests/ima/test_kexec_load.sh +1
-1rc=1 else echo "$TEST: kexec_load succeeded [PASS]" fi else - if [ "$secureboot" == "1" ]; then + if [ $secureboot -eq 1 ]; then echo "$TEST: kexec_load failed [PASS]" else echo "$TEST: kexec_load failed [FAIL]"
The rest looks good to me.
thanks,
-- Shuah
Mimi Zohar
maintainerPATCH v2 2/5 selftests/ima: define a set of common functions
In reply to Mimi ZoharDefine, update and move get_secureboot_mode() to a common file for use by other tests.
--- tools/testing/selftests/ima/Makefile | 1 + tools/testing/selftests/ima/common_lib.sh | 24 ++++++++++++++++++++++++ tools/testing/selftests/ima/test_kexec_load.sh | 17 +++-------------- 3 files changed, 28 insertions(+), 14 deletions(-) create mode 100755 tools/testing/selftests/ima/common_lib.sh
tools/testing/selftests/ima/Makefile +1 -0
@@ -5,6 +5,7 @@ ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/) ifeq ($(ARCH),x86) TEST_PROGS := test_kexec_load.sh +TEST_FILES := common_lib.sh include ../lib.mk
tools/testing/selftests/ima/common_lib.sh new file +24 -0
@@ -0,0 +1,24 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-or-later + +# The secure boot mode can be accessed either as the last integer +# of "od -An -t u1 /sys/firmware/efi/efivars/SecureBoot-*" or from +# "od -An -t u1 /sys/firmware/efi/vars/SecureBoot-*/data". +# Return 1 for SecureBoot mode enabled. +get_secureboot_mode() +{ + local efivarfs="/sys/firmware/efi/efivars" + # Make sure that efivars is mounted in the normal location + if ! grep -q "^\S\+ $efivarfs efivarfs" /proc/mounts; then + echo "$TEST: efivars is not mounted on $efivarfs" >&2 + exit $ksft_skip + fi + + # Get secureboot mode + local file="$efivarfs/../vars/SecureBoot-*/data" + if [ ! -e $file ]; then + echo "$TEST: unknown secureboot mode" >&2 + exit $ksft_skip + fi + return `od -An -t u1 /sys/firmware/efi/vars/SecureBoot-*/data` +}
tools/testing/selftests/ima/test_kexec_load.sh +3 -14
@@ -5,7 +5,7 @@ # is booted in secureboot mode. TEST="$0" -EFIVARFS="/sys/firmware/efi/efivars" +. ./common_lib.sh rc=0 # Kselftest framework requirement - SKIP code is 4.
@@ -17,19 +17,8 @@ if [ $(id -ru) -ne 0 ]; then exit $ksft_skip fi -# Make sure that efivars is mounted in the normal location -if ! grep -q "^\S\+ $EFIVARFS efivarfs" /proc/mounts; then - echo "$TEST: efivars is not mounted on $EFIVARFS" >&2 - exit $ksft_skip -fi - -# Get secureboot mode -file="$EFIVARFS/SecureBoot-*" -if [ ! -e $file ]; then - echo "$TEST: unknown secureboot mode" >&2 - exit $ksft_skip -fi -secureboot=`hexdump $file | awk '{print substr($4,length($4),1)}'` +get_secureboot_mode +secureboot=$? # kexec_load should fail in secure boot mode KERNEL_IMAGE="/boot/vmlinuz-`uname -r`"
Signature · 1 line
2.7.5
shuah
maintainerRe: [PATCH v2 2/5] selftests/ima: define a set of common functions
Quoted 30 lines · Mimi Zohar
Define, update and move
get_secureboot_mode()to a common file for use by other tests.Signed-off-by Mimi Zohar <zohar at linux.ibm.com>Reviewed-by Petr Vorel <pvorel at suse.cz>--- tools/testing/selftests/ima/Makefile | 1 + tools/testing/selftests/ima/common_lib.sh | 24 ++++++++++++++++++++++++ tools/testing/selftests/ima/test_kexec_load.sh | 17 +++-------------- 3 files changed, 28 insertions(+), 14 deletions(-)create mode 100755
tools/testing/selftests/ima/common_lib.shtools/testing/selftests/ima/Makefile +1
-0@@ -5,6 +5,7 @@ ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/) ifeq ($(ARCH),x86) TEST_PROGS := test_kexec_load.sh +TEST_FILES := common_lib.sh include ../lib.mktools/testing/selftests/ima/common_lib.sh new file +0
-0
tools/testing/selftests/ima/common_lib.sh line 2
Quoted 2 lines
tools/testing/selftests/ima/common_lib.sh new file +2
-0@@ -0,0 +1,24 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-or-later
# SPDX-License-Identifier: GPL-2.0
Quoted 48 lines
tools/testing/selftests/ima/common_lib.sh new file +22
-0+ +# The secure boot mode can be accessed either as the last integer +# of "od -An -t u1 /sys/firmware/efi/efivars/SecureBoot-*" or from +# "od -An -t u1 /sys/firmware/efi/vars/SecureBoot-*/data". +# Return 1 for SecureBoot mode enabled. +get_secureboot_mode() +{ + local efivarfs="/sys/firmware/efi/efivars" + # Make sure that efivars is mounted in the normal location + if ! grep -q "^\S\+ $efivarfs efivarfs" /proc/mounts; then + echo "$TEST: efivars is not mounted on $efivarfs" >&2 + exit $ksft_skip + fi + + # Get secureboot mode + local file="$efivarfs/../vars/SecureBoot-*/data" + if [ ! -e $file ]; then + echo "$TEST: unknown secureboot mode" >&2 + exit $ksft_skip + fi + return `od -An -t u1 /sys/firmware/efi/vars/SecureBoot-*/data` +}tools/testing/selftests/ima/test_kexec_load.sh +1
-9@@ -5,7 +5,7 @@ # is booted in secureboot mode. TEST="$0" -EFIVARFS="/sys/firmware/efi/efivars" +. ./common_lib.sh rc=0 # Kselftest framework requirement - SKIP code is 4.@@ -17,19 +17,8 @@ if [ $(id -ru) -ne 0 ]; then exit $ksft_skip fi -# Make sure that efivars is mounted in the normal location -if ! grep -q "^\S\+ $EFIVARFS efivarfs" /proc/mounts; then - echo "$TEST: efivars is not mounted on $EFIVARFS" >&2 - exit $ksft_skip -fi - -# Get secureboot mode -file="$EFIVARFS/SecureBoot-*"
tools/testing/selftests/ima/test_kexec_load.sh if [ $(id -ru) -ne 0 ]; then · line 24
Quoted 10 lines
tools/testing/selftests/ima/test_kexec_load.sh +2
-5-if [ ! -e $file ]; then - echo "$TEST: unknown secureboot mode" >&2 - exit $ksft_skip -fi -secureboot=`hexdump $file | awk '{print substr($4,length($4),1)}'` +get_secureboot_mode +secureboot=$? # kexec_load should fail in secure boot mode KERNEL_IMAGE="/boot/vmlinuz-`uname -r`"
The rest looks good to me.
thanks,
-- Shuah
Re: [PATCH v2 2/5] selftests/ima: define a set of common functions
In reply to Mimi ZoharHi Mimi,
Quoted 4 lines
Define, update and move
get_secureboot_mode()to a common file for use by other tests.Signed-off-by Mimi Zohar <zohar at linux.ibm.com>
...
