Skip to contentSkip to conversation

pinctrl: imx8mq: Add suspend/resume ops

PATCH In review Abel Vesa 3 participants 3 messages Apr 8, 2019 – Apr 11, 2019

Subsystems (4)
lore
Share & tools
lore

Abel Vesa

author
#0 lore raw

PATCH v3 1/1 pinctrl: imx8mq: Add suspend/resume ops

To support pinctl hog restore after LPSR resume back, add the generic suspend/resume in pinctrl-imx along with the generic pm ops to be used by platform specific drivers. Then make use of the newly added ops in i.MX8MQ platform specific driver.

---

Changes since v2:
* removed the pinctrl-imx8mq with imx8mq in the subject
* added static and __maybe_unused to both suspend and resume
* removed the useless null checks

 drivers/pinctrl/freescale/pinctrl-imx.c    | 19 +++++++++++++++++++
 drivers/pinctrl/freescale/pinctrl-imx.h    |  1 +
 drivers/pinctrl/freescale/pinctrl-imx8mq.c |  1 +
 3 files changed, 21 insertions(+)
drivers/pinctrl/freescale/pinctrl-imx.c +19 -0
index 188001b..93a86d2 100644
@@ -887,3 +887,22 @@ int imx_pinctrl_probe(struct platform_device *pdev,
 
 	return ret;
 }
+
+static int __maybe_unused imx_pinctrl_suspend(struct device *dev)
+{
+	struct imx_pinctrl *ipctl = dev_get_drvdata(dev);
+
+	return pinctrl_force_sleep(ipctl->pctl);
+}
+
+static int __maybe_unused imx_pinctrl_resume(struct device *dev)
+{
+	struct imx_pinctrl *ipctl = dev_get_drvdata(dev);
+
+	return pinctrl_force_default(ipctl->pctl);
+}
+
+const struct dev_pm_ops imx_pinctrl_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(imx_pinctrl_suspend,
+					imx_pinctrl_resume)
+};
drivers/pinctrl/freescale/pinctrl-imx.h +1 -0
index 98a4889..333d32b 100644
@@ -17,6 +17,7 @@
 struct platform_device;
 
 extern struct pinmux_ops imx_pmx_ops;
+extern const struct dev_pm_ops imx_pinctrl_pm_ops;
 
 /**
  * struct imx_pin_mmio - MMIO pin configurations
drivers/pinctrl/freescale/pinctrl-imx8mq.c +1 -0
index 8d39af5..50aa1c0 100644
@@ -339,6 +339,7 @@ static struct platform_driver imx8mq_pinctrl_driver = {
 	.driver = {
 		.name = "imx8mq-pinctrl",
 		.of_match_table = of_match_ptr(imx8mq_pinctrl_of_match),
+		.pm = &imx_pinctrl_pm_ops,
 		.suppress_bind_attrs = true,
 	},
 	.probe = imx8mq_pinctrl_probe,
Signature · 1 line
2.7.4
maintainer Acked-by on v3 1/1
#1 lore raw
Quoted 10 lines

From: Abel Vesa
Sent: Tuesday, April 9, 2019 2:39 AM

To support pinctl hog restore after LPSR resume back, add the generic suspend/resume in pinctrl-imx along with the generic pm ops to be used by platform specific drivers. Then make use of the newly added ops in i.MX8MQ platform specific driver.

Regards
Dong Aisheng