Skip to contentSkip to conversation

Enabling PC8+ residency for all GEN9+ platforms v5

PATCH Superseded Anshuman Gupta 3 participants 7 messages Apr 3, 2019 – Apr 4, 2019

v5 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v5 cover Enabling PC8+ residency for all GEN9+ platforms v5

This patch series enable PC8+ residency test, earlier these tests were only enabled for Haswell and Broadwell.

I have addressed the below review comment provided by Imre on old series (https://patchwork.freedesktop.org/series/57035/)

1. Made this test future proof to enable for all Gen9+ platform.
2. Added a pc8_needs_screen_off flag to distinguish between HSW/BDW and Gen9+ Platform.
3. Since Gen9 onwards PC8+ residency doesn't require display to be turned off, this patch series tests PC8 residency with all screens on.

Addressed review comment provided by Ram on revision 3 (patch commit log describes the changes).

As earlier this patch series was not lucky to be tested on ICL, adding the affected test in fast-feedback.testlist.

Planning a separate series for a subtest to validate pc8 with multiple pipes usages and all planes enabled with max resolution, to create maximum memory bandwidth scenario.

Anshuman Gupta (3):
tests/i915/i915_pm_rpm: Enable PC8+ residency test for all Gen9+ tests/i915/i915_pm_rpm: modeset-pc8-residency-stress
DO_NOT_MERGE: adding i915_pm_rpm pc8 subtest to fast feedback list.

 tests/i915/i915_pm_rpm.c              | 101 ++++++++++++++++++++++++++++++----
 tests/intel-ci/fast-feedback.testlist |   3 +
 2 files changed, 94 insertions(+), 10 deletions(-)
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#1 lore raw

PATCH v5 1/3 tests/i915/i915_pm_rpm: Enable PC8+ residency test for all Gen9+

Enabled has_pc8 global for ICL and Gen9+. Modified PC8+ residency sub-test with all screen enabled.

v2:Fixed the issue of skipped test on HSW.
Improved the code comment for MSR_PKG_CST_CONFIG_CONTROL mask and PC8 bits, it holds good for SKL/ICL and Goldmont microarchitecture. Code readabilty improvement.

v3:Removed the connected_screens global. [Ram]
Removed pc8_needs_screen_off from mode_set_data structure,
made it global, aligning to has_pc8 and has_runtime_pm globals. [Ram] Reuse connector lcoal variable in init_modeset_params_for_all_screen(). [Ram] Addressed Coding guide lines comments. [Ram]

v4:Improved the code comment for MSR_PKG_CST_CONFIG_CONTROL mask and PC8 bits. [Ram]
Introduced set_screens_mode_params() function to fix warning of line exceeding 80 char, fixed this warning at other places too. [Ram]
Using ms_data modset_data global structure. [Ram]
Introduced macros for timeout values, given to PC8+ residency check function. [Ram]

---
 tests/i915/i915_pm_rpm.c | 91 +++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 83 insertions(+), 8 deletions(-)
tests/i915/i915_pm_rpm.c +83 -8
index be296f5..70e8ac7 100644
@@ -52,7 +52,11 @@
 #include "igt_device.h"
 
 #define MSR_PKG_CST_CONFIG_CONTROL	0xE2
-/* HSW/BDW: */
+/*
+ * Below PKG CST limit mask and PC8 bits are meant for
+ * HSW,BDW SKL,ICL and Goldmont Microarch.
+ * Refer IA S/W developers manual vol3c part3 chapter:35
+ */
 #define  PKG_CST_LIMIT_MASK		0xF
 #define  PKG_CST_LIMIT_C8		0x6
 
@@ -64,6 +68,10 @@
 #define MAX_ENCODERS	32
 #define MAX_CRTCS	16
 
+#define TIME_OUT_SEC_5   5
+#define TIME_OUT_SEC_10 10
+#define TIME_OUT_SEC_30 30
+
 enum pc8_status {
 	PC8_ENABLED,
 	PC8_DISABLED
@@ -90,7 +98,7 @@ enum plane_type {
 
 int drm_fd, msr_fd, pc8_status_fd;
 int debugfs;
-bool has_runtime_pm, has_pc8;
+bool has_runtime_pm, has_pc8, pc8_needs_screen_off;
 struct mode_set_data ms_data;
 