Quoted 3 lines
ifeq ($(ARCH),x86)
TEST_PROGS:=test_kexec_load.sh
+TEST_FILES :=common_lib.sh
In case there might be some common library for whole selftest, I'd name this ima_lib.sh. (even it won't be in the same directory it might be better for readability).
tools/testing/selftests/ima/common_lib.sh line 2
Quoted 10 lines
include
../lib.mktools/testing/selftests/ima/common_lib.sh new file +2
-0@@ -0,0 +1,24 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-or-later
I'm sorry, that was me who advised GPL v2+ instead of GPL v2 only :).
...
Kind regards,
Petr
Mimi Zohar
maintainerPATCH v2 3/5 selftests/ima: define common logging functions
In reply to Mimi ZoharDefine log_info, log_pass, log_fail, and log_skip functions.
--- tools/testing/selftests/ima/common_lib.sh | 43 +++++++++++++++++++++++--- tools/testing/selftests/ima/test_kexec_load.sh | 19 +++--------- 2 files changed, 43 insertions(+), 19 deletions(-)
tools/testing/selftests/ima/common_lib.sh +38 -5
@@ -1,5 +1,36 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0-or-later +# +# Kselftest framework defines: ksft_pass=0, ksft_fail=1, ksft_skip=4 + +VERBOSE="${VERBOSE:-1}" + +log_info() +{ + [ $VERBOSE -ne 0 ] && echo "[INFO] $1" +} + +# The ksefltest framework requirement returns 0 for PASS. +log_pass() +{ + + [ $VERBOSE -ne 0 ] && echo "$1 [PASS]" + exit 0 +} + +# The ksefltest framework requirement returns 1 for FAIL. +log_fail() +{ + [ $VERBOSE -ne 0 ] && echo "$1 [FAIL]" + exit 1 +} + +# The ksefltest framework requirement returns 4 for SKIP. +log_skip() +{ + [ $VERBOSE -ne 0 ] && echo "$1" + exit 4 +} # The secure boot mode can be accessed either as the last integer # of "od -An -t u1 /sys/firmware/efi/efivars/SecureBoot-*" or from
@@ -8,17 +39,19 @@ get_secureboot_mode() { local efivarfs="/sys/firmware/efi/efivars" + # Make sure that efivars is mounted in the normal location if ! grep -q "^\S\+ $efivarfs efivarfs" /proc/mounts; then - echo "$TEST: efivars is not mounted on $efivarfs" >&2 - exit $ksft_skip + log_skip "efivars is not mounted on $efivarfs" fi # Get secureboot mode local file="$efivarfs/../vars/SecureBoot-*/data" if [ ! -e $file ]; then - echo "$TEST: unknown secureboot mode" >&2 - exit $ksft_skip + log_skip "unknown secureboot mode" fi - return `od -An -t u1 /sys/firmware/efi/vars/SecureBoot-*/data` + ret=`od -An -t u1 /sys/firmware/efi/vars/SecureBoot-*/data` + [ $ret -eq 1 ] && log_info "secure boot mode enabled" + + return $ret }
tools/testing/selftests/ima/test_kexec_load.sh +5 -14
@@ -6,15 +6,10 @@ TEST="$0" . ./common_lib.sh -rc=0 - -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 # kexec requires root privileges if [ $(id -ru) -ne 0 ]; then - echo "$TEST: requires root privileges" >&2 - exit $ksft_skip + log_skip "requires root privileges" >&2 fi get_secureboot_mode
@@ -26,18 +21,14 @@ kexec --load $KERNEL_IMAGE 2>&1 > /dev/null if [ $? -eq 0 ]; then kexec --unload if [ $secureboot -eq 1 ]; then - echo "$TEST: kexec_load succeeded [FAIL]" - rc=1 + log_fail "kexec_load succeeded" else - echo "$TEST: kexec_load succeeded [PASS]" + log_pass "kexec_load succeeded" fi else if [ $secureboot -eq 1 ]; then - echo "$TEST: kexec_load failed [PASS]" + log_pass "kexec_load failed" else - echo "$TEST: kexec_load failed [FAIL]" - rc=1 + log_fail "kexec_load failed" fi fi - -exit $rc
Signature · 1 line
2.7.5
shuah
maintainerRe: [PATCH v2 3/5] selftests/ima: define common logging functions
Quoted 14 lines · Mimi Zohar
Define
log_info,log_pass,log_fail, andlog_skipfunctions.Suggested-by Petr Vorel <pvorel at suse.cz>Signed-off-by Mimi Zohar <zohar at linux.ibm.com>--- tools/testing/selftests/ima/common_lib.sh | 43 +++++++++++++++++++++++--- tools/testing/selftests/ima/test_kexec_load.sh | 19 +++--------- 2 files changed, 43 insertions(+), 19 deletions(-)tools/testing/selftests/ima/common_lib.sh +0
-0
tools/testing/selftests/ima/common_lib.sh line 2
Quoted 2 lines
tools/testing/selftests/ima/common_lib.sh +0
-0@@ -1,5 +1,36 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0-or-later
Same here:
# SPDX-License-Identifier: GPL-2.0
thanks,
-- Shuah
Re: [PATCH v2 3/5] selftests/ima: define common logging functions
In reply to Mimi ZoharHi Mimi,
Quoted 37 lines
Define
log_info,log_pass,log_fail, andlog_skipfunctions.Suggested-by Petr Vorel <pvorel at suse.cz>Signed-off-by Mimi Zohar <zohar at linux.ibm.com>--- tools/testing/selftests/ima/common_lib.sh | 43 +++++++++++++++++++++++--- tools/testing/selftests/ima/test_kexec_load.sh | 19 +++--------- 2 files changed, 43 insertions(+), 19 deletions(-)tools/testing/selftests/ima/common_lib.sh +21
-0@@ -1,5 +1,36 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0-or-later +# +# Kselftest framework defines: ksft_pass=0, ksft_fail=1, ksft_skip=4 + +VERBOSE="${VERBOSE:-1}" + +log_info() +{ + [ $VERBOSE -ne 0 ] && echo "[INFO] $1" +} + +# The ksefltest framework requirement returns 0 for PASS. +log_pass() +{ + + [ $VERBOSE -ne 0 ] && echo "$1 [PASS]" + exit 0 +} + +# The ksefltest framework requirement returns 1 for FAIL. +log_fail() +{
tools/testing/selftests/ima/common_lib.sh line 33
Quoted 10 lines
tools/testing/selftests/ima/common_lib.sh +10
-0+ [ $VERBOSE -ne 0 ] && echo "$1 [FAIL]" + exit 1 +} + +# The ksefltest framework requirement returns 4 for SKIP. +log_skip() +{ + [ $VERBOSE -ne 0 ] && echo "$1" + exit 4 +}
These might be good candidates for moving to selftest specific shell helper library (for somebody who wants to do this work).
