media: ov7670: fix regressions caused by "hook s_power onto v4l2 core"
cover media: ov7670: fix regressions caused by "hook s_power onto v4l2 core"
This patchset fixes the problems introduced by recent change to ov7670.
Akinobu Mita (2):
media: ov7670: restore default settings after power-up
media: ov7670: don't access registers when the device is powered off
drivers/media/i2c/ov7670.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-)
Signature · 1 line
2.7.4
PATCH 1/2 media: ov7670: restore default settings after power-up
Since commit 3d6a8fe25605 ("media: ov7670: hook s_power onto v4l2 core"), the device is actually powered off while the video stream is stopped.
The frame format and framerate are restored right after power-up, but restoring the default register settings is forgotten.
--- drivers/media/i2c/ov7670.c | 1 + 1 file changed, 1 insertion(+)
drivers/media/i2c/ov7670.c +1 -0
@@ -1664,6 +1664,7 @@ static int ov7670_s_power(struct v4l2_subdev *sd, int on)if (on) {ov7670_power_on (sd); +ov7670_init (sd,0 );ov7670_apply_fmt (sd);ov7675_apply_framerate (sd);v4l2_ctrl_handler_setup (&info->hdl);
Signature · 1 line
2.7.4
PATCH 2/2 media: ov7670: don't access registers when the device is powered off
In reply to Akinobu MitaSince commit 3d6a8fe25605 ("media: ov7670: hook s_power onto v4l2 core"), the device is actually powered off while the video stream is stopped.
So now set_format and s_frame_interval could be called while the device is powered off, but these callbacks try to change the register settings at this time.
The frame format and framerate will be restored right after power-up, so we can just postpone applying these changes at these callbacks if the device is not powered up.
--- drivers/media/i2c/ov7670.c | 31 ++++++++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-)
drivers/media/i2c/ov7670.c +26 -5
@@ -864,7 +864,15 @@ static int ov7675_set_framerate(struct v4l2_subdev *sd,/* Recalculate frame rate */ ov7675_get_framerate (sd, tpf); -return ov7675_apply_framerate (sd); +/* +* If the device is not powered up by the host driver do +* not apply any changes to H/W at this time. Instead +* the framerate will be restored right after power-up. +*/ +if (info->on) +return ov7675_apply_framerate (sd); + +return 0 ; } static void ov7670_get_framerate_legacy(struct v4l2_subdev *sd,
@@ -895,7 +903,16 @@ static int ov7670_set_framerate_legacy(struct v4l2_subdev *sd, info->clkrc = (info->clkrc &0x80 ) | div; tpf->numerator =1 ; tpf->denominator = info->clock_speed / div; -return ov7670_write (sd,REG_CLKRC , info->clkrc); + +/* +* If the device is not powered up by the host driver do +* not apply any changes to H/W at this time. Instead +* the framerate will be restored right after power-up. +*/ +if (info->on) +return ov7670_write (sd,REG_CLKRC , info->clkrc); + +return 0 ; }/*
@@ -1105,9 +1122,13 @@ static int ov7670_set_fmt(struct v4l2_subdev *sd,if (ret)return ret; - ret =ov7670_apply_fmt (sd); -if (ret) -return ret; +/* +* If the device is not powered up by the host driver do +* not apply any changes to H/W at this time. Instead +* the frame format will be restored right after power-up. +*/ +if (info->on) +return ov7670_apply_fmt (sd);return 0 ; }
Signature · 1 line
2.7.4
Quoted 6 lines · Akinobu Mita
This patchset fixes the problems introduced by recent change to ov7670.
Akinobu Mita (2):
media: ov7670: restore default settings after power-up
media: ov7670: don't access registers when the device is powered off
Quoted 7 lines
drivers/media/i2c/ov7670.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-)Cc Lubomir Rintel <[email protected]>Cc Jonathan Corbet <[email protected]>Cc Sakari Ailus <[email protected]>Cc Mauro Carvalho Chehab <[email protected]>
For the both patches in the set:
Thank you,
Lubo
Sakari Ailus
maintainerQuoted 15 lines · Lubomir Rintel
Quoted 6 lines · Akinobu Mita
This patchset fixes the problems introduced by recent change to ov7670.
Akinobu Mita (2):
media: ov7670: restore default settings after power-up
media: ov7670: don't access registers when the device is powered offQuoted 7 lines
drivers/media/i2c/ov7670.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-)Cc Lubomir Rintel <[email protected]>Cc Jonathan Corbet <[email protected]>Cc Sakari Ailus <[email protected]>Cc Mauro Carvalho Chehab <[email protected]>
Quoted 4 lines
For the both patches in the set:
Reviewed-by Lubomir Rintel <[email protected]>Tested-by Lubomir Rintel <[email protected]>
Thanks, guys!
Signature · 2 lines
Sakari Ailus [email protected]
Quoted 16 lines · Sakari Ailus
Quoted 15 lines · Lubomir Rintel
Quoted 13 lines · Akinobu Mita
This patchset fixes the problems introduced by recent change to ov7670.
Akinobu Mita (2):
media: ov7670: restore default settings after power-up
media: ov7670: don't access registers when the device is powered offdrivers/media/i2c/ov7670.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-)Cc Lubomir Rintel <[email protected]>Cc Jonathan Corbet <[email protected]>Cc Sakari Ailus <[email protected]>Cc Mauro Carvalho Chehab <[email protected]>
Quoted 7 lines
Quoted 4 lines
For the both patches in the set:
Reviewed-by Lubomir Rintel <[email protected]>Tested-by Lubomir Rintel <[email protected]>Thanks, guys!
Hi Akinobu,
I am having issues with this sensor, and your patches do not fix them for me ( maybe they are not supposed to )
My issues are like this: once I set a format and start streaming, if I stop streaming and reconfigure the format , for example YUYV after RAW, or RGB565 after RAW and viceversa, the sensor looks to have completely messed up settings: images obtained are very bad.
This did not happen for me with older kernel version (4.14 stable for example).
I can help with testing patches if you need.
My setup is with atmel-isc with parallel interface on board at91 sama5d2_xplained
Hope this helps,
Eugen
2019年3月19日(火) 18:14 <[email protected]>:
Quoted 34 lines · Sakari Ailus
Quoted 17 lines · Lubomir Rintel
Quoted 15 lines · Akinobu Mita
Quoted 13 lines
This patchset fixes the problems introduced by recent change to ov7670.
Akinobu Mita (2):
media: ov7670: restore default settings after power-up
media: ov7670: don't access registers when the device is powered offdrivers/media/i2c/ov7670.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-)Cc Lubomir Rintel <[email protected]>Cc Jonathan Corbet <[email protected]>Cc Sakari Ailus <[email protected]>Cc Mauro Carvalho Chehab <[email protected]>Quoted 7 lines
Quoted 4 lines
For the both patches in the set:
Reviewed-by Lubomir Rintel <[email protected]>Tested-by Lubomir Rintel <[email protected]>Thanks, guys!
Hi Akinobu,
I am having issues with this sensor, and your patches do not fix them for me ( maybe they are not supposed to )
Quoted 7 lines
My issues are like this: once I set a format and start streaming, if I stop streaming and reconfigure the format , for example YUYV after RAW, or RGB565 after RAW and viceversa, the sensor looks to have completely messed up settings: images obtained are very bad.
This did not happen for me with older kernel version (4.14 stable for example).
I can help with testing patches if you need.
I'd suggest identifying which commit introduced your problem.