 /* Stuff used when creating FBs and mode setting. */
@@ -121,9 +129,25 @@ struct modeset_params {
 struct modeset_params lpsp_mode_params;
 struct modeset_params non_lpsp_mode_params;
 struct modeset_params *default_mode_params;
+struct modeset_params *screens_mode_params[MAX_CONNECTORS];
 
 static int8_t *pm_data = NULL;
 
+static inline void set_screens_mode_param(drmModeConnectorPtr connector,
+					  struct modeset_params *params)
+{
+	drmModeModeInfoPtr mode = NULL;
+
+	mode = &connector->modes[0];
+	igt_create_pattern_fb(drm_fd, mode->hdisplay, mode->vdisplay,
+			      DRM_FORMAT_XRGB8888, LOCAL_DRM_FORMAT_MOD_NONE,
+			      &params->fb);
+	params->crtc_id = kmstest_find_crtc_for_connector(drm_fd, ms_data.res,
+							  connector, 0);
+	params->connector_id = connector->connector_id;
+	params->mode = mode;
+}
+
 static int modprobe(const char *driver)
 {
 	return igt_kmod_load(driver, NULL);
@@ -297,6 +321,28 @@ static bool init_modeset_params_for_type(struct mode_set_data *data,
 	return true;
 }
 
+static void init_modeset_params_for_all_screen(void)
+{
+	drmModeConnectorPtr connector = NULL;
+	int screen = 0;
+
+	if (!ms_data.res)
+		return;
+
+	for (int i = 0; i < ms_data.res->count_connectors; i++) {
+		connector = ms_data.connectors[i];
+
+		if (connector->connection == DRM_MODE_CONNECTED
+		    && connector->count_modes) {
+			screens_mode_params[screen] =
+				malloc(sizeof(struct modeset_params));
+			set_screens_mode_param(connector,
+					       screens_mode_params[screen]);
+			screen++;
+		}
+	}
+}
+
 static void init_modeset_cached_params(struct mode_set_data *data)
 {
 	bool lpsp, non_lpsp;
@@ -305,6 +351,7 @@ static void init_modeset_cached_params(struct mode_set_data *data)
 					    SCREEN_TYPE_LPSP);
 	non_lpsp = init_modeset_params_for_type(data, &non_lpsp_mode_params,
 						SCREEN_TYPE_NON_LPSP);
+	init_modeset_params_for_all_screen();
 
 	if (lpsp)
 		default_mode_params = &lpsp_mode_params;
@@ -353,6 +400,22 @@ static bool enable_one_screen_with_type(struct mode_set_data *data,
 	return set_mode_for_params(params);
 }
 
+static void enable_all_screens(void)
+{
+	struct modeset_params *params = NULL;
+
+	/* SKIP if there are no connected screens. */
+	igt_require(screens_mode_params[0]);
+
+	for (int i = 0; i < MAX_CONNECTORS ; i++) {
+		params = screens_mode_params[i];
+		if (params)
+			set_mode_for_params(params);
+		else
+			break;
+	}
+}
+
 static void enable_one_screen(struct mode_set_data *data)
 {
 	/* SKIP if there are no connected screens. */
@@ -685,8 +748,12 @@ static void setup_pc8(void)
 {
 	has_pc8 = false;
 
-	/* Only Haswell supports the PC8 feature. */
-	if (!IS_HASWELL(ms_data.devid) && !IS_BROADWELL(ms_data.devid))
+	if (IS_HASWELL(ms_data.devid) || IS_BROADWELL(ms_data.devid))
+		pc8_needs_screen_off = true;
+	else if (AT_LEAST_GEN(ms_data.devid, 9))
+		pc8_needs_screen_off = false;
+	/* Only Haswell supports the PC8 feature on lesser than GEN9. */
+	else
 		return;
 
 	/* Make sure our Kernel supports MSR and the module is loaded. */
@@ -803,14 +870,22 @@ static void pc8_residency_subtest(void)
 
 	/* Make sure PC8+ residencies move! */
 	disable_all_screens(&ms_data);
-	igt_assert_f(pc8_plus_residency_changed(30),
+	igt_assert_f(pc8_plus_residency_changed(TIME_OUT_SEC_30),
 		     "Machine is not reaching PC8+ states, please check its "
 		     "configuration.\n");
 