Quoted 35 lines
tools/testing/selftests/ima/common_lib.sh +7
-5# The secure boot mode can be accessed either as the last integer # of "od -An -t u1 /sys/firmware/efi/efivars/SecureBoot-*" or from@@ -8,17 +39,19 @@ get_secureboot_mode() { local efivarfs="/sys/firmware/efi/efivars" + # Make sure that efivars is mounted in the normal location if ! grep -q "^\S\+ $efivarfs efivarfs" /proc/mounts; then - echo "$TEST: efivars is not mounted on $efivarfs" >&2 - exit $ksft_skip + log_skip "efivars is not mounted on $efivarfs" fi # Get secureboot mode local file="$efivarfs/../vars/SecureBoot-*/data" if [ ! -e $file ]; then - echo "$TEST: unknown secureboot mode" >&2 - exit $ksft_skip + log_skip "unknown secureboot mode" fi - return `od -An -t u1 /sys/firmware/efi/vars/SecureBoot-*/data` + ret=`od -An -t u1 /sys/firmware/efi/vars/SecureBoot-*/data` + [ $ret -eq 1 ] && log_info "secure boot mode enabled" + + return $ret }tools/testing/selftests/ima/test_kexec_load.sh +0
-0@@ -6,15 +6,10 @@ TEST="$0" . ./common_lib.sh
tools/testing/selftests/ima/test_kexec_load.sh line 12
Quoted 10 lines
tools/testing/selftests/ima/test_kexec_load.sh +1
-6-rc=0 - -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 # kexec requires root privileges if [ $(id -ru) -ne 0 ]; then - echo "$TEST: requires root privileges" >&2 - exit $ksft_skip + log_skip "requires root privileges" >&2
You left here redirection to stderr.
+ again requiring root could be in helper library.
Quoted 16 lines
tools/testing/selftests/ima/test_kexec_load.sh +2
-3fi get_secureboot_mode@@ -26,18 +21,14 @@ kexec --load $KERNEL_IMAGE 2>&1 > /dev/null if [ $? -eq 0 ]; then kexec --unload if [ $secureboot -eq 1 ]; then - echo "$TEST: kexec_load succeeded [FAIL]" - rc=1 + log_fail "kexec_load succeeded" else - echo "$TEST: kexec_load succeeded [PASS]" + log_pass "kexec_load succeeded" fi else if [ $secureboot -eq 1 ]; then
tools/testing/selftests/ima/test_kexec_load.sh kexec --load $KERNEL_IMAGE 2>&1 > /dev/null · line 43
Quoted 10 lines
tools/testing/selftests/ima/test_kexec_load.sh +2
-5- echo "$TEST: kexec_load failed [PASS]" + log_pass "kexec_load failed" else - echo "$TEST: kexec_load failed [FAIL]" - rc=1 + log_fail "kexec_load failed" fi fi - -exit $rc
Kind regards,
Petr
Re: [PATCH v2 3/5] selftests/ima: define common logging functions
In reply to Mimi ZoharHi Mimi,
Quoted 4 lines
Define
log_info,log_pass,log_fail, andlog_skipfunctions.Suggested-by Petr Vorel <pvorel at suse.cz>Signed-off-by Mimi Zohar <zohar at linux.ibm.com>
Quoted 4 lines
--- tools/testing/selftests/ima/common_lib.sh | 43 +++++++++++++++++++++++--- tools/testing/selftests/ima/test_kexec_load.sh | 19 +++--------- 2 files changed, 43 insertions(+), 19 deletions(-)
...
Quoted 3 lines
tools/testing/selftests/ima/common_lib.sh +0
-1--- a/tools/testing/selftests/ima/common_lib.sh
...
tools/testing/selftests/ima/common_lib.sh line 53
Quoted 9 lines
tools/testing/selftests/ima/common_lib.sh +2
-3# Get secureboot mode local file="$efivarfs/../vars/SecureBoot-*/data" if [ ! -e $file ]; then - echo "$TEST: unknown secureboot mode" >&2 - exit $ksft_skip + log_skip "unknown secureboot mode" fi - return `od -An -t u1 /sys/firmware/efi/vars/SecureBoot-*/data` + ret=`od -An -t u1 /sys/firmware/efi/vars/SecureBoot-*/data`
Missing local. Usually it's good to put all locals at the top.
tools/testing/selftests/ima/common_lib.sh line 57
Quoted 4 lines
tools/testing/selftests/ima/common_lib.sh +3
-0+ [ $ret -eq 1 ] && log_info "secure boot mode enabled" + + return $ret }
...
Kind regards,
Petr
Mimi Zohar
maintainerPATCH v2 4/5 selftests/ima: kexec_file_load syscall test
In reply to Mimi ZoharThe kernel can be configured to verify PE signed kernel images, IMA kernel image signatures, both types of signatures, or none. This test verifies only properly signed kernel images are loaded into memory, based on the kernel configuration and runtime policies.
--- tools/testing/selftests/ima/Makefile | 2 +- tools/testing/selftests/ima/common_lib.sh | 97 ++++++++++ .../testing/selftests/ima/test_kexec_file_load.sh | 195 +++++++++++++++++++++ tools/testing/selftests/ima/test_kexec_load.sh | 1 - 4 files changed, 293 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/ima/test_kexec_file_load.sh
tools/testing/selftests/ima/Makefile +1 -1
@@ -4,7 +4,7 @@ uname_M := $(shell uname -m 2>/dev/null || echo not) ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/) ifeq ($(ARCH),x86) -TEST_PROGS := test_kexec_load.sh +TEST_PROGS := test_kexec_load.sh test_kexec_file_load.sh TEST_FILES := common_lib.sh include ../lib.mk
tools/testing/selftests/ima/common_lib.sh +97 -0
106 lines not on this page · raw message
tools/testing/selftests/ima/test_kexec_file_load.sh new file +195 -0
195 lines not on this page · raw message
tools/testing/selftests/ima/test_kexec_load.sh +0 -1
@@ -16,7 +16,6 @@ get_secureboot_mode secureboot=$? # kexec_load should fail in secure boot mode -KERNEL_IMAGE="/boot/vmlinuz-`uname -r`" kexec --load $KERNEL_IMAGE 2>&1 > /dev/null if [ $? -eq 0 ]; then kexec --unload
Signature · 1 line
2.7.5
shuah
maintainerRe: [PATCH v2 4/5] selftests/ima: kexec_file_load syscall test
Quoted 145 lines · Mimi Zohar
The kernel can be configured to verify PE signed kernel images, IMA kernel image signatures, both types of signatures, or none. This test verifies only properly signed kernel images are loaded into memory, based on the kernel configuration and runtime policies.
