iw: Add new command to support tid specific configuration
PATCH 1/1 iw: Add new command to support tid specific configuration
Add "set tid_config" command to support tid specific configurations. This command accepts multiple tid configurations
like retry, ampdu, rtscts, noack and tx bitrate at a time.
Format:
iw dev <interface> set tid_config <configuration>
Example:
Noack configuration :
iw <interface> set tid_config tid <tid_number> peer <MAC_addr> noack enable|disable
Retry count :
iw <interface> set tid_config tid <tid_number> peer <MAC_addr> retry_count long <retry_value>
Aggregation :
iw <interface> set tid_config tid <tid_number> peer <MAC_addr> ampdu enable|disable
RTSCTS configuration :
iw <interface> set tid_config tid <tid_number> peer <MAC_addr> rtscts enable|disable
Bitrates configuration :
iw <interface> set tid_config tid <tid_number> peer <MAC_addr> bitrates <[auto] [fixed] [limit]> [legacy-<2.4|5> <legacy rate in Mbps>*] [ht-mcs-<2.4|5> <MCS index>] [vht-mcs-<2.4|5> <NSS:MCSx]]
--- Makefile | 2 +- bitrate.c | 40 +++++++++-- iw.h | 3 + tid_config.c | 230 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 267 insertions(+), 8 deletions(-) create mode 100644 tid_config.c
Makefile +1 -1
@@ -24,7 +24,7 @@ OBJS = iw.o genl.o event.o info.o phy.o \ reason.o status.o connect.o link.o offch.o ps.o cqm.o \ bitrate.o wowlan.o coalesce.o roc.o p2p.o vendor.o mgmt.o \ ap.o sha256.o nan.o bloom.o \ - measurements.o ftm.o + measurements.o ftm.o tid_config.o OBJS += sections.o OBJS-$(HWSIM) += hwsim.o
bitrate.c +33 -7
@@ -76,10 +76,9 @@ static int setup_vht(struct nl80211_txrate_vht *txrate_vht,#define VHT_ARGC_MAX 100 -static int handle_bitrates (struct nl80211_state *state, -struct nl_msg *msg, -int argc,char **argv, -enum id_input id) +int set_bitrates (struct nl_msg *msg, +int argc,char **argv, +int arg_idx,enum nl80211_attrs attr) {struct nlattr *nl_rates, *nl_band;int i;
@@ -110,7 +109,7 @@ static int handle_bitrates(struct nl80211_state *state,S_GI , } parser_state = S_NONE; -for (i =0 ; i < argc; i++) { +for (i = arg_idx; i < argc; i++) {char *end;double tmpd;long tmpl;
@@ -195,10 +194,14 @@ static int handle_bitrates(struct nl80211_state *state,case S_GI :break ;default : +if (attr !=NL80211_ATTR_TX_RATES ) + goto next; +return 1 ; } } +next:if (have_vht_mcs_24)if (!setup_vht (&txrate_vht_24, vht_argc_24, vht_argv_24))return -EINVAL ;
@@ -213,7 +216,7 @@ static int handle_bitrates(struct nl80211_state *state,if (sgi_24 && lgi_24)return 1 ; - nl_rates =nla_nest_start (msg,NL80211_ATTR_TX_RATES ); + nl_rates =nla_nest_start (msg, attr);if (!nl_rates) goto nla_put_failure;
@@ -253,11 +256,34 @@ static int handle_bitrates(struct nl80211_state *state,nla_nest_end (msg, nl_rates); -return 0 ; +return i; nla_put_failure:return -ENOBUFS ; } +static int handle_bitrates (struct nl80211_state *state, +struct nl_msg *msg, +int argc,char **argv, +enum id_input id) +{ +int ret; +struct nl_msg *rate; + + rate =nlmsg_alloc (); +if (!rate) { + ret = -ENOMEM ; + goto nla_put_failure; + } + + ret =set_bitrates (rate, argc, argv,0 ,NL80211_ATTR_TX_RATES ); +if (ret < argc) +return 1 ; + +return 0 ; +nla_put_failure: +return -ENOBUFS ; +} +#define DESCR_LEGACY "[legacy-<2.4|5> <legacy rate in Mbps>*]"#define DESCR DESCR_LEGACY " [ht-mcs-<2.4|5> <MCS index>*] [vht-mcs-<2.4|5> <NSS:MCSx,MCSy... | NSS:MCSx-MCSy>*] [sgi-2.4|lgi-2.4] [sgi-5|lgi-5]"
iw.h +3 -0
@@ -242,4 +242,7 @@ void nan_bf(uint8_t idx, uint8_t *bf, uint16_t bf_len, const uint8_t *buf,char *hex2bin (const char *hex,char *buf); +int set_bitrates (struct nl_msg *msg,int argc,char **argv,int arg_idx, +enum nl80211_attrs attr); +#endif /* __IW_H */
tid_config.c new file +230 -0
230 lines not on this page · raw message
Signature · 1 line
1.9.1