 	/* Make sure PC8+ residencies stop! */
-	enable_one_screen(&ms_data);
-	igt_assert_f(!pc8_plus_residency_changed(10),
-		     "PC8+ residency didn't stop with screen enabled.\n");
+	if (pc8_needs_screen_off) {
+		enable_one_screen(&ms_data);
+		igt_assert_f(!pc8_plus_residency_changed(TIME_OUT_SEC_10),
+			     "PC8+ residency didn't stop with "
+			     "screen enabled.\n");
+	} else {
+		enable_all_screens();
+		igt_assert_f(pc8_plus_residency_changed(TIME_OUT_SEC_10),
+			     "Machine is not reaching PC8+ states "
+			     "with all screen enabled.\n");
+	}
 }
 
 static void modeset_subtest(enum screen_type type, int rounds, int wait_flags)
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#2 lore raw

PATCH v5 2/3 tests/i915/i915_pm_rpm: modeset-pc8-residency-stress

In reply to Anshuman Gupta

Introduced pc8_needs_screen_off flag in order to differentiate between HASWELL/BROADWELL and AT_LEAST_GEN9. GEN9 onwards PC8+ residency does't require display to be turned on.

v3:Removed pc8_needs_screen_off from mode_set_data structure,
made it global, aligning to has_pc8 and has_runtime_pm globals. [Ram] Made modeset_subtest() to tests PC8+ residency after enabling a screen, earlier it expects PC8+ residency to stop on HSW/BDW.

v4:Fixed conditional code for pc8_needs_screen_off. [Ram]
Used macros for timeout values, given to PC8+ residency check function. [Ram] Changed the screen on timeout to check pc8+ residency to 10 seconds.

---
 tests/i915/i915_pm_rpm.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
tests/i915/i915_pm_rpm.c +8 -2
index 70e8ac7..092ee64 100644
@@ -907,7 +907,7 @@ static void modeset_subtest(enum screen_type type, int rounds, int wait_flags)
 		if (wait_flags & WAIT_STATUS)
 			igt_assert(wait_for_suspended());
 		if (wait_flags & WAIT_PC8_RES)
-			igt_assert(pc8_plus_residency_changed(30));
+			igt_assert(pc8_plus_residency_changed(TIME_OUT_SEC_30));
 		if (wait_flags & WAIT_EXTRA)
 			sleep(5);
 
@@ -917,7 +917,13 @@ static void modeset_subtest(enum screen_type type, int rounds, int wait_flags)
 		if (wait_flags & WAIT_STATUS)
 			igt_assert(wait_for_active());
 		if (wait_flags & WAIT_PC8_RES)
-			igt_assert(!pc8_plus_residency_changed(5));
+			if (pc8_needs_screen_off)
+				igt_assert(!pc8_plus_residency_changed
+					   (TIME_OUT_SEC_5));
+			else
+				igt_assert(pc8_plus_residency_changed
+					   (TIME_OUT_SEC_10));
+
 		if (wait_flags & WAIT_EXTRA)
 			sleep(5);
 	}
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#3 lore raw

PATCH v5 3/3 DO_NOT_MERGE: adding i915_pm_rpm pc8 subtest to fast feedback list.

In reply to Anshuman Gupta

Forcing CI to test below sub-test on ICL.
pc8-residency
modeset-pc8-residency-stress
gem-execbuf-stress-pc8

---
 tests/intel-ci/fast-feedback.testlist | 3 +++
 1 file changed, 3 insertions(+)
tests/intel-ci/fast-feedback.testlist +3 -0
index 2d22c2c..1706ad3 100644
@@ -229,6 +229,9 @@ igt@kms_setmode@basic-clone-single-crtc
 igt@i915_pm_backlight@basic-brightness
 igt@i915_pm_rpm@basic-pci-d3-state
 igt@i915_pm_rpm@basic-rte
+igt@i915_pm_rpm@gem-execbuf-stress-pc8
+igt@i915_pm_rpm@modeset-pc8-residency-stress
+igt@i915_pm_rpm@pc8-residency
 igt@i915_pm_rps@basic-api
 igt@prime_busy@basic-after-default
 igt@prime_busy@basic-before-default
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#4 lore raw