Signed-off-by Mimi Zohar <zohar at linux.ibm.com>--- tools/testing/selftests/ima/Makefile | 2 +- tools/testing/selftests/ima/common_lib.sh | 97 ++++++++++ .../testing/selftests/ima/test_kexec_file_load.sh | 195 +++++++++++++++++++++ tools/testing/selftests/ima/test_kexec_load.sh | 1 - 4 files changed, 293 insertions(+), 2 deletions(-)create mode 100755
tools/testing/selftests/ima/test_kexec_file_load.shtools/testing/selftests/ima/Makefile +1
-1@@ -4,7 +4,7 @@ uname_M := $(shell uname -m 2>/dev/null || echo not) ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/) ifeq ($(ARCH),x86) -TEST_PROGS := test_kexec_load.sh +TEST_PROGS := test_kexec_load.sh test_kexec_file_load.sh TEST_FILES := common_lib.sh include ../lib.mktools/testing/selftests/ima/common_lib.sh +97
-0@@ -4,6 +4,9 @@ # Kselftest framework defines: ksft_pass=0, ksft_fail=1, ksft_skip=4 VERBOSE="${VERBOSE:-1}" +IKCONFIG="/tmp/config-`uname -r`" +KERNEL_IMAGE="/boot/vmlinuz-`uname -r`" +SECURITYFS=$(grep "securityfs" /proc/mounts | awk '{print $2}') log_info() {@@ -55,3 +58,97 @@ get_secureboot_mode() return $ret } + +# Look for config option in Kconfig file. +# Return 1 for found and 0 for not found. +kconfig_enabled() +{ + local config="$1" + local msg="$2" + + grep -E -q $config $IKCONFIG + if [ $? -eq 0 ]; then + log_info "$msg" + return 1 + fi + return 0 +} + +# Attempt to get the kernel config first via proc, and then by +# extracting it from the kernel image or the configs.ko using +# scripts/extract-ikconfig. +# Return 1 for found and 0 for not found. +get_kconfig() +{ + local proc_config="/proc/config.gz" + local module_dir="/lib/modules/`uname -r`" + local configs_module="$module_dir/kernel/kernel/configs.ko" + + if [ ! -f $proc_config ]; then + modprobe configs > /dev/null 2>&1 + fi + if [ -f $proc_config ]; then + cat $proc_config | gunzip > $IKCONFIG 2>/dev/null + if [ $? -eq 0 ]; then + return 1 + fi + fi + + local extract_ikconfig="$module_dir/source/scripts/extract-ikconfig" + if [ ! -f $extract_ikconfig ]; then + log_skip "extract-ikconfig not found" + fi + + $extract_ikconfig $KERNEL_IMAGE > $IKCONFIG 2>/dev/null + if [ $? -eq 1 ]; then + if [ ! -f $configs_module ]; then + log_skip "CONFIG_IKCONFIG not enabled" + fi + $extract_ikconfig $configs_module > $IKCONFIG + if [ $? -eq 1 ]; then + log_skip "CONFIG_IKCONFIG not enabled" + fi + fi + return 1 +} + +# Make sure that securityfs is mounted +mount_securityfs() +{ + if [ -z $SECURITYFS ]; then + SECURITYFS=/sys/kernel/security + mount -t securityfs security $SECURITYFS + fi + + if [ ! -d "$SECURITYFS" ]; then + log_fail "$SECURITYFS :securityfs is not mounted" + fi +} + +# The policy rule format is an "action" followed by key-value pairs. This +# function supports up to two key-value pairs, in any order. +# For example: action func=<keyword> [appraise_type=<type>] +# Return 1 for found and 0 for not found. +check_ima_policy() +{ + local action=$1 + local keypair1="$2" + local keypair2="$3" + + mount_securityfs + + local ima_policy=$SECURITYFS/ima/policy + if [ ! -e $ima_policy ]; then + log_fail "$ima_policy not found" + fi + + if [ -n $keypair2 ]; then + grep -e "^$action.*$keypair1" "$ima_policy" | \ + grep -q -e "$keypair2" + else + grep -q -e "^$action.*$keypair1" "$ima_policy" + fi + + [ $? -eq 0 ] && ret=1 || ret=0 + return $ret +}tools/testing/selftests/ima/test_kexec_file_load.sh new file +0
-0
tools/testing/selftests/ima/test_kexec_file_load.sh line 3
Quoted 3 lines
tools/testing/selftests/ima/test_kexec_file_load.sh new file +3
-0@@ -0,0 +1,195 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-or-later +#
Same here
# SPDX-License-Identifier: GPL-2.0
thanks,
-- Shuah
Re: [PATCH v2 4/5] selftests/ima: kexec_file_load syscall test
In reply to Mimi ZoharHi Mimi,
Quoted 6 lines
The kernel can be configured to verify PE signed kernel images, IMA kernel image signatures, both types of signatures, or none. This test verifies only properly signed kernel images are loaded into memory, based on the kernel configuration and runtime policies.
Signed-off-by Mimi Zohar <zohar at linux.ibm.com>
LGTM, minor comments below.
...
Quoted 1 line
+++
b/tools/testing/selftests/ima/common_lib.sh
...
tools/testing/selftests/ima/common_lib.sh get_secureboot_mode() · line 68
Quoted 7 lines
tools/testing/selftests/ima/common_lib.sh +7
-0+# Look for config option in Kconfig file. +# Return 1 for found and 0 for not found. +kconfig_enabled() +{ + local config="$1" + local msg="$2" +
Mixing tabs and spaces (spaces below).
