Skip to contentSkip to conversation

FAILED: patch "[PATCH] ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line" failed to apply to 4.4-stable tree

PATCH [email protected] 1 participant 1 message Mar 11, 2019

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From ec33745bccc8f336957c751f4153421cc9ef5a54 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <[email protected]>
Date: Thu, 24 Jan 2019 13:22:57 +0100
Subject: [PATCH] ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line
on Odroid X2/U3

Commit 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common") added MMC power sequence for eMMC card of Odroid X2/U3. It reused generic sd1_cd pin control configuration node and only disabled pull-up. However that time the pinctrl configuration was not applied during MMC power sequence driver initialization. This has been changed later by commit d97a1e5d7cd2 ("mmc: pwrseq: convert to proper platform device").

It turned out then, that the provided pinctrl configuration is not correct, because the eMMC_RTSN line is being re-configured as 'special function/card detect function for mmc1 controller' not the simple 'output', thus the power sequence driver doesn't really set the pin value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this by providing separate node with eMMC_RTSN pin configuration.

Fixes 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common")
arch/arm/boot/dts/exynos4412-odroid-common.dtsi +6 -7
index 24bcad3dfba9..08d3a0a7b4eb 100644
@@ -49,7 +49,7 @@
 	};
 
 	emmc_pwrseq: pwrseq {
-		pinctrl-0 = <&sd1_cd>;
+		pinctrl-0 = <&emmc_rstn>;
 		pinctrl-names = "default";
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
@@ -165,12 +165,6 @@
 	cpu0-supply = <&buck2_reg>;
 };
 
-/* RSTN signal for eMMC */
-&sd1_cd {
-	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
 &pinctrl_1 {
 	gpio_power_key: power_key {
 		samsung,pins = "gpx1-3";
@@ -188,6 +182,11 @@
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
+
+	emmc_rstn: emmc-rstn {
+		samsung,pins = "gpk1-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &ehci {