[igt-dev] ✗ Fi.CI.BAT: failure for Enabling PC8+ residency for all GEN9+ platforms (rev5)

In reply to Anshuman Gupta
== Series Details ==

== Series Details ==

Series: Enabling PC8+ residency for all GEN9+ platforms (rev5)
URL : https://patchwork.freedesktop.org/series/57640/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_5863 -> IGTPW_2775
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_2775 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_2775, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://patchwork.freedesktop.org/api/1.0/series/57640/revisions/5/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2775:

### IGT changes ###

#### Possible regressions ####

* igt@i915_pm_rpm@gem-execbuf-stress-pc8:
- fi-bxt-j4205: NOTRUN -> FAIL +2

* igt@i915_pm_rpm@modeset-pc8-residency-stress:

    - fi-kbl-8809g:       NOTRUN -> FAIL +2
    - fi-skl-6600u:       NOTRUN -> FAIL +2
    - fi-apl-guc:         NOTRUN -> FAIL +2

* igt@i915_pm_rpm@pc8-residency:

    - fi-cfl-8109u:       NOTRUN -> FAIL +2
    - fi-kbl-7567u:       NOTRUN -> FAIL +2
    - fi-whl-u:           NOTRUN -> FAIL +2

Known issues
------------

Here are the changes found in IGTPW_2775 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_exec_store@basic-bsd1:
- fi-kbl-r: NOTRUN -> SKIP [fdo#109271] +41

* igt@i915_pm_rpm@gem-execbuf-stress-pc8:

    - fi-bsw-kefka:       NOTRUN -> SKIP [fdo#109271] +2
    - fi-bwr-2160:        NOTRUN -> SKIP [fdo#109271] +2
    - fi-gdg-551:         NOTRUN -> SKIP [fdo#109271] +2
    - fi-skl-6770hq:      NOTRUN -> SKIP [fdo#109271] +2
    - fi-kbl-guc:         NOTRUN -> SKIP [fdo#109271] +2
    - fi-byt-clapper:     NOTRUN -> SKIP [fdo#109271] +2
    - fi-skl-lmem:        NOTRUN -> SKIP [fdo#109271] +2
    - fi-byt-j1900:       NOTRUN -> SKIP [fdo#109271] +2
    - fi-cfl-guc:         NOTRUN -> SKIP [fdo#109271] +2
    - fi-skl-guc:         NOTRUN -> SKIP [fdo#109271] +2
    - fi-hsw-4770r:       NOTRUN -> SKIP [fdo#109271] +2
    - fi-skl-6700k2:      NOTRUN -> SKIP [fdo#109271] +2
    - fi-cfl-8700k:       NOTRUN -> SKIP [fdo#109271] +2

* igt@i915_pm_rpm@modeset-pc8-residency-stress:

    - fi-bdw-gvtdvm:      NOTRUN -> SKIP [fdo#109271] +2
    - fi-elk-e7500:       NOTRUN -> SKIP [fdo#109271] +2
    - fi-ilk-650:         NOTRUN -> SKIP [fdo#109271] +2
    - fi-snb-2600:        NOTRUN -> SKIP [fdo#109271] +2
    - fi-skl-gvtdvm:      NOTRUN -> SKIP [fdo#109271] +2
    - fi-bdw-5557u:       NOTRUN -> SKIP [fdo#109271] +2
    - fi-skl-iommu:       NOTRUN -> SKIP [fdo#109271] +2
    - fi-ivb-3770:        NOTRUN -> SKIP [fdo#109271] +2
    - fi-bsw-n3050:       NOTRUN -> SKIP [fdo#109271] +2

* igt@i915_pm_rpm@pc8-residency:

    - fi-pnv-d510:        NOTRUN -> SKIP [fdo#109271] +2
    - fi-snb-2520m:       NOTRUN -> SKIP [fdo#109271] +2
    - fi-byt-n2820:       NOTRUN -> SKIP [fdo#109271] +2
    - fi-kbl-x1275:       NOTRUN -> SKIP [fdo#109271] +2
    - fi-blb-e6850:       NOTRUN -> SKIP [fdo#109271] +2
    - fi-hsw-4770:        NOTRUN -> SKIP [fdo#109271] +2