Quoted 46 lines
tools/testing/selftests/ima/common_lib.sh +46
-0+ grep -E -q $config $IKCONFIG + if [ $? -eq 0 ]; then + log_info "$msg" + return 1 + fi + return 0 +} + +# Attempt to get the kernel config first via proc, and then by +# extracting it from the kernel image or the configs.ko using +# scripts/extract-ikconfig. +# Return 1 for found and 0 for not found. +get_kconfig() +{ + local proc_config="/proc/config.gz" + local module_dir="/lib/modules/`uname -r`" + local configs_module="$module_dir/kernel/kernel/configs.ko" + + if [ ! -f $proc_config ]; then + modprobe configs > /dev/null 2>&1 + fi + if [ -f $proc_config ]; then + cat $proc_config | gunzip > $IKCONFIG 2>/dev/null + if [ $? -eq 0 ]; then + return 1 + fi + fi + + local extract_ikconfig="$module_dir/source/scripts/extract-ikconfig" + if [ ! -f $extract_ikconfig ]; then + log_skip "extract-ikconfig not found" + fi + + $extract_ikconfig $KERNEL_IMAGE > $IKCONFIG 2>/dev/null + if [ $? -eq 1 ]; then + if [ ! -f $configs_module ]; then + log_skip "CONFIG_IKCONFIG not enabled" + fi + $extract_ikconfig $configs_module > $IKCONFIG + if [ $? -eq 1 ]; then + log_skip "CONFIG_IKCONFIG not enabled" + fi + fi + return 1 +} +
tools/testing/selftests/ima/common_lib.sh get_secureboot_mode() · line 124
Quoted 10 lines
tools/testing/selftests/ima/common_lib.sh +10
-0+# Make sure that securityfs is mounted +mount_securityfs() +{ + if [ -z $SECURITYFS ]; then + SECURITYFS=/sys/kernel/security + mount -t securityfs security $SECURITYFS + fi + + if [ ! -d "$SECURITYFS" ]; then + log_fail "$SECURITYFS :securityfs is not mounted"
log_fail "$SECURITYFS: securityfs is not mounted"
tools/testing/selftests/ima/common_lib.sh get_secureboot_mode() · line 134
Quoted 10 lines
tools/testing/selftests/ima/common_lib.sh +10
-0+ fi +} + +# The policy rule format is an "action" followed by key-value pairs. This +# function supports up to two key-value pairs, in any order. +# For example: action func=<keyword> [appraise_type=<type>] +# Return 1 for found and 0 for not found. +check_ima_policy() +{ + local action=$1
local action="$1"
(sorry this is nitpicking, I'd be consistent)
Quoted 9 lines
tools/testing/selftests/ima/common_lib.sh +9
-0+ local keypair1="$2" + local keypair2="$3" + + mount_securityfs + + local ima_policy=$SECURITYFS/ima/policy + if [ ! -e $ima_policy ]; then + log_fail "$ima_policy not found" + fi
tools/testing/selftests/ima/common_lib.sh get_secureboot_mode() · line 153
Quoted 10 lines
tools/testing/selftests/ima/common_lib.sh +10
-0+ + if [ -n $keypair2 ]; then + grep -e "^$action.*$keypair1" "$ima_policy" | \ + grep -q -e "$keypair2" + else + grep -q -e "^$action.*$keypair1" "$ima_policy" + fi + + [ $? -eq 0 ] && ret=1 || ret=0 + return $ret
return $? is enough here (+ ret was not defined as local and mixing tabs with spaces)
Quoted 6 lines
(quoted diff) +1
-0+}tools/testing/selftests/ima/test_kexec_file_load.sh new file +0
-0
...
Quoted 12 lines
tools/testing/selftests/ima/test_kexec_file_load.sh new file +12
-0+ # The architecture specific or a custom policy may require the + # kexec kernel image be signed. Policy rules are walked + # sequentially. As a result, a policy rule may be defined, but + # might not necessarily be used. This test assumes if a policy + # rule is specified, that is the intent. + if [ $ima_read_policy -eq 1 ]; then + check_ima_policy "appraise" "func=KEXEC_KERNEL_CHECK" \ + "appraise_type=imasig" + ret=$? + [ $ret -eq 1 ] && log_info "IMA signature required"; + fi + return $ret
tools/testing/selftests/ima/test_kexec_file_load.sh line 56
Quoted 10 lines
tools/testing/selftests/ima/test_kexec_file_load.sh new file +10
-0+} + +# The kexec_file_load_test() is complicated enough, require pesign. +# Return 1 for PE signature found and 0 for not found. +check_for_pesig() +{ + which pesign > /dev/null 2>&1 + if [ $? -eq 1 ]; then + log_skip "pesign not found" + fi
Maybe just (matter of preference)
which pesign > /dev/null 2>&1 || log_skip "pesign not found"
Quoted 10 lines
tools/testing/selftests/ima/test_kexec_file_load.sh new file +10
-0+ + pesign -i $KERNEL_IMAGE --show-signature | grep -q "No signatures" + local ret=$? + if [ $ret -eq 1 ]; then + log_info "kexec kernel image PE signed" + else + log_info "kexec kernel image not PE signed" + fi + return $ret +}
...
tools/testing/selftests/ima/test_kexec_file_load.sh line 154
Quoted 4 lines
tools/testing/selftests/ima/test_kexec_file_load.sh new file +4
-0+# kexec requires root privileges +if [ $(id -ru) -ne 0 ]; then + log_skip "requires root privileges" +fi
This is repeated several times => good candidate for helper even here in IMA specific library.
Kind regards,
Petr
Mimi Zohar
maintainerRe: [PATCH v2 4/5] selftests/ima: kexec_file_load syscall test
Quoted 12 lines · Petr Vorel
Quoted 12 lines
tools/testing/selftests/ima/common_lib.sh +12
-0+ local keypair1="$2" + local keypair2="$3" + + mount_securityfs + + local ima_policy=$SECURITYFS/ima/policy + if [ ! -e $ima_policy ]; then + log_fail "$ima_policy not found" + fi + + if [ -n $keypair2 ]; then + grep -e "^$action.*$keypair1" "$ima_policy" | \
Quoted 8 lines
tools/testing/selftests/ima/common_lib.sh get_secureboot_mode() · line 153
Quoted 7 lines
tools/testing/selftests/ima/common_lib.sh +7
-0+ grep -q -e "$keypair2" + else + grep -q -e "^$action.*$keypair1" "$ima_policy" + fi + + [ $? -eq 0 ] && ret=1 || ret=0 + return $retreturn $? is enough here (+ ret was not defined as local and mixing tabs with spaces)
"grep -q" exits with zero if any match is found. This line inverts the result so that 1 is returned for found. v3 will make "ret" local and fix the tabs/spaces.
Mimi
Re: [PATCH v2 4/5] selftests/ima: kexec_file_load syscall test
Hi Mimi,
Quoted 23 lines · Petr Vorel
Quoted 13 lines
Quoted 13 lines
tools/testing/selftests/ima/common_lib.sh +12
-0+ local keypair1="$2" + local keypair2="$3" + + mount_securityfs + + local ima_policy=$SECURITYFS/ima/policy + if [ ! -e $ima_policy ]; then + log_fail "$ima_policy not found" + fi + + if [ -n $keypair2 ]; then + grep -e "^$action.*$keypair1" "$ima_policy" | \Quoted 8 lines
tools/testing/selftests/ima/common_lib.sh get_secureboot_mode() · line 153
Quoted 7 lines
tools/testing/selftests/ima/common_lib.sh +7
-0+ grep -q -e "$keypair2" + else + grep -q -e "^$action.*$keypair1" "$ima_policy" + fi + + [ $? -eq 0 ] && ret=1 || ret=0 + return $retreturn $? is enough here (+ ret was not defined as local and mixing tabs with spaces)
Quoted 2 lines
"grep -q" exits with zero if any match is found. This line inverts the result so that 1 is returned for found.
