misc: hpilo: Do not claim on unsupported hardware
v2 cover misc: hpilo: Do not claim on unsupported hardware
This patch series prevent unsupported hardwares from using the hpilo module:
1) Instead of having explicit if statement to check SSID 0x1979, provide a pci_device_id table of devices to blacklist.
2) Add unsupported hardware with SSID 0x0289 to the blacklist table.
Changes since v1:
- Merge v1 patches 1 and 2 as v2 patch 1.
- Drop v1 patch 4 that bumps up version.
- Improve documentation of each patch.
Matt Hsiao (2):
misc: hpilo: Exclude unsupported device via blacklist
misc: hpilo: Do not claim unsupported hardware
drivers/misc/hpilo.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
Signature · 1 line
1.8.3.1
PATCH v2 1/2 misc: hpilo: Exclude unsupported device via blacklist
Instead of having explicit if statements excluding devices, use a pci_device_id table of devices to blacklist.
HPE will put out minor updates to the iLO using the same device info except for the subsystem device id. hpilo driver takes the approach to claim based upon {Vendor, Device, SubVendor} and it allows old software to work on new hardware without patching.
As our primary way to support our customers is via distros, the patching process could take months to go upstream and then backported to multiple releases of multiple distros.
This approach worked fairly well as this is only the second time in 10+ years that we need to blacklist an instance.
--- drivers/misc/hpilo.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/misc/hpilo.c +9 -3
@@ -29,6 +29,11 @@static unsigned int ilo_major;static unsigned int max_ccb =16 ;static char ilo_hwdev[MAX_ILO_DEV ]; +static const struct pci_device_id ilo_blacklist[] = { +/* auxiliary iLO */ + {PCI_DEVICE_SUB (PCI_VENDOR_ID_HP ,0x3307 ,PCI_VENDOR_ID_HP ,0x1979 )}, + {} +};static inline int get_entry_id (int entry) {
@@ -763,9 +768,10 @@ static int ilo_probe(struct pci_dev *pdev,int devnum, minor, start, error =0 ;struct ilo_hwinfo *ilo_hw; -/* Ignore subsystem_device = 0x1979 (set by BIOS) */ -if (pdev->subsystem_device ==0x1979 ) -return 0 ; +if (pci_match_id (ilo_blacklist, pdev)) { +dev_dbg (&pdev->dev,"Not supported on this device\n" ); +return -ENODEV ; + }if (max_ccb >MAX_CCB ) max_ccb =MAX_CCB ;
Signature · 1 line
1.8.3.1
PATCH v2 2/2 misc: hpilo: Do not claim unsupported hardware
In reply to Matt HsiaoCL2600/CL2800 servers leveraged Proliant hardware but are targeted to a different market segment and come with a different firmware base. Based upon targeted market needs, the servers de-featured certain aspects of iLO.
As a result, hpilo driver still claims the hardware but is not functional, so we decided to blacklist it with SSID 0x0289 to reduce confusion to customers.
--- drivers/misc/hpilo.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/misc/hpilo.c +2 -0
@@ -32,6 +32,8 @@static const struct pci_device_id ilo_blacklist[] = {/* auxiliary iLO */ {PCI_DEVICE_SUB (PCI_VENDOR_ID_HP ,0x3307 ,PCI_VENDOR_ID_HP ,0x1979 )}, +/* CL */ + {PCI_DEVICE_SUB (PCI_VENDOR_ID_HP ,0x3307 ,PCI_VENDOR_ID_HP_3PAR ,0x0289 )}, {} };
Signature · 1 line
1.8.3.1