* igt@i915_selftest@live_execlists:
- fi-apl-guc: PASS -> INCOMPLETE [fdo#103927] / [fdo#109720]

* igt@kms_pipe_crc_basic@read-crc-pipe-a-frame-sequence:
- fi-byt-clapper: PASS -> FAIL [fdo#103191] / [fdo#107362]

* igt@runner@aborted:
- fi-apl-guc: NOTRUN -> FAIL [fdo#108622] / [fdo#109720]

#### Possible fixes ####

* igt@kms_pipe_crc_basic@hang-read-crc-pipe-b:
- fi-byt-clapper: FAIL [fdo#103191] / [fdo#107362] -> PASS

* igt@kms_pipe_crc_basic@read-crc-pipe-a:
- fi-byt-clapper: FAIL [fdo#107362] -> PASS

[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
[fdo#108622]: https://bugs.freedesktop.org/show_bug.cgi?id=108622
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109720]: https://bugs.freedesktop.org/show_bug.cgi?id=109720

Participating hosts (47 -> 41)
------------------------------

Additional (1): fi-kbl-r
Missing (7): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-bdw-samus

Build changes
-------------

* IGT: IGT_4924 -> IGTPW_2775

CI_DRM_5863: d2c849411d8ae6de9c718b9c0cd1e00da7f0f121 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2775: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2775/
IGT_4924: bcf2f21996b2ee5c6177f5412046690ff8017772 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2775/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#5 lore raw

Re: [igt-dev] ✗ Fi.CI.BAT: failure for Enabling PC8+ residency for all GEN9+ platforms (rev5)

Hi Imre ,

After adding the PC8 residency test to Fast Feedback list. I has passed on ICL but it fails on most of platforms. Shall we consider it as a known issues and proceed with the series. What is your opinion about it?

Thanks ,
Anshuman Gupta.

Quoted 133 lines · Patchwork

== Series Details ==

Series: Enabling PC8+ residency for all GEN9+ platforms (rev5)
URL : https://patchwork.freedesktop.org/series/57640/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_5863 -> IGTPW_2775
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_2775 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_2775, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

   External URL: https://patchwork.freedesktop.org/api/1.0/series/57640/revisions/5/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2775:

### IGT changes ###

#### Possible regressions ####

* igt@i915_pm_rpm@gem-execbuf-stress-pc8:
- fi-bxt-j4205: NOTRUN -> FAIL +2

* igt@i915_pm_rpm@modeset-pc8-residency-stress:

     - fi-kbl-8809g:       NOTRUN -> FAIL +2
     - fi-skl-6600u:       NOTRUN -> FAIL +2
     - fi-apl-guc:         NOTRUN -> FAIL +2

* igt@i915_pm_rpm@pc8-residency:

     - fi-cfl-8109u:       NOTRUN -> FAIL +2
     - fi-kbl-7567u:       NOTRUN -> FAIL +2
     - fi-whl-u:           NOTRUN -> FAIL +2

Known issues
------------

Here are the changes found in IGTPW_2775 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_exec_store@basic-bsd1:
- fi-kbl-r: NOTRUN -> SKIP [fdo#109271] +41

* igt@i915_pm_rpm@gem-execbuf-stress-pc8:

     - fi-bsw-kefka:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-bwr-2160:        NOTRUN -> SKIP [fdo#109271] +2
     - fi-gdg-551:         NOTRUN -> SKIP [fdo#109271] +2
     - fi-skl-6770hq:      NOTRUN -> SKIP [fdo#109271] +2
     - fi-kbl-guc:         NOTRUN -> SKIP [fdo#109271] +2
     - fi-byt-clapper:     NOTRUN -> SKIP [fdo#109271] +2
     - fi-skl-lmem:        NOTRUN -> SKIP [fdo#109271] +2
     - fi-byt-j1900:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-cfl-guc:         NOTRUN -> SKIP [fdo#109271] +2
     - fi-skl-guc:         NOTRUN -> SKIP [fdo#109271] +2
     - fi-hsw-4770r:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-skl-6700k2:      NOTRUN -> SKIP [fdo#109271] +2
     - fi-cfl-8700k:       NOTRUN -> SKIP [fdo#109271] +2