Right. Sorry for wrong report :).
Quoted 3 lines
v3 will make "ret" local and fix the tabs/spaces.
Mimi
Kind regards,
Petr
Mimi Zohar
maintainerRe: [PATCH v2 4/5] selftests/ima: kexec_file_load syscall test
Quoted 24 lines · Petr Vorel
Hi Mimi,
Quoted 14 lines · Petr Vorel
Quoted 13 lines
Quoted 13 lines
tools/testing/selftests/ima/common_lib.sh +12
-0+ local keypair1="$2" + local keypair2="$3" + + mount_securityfs + + local ima_policy=$SECURITYFS/ima/policy + if [ ! -e $ima_policy ]; then + log_fail "$ima_policy not found" + fi + + if [ -n $keypair2 ]; then + grep -e "^$action.*$keypair1" "$ima_policy" | \Quoted 8 lines
Quoted 8 lines
tools/testing/selftests/ima/common_lib.sh get_secureboot_mode() · line 153
Quoted 7 lines
tools/testing/selftests/ima/common_lib.sh +7
-0+ grep -q -e "$keypair2" + else + grep -q -e "^$action.*$keypair1" "$ima_policy" + fi + + [ $? -eq 0 ] && ret=1 || ret=0 + return $retreturn $? is enough here (+ ret was not defined as local and
Quoted 5 lines
mixing tabs with spaces)
Quoted 2 lines
"grep -q" exits with zero if any match is found. This line inverts the result so that 1 is returned for found.
Right. Sorry for wrong report :).
Thank you so much for reviewing the patches! Other than deferring making the IMA "common" functions generic, hopefully I didn't miss anything. I just posted the v3 version.
Mimi
Quoted 6 lines
Quoted 1 line
v3 will make "ret" local and fix the tabs/spaces.
Kind regards,
Petr
Re: [PATCH v2 4/5] selftests/ima: kexec_file_load syscall test
In reply to Mimi ZoharHi Mimi,
Quoted 8 lines
The kernel can be configured to verify PE signed kernel images, IMA kernel image signatures, both types of signatures, or none. This test verifies only properly signed kernel images are loaded into memory, based on the kernel configuration and runtime policies.
Signed-off-by Mimi Zohar <zohar at linux.ibm.com>---
a/tools/testing/selftests/ima/common_lib.sh
...
Review
Quoted 2 lines
(quoted diff) +2
-0+# Look for config option in Kconfig file. +# Return 1 for found and 0 for not found.
I'd revert the return value (for shell is 0 as ok), but matter of preference.
Quoted 7 lines
tools/testing/selftests/ima/common_lib.sh +7
-0+kconfig_enabled() +{ + local config="$1" + local msg="$2" + + grep -E -q $config $IKCONFIG + if [ $? -eq 0 ]; then
tools/testing/selftests/ima/common_lib.sh get_secureboot_mode() · line 80
Quoted 10 lines
tools/testing/selftests/ima/common_lib.sh +10
-0+ log_info "$msg" + return 1 + fi + return 0 +} + +# Attempt to get the kernel config first via proc, and then by +# extracting it from the kernel image or the configs.ko using +# scripts/extract-ikconfig. +# Return 1 for found and 0 for not found.
"and 0 for not found": This is not true as it uses log_skip which exits. And you don't read this value anywhere.
Quoted 23 lines
tools/testing/selftests/ima/common_lib.sh +23
-0+get_kconfig() +{ + local proc_config="/proc/config.gz" + local module_dir="/lib/modules/`uname -r`" + local configs_module="$module_dir/kernel/kernel/configs.ko" + + if [ ! -f $proc_config ]; then + modprobe configs > /dev/null 2>&1 + fi + if [ -f $proc_config ]; then + cat $proc_config | gunzip > $IKCONFIG 2>/dev/null + if [ $? -eq 0 ]; then + return 1 + fi + fi + + local extract_ikconfig="$module_dir/source/scripts/extract-ikconfig" + if [ ! -f $extract_ikconfig ]; then + log_skip "extract-ikconfig not found" + fi + + $extract_ikconfig $KERNEL_IMAGE > $IKCONFIG 2>/dev/null + if [ $? -eq 1 ]; then
tools/testing/selftests/ima/common_lib.sh get_secureboot_mode() · line 113
Quoted 10 lines
tools/testing/selftests/ima/common_lib.sh +10
-0+ if [ ! -f $configs_module ]; then + log_skip "CONFIG_IKCONFIG not enabled" + fi + $extract_ikconfig $configs_module > $IKCONFIG + if [ $? -eq 1 ]; then + log_skip "CONFIG_IKCONFIG not enabled" + fi + fi + return 1 +}
Kind regards,
Petr
Mimi Zohar
maintainerPATCH v2 5/5 selftests/ima: loading kernel modules
In reply to Mimi ZoharWhile the appended kernel module signature can be verified, when loading a kernel module via either the init_module or the finit_module syscall, verifying the IMA signature requires access to the file descriptor, which is only available via the finit_module syscall. As "modprobe" does not provide a flag allowing the syscall - init_module or finit_module - to be specified, this patch does not load a kernel module.
This test simply verifies that on secure boot enabled systems with "CONFIG_IMA_ARCH_POLICY" configured, that at least an appended kernel module signature or an IMA signature is required based on the Kconfig and the runtime IMA policy.
