board: atmel: add SAMA5D2 ICP board
PATCH v3 1/1 board: atmel: add SAMA5D2 ICP board
From: Eugen Hristev <[email protected]>
The SAMA5D2 ICP Board features the SAMA5D27 SoC, together with QSPI Flash, Wilc3000 wireless device and EtherCat support.
---
Changes in v3:
- Added CONFIG_SPL_RAM_DEVICE=y to fix build warning
Changes in v2:
- created at91-sama5d2_icp-u-boot.dtsi with the pre-reloc properties
- removed some #ifdef as suggested by Stefan
- fixed issue with wrong SPL FAT FS in defconfig
- fixed build issue with wrong DRAM_BANKS redefine
arch/arm/dts/Makefile | 3 + arch/arm/dts/at91-sama5d2_icp-u-boot.dtsi | 30 +++++ arch/arm/dts/at91-sama5d2_icp.dts | 95 +++++++++++++++ arch/arm/mach-at91/Kconfig | 12 ++ board/atmel/sama5d2_icp/Kconfig | 15 +++ board/atmel/sama5d2_icp/MAINTAINERS | 7 ++ board/atmel/sama5d2_icp/Makefile | 7 ++ board/atmel/sama5d2_icp/sama5d2_icp.c | 191 ++++++++++++++++++++++++++++++ configs/sama5d2_icp_mmc_defconfig | 74 ++++++++++++ include/configs/sama5d2_icp.h | 69 +++++++++++ 10 files changed, 503 insertions(+) create mode 100644 arch/arm/dts/at91-sama5d2_icp-u-boot.dtsi create mode 100644 arch/arm/dts/at91-sama5d2_icp.dts create mode 100644 board/atmel/sama5d2_icp/Kconfig create mode 100644 board/atmel/sama5d2_icp/MAINTAINERS create mode 100644 board/atmel/sama5d2_icp/Makefile create mode 100644 board/atmel/sama5d2_icp/sama5d2_icp.c create mode 100644 configs/sama5d2_icp_mmc_defconfig create mode 100644 include/configs/sama5d2_icp.h
arch/arm/dts/Makefile +3 -0
@@ -643,6 +643,9 @@ dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \ dtb-$(CONFIG_TARGET_SAMA5D27_SOM1_EK) += \ at91-sama5d27_som1_ek.dtb +dtb-$(CONFIG_TARGET_SAMA5D2_ICP) += \ + at91-sama5d2_icp.dtb + dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \ sama5d31ek.dtb \ sama5d33ek.dtb \
arch/arm/dts/at91-sama5d2_icp-u-boot.dtsi new file +30 -0
@@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * at91-sama5d2_icp-for-uboot.dtsi - Device Tree file for SAMA5D2 ICP board + * SAMA5D2 Industrial Connectivity Platform + * + * Copyright (c) 2019, Microchip Technology Inc. and its subsidiaries + * 2019, Eugen Hristev <[email protected]> + */ + +/ { + chosen { + u-boot,dm-pre-reloc; + }; +}; + +&sdmmc0 { + u-boot,dm-pre-reloc; +}; + +&uart0 { /* mikrobus1 uart */ + u-boot,dm-pre-reloc; +}; + +&pinctrl_sdmmc0_default { + u-boot,dm-pre-reloc; +}; + +&pinctrl_mikrobus1_uart { + u-boot,dm-pre-reloc; +};
arch/arm/dts/at91-sama5d2_icp.dts new file +95 -0
95 lines not on this page · raw message
arch/arm/mach-at91/Kconfig +12 -0
@@ -180,6 +180,17 @@ config TARGET_SAMA5D27_SOM1_EK processor-based SAMA5D2 MPU with up to 1 Gbit DDR2-SDRAM in a single package. +config TARGET_SAMA5D2_ICP + bool "SAMA5D2 Industrial Connectivity Platform (ICP)" + select CPU_V7A + select SUPPORT_SPL + select BOARD_EARLY_INIT_F + select BOARD_LATE_INIT + help + The SAMA5D2 ICP embeds SAMA5D27 rev. C SoC, together with + a 64Mbit QSPI flash, 3xMikrobus connectors, 4xUSB , + EtherCat and WILC3000 devices on board. + config TARGET_SAMA5D3_XPLAINED bool "SAMA5D3 Xplained board" select BOARD_EARLY_INIT_F
@@ -281,6 +292,7 @@ source "board/atmel/at91sam9x5ek/Kconfig" source "board/atmel/sama5d2_ptc_ek/Kconfig" source "board/atmel/sama5d2_xplained/Kconfig" source "board/atmel/sama5d27_som1_ek/Kconfig" +source "board/atmel/sama5d2_icp/Kconfig" source "board/atmel/sama5d3_xplained/Kconfig" source "board/atmel/sama5d3xek/Kconfig" source "board/atmel/sama5d4_xplained/Kconfig"
board/atmel/sama5d2_icp/Kconfig new file +15 -0
@@ -0,0 +1,15 @@ +if TARGET_SAMA5D2_ICP + +config SYS_BOARD + default "sama5d2_icp" + +config SYS_VENDOR + default "atmel" + +config SYS_SOC + default "at91" + +config SYS_CONFIG_NAME + default "sama5d2_icp" + +endif
board/atmel/sama5d2_icp/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +SAMA5D2 ICP BOARD +M: Eugen Hristev <[email protected]> +S: Maintained +F: board/atmel/sama5d2_icp/ +F: include/configs/sama5d2_icp.h +F: configs/sama5d2_icp_mmc_defconfig +
board/atmel/sama5d2_icp/Makefile new file +7 -0
@@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2018 Microchip Technology Inc. +# Eugen Hristev <[email protected]> +# + +obj-y += sama5d2_icp.o
board/atmel/sama5d2_icp/sama5d2_icp.c new file +191 -0
191 lines not on this page · raw message
configs/sama5d2_icp_mmc_defconfig new file +74 -0
74 lines not on this page · raw message
include/configs/sama5d2_icp.h new file +69 -0
69 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v3 1/1 board: atmel: add SAMA5D2 ICP board
Quoted 11 lines · On 12.04.2019 09:48, Eugen Hristev - M18282 wrote:
From: Eugen Hristev <[email protected]>
The SAMA5D2 ICP Board features the SAMA5D27 SoC, together with QSPI Flash, Wilc3000 wireless device and EtherCat support.
Signed-off-by Eugen Hristev <[email protected]>---
Changes in v3:
- AddedCONFIG_SPL_RAM_DEVICE=yto fix build warning
Quoted 6 lines
Changes in v2:
- createdat91-sama5d2_icp-u-boot.dtsiwith the pre-reloc properties
- removed some #ifdef as suggested by Stefan
- fixed issue with wrong SPL FAT FS in defconfig
- fixed build issue with wrongDRAM_BANKSredefine
Applied to u-boot-atmel/master