* igt@i915_pm_rpm@modeset-pc8-residency-stress:

     - fi-bdw-gvtdvm:      NOTRUN -> SKIP [fdo#109271] +2
     - fi-elk-e7500:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-ilk-650:         NOTRUN -> SKIP [fdo#109271] +2
     - fi-snb-2600:        NOTRUN -> SKIP [fdo#109271] +2
     - fi-skl-gvtdvm:      NOTRUN -> SKIP [fdo#109271] +2
     - fi-bdw-5557u:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-skl-iommu:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-ivb-3770:        NOTRUN -> SKIP [fdo#109271] +2
     - fi-bsw-n3050:       NOTRUN -> SKIP [fdo#109271] +2

* igt@i915_pm_rpm@pc8-residency:

     - fi-pnv-d510:        NOTRUN -> SKIP [fdo#109271] +2
     - fi-snb-2520m:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-byt-n2820:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-kbl-x1275:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-blb-e6850:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-hsw-4770:        NOTRUN -> SKIP [fdo#109271] +2

* igt@i915_selftest@live_execlists:
- fi-apl-guc: PASS -> INCOMPLETE [fdo#103927] / [fdo#109720]

* igt@kms_pipe_crc_basic@read-crc-pipe-a-frame-sequence:
- fi-byt-clapper: PASS -> FAIL [fdo#103191] / [fdo#107362]

* igt@runner@aborted:
- fi-apl-guc: NOTRUN -> FAIL [fdo#108622] / [fdo#109720]

#### Possible fixes ####

   * igt@kms_pipe_crc_basic@hang-read-crc-pipe-b:
     - fi-byt-clapper:     FAIL [fdo#103191] / [fdo#107362] -> PASS

   * igt@kms_pipe_crc_basic@read-crc-pipe-a:
     - fi-byt-clapper:     FAIL [fdo#107362] -> PASS

   
   [fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
   [fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
   [fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
   [fdo#108622]: https://bugs.freedesktop.org/show_bug.cgi?id=108622
   [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
   [fdo#109720]: https://bugs.freedesktop.org/show_bug.cgi?id=109720

Participating hosts (47 -> 41)
------------------------------

Additional (1): fi-kbl-r
Missing (7): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-bdw-samus

Build changes
-------------

* IGT: IGT_4924 -> IGTPW_2775

Quoted 8 lines
   CI_DRM_5863: d2c849411d8ae6de9c718b9c0cd1e00da7f0f121 @ git://anongit.freedesktop.org/gfx-ci/linux
   IGTPW_2775: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2775/
   IGT_4924: bcf2f21996b2ee5c6177f5412046690ff8017772 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2775/

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#6 lore raw

Re: [igt-dev] ✗ Fi.CI.BAT: failure for Enabling PC8+ residency for all GEN9+ platforms (rev5)

Quoted 6 lines · Anshuman

Hi Imre ,

After adding the PC8 residency test to Fast Feedback list. I has passed on ICL but it fails on most of platforms. Shall we consider it as a known issues and proceed with the series. What is your opinion about it?

If Imre is happy with the changes themselves, CI is happy with the results.

Wait for Martin's ack before merging (he needs to file the filters based on this run).

Martin, below is the one we discussed today.

Signature · 1 line
Petri Latvala
Quoted 137 lines

Thanks ,
Anshuman Gupta.

Quoted 133 lines · Patchwork

== Series Details ==

Series: Enabling PC8+ residency for all GEN9+ platforms (rev5)
URL : https://patchwork.freedesktop.org/series/57640/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_5863 -> IGTPW_2775
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_2775 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in IGTPW_2775, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

   External URL: https://patchwork.freedesktop.org/api/1.0/series/57640/revisions/5/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2775:

### IGT changes ###

#### Possible regressions ####

* igt@i915_pm_rpm@gem-execbuf-stress-pc8:
- fi-bxt-j4205: NOTRUN -> FAIL +2

* igt@i915_pm_rpm@modeset-pc8-residency-stress:

     - fi-kbl-8809g:       NOTRUN -> FAIL +2
     - fi-skl-6600u:       NOTRUN -> FAIL +2
     - fi-apl-guc:         NOTRUN -> FAIL +2

