Skip to contentSkip to conversation

hwmon (occ): Store error condition for rate-limited polls

PATCH In review Eddie James 2 participants 4 messages Apr 15, 2019 – Apr 16, 2019 Hardware monitoring

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 hwmon (occ): Store error condition for rate-limited polls

The OCC driver limits the rate of sending poll commands to the OCC. If a user reads a hwmon entry after a poll response resulted in an error and is rate-limited, the error is invisible to the user. Fix this by storing the last error and returning that in the rate-limited case.

---
 drivers/hwmon/occ/common.c | 4 ++++
 drivers/hwmon/occ/common.h | 3 ++-
 2 files changed, 6 insertions(+), 1 deletion(-)
drivers/hwmon/occ/common.c +4 -0
index c888f4a..0e812ef 100644
@@ -138,6 +138,7 @@ static int occ_poll(struct occ *occ)
 	/* mutex should already be locked if necessary */
 	rc = occ->send_cmd(occ, cmd);
 	if (rc) {
+		occ->last_error = rc;
 		if (occ->error_count++ > OCC_ERROR_COUNT_THRESHOLD)
 			occ->error = rc;
 
@@ -146,6 +147,7 @@ static int occ_poll(struct occ *occ)
 
 	/* clear error since communication was successful */
 	occ->error_count = 0;
+	occ->last_error = 0;
 	occ->error = 0;
 
 	/* check for safe state */
@@ -207,6 +209,8 @@ int occ_update_response(struct occ *occ)
 	if (time_after(jiffies, occ->last_update + OCC_UPDATE_FREQUENCY)) {
 		rc = occ_poll(occ);
 		occ->last_update = jiffies;
+	} else {
+		rc = occ->last_error;
 	}
 
 	mutex_unlock(&occ->lock);
drivers/hwmon/occ/common.h +2 -1
index 7c44df3..c676e48 100644
@@ -105,7 +105,8 @@ struct occ {
 	struct attribute_group group;
 	const struct attribute_group *groups[2];
 
-	int error;                      /* latest transfer error */
+	int error;                      /* final transfer error after retry */
+	int last_error;			/* latest transfer error */
 	unsigned int error_count;       /* number of xfr errors observed */
 	unsigned long last_safe;        /* time OCC entered "safe" state */
 
Signature · 1 line
2.7.4
#1 lore raw

PATCH 2/2 hwmon (occ): Prevent sysfs error attribute from returning error

The error sysfs attribute returns the stored error state of the OCC and doesn't depend on the OCC poll response. Therefore, split the error attribute into it's own function to avoid failing out of the function if the poll response fails.

---
 drivers/hwmon/occ/sysfs.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)
drivers/hwmon/occ/sysfs.c +13 -6
index 743b26ec..9bf1526 100644
@@ -71,9 +71,6 @@ static ssize_t occ_sysfs_show(struct device *dev,
 		else
 			val = 1;
 		break;
-	case 8:
-		val = occ->error;
-		break;
 	default:
 		return -EINVAL;
 	}
@@ -81,6 +78,16 @@ static ssize_t occ_sysfs_show(struct device *dev,
 	return snprintf(buf, PAGE_SIZE - 1, "%d\n", val);
 }
 
+static ssize_t occ_sysfs_error(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct occ *occ = dev_get_drvdata(dev);
+
+	occ_update_response(occ);
+
+	return snprintf(buf, PAGE_SIZE - 1, "%d\n", occ->error);
+}
+
 static SENSOR_DEVICE_ATTR(occ_master, 0444, occ_sysfs_show, NULL, 0);
 static SENSOR_DEVICE_ATTR(occ_active, 0444, occ_sysfs_show, NULL, 1);
 static SENSOR_DEVICE_ATTR(occ_dvfs_overtemp, 0444, occ_sysfs_show, NULL, 2);
@@ -89,7 +96,7 @@ static SENSOR_DEVICE_ATTR(occ_mem_throttle, 0444, occ_sysfs_show, NULL, 4);
 static SENSOR_DEVICE_ATTR(occ_quick_pwr_drop, 0444, occ_sysfs_show, NULL, 5);
 static SENSOR_DEVICE_ATTR(occ_state, 0444, occ_sysfs_show, NULL, 6);
 static SENSOR_DEVICE_ATTR(occs_present, 0444, occ_sysfs_show, NULL, 7);
-static SENSOR_DEVICE_ATTR(occ_error, 0444, occ_sysfs_show, NULL, 8);
+static DEVICE_ATTR(occ_error, 0444, occ_sysfs_error, NULL);
 
 static struct attribute *occ_attributes[] = {
 	&sensor_dev_attr_occ_master.dev_attr.attr,
@@ -100,7 +107,7 @@ static struct attribute *occ_attributes[] = {
 	&sensor_dev_attr_occ_quick_pwr_drop.dev_attr.attr,
 	&sensor_dev_attr_occ_state.dev_attr.attr,
 	&sensor_dev_attr_occs_present.dev_attr.attr,
-	&sensor_dev_attr_occ_error.dev_attr.attr,
+	&dev_attr_occ_error.attr,
 	NULL
 };
 
@@ -164,7 +171,7 @@ void occ_sysfs_poll_done(struct occ *occ)
 	}
 
 	if (occ->error && occ->error != occ->prev_error) {
-		name = sensor_dev_attr_occ_error.dev_attr.attr.name;
+		name = dev_attr_occ_error.attr.name;
 		sysfs_notify(&occ->bus_dev->kobj, NULL, name);
 	}
 
Signature · 1 line
2.7.4
#2 lore raw

Re: [PATCH dev-5.0 2/2] hwmon (occ): Prevent sysfs error attribute from returning error

Quoted 6 lines · Eddie James

The error sysfs attribute returns the stored error state of the OCC and doesn't depend on the OCC poll response. Therefore, split the error attribute into it's own function to avoid failing out of the function if the poll response fails.

