Skip to contentSkip to conversation

w1: add support for MAX31826 digital temperature sensor with 1Kb eeprom

PATCH New Lad Prabhakar 1 participant 1 message Mar 7, 2019 W1 dallas's 1-wire bus

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 w1: add support for MAX31826 digital temperature sensor with 1Kb eeprom

From: "Lad, Prabhakar" <[email protected]>

this patch adds support for max31826 temperature sensor with 1Kb eeprom.

the temprature values can be read from file:
/sys/bus/w1/devices/3b-0000003c0cfe/w1_slave

and the eeprom can be read/written from file:
/sys/bus/w1/devices/3b-0000003c0cfe/eeprom

---
Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31826.pdf

Temperature reading example:
/sys/bus/w1/devices/3b-0000003c0cfe$ cat w1_slave 87 02 ff ff f0 ff ff ff b0 : crc=b0 YES 87 02 ff ff f0 ff ff ff b0 t=40437

Reading the eeprom contents:
/sys/bus/w1/devices/3b-0000003c0cfe$ cat eeprom | hexdump -Cv

 00000000  48 65 6c 6c 6f 20 57 6f  72 6c 64 20 4d 41 78 33  |Hello World MAx3|
 00000010  31 38 32 36 20 74 65 6d  70 65 72 61 74 75 72 65  |1826 temperature|
 00000020  20 73 65 6e 73 6f 72 20  77 69 74 68 20 31 4b 20  | sensor with 1K |
 00000030  65 65 70 72 6f 6d 20 0a  00 00 00 00 00 00 00 00  |eeprom .........|
 00000040  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
 00000050  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
 00000060  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
 00000070  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

00000080

 drivers/w1/slaves/Kconfig       |   9 +
 drivers/w1/slaves/Makefile      |   1 +
 drivers/w1/slaves/w1_max31826.c | 490 ++++++++++++++++++++++++++++++++++++++++
 drivers/w1/w1_family.h          |   1 +
 4 files changed, 501 insertions(+)
 create mode 100644 drivers/w1/slaves/w1_max31826.c
drivers/w1/slaves/Kconfig +9 -0
index cfe74d0..fcac213 100644
@@ -132,4 +132,13 @@ config W1_SLAVE_BQ27000
 	  Say Y here if you want to use a hdq
 	  bq27000 slave support.
 
+config W1_SLAVE_MAX31826
+	tristate "MAX31826 slave support"
+	help
+	  If you enable this you will have the MAX31826
+	  chip support.
+
+	  Say Y here if you want to use a 1-wire
+	  digital temperature sensor with 1kb EEPROM
+
 endmenu
drivers/w1/slaves/Makefile +1 -0
index 1e9989a..2b31d99 100644
@@ -15,3 +15,4 @@ obj-$(CONFIG_W1_SLAVE_DS2780)	+= w1_ds2780.o
 obj-$(CONFIG_W1_SLAVE_DS2781)	+= w1_ds2781.o
 obj-$(CONFIG_W1_SLAVE_BQ27000)	+= w1_bq27000.o
 obj-$(CONFIG_W1_SLAVE_DS28E04)	+= w1_ds28e04.o
+obj-$(CONFIG_W1_SLAVE_MAX31826)	+= w1_max31826.o
drivers/w1/slaves/w1_max31826.c new file +490 -0

490 lines not on this page · raw message

drivers/w1/w1_family.h +1 -0
index ed5dcb8..47243b8 100644
@@ -43,6 +43,7 @@
 #define W1_FAMILY_DS2413	0x3A
 #define W1_FAMILY_DS2406	0x12
 #define W1_THERM_DS1825		0x3B
+#define W1_FAMILY_MAX31826	0x3B
 #define W1_FAMILY_DS2781	0x3D
 #define W1_THERM_DS28EA00	0x42
 
Signature · 1 line
2.7.4