Fix various checkpatch warnings
Subsystems (3)
v3 cover Fix various checkpatch warnings
This patch series fixes the following:
-logical continuations warning
-avoid multiple line dereference
v2:
-make these a patch series
v3:
-correctly remake these in a patch series
Daniela Mormocea (2):
Fix multiple line dereference
Fix logical continuations warnings
.../vc04_services/bcm2835-camera/bcm2835-camera.c | 51 ++++++++-------------- 1 file changed, 19 insertions(+), 32 deletions(-)
Signature · 1 line
2.7.4
PATCH v3 1/2 Fix multiple line dereference
Fix multiple line dereference to avoid checkpatch warnings
--- .../vc04_services/bcm2835-camera/bcm2835-camera.c | 39 ++++++++-------------- 1 file changed, 13 insertions(+), 26 deletions(-)
drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +13 -26
@@ -312,8 +312,7 @@ static void buffer_cleanup(struct vb2_buffer *vb)static inline bool is_capturing (struct bm2835_mmal_dev *dev) {return dev->capture.camera_port == - &dev-> - component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_CAPTURE ]; + &dev->component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_CAPTURE ]; } static void buffer_cb(struct vchiq_mmal_instance *instance,
@@ -751,8 +750,7 @@ static int vidioc_overlay(struct file *file, void *f, unsigned int on)return 0 ;/* already in requested state */ src = - &dev->component[MMAL_COMPONENT_CAMERA ]-> - output[MMAL_CAMERA_PORT_PREVIEW ]; + &dev->component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_PREVIEW ];if (!on) {/* disconnect preview ports and disable component */
@@ -807,8 +805,7 @@ static int vidioc_g_fbuf(struct file *file, void *fh,*/ struct bm2835_mmal_dev *dev =video_drvdata (file);struct vchiq_mmal_port *preview_port = - &dev->component[MMAL_COMPONENT_CAMERA ]-> - output[MMAL_CAMERA_PORT_PREVIEW ]; + &dev->component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_PREVIEW ]; a->capability =V4L2_FBUF_CAP_EXTERNOVERLAY |V4L2_FBUF_CAP_GLOBAL_ALPHA ;
@@ -1000,8 +997,7 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev, dev->capture.camera_port, NULL); dev->capture.camera_port =NULL ; ret =vchiq_mmal_component_disable (dev->instance, - dev->capture. - encode_component); + dev->capture.encode_component);if (ret) v4l2_err(&dev->v4l2_dev, "Failed to disable encode component %d\n",
@@ -1016,26 +1012,22 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,if (f->fmt.pix.width <= max_video_width && f->fmt.pix.height <= max_video_height) camera_port = port = - &dev->component[MMAL_COMPONENT_CAMERA ]-> - output[MMAL_CAMERA_PORT_VIDEO ]; + &dev->component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_VIDEO ];else camera_port = port = - &dev->component[MMAL_COMPONENT_CAMERA ]-> - output[MMAL_CAMERA_PORT_CAPTURE ]; + &dev->component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_CAPTURE ];break ;case MMAL_COMPONENT_IMAGE_ENCODE : encode_component = dev->component[MMAL_COMPONENT_IMAGE_ENCODE ]; port = &dev->component[MMAL_COMPONENT_IMAGE_ENCODE ]->output[0 ]; camera_port = - &dev->component[MMAL_COMPONENT_CAMERA ]-> - output[MMAL_CAMERA_PORT_CAPTURE ]; + &dev->component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_CAPTURE ];break ;case MMAL_COMPONENT_VIDEO_ENCODE : encode_component = dev->component[MMAL_COMPONENT_VIDEO_ENCODE ]; port = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE ]->output[0 ]; camera_port = - &dev->component[MMAL_COMPONENT_CAMERA ]-> - output[MMAL_CAMERA_PORT_VIDEO ]; + &dev->component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_VIDEO ];break ;default :break ;
@@ -1077,13 +1069,11 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,if (!ret && camera_port == - &dev->component[MMAL_COMPONENT_CAMERA ]-> - output[MMAL_CAMERA_PORT_VIDEO ]) { + &dev->component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_VIDEO ]) {bool overlay_enabled = !!dev->component[MMAL_COMPONENT_PREVIEW ]->enabled;struct vchiq_mmal_port *preview_port = - &dev->component[MMAL_COMPONENT_CAMERA ]-> - output[MMAL_CAMERA_PORT_PREVIEW ]; + &dev->component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_PREVIEW ];/* Preview and encode ports need to match on resolution */ if (overlay_enabled) {/* Need to disable the overlay before we can update
@@ -1677,8 +1667,7 @@ static int mmal_init(struct bm2835_mmal_dev *dev)/* get the video encoder component ready */ ret =vchiq_mmal_component_init (dev->instance,"ril.video_encode" , - &dev-> - component[MMAL_COMPONENT_VIDEO_ENCODE ]); + &dev->component[MMAL_COMPONENT_VIDEO_ENCODE ]);if (ret <0 ) goto unreg_image_encoder;
@@ -1801,12 +1790,10 @@ static void bcm2835_cleanup_instance(struct bm2835_mmal_dev *dev) dev->component[MMAL_COMPONENT_CAMERA]);vchiq_mmal_component_finalise (dev->instance, - dev-> - component[MMAL_COMPONENT_VIDEO_ENCODE ]); + dev->component[MMAL_COMPONENT_VIDEO_ENCODE ]);vchiq_mmal_component_finalise (dev->instance, - dev-> - component[MMAL_COMPONENT_IMAGE_ENCODE ]); + dev->component[MMAL_COMPONENT_IMAGE_ENCODE ]);vchiq_mmal_component_finalise (dev->instance, dev->component[MMAL_COMPONENT_PREVIEW ]);
Signature · 1 line
2.7.4
PATCH v3 2/2 Fix logical continuations warnings
In reply to Daniela MormoceaFix boolean operators break in the right place
--- .../staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +6 -6
@@ -512,8 +512,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)msleep (300 );/* enable the connection from camera to encoder (if applicable) */ -if (dev->capture.camera_port != dev->capture.port - && dev->capture.camera_port) { +if (dev->capture.camera_port != dev->capture.port && + dev->capture.camera_port) { ret =vchiq_mmal_port_enable (dev->instance, dev->capture.camera_port,NULL );if (ret) {
@@ -1009,8 +1009,8 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,switch (mfmt->mmal_component) {case MMAL_COMPONENT_CAMERA :/* Make a further decision on port based on resolution */ -if (f->fmt.pix.width <= max_video_width - && f->fmt.pix.height <= max_video_height) +if (f->fmt.pix.width <= max_video_width && + f->fmt.pix.height <= max_video_height) camera_port = port = &dev->component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_VIDEO ];else
@@ -1067,8 +1067,8 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev, ret =vchiq_mmal_port_set_format (dev->instance, camera_port); -if (!ret - && camera_port == +if (!ret && + camera_port == &dev->component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_VIDEO ]) {bool overlay_enabled = !!dev->component[MMAL_COMPONENT_PREVIEW ]->enabled;
Signature · 1 line
2.7.4
Re: [Outreachy kernel] [PATCH v3 2/2] Fix logical continuations warnings
The subject line needs to indicate the affected driver.
I'm not sure to understand "logical continuations".
Quoted 1 line · Daniela Mormocea
Fix boolean operators break in the right place
Try to come up with a description that says something other than Fix. There may be many possible fixes, so saying Fix doesn't really indicate what you have done.
Consider mentioning that the problem was found with checkpatch, if that is the case.
julia
Quoted 52 lines
Signed-off-by Daniela Mormocea <[email protected]>--- .../staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +6
-7@@ -512,8 +512,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)msleep (300 );/* enable the connection from camera to encoder (if applicable) */ -if (dev->capture.camera_port != dev->capture.port - && dev->capture.camera_port) { +if (dev->capture.camera_port != dev->capture.port && + dev->capture.camera_port) { ret =vchiq_mmal_port_enable (dev->instance, dev->capture.camera_port,NULL );if (ret) {@@ -1009,8 +1009,8 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,switch (mfmt->mmal_component) {case MMAL_COMPONENT_CAMERA :/* Make a further decision on port based on resolution */ -if (f->fmt.pix.width <= max_video_width - && f->fmt.pix.height <= max_video_height) +if (f->fmt.pix.width <= max_video_width && + f->fmt.pix.height <= max_video_height) camera_port = port = &dev->component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_VIDEO ];else @@ -1067,8 +1067,8 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev, ret =vchiq_mmal_port_set_format (dev->instance, camera_port); -if (!ret - && camera_port == +if (!ret && + camera_port == &dev->component[MMAL_COMPONENT_CAMERA ]->output[MMAL_CAMERA_PORT_VIDEO ]) {bool overlay_enabled = !!dev->component[MMAL_COMPONENT_PREVIEW ]->enabled; --2.7.4
--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/1551810072-27010-1-git-send-email-daniela.mormocea%40gmail.com.
For more options, visit https://groups.google.com/d/optout.