Should this be sent upstream?

Quoted 69 lines
---
 drivers/hwmon/occ/sysfs.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)
drivers/hwmon/occ/sysfs.c +10 -3
index 743b26ec..9bf1526 100644
@@ -71,9 +71,6 @@ static ssize_t occ_sysfs_show(struct device *dev,
 		else
 			val = 1;
 		break;
-	case 8:
-		val = occ->error;
-		break;
 	default:
 		return -EINVAL;
 	}
@@ -81,6 +78,16 @@ static ssize_t occ_sysfs_show(struct device *dev,
 	return snprintf(buf, PAGE_SIZE - 1, "%d\n", val);
 }
 
+static ssize_t occ_sysfs_error(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct occ *occ = dev_get_drvdata(dev);
+
+	occ_update_response(occ);
+
+	return snprintf(buf, PAGE_SIZE - 1, "%d\n", occ->error);
+}
+
 static SENSOR_DEVICE_ATTR(occ_master, 0444, occ_sysfs_show, NULL, 0);
 static SENSOR_DEVICE_ATTR(occ_active, 0444, occ_sysfs_show, NULL, 1);
 static SENSOR_DEVICE_ATTR(occ_dvfs_overtemp, 0444, occ_sysfs_show, 

NULL, 2);

drivers/hwmon/occ/sysfs.c +1 -1
@@ -89,7 +96,7 @@ static SENSOR_DEVICE_ATTR(occ_mem_throttle, 0444, 
 occ_sysfs_show, NULL, 4);
 static SENSOR_DEVICE_ATTR(occ_quick_pwr_drop, 0444, occ_sysfs_show, 
 NULL, 5);
 static SENSOR_DEVICE_ATTR(occ_state, 0444, occ_sysfs_show, NULL, 6);
 static SENSOR_DEVICE_ATTR(occs_present, 0444, occ_sysfs_show, NULL, 7);
-static SENSOR_DEVICE_ATTR(occ_error, 0444, occ_sysfs_show, NULL, 8);
+static DEVICE_ATTR(occ_error, 0444, occ_sysfs_error, NULL);
 

static struct attribute *occ_attributes[] = {

drivers/hwmon/occ/sysfs.c +2 -2
 	&sensor_dev_attr_occ_master.dev_attr.attr,
@@ -100,7 +107,7 @@ static struct attribute *occ_attributes[] = {
 	&sensor_dev_attr_occ_quick_pwr_drop.dev_attr.attr,
 	&sensor_dev_attr_occ_state.dev_attr.attr,
 	&sensor_dev_attr_occs_present.dev_attr.attr,
-	&sensor_dev_attr_occ_error.dev_attr.attr,
+	&dev_attr_occ_error.attr,
 	NULL
 };
 
@@ -164,7 +171,7 @@ void occ_sysfs_poll_done(struct occ *occ)
 	}
 
 	if (occ->error && occ->error != occ->prev_error) {
-		name = sensor_dev_attr_occ_error.dev_attr.attr.name;
+		name = dev_attr_occ_error.attr.name;
 		sysfs_notify(&occ->bus_dev->kobj, NULL, name);
 	}
 
Signature · 1 line
2.7.4
#3 lore raw
In reply to Eddie James
Quoted 6 lines · Eddie James

The OCC driver limits the rate of sending poll commands to the OCC. If a user reads a hwmon entry after a poll response resulted in an error and is rate-limited, the error is invisible to the user. Fix this by storing the last error and returning that in the rate-limited case.

Should this be sent upstream?

Quoted 52 lines
---
 drivers/hwmon/occ/common.c | 4 ++++
 drivers/hwmon/occ/common.h | 3 ++-
 2 files changed, 6 insertions(+), 1 deletion(-)
drivers/hwmon/occ/common.c +4 -0
index c888f4a..0e812ef 100644
@@ -138,6 +138,7 @@ static int occ_poll(struct occ *occ)
 	/* mutex should already be locked if necessary */
 	rc = occ->send_cmd(occ, cmd);
 	if (rc) {
+		occ->last_error = rc;
 		if (occ->error_count++ > OCC_ERROR_COUNT_THRESHOLD)
 			occ->error = rc;
 
@@ -146,6 +147,7 @@ static int occ_poll(struct occ *occ)
 
 	/* clear error since communication was successful */
 	occ->error_count = 0;
+	occ->last_error = 0;
 	occ->error = 0;
 
 	/* check for safe state */
@@ -207,6 +209,8 @@ int occ_update_response(struct occ *occ)
 	if (time_after(jiffies, occ->last_update + OCC_UPDATE_FREQUENCY)) {
 		rc = occ_poll(occ);
 		occ->last_update = jiffies;
+	} else {
+		rc = occ->last_error;
 	}
 
 	mutex_unlock(&occ->lock);
drivers/hwmon/occ/common.h +2 -1
index 7c44df3..c676e48 100644
@@ -105,7 +105,8 @@ struct occ {
 	struct attribute_group group;
 	const struct attribute_group *groups[2];
 
-	int error;                      /* latest transfer error */
+	int error;                      /* final transfer error after retry */
+	int last_error;			/* latest transfer error */
 	unsigned int error_count;       /* number of xfr errors observed */
 	unsigned long last_safe;        /* time OCC entered "safe" state */
 
Signature · 1 line
2.7.4