* igt@i915_pm_rpm@pc8-residency:

     - fi-cfl-8109u:       NOTRUN -> FAIL +2
     - fi-kbl-7567u:       NOTRUN -> FAIL +2
     - fi-whl-u:           NOTRUN -> FAIL +2

Known issues
------------

Here are the changes found in IGTPW_2775 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_exec_store@basic-bsd1:
- fi-kbl-r: NOTRUN -> SKIP [fdo#109271] +41

* igt@i915_pm_rpm@gem-execbuf-stress-pc8:

     - fi-bsw-kefka:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-bwr-2160:        NOTRUN -> SKIP [fdo#109271] +2
     - fi-gdg-551:         NOTRUN -> SKIP [fdo#109271] +2
     - fi-skl-6770hq:      NOTRUN -> SKIP [fdo#109271] +2
     - fi-kbl-guc:         NOTRUN -> SKIP [fdo#109271] +2
     - fi-byt-clapper:     NOTRUN -> SKIP [fdo#109271] +2
     - fi-skl-lmem:        NOTRUN -> SKIP [fdo#109271] +2
     - fi-byt-j1900:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-cfl-guc:         NOTRUN -> SKIP [fdo#109271] +2
     - fi-skl-guc:         NOTRUN -> SKIP [fdo#109271] +2
     - fi-hsw-4770r:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-skl-6700k2:      NOTRUN -> SKIP [fdo#109271] +2
     - fi-cfl-8700k:       NOTRUN -> SKIP [fdo#109271] +2

* igt@i915_pm_rpm@modeset-pc8-residency-stress:

     - fi-bdw-gvtdvm:      NOTRUN -> SKIP [fdo#109271] +2
     - fi-elk-e7500:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-ilk-650:         NOTRUN -> SKIP [fdo#109271] +2
     - fi-snb-2600:        NOTRUN -> SKIP [fdo#109271] +2
     - fi-skl-gvtdvm:      NOTRUN -> SKIP [fdo#109271] +2
     - fi-bdw-5557u:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-skl-iommu:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-ivb-3770:        NOTRUN -> SKIP [fdo#109271] +2
     - fi-bsw-n3050:       NOTRUN -> SKIP [fdo#109271] +2

* igt@i915_pm_rpm@pc8-residency:

     - fi-pnv-d510:        NOTRUN -> SKIP [fdo#109271] +2
     - fi-snb-2520m:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-byt-n2820:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-kbl-x1275:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-blb-e6850:       NOTRUN -> SKIP [fdo#109271] +2
     - fi-hsw-4770:        NOTRUN -> SKIP [fdo#109271] +2

* igt@i915_selftest@live_execlists:
- fi-apl-guc: PASS -> INCOMPLETE [fdo#103927] / [fdo#109720]

* igt@kms_pipe_crc_basic@read-crc-pipe-a-frame-sequence:
- fi-byt-clapper: PASS -> FAIL [fdo#103191] / [fdo#107362]

* igt@runner@aborted:
- fi-apl-guc: NOTRUN -> FAIL [fdo#108622] / [fdo#109720]

#### Possible fixes ####

   * igt@kms_pipe_crc_basic@hang-read-crc-pipe-b:
     - fi-byt-clapper:     FAIL [fdo#103191] / [fdo#107362] -> PASS

   * igt@kms_pipe_crc_basic@read-crc-pipe-a:
     - fi-byt-clapper:     FAIL [fdo#107362] -> PASS

   [fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
   [fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
   [fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
   [fdo#108622]: https://bugs.freedesktop.org/show_bug.cgi?id=108622
   [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
   [fdo#109720]: https://bugs.freedesktop.org/show_bug.cgi?id=109720

Participating hosts (47 -> 41)
------------------------------

Additional (1): fi-kbl-r
Missing (7): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-bdw-samus

Build changes
-------------

* IGT: IGT_4924 -> IGTPW_2775

   CI_DRM_5863: d2c849411d8ae6de9c718b9c0cd1e00da7f0f121 @ git://anongit.freedesktop.org/gfx-ci/linux
   IGTPW_2775: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2775/
   IGT_4924: bcf2f21996b2ee5c6177f5412046690ff8017772 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Quoted 8 lines
Quoted 4 lines

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2775/

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev