Skip to contentSkip to conversation

app/test/ipsec: fix logic around dequeue burst

PATCH Superseded Bernard Iremonger 3 participants 5 messages Apr 11, 2019 – Apr 12, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 app/test/ipsec: fix logic around dequeue burst

Call rte_crypto_dequeue_burst() in a loop with a delay to ensure that all the packets are dequeued from the crtpto device.

Fixes 59d7353b0df0 ("test/ipsec: fix test suite setup")
---
 app/test/test_ipsec.c | 42 +++++++++++++++++++++++++++++++-----------
 1 file changed, 31 insertions(+), 11 deletions(-)
app/test/test_ipsec.c +31 -11
index 80a2d25..25a7df4 100644
@@ -9,7 +9,7 @@
 #include <rte_mbuf.h>
 #include <rte_malloc.h>
 #include <rte_memcpy.h>
-#include <rte_pause.h>
+#include <rte_cycles.h>
 #include <rte_bus_vdev.h>
 #include <rte_ip.h>
 
@@ -42,6 +42,7 @@
 #define OUTBOUND_SPI	17
 #define BURST_SIZE		32
 #define REORDER_PKTS	1
+#define DEQUEUE_COUNT	1000
 
 struct user_params {
 	enum rte_crypto_sym_xform_type auth;
@@ -758,7 +759,9 @@ crypto_ipsec(uint16_t num_pkts)
 	struct ipsec_testsuite_params *ts_params = &testsuite_params;
 	struct ipsec_unitest_params *ut_params = &unittest_params;
 	uint32_t k, ng;
+	uint32_t pkt_cnt;
 	struct rte_ipsec_group grp[1];
+	int i;
 
 	/* call crypto prepare */
 	k = rte_ipsec_pkt_crypto_prepare(&ut_params->ss[0], ut_params->ibuf,
@@ -774,9 +777,15 @@ crypto_ipsec(uint16_t num_pkts)
 		return TEST_FAILED;
 	}
 
-	k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
-		ut_params->cop, num_pkts);
-	if (k != num_pkts) {
+	for (i = 0, pkt_cnt = 0;
+		i < DEQUEUE_COUNT && pkt_cnt != num_pkts; i++) {
+		k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
+				&ut_params->cop[pkt_cnt], num_pkts - pkt_cnt);
+		pkt_cnt += k;
+		rte_delay_us(1);
+	}
+
+	if (pkt_cnt != num_pkts) {
 		RTE_LOG(ERR, USER1, "rte_cryptodev_dequeue_burst fail\n");
 		return TEST_FAILED;
 	}
@@ -868,7 +877,7 @@ crypto_ipsec_2sa(void)
 	struct ipsec_testsuite_params *ts_params = &testsuite_params;
 	struct ipsec_unitest_params *ut_params = &unittest_params;
 	struct rte_ipsec_group grp[BURST_SIZE];
-
+	uint32_t pkt_cnt;
 	uint32_t k, ng, i, r;
 
 	for (i = 0; i < BURST_SIZE; i++) {
@@ -890,9 +899,14 @@ crypto_ipsec_2sa(void)
 		}
 	}
 
-	k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
-		ut_params->cop, BURST_SIZE);
-	if (k != BURST_SIZE) {
+	for (i = 0, k = 0, pkt_cnt = 0;
+		i < DEQUEUE_COUNT && pkt_cnt != BURST_SIZE; i++) {
+		k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
+				&ut_params->cop[pkt_cnt], BURST_SIZE - pkt_cnt);
+		pkt_cnt += k;
+		rte_delay_us(1);
+	}
+	if (pkt_cnt != BURST_SIZE) {
 		RTE_LOG(ERR, USER1, "rte_cryptodev_dequeue_burst fail\n");
 		return TEST_FAILED;
 	}
@@ -1007,6 +1021,7 @@ crypto_ipsec_2sa_4grp(void)
 	struct ipsec_unitest_params *ut_params = &unittest_params;
 	struct rte_ipsec_group grp[BURST_SIZE];
 	uint32_t k, ng, i, j;
+	uint32_t pkt_cnt;
 	uint32_t rc = 0;
 
 	for (i = 0; i < BURST_SIZE; i++) {
@@ -1029,9 +1044,14 @@ crypto_ipsec_2sa_4grp(void)
 		}
 	}
 
-	k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
-		ut_params->cop, BURST_SIZE);
-	if (k != BURST_SIZE) {
+	for (i = 0, k = 0, pkt_cnt = 0;
+		i < DEQUEUE_COUNT && pkt_cnt != BURST_SIZE; i++) {
+		k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
+				&ut_params->cop[pkt_cnt], BURST_SIZE - pkt_cnt);
+		pkt_cnt += k;
+		rte_delay_us(1);
+	}
+	if (pkt_cnt != BURST_SIZE) {
 		RTE_LOG(ERR, USER1, "rte_cryptodev_dequeue_burst fail\n");
 		return TEST_FAILED;
 	}
Signature · 1 line
2.7.4
Acked-by on v1 1/1
#1 lore raw
Quoted 9 lines

-----Original Message-----
From: dev [mailto:[email protected]] On Behalf Of Bernard Iremonger
Sent: Thursday, April 11, 2019 2:08 PM
To: [email protected]; Ananyev, Konstantin <[email protected]>; [email protected]
Cc: Iremonger, Bernard <[email protected]>; [email protected]
Subject: [dpdk-dev] [PATCH] app/test/ipsec: fix logic around dequeue burst

Quoted 7 lines

Call rte_crypto_dequeue_burst() in a loop with a delay to ensure that all the packets are dequeued from the crtpto device.

Fixes 59d7353b0df0 ("test/ipsec: fix test suite setup")
Acked-by on v1 1/1
#2 lore raw
In reply to Bernard Iremonger

Hi Bernard,

/ipsec: fix logic around dequeue burst

Quoted 47 lines

Call rte_crypto_dequeue_burst() in a loop with a delay to ensure that all the packets are dequeued from the crtpto device.

Fixes 59d7353b0df0 ("test/ipsec: fix test suite setup")
---
 app/test/test_ipsec.c | 42 +++++++++++++++++++++++++++++++-----------
 1 file changed, 31 insertions(+), 11 deletions(-)
app/test/test_ipsec.c +4 -1
index 80a2d25..25a7df4 100644
@@ -9,7 +9,7 @@
 #include <rte_mbuf.h>
 #include <rte_malloc.h>
 #include <rte_memcpy.h>
-#include <rte_pause.h>
+#include <rte_cycles.h>
 #include <rte_bus_vdev.h>
 #include <rte_ip.h>
 
@@ -42,6 +42,7 @@
 #define OUTBOUND_SPI	17
 #define BURST_SIZE		32
 #define REORDER_PKTS	1
+#define DEQUEUE_COUNT	1000
 
 struct user_params {
 	enum rte_crypto_sym_xform_type auth;
@@ -758,7 +759,9 @@ crypto_ipsec(uint16_t num_pkts)
 	struct ipsec_testsuite_params *ts_params = &testsuite_params;
 	struct ipsec_unitest_params *ut_params = &unittest_params;
 	uint32_t k, ng;
+	uint32_t pkt_cnt;
 	struct rte_ipsec_group grp[1];
+	int i;
 
 	/* call crypto prepare */
 	k = rte_ipsec_pkt_crypto_prepare(&ut_params->ss[0], ut_params->ibuf,
@@ -774,9 +777,15 @@ crypto_ipsec(uint16_t num_pkts)
 		return TEST_FAILED;
 	}
 

app/test/test_ipsec.c crypto_ipsec(uint16_t num_pkts) · line 786

Quoted 10 lines
app/test/test_ipsec.c +7 -3
-	k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
-		ut_params->cop, num_pkts);
-	if (k != num_pkts) {
+	for (i = 0, pkt_cnt = 0;
+		i < DEQUEUE_COUNT && pkt_cnt != num_pkts; i++) {
+		k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
+				&ut_params->cop[pkt_cnt], num_pkts - pkt_cnt);
+		pkt_cnt += k;
+		rte_delay_us(1);
+	}

Looks good to me.
My only suggestion would be to put that loop in a separate function to avoid duplications.
Apart from that:

Quoted 60 lines
app/test/test_ipsec.c +20 -8
+
+	if (pkt_cnt != num_pkts) {
 		RTE_LOG(ERR, USER1, "rte_cryptodev_dequeue_burst fail\n");
 		return TEST_FAILED;
 	}
@@ -868,7 +877,7 @@ crypto_ipsec_2sa(void)
 	struct ipsec_testsuite_params *ts_params = &testsuite_params;
 	struct ipsec_unitest_params *ut_params = &unittest_params;
 	struct rte_ipsec_group grp[BURST_SIZE];
-
+	uint32_t pkt_cnt;
 	uint32_t k, ng, i, r;
 
 	for (i = 0; i < BURST_SIZE; i++) {
@@ -890,9 +899,14 @@ crypto_ipsec_2sa(void)
 		}
 	}
 
-	k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
-		ut_params->cop, BURST_SIZE);
-	if (k != BURST_SIZE) {
+	for (i = 0, k = 0, pkt_cnt = 0;
+		i < DEQUEUE_COUNT && pkt_cnt != BURST_SIZE; i++) {
+		k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
+				&ut_params->cop[pkt_cnt], BURST_SIZE - pkt_cnt);
+		pkt_cnt += k;
+		rte_delay_us(1);
+	}
+	if (pkt_cnt != BURST_SIZE) {
 		RTE_LOG(ERR, USER1, "rte_cryptodev_dequeue_burst fail\n");
 		return TEST_FAILED;
 	}
@@ -1007,6 +1021,7 @@ crypto_ipsec_2sa_4grp(void)
 	struct ipsec_unitest_params *ut_params = &unittest_params;
 	struct rte_ipsec_group grp[BURST_SIZE];
 	uint32_t k, ng, i, j;
+	uint32_t pkt_cnt;
 	uint32_t rc = 0;
 
 	for (i = 0; i < BURST_SIZE; i++) {
@@ -1029,9 +1044,14 @@ crypto_ipsec_2sa_4grp(void)
 		}
 	}
 
-	k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
-		ut_params->cop, BURST_SIZE);
-	if (k != BURST_SIZE) {
+	for (i = 0, k = 0, pkt_cnt = 0;
+		i < DEQUEUE_COUNT && pkt_cnt != BURST_SIZE; i++) {
+		k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
+				&ut_params->cop[pkt_cnt], BURST_SIZE - pkt_cnt);
+		pkt_cnt += k;
+		rte_delay_us(1);
+	}
+	if (pkt_cnt != BURST_SIZE) {
 		RTE_LOG(ERR, USER1, "rte_cryptodev_dequeue_burst fail\n");
 		return TEST_FAILED;
 	}
--

2.7.4

#3 lore raw

Hi Konstantin,

<snip>

Quoted 61 lines
Quoted 42 lines

Call rte_crypto_dequeue_burst() in a loop with a delay to ensure that all the packets are dequeued from the crtpto device.

Fixes 59d7353b0df0 ("test/ipsec: fix test suite setup")
---
 app/test/test_ipsec.c | 42 +++++++++++++++++++++++++++++++-----------
 1 file changed, 31 insertions(+), 11 deletions(-)
app/test/test_ipsec.c index renamed from app/test/test_ipsec.c +0 -0

80a2d25..25a7df4 100644

app/test/test_ipsec.c +2 -1
@@ -9,7 +9,7 @@
 #include <rte_mbuf.h>
 #include <rte_malloc.h>
 #include <rte_memcpy.h>
-#include <rte_pause.h>
+#include <rte_cycles.h>
 #include <rte_bus_vdev.h>
 #include <rte_ip.h>
 
@@ -42,6 +42,7 @@
 #define OUTBOUND_SPI	17
 #define BURST_SIZE		32
 #define REORDER_PKTS	1
+#define DEQUEUE_COUNT	1000
 
 struct user_params {
 	enum rte_crypto_sym_xform_type auth; @@ -758,7 +759,9 @@

crypto_ipsec(uint16_t num_pkts)

app/test/test_ipsec.c +2 -0
 	struct ipsec_testsuite_params *ts_params = &testsuite_params;
 	struct ipsec_unitest_params *ut_params = &unittest_params;
 	uint32_t k, ng;
+	uint32_t pkt_cnt;
 	struct rte_ipsec_group grp[1];
+	int i;
 
 	/* call crypto prepare */
 	k = rte_ipsec_pkt_crypto_prepare(&ut_params->ss[0], ut_params->ibuf,

app/test/test_ipsec.c crypto_ipsec(uint16_t num_pkts) · line 783

Quoted 10 lines
app/test/test_ipsec.c +4 -3
@@ -774,9 +777,15 @@ crypto_ipsec(uint16_t num_pkts)
 		return TEST_FAILED;
 	}
 
-	k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
-		ut_params->cop, num_pkts);
-	if (k != num_pkts) {
+	for (i = 0, pkt_cnt = 0;
+		i < DEQUEUE_COUNT && pkt_cnt != num_pkts; i++) {
+		k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
+				&ut_params->cop[pkt_cnt], num_pkts -

pkt_cnt);

app/test/test_ipsec.c crypto_ipsec(uint16_t num_pkts) · line 786

Quoted 3 lines
app/test/test_ipsec.c +3 -0
+		pkt_cnt += k;
+		rte_delay_us(1);
+	}

Looks good to me.
My only suggestion would be to put that loop in a separate function to avoid duplications.
Apart from that:

Quoted 1 line

I will put that loop in a separate function and send v2

Regards,

Bernard.

snip

#4 lore raw

PATCH v2 1/1 app/test/ipsec: fix logic around dequeue burst

In reply to Bernard Iremonger

Added crypto_dequeue_burst() function to call
rte_crypto_dequeue_burst() in a loop with a
delay to ensure that all the packets are
dequeued from the crtpto device.