--- tools/testing/selftests/ima/Makefile | 2 +- tools/testing/selftests/ima/test_kernel_module.sh | 96 +++++++++++++++++++++++ 2 files changed, 97 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/ima/test_kernel_module.sh
tools/testing/selftests/ima/Makefile +1 -1
@@ -4,7 +4,7 @@ uname_M := $(shell uname -m 2>/dev/null || echo not) ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/) ifeq ($(ARCH),x86) -TEST_PROGS := test_kexec_load.sh test_kexec_file_load.sh +TEST_PROGS := test_kexec_load.sh test_kexec_file_load.sh test_kernel_module.sh TEST_FILES := common_lib.sh include ../lib.mk
tools/testing/selftests/ima/test_kernel_module.sh new file +96 -0
96 lines not on this page · raw message
Signature · 1 line
2.7.5
shuah
maintainerRe: [PATCH v2 5/5] selftests/ima: loading kernel modules
Quoted 39 lines · Mimi Zohar
While the appended kernel module signature can be verified, when loading a kernel module via either the
init_moduleor thefinit_modulesyscall, verifying the IMA signature requires access to the file descriptor, which is only available via thefinit_modulesyscall. As "modprobe" does not provide a flag allowing the syscall -init_moduleorfinit_module- to be specified, this patch does not load a kernel module.This test simply verifies that on secure boot enabled systems with "
CONFIG_IMA_ARCH_POLICY" configured, that at least an appended kernel module signature or an IMA signature is required based on theKconfigand the runtime IMA policy.Signed-off-by Mimi Zohar <zohar at linux.ibm.com>--- tools/testing/selftests/ima/Makefile | 2 +- tools/testing/selftests/ima/test_kernel_module.sh | 96 +++++++++++++++++++++++ 2 files changed, 97 insertions(+), 1 deletion(-)create mode 100755
tools/testing/selftests/ima/test_kernel_module.shtools/testing/selftests/ima/Makefile +1
-1@@ -4,7 +4,7 @@ uname_M := $(shell uname -m 2>/dev/null || echo not) ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/) ifeq ($(ARCH),x86) -TEST_PROGS := test_kexec_load.sh test_kexec_file_load.sh +TEST_PROGS := test_kexec_load.sh test_kexec_file_load.sh test_kernel_module.sh TEST_FILES := common_lib.sh include ../lib.mktools/testing/selftests/ima/test_kernel_module.sh new file +0
-0
tools/testing/selftests/ima/test_kernel_module.sh line 2
Quoted 2 lines
tools/testing/selftests/ima/test_kernel_module.sh new file +2
-0@@ -0,0 +1,96 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-or-later
Same here
# SPDX-License-Identifier: GPL-2.0
Quoted 52 lines
tools/testing/selftests/ima/test_kernel_module.sh new file +52
-0+# +# On secure boot enabled systems with "CONFIG_IMA_ARCH_POLICY" configured, +# this test verifies that at least an appended kernel module signature or +# an IMA signature is required. It does not attempt to load a kernel module. + +TEST="KERNEL_MODULE" +. ./common_lib.sh + +trap "{ rm -f $IKCONFIG ; }" EXIT + +# Some of the IMA builtin policies may require the kernel modules to +# be signed, but these policy rules may be replaced with a custom +# policy. Only CONFIG_IMA_APPRAISE_REQUIRE_MODULE_SIGS persists after +# loading a custom policy. Check if it is enabled, before reading the +# IMA runtime sysfs policy file. +# Return 1 for IMA signature required and 0 for not required. +is_ima_sig_required() +{ + local ret=0 + + kconfig_enabled "CONFIG_IMA_APPRAISE_REQUIRE_MODULE_SIGS=y" \ + "IMA kernel module signature required" + if [ $? -eq 1 ]; then + log_info "IMA kernel module signature required" + return 1 + fi + + # The architecture specific or a custom policy may require the + # kernel module to be signed. Policy rules are walked sequentially. + # As a result, a policy rule may be defined, but might not necessarily + # be used. This test assumes if a policy rule is specified, that is + # the intent. + if [ $ima_read_policy -eq 1 ]; then + check_ima_policy "appraise" "func=MODULE_CHECK" \ + "appraise_type=imasig" + ret=$? + [ $ret -eq 1 ] && log_info "IMA signature required"; + fi + return $ret +} + +# loading kernel modules requires root privileges +if [ $(id -ru) -ne 0 ]; then + log_skip "requires root privileges" +fi + +# Are appended signatures required? +if [ -e /sys/module/module/parameters/sig_enforce ]; then + sig_enforce=$(cat /sys/module/module/parameters/sig_enforce) + if [ $sig_enforce = "Y" ]; then + log_pass "appended kernel module signature required" + fi
tools/testing/selftests/ima/test_kernel_module.sh line 64
Quoted 10 lines
tools/testing/selftests/ima/test_kernel_module.sh new file +10
-0+fi + +get_secureboot_mode +if [ $? -eq 0 ]; then + log_skip "secure boot not enabled" +fi + +# get the kernel config +get_kconfig +
get_kconfig() will be good candidate as a kselftest common function. Is that possible?
Quoted 23 lines
tools/testing/selftests/ima/test_kernel_module.sh new file +22
-0+# Determine which kernel config options are enabled +kconfig_enabled "CONFIG_IMA_ARCH_POLICY=y" \ + "architecture specific policy enabled" +arch_policy=$? + +kconfig_enabled "CONFIG_MODULE_SIG=y" \ + "appended kernel modules signature enabled" +appended_sig_enabled=$? + +kconfig_enabled "CONFIG_IMA_READ_POLICY=y" "reading IMA policy permitted" +ima_read_policy=$? + +is_ima_sig_required +ima_sig_required=$? + +if [ $arch_policy -eq 0 ]; then + log_skip "architecture specific policy not enabled" +fi + +if [ $appended_sig_enabled -eq 1 ]; then + log_fail "appended kernel module signature enabled, but not required" +fi
tools/testing/selftests/ima/test_kernel_module.sh line 96
Quoted 10 lines
tools/testing/selftests/ima/test_kernel_module.sh new file +10
-0+ +if [ $ima_sig_required -eq 1 ]; then + log_pass "IMA kernel module signature required" +fi + +if [ $ima_read_policy -eq 1 ]; then + log_fail "IMA kernel module signature not required" +else + log_skip "reading IMA policy not permitted" +fi
thanks,
-- Shuah
Mimi Zohar
maintainerRe: [PATCH v2 5/5] selftests/ima: loading kernel modules
Hi Shuah,
Quoted 11 lines
tools/testing/selftests/ima/test_kernel_module.sh line 2
Quoted 8 lines
tools/testing/selftests/ima/test_kernel_module.sh new file +2
-0@@ -0,0 +1,96 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-or-laterSame here
Quoted 1 line
# SPDX-License-Identifier: GPL-2.0
Sure, I'll make the change here and in the other places.
Quoted 11 lines
tools/testing/selftests/ima/test_kernel_module.sh line 64
Quoted 8 lines
tools/testing/selftests/ima/test_kernel_module.sh new file +8
-0+get_secureboot_mode +if [ $? -eq 0 ]; then + log_skip "secure boot not enabled" +fi + +# get the kernel config +get_kconfig +
get_kconfig()will be good candidate as a kselftest common function. Is that possible?
Sure, where would it go? get_kconfig calls log_skip. I didn't see any common logging functions. Petr suggested defining a set of common logging functions. Did you want to only make "log_skip" a common function or the other logging functions log_pass, log_fail, log_info as well?
Thanks,
Mimi
shuah
maintainerRe: [PATCH v2 5/5] selftests/ima: loading kernel modules
Hi Mimi,
Quoted 13 lines · Mimi Zohar
Hi Shuah,
Quoted 11 lines
tools/testing/selftests/ima/test_kernel_module.sh line 2
Quoted 8 lines
tools/testing/selftests/ima/test_kernel_module.sh new file +2
-0@@ -0,0 +1,96 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-or-laterSame here
Quoted 5 lines
Quoted 1 line
# SPDX-License-Identifier: GPL-2.0
Sure, I'll make the change here and in the other places.
Thanks.
Quoted 12 lines
Quoted 11 lines
tools/testing/selftests/ima/test_kernel_module.sh line 64
Quoted 8 lines
tools/testing/selftests/ima/test_kernel_module.sh new file +8
-0+get_secureboot_mode +if [ $? -eq 0 ]; then + log_skip "secure boot not enabled" +fi + +# get the kernel config +get_kconfig +
get_kconfig()will be good candidate as a kselftest common function. Is that possible?
Quoted 6 lines
Sure, where would it go? get_kconfig calls
log_skip. I didn't see any common logging functions. Petr suggested defining a set of common logging functions. Did you want to only make "log_skip" a common function or the other logging functionslog_pass,log_fail,log_infoas well?
We can do this as a separate effort in the interest of getting these in the interest of getting these in.
We have common functions in ksefltest.h for c and we don't have them for tests scripts. We might be able to collect common routines such as get_kconfig into a common .sh and include in tests. If you have time to do this, that will be great. It can be done as a separate effort.
thanks,
-- Shuah
Mimi Zohar
maintainerRe: [PATCH v2 5/5] selftests/ima: loading kernel modules
Quoted 20 lines
Quoted 13 lines
Quoted 12 lines
tools/testing/selftests/ima/test_kernel_module.sh line 64
Quoted 9 lines
tools/testing/selftests/ima/test_kernel_module.sh new file +8
-0+get_secureboot_mode +if [ $? -eq 0 ]; then + log_skip "secure boot not enabled" +fi + +# get the kernel config +get_kconfig +
get_kconfig()will be good candidate as a kselftest common function. Is that possible?Quoted 6 lines
Sure, where would it go? get_kconfig calls
log_skip. I didn't see any common logging functions. Petr suggested defining a set of common logging functions. Did you want to only make "log_skip" a common function or the other logging functionslog_pass,log_fail,log_infoas well?
Quoted 7 lines
We can do this as a separate effort in the interest of getting these in the interest of getting these in.
We have common functions in
ksefltest.hfor c and we don't have them for tests scripts. We might be able to collect common routines such asget_kconfiginto a common .sh and include in tests. If you have time to do this, that will be great. It can be done as a separate effort.
Ok. For now, I'm waiting for some review/ack's.
Mimi
Re: [PATCH v2 5/5] selftests/ima: loading kernel modules
In reply to shuahHi Shuah,
Quoted 7 lines
We can do this as a separate effort in the interest of getting these in the interest of getting these in.
We have common functions in
ksefltest.hfor c and we don't have them for tests scripts. We might be able to collect common routines such asget_kconfiginto a common .sh and include in tests. If you have time to do this, that will be great. It can be done as a separate effort.
Some inspiration, what sort of helpers can be for shell see LTP shell API [1]. These helpers tests help tests to be short, readable and with unified output. (I like library variables [2] which are self describing and making test even shorter), setup and cleanup functions called automatically, ...
The same applies for C API [3] (e.g. SAFE_*() helpers for handling errors, ...).
I wonder if there is even any interest of having any sort of helpers or even framework for shell, when so far there was nothing.
Quoted 2 lines
thanks,
-- Shuah
Kind regards,
Petr
[1] https://github.com/linux-test-project/ltp/wiki/Test-Writing-Guidelines#23-writing-a-testcase-in-shell
[2] https://github.com/linux-test-project/ltp/wiki/Test-Writing-Guidelines#232-library-variables
[3] https://github.com/linux-test-project/ltp/wiki/Test-Writing-Guidelines#22-writing-a-test-in-c
Re: [PATCH v2 5/5] selftests/ima: loading kernel modules
In reply to Mimi ZoharHi Mimi,
Quoted 8 lines
While the appended kernel module signature can be verified, when loading a kernel module via either the
init_moduleor thefinit_modulesyscall, verifying the IMA signature requires access to the file descriptor, which is only available via thefinit_modulesyscall. As "modprobe" does not provide a flag allowing the syscall -init_moduleorfinit_module- to be specified, this patch does not load a kernel module.
Quoted 6 lines
This test simply verifies that on secure boot enabled systems with "
CONFIG_IMA_ARCH_POLICY" configured, that at least an appended kernel module signature or an IMA signature is required based on theKconfigand the runtime IMA policy.Signed-off-by Mimi Zohar <zohar at linux.ibm.com>
...
Quoted 1 line
tools/testing/selftests/ima/test_kernel_module.sh +0
-0
...
tools/testing/selftests/ima/test_kernel_module.sh line 55
Quoted 7 lines
tools/testing/selftests/ima/test_kernel_module.sh +7
-0+# Are appended signatures required? +if [ -e /sys/module/module/parameters/sig_enforce ]; then + sig_enforce=$(cat /sys/module/module/parameters/sig_enforce) + if [ $sig_enforce = "Y" ]; then + log_pass "appended kernel module signature required" + fi +fi
Another possible helper [1]:is_enabled() # or sysfs_enabled
{
[ -f "$1" ] && [ "$(cat $1)" = "Y" -o "$(cat $1)" = "1" ]
}is_enabled /sys/module/module/parameters/sig_enforce && \
log_pass "appended kernel module signature required"
...
Kind regards,
Petr
[1] https://github.com/linux-test-project/ltp/blob/master/ver_linux#L30
Mimi Zohar
maintainerRe: [PATCH v2 5/5] selftests/ima: loading kernel modules
Quoted 30 lines · Petr Vorel
Hi Mimi,
Quoted 8 lines
While the appended kernel module signature can be verified, when loading a kernel module via either the
init_moduleor thefinit_modulesyscall, verifying the IMA signature requires access to the file descriptor, which is only available via thefinit_modulesyscall. As "modprobe" does not provide a flag allowing the syscall -init_moduleorfinit_module- to be specified, this patch does not load a kernel module.Quoted 6 lines
This test simply verifies that on secure boot enabled systems with "
CONFIG_IMA_ARCH_POLICY" configured, that at least an appended kernel module signature or an IMA signature is required based on theKconfigand the runtime IMA policy.Signed-off-by Mimi Zohar <zohar at linux.ibm.com>Reviewed-by Petr Vorel <pvorel at suse.cz>...
Quoted 1 line
tools/testing/selftests/ima/test_kernel_module.sh +0
-0...
tools/testing/selftests/ima/test_kernel_module.sh line 55
Quoted 7 lines
tools/testing/selftests/ima/test_kernel_module.sh +7
-0+# Are appended signatures required? +if [ -e /sys/module/module/parameters/sig_enforce ]; then + sig_enforce=$(cat /sys/module/module/parameters/sig_enforce) + if [ $sig_enforce = "Y" ]; then + log_pass "appended kernel module signature required" + fi +fiAnother possible helper [1]:
is_enabled()# orsysfs_enabled
Quoted 7 lines
{ [ -f "$1" ] && [ "$(cat $1)" = "Y" -o "$(cat $1)" = "1" ] }
is_enabled/sys/module/module/parameters/sig_enforce&&
log_pass"appended kernel module signature required"
Agreed. As this is being used only here in the IMA selftests, deferring making this change until there is a generic common library.
Mimi