Fixes 59d7353b0df0 ("test/ipsec: fix test suite setup")

---
Changes in v2:
Added crypto_dequeue_burst() function

 app/test/test_ipsec.c | 46 +++++++++++++++++++++++++++++-----------------
 1 file changed, 29 insertions(+), 17 deletions(-)
app/test/test_ipsec.c +29 -17
index 80a2d25..d79fe11 100644
@@ -9,7 +9,7 @@
 #include <rte_mbuf.h>
 #include <rte_malloc.h>
 #include <rte_memcpy.h>
-#include <rte_pause.h>
+#include <rte_cycles.h>
 #include <rte_bus_vdev.h>
 #include <rte_ip.h>
 
@@ -42,6 +42,7 @@
 #define OUTBOUND_SPI	17
 #define BURST_SIZE		32
 #define REORDER_PKTS	1
+#define DEQUEUE_COUNT	1000
 
 struct user_params {
 	enum rte_crypto_sym_xform_type auth;
@@ -753,6 +754,29 @@ create_sa(enum rte_security_session_action_type action_type,
 }
 
 static int
+crypto_dequeue_burst(uint16_t num_pkts)
+{
+	struct ipsec_testsuite_params *ts_params = &testsuite_params;
+	struct ipsec_unitest_params *ut_params = &unittest_params;
+	uint32_t pkt_cnt, k;
+	int i;
+
+	for (i = 0, pkt_cnt = 0;
+		i < DEQUEUE_COUNT && pkt_cnt != num_pkts; i++) {
+		k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
+			&ut_params->cop[pkt_cnt], num_pkts - pkt_cnt);
+		pkt_cnt += k;
+		rte_delay_us(1);
+	}
+
+	if (pkt_cnt != num_pkts) {
+		RTE_LOG(ERR, USER1, "rte_cryptodev_dequeue_burst fail\n");
+		return TEST_FAILED;
+	}
+	return TEST_SUCCESS;
+}
+
+static int
 crypto_ipsec(uint16_t num_pkts)
 {
 	struct ipsec_testsuite_params *ts_params = &testsuite_params;
@@ -767,6 +791,7 @@ crypto_ipsec(uint16_t num_pkts)
 		RTE_LOG(ERR, USER1, "rte_ipsec_pkt_crypto_prepare fail\n");
 		return TEST_FAILED;
 	}
+
 	k = rte_cryptodev_enqueue_burst(ts_params->valid_dev, 0,
 		ut_params->cop, num_pkts);
 	if (k != num_pkts) {
@@ -774,12 +799,8 @@ crypto_ipsec(uint16_t num_pkts)
 		return TEST_FAILED;
 	}
 
-	k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
-		ut_params->cop, num_pkts);
-	if (k != num_pkts) {
-		RTE_LOG(ERR, USER1, "rte_cryptodev_dequeue_burst fail\n");
+	if (crypto_dequeue_burst(num_pkts) == TEST_FAILED)
 		return TEST_FAILED;
-	}
 
 	ng = rte_ipsec_pkt_crypto_group(
 		(const struct rte_crypto_op **)(uintptr_t)ut_params->cop,
@@ -868,7 +889,6 @@ crypto_ipsec_2sa(void)
 	struct ipsec_testsuite_params *ts_params = &testsuite_params;
 	struct ipsec_unitest_params *ut_params = &unittest_params;
 	struct rte_ipsec_group grp[BURST_SIZE];
-
 	uint32_t k, ng, i, r;
 
 	for (i = 0; i < BURST_SIZE; i++) {
@@ -890,12 +910,8 @@ crypto_ipsec_2sa(void)
 		}
 	}
 
-	k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
-		ut_params->cop, BURST_SIZE);
-	if (k != BURST_SIZE) {
-		RTE_LOG(ERR, USER1, "rte_cryptodev_dequeue_burst fail\n");
+	if (crypto_dequeue_burst(BURST_SIZE) == TEST_FAILED)
 		return TEST_FAILED;
-	}
 
 	ng = rte_ipsec_pkt_crypto_group(
 		(const struct rte_crypto_op **)(uintptr_t)ut_params->cop,
@@ -1029,12 +1045,8 @@ crypto_ipsec_2sa_4grp(void)
 		}
 	}
 
-	k = rte_cryptodev_dequeue_burst(ts_params->valid_dev, 0,
-		ut_params->cop, BURST_SIZE);
-	if (k != BURST_SIZE) {
-		RTE_LOG(ERR, USER1, "rte_cryptodev_dequeue_burst fail\n");
+	if (crypto_dequeue_burst(BURST_SIZE) == TEST_FAILED)
 		return TEST_FAILED;
-	}
 
 	ng = rte_ipsec_pkt_crypto_group(
 		(const struct rte_crypto_op **)(uintptr_t)ut_params->cop,
Signature · 1